
For the problem of low sensing accuracy of the integration requirement in the sixth generation mobile communication,a generation and transmission scheme of the integrated sensing and communication signals for terahertz-over-fiber system based on minimum frequency shift ke-ying(MSK)and linear frequency modulation(LFM)is proposed.The MSK-LFM signal is used to achieve both communication and sensing ranging in the terahertz band,and digital signal pro-cessing is adopted to improve the wireless communication bit error rate(BER)at the communica-tion receiver,and de-chirping technique is used for ranging at the sensing receiver.Simulation re-sults show that the MSK-LFM signal can achieve a wireless communication rate of 8 Gbit·s-1 in the 235 GHz terahertz band,a distance resolution of 3.75 cm in distance sensing accuracy,and a communication BER below the soft judgement threshold.When the DC bias is 0.8,the 8 GHz bandwidth MSK-LFM signal can have balanced communication and sensing performances,and this scheme has higher sensing accuracy at the desired communication rate compared to the MPSK-LFM signal scheme.
提出了一种提高屏蔽栅沟槽型(Shielded-Gate Trench,SGT)金属氧化物半导体场效应晶体管(Metal Oxide Semiconductor Field Effect Transistor,MOSFET)雪崩耐量的方法.利用 Sentaurus 计算机辅助设计软件,通过调整屏蔽栅沟槽型 MOSFET元胞区接触孔宽度、深度、注入剂量和注入能量,以降低P型体区电阻,抑制寄生三极管的开启,提高器件雪崩耐量.测试结果表明,优化后的器件雪崩耐量相较基准条件由 518.2 mJ 提升至 583.2 mJ,提升约12.6%.
针对传统随机控制方法不能控制随机变量的高阶矩问题,提出一种基于粒子群-蒙特卡罗的概率密度函数(Probability Density Function,PDF)形状控制策略.通过设计多项式控制器和积分形式的目标函数,将 PDF形状控制问题转化为控制器增益的优化问题.采用粒子群算法优化PDF形状控制器的增益,同时引入蒙特卡罗方法求解定积分形式的目标函数,使得非线性随机系统状态变量的PDF形状与期望的PDF形状一致.实验结果表明,该控制策略能够解决PDF的形状控制问题,而且缩短了粒子群算法的计算时间,提升了粒子群算法在PDF形状控制器增益中的优化性能.
《西安邮电大学学报》是西安邮电大学主办的科学技术学术刊物,以追求真理、崇尚科学,坚持学术性和应用性并重为办刊宗旨.主要刊登通信与信息技术、电子科学与技术、计算机理论及技术、自动控制理论与技术、传统行业信息化以及信息产业管理与发展等相关理论研究的最新成果.
为提高超宽带(Ultra Wide Band,UWB)技术应用于室内运动环境的定位精度和抗干扰能力,提出一种改进的Chan-泰勒-卡尔曼双边双向(Chan-Taylor-Kalman-Improved Double-Sided,CTK-IDS)联合定位算法.该算法通过测距计算修正与预测拟合技术,以降低设备测距误差及提升测距精度,采用改进的双边双向测距(Improved Double-Sided Two-Way Ranging,IDS-TWR)算法计算信号传播时间.将Chan算法估计的位置坐标作为 Taylor 算法的初值点进行迭代,从而解算出运动员的位置坐标.最后,结合Kalman滤波进行坐标的二次估计,以减弱非视距、多径等环境因素的影响,实现运动员室内运动环境中的实时、精准定位.验证结果表明,在室内环境中使用该算法可以使移动标签位置的平均误差在 4~5 cm以内,最大定位误差不超过 13 cm.