
ObjectiveOil and gas port storage and transportation systems feature water–land coupling, intensive equipment distribution, and highly hazardous media. Accidents in these systems are characterized by multi-hazard interactions, cross-regional propagation, and high uncertainty. Existing accident simulation methods have difficulty accurately capturing accident evolution under complex port operating conditions. Therefore, the application characteristics and suitable scenarios of mainstream accident simulation methods need to be systematically reviewed. MethodsCentered on four procedures including scenario element extraction, element relationship analysis, accident scenario construction, and accident scenario deduction, literature review and cross-domain comparisons are employed. Research progress on dynamic Bayesian networks, Petri nets, Monte Carlo simulations, system safety analysis, and multi-model coupling is summarized. Comparisons are carried out across four dimensions: temporal evolution, spatial coupling, data dependency, and adaptability to port scenarios. ResultsBased on the above analysis, key limitations in scenario deduction for complex oil-gas port systems are identified: full-chain modeling deficiencies, dynamic land-water interactions, multi-hazard accident chain synergy, multi-model fusion, and practical engineering support. To address these limitations, a unified deduction framework is constructed, encompassing ships, terminals, storage tanks, pipelines, and marine environments. By combining dynamic Bayesian networks, Petri nets, Monte Carlo simulations, and numerical modeling, the framework characterizes the full accident lifecycle and translates outputs into actionable tools, including critical risk node lists, early-warning thresholds, resource allocation plans, evacuation routes, and emergency response measures. ConclusionFuture oil-gas port scenario deduction should advance toward coordinated deduction of full-chain storage and transportation systems, dynamic environment-coupled deduction, collaborative deduction of multi-hazard accident chains, digital-twin-driven real-time deduction, and integration of deduction and decision-making. Developing a whole-process dynamic deduction and intelligent decision-support system for complex port accidents will provide essential theoretical grounding and practical engineering references for risk control, accident evolution prediction, and full-chain emergency decision-making of complex storage and transportation systems in oil-gas ports.
ObjectiveVibration-induced fatigue failures in compressor inlet and outlet pipe girth welds have become increasingly prominent and pose a critical threat to the safe operation of natural gas compressor station pipelines. Current remaining-life assessment methods for girth welds with crack defects provide only theoretical frameworks, lacking calibrated parameters tailored to complex loads and specific materials. In particular, a scarcity of systematic crack-growth rate data under combined pressure-vibration conditions hinders the accurate prediction of remaining service life for girth welds with microdefects. MethodsA test-based method is proposed to predict the remaining service life of girth welds with microdefects on compressor inlet and outlet pipes. Focusing on these girth welds, an experimental platform capable of applying combined alternating-stress-vibration loading is established. Tests are conducted using field-derived parameters, including operational pressures, girth weld joint material specifications, and actual vibration spectral characteristics. Crack-growth magnitudes and corresponding time durations are obtained for X70-WPHY70 grade butt girth welds. Finally, limiting crack depths determined through Fitness-for-Service (FFS) defect assessments are applied to predict the remaining service life of girth welds with cracks. ResultsAfter more than 500 h of continuous loading under characteristic vibration spectra and fluctuating pressure, crack-growth behavior correlates with vibration acceleration. Remaining service life is extrapolated using the Paris law. At a low acceleration of 2.31 g (where 1 g = 9.8 m/s2), cracks exhibit no growth, leaving service life virtually unaffected. At 3.07 g, cracks begin to propagate, resulting in a predicted remaining service life of 6,267 h. When acceleration further increases to 6.20 g, crack-growth rates accelerate, reducing the predicted remaining service life to 4,402 h. ConclusionThe proposed method provides empirical test data and a quantitative framework for assessing safety and predicting the remaining service life of girth welds containing microdefects in compressor inlet and outlet pipes. Furthermore, it offers a benchmark for evaluating the integrity of welded joints subjected to similar complex loading conditions. This approach enhances the intrinsic safety of natural gas compressor station piping systems and effectively mitigates the risk of girth weld cracking failures.
ObjectiveGravity Compressed Air Energy Storage (G-CAES) offers advantages of large-scale, long-duration energy storage and flexible regulation. As a key underground structure, the vertical-shaft gas storage cavern must withstand cyclic internal pressure, temperature fluctuations, and sealing constraints during operation. To clarify temperature variations, structural stresses, and surrounding rock response mechanisms during cyclic charging and discharging, this study focuses on vertical-shaft gas storage caverns with a gradually enlarged lower section. By considering the multi-material coupling among the sealing steel liner, concrete lining, and surrounding rock, the study reveals the mechanical evolution law of the structural system of the vertical-shaft gas storage cavern under thermo-mechanical coupling. MethodsA three-dimensional finite element model of “sealing steel liner-concrete lining-surrounding rock” is established. The thermo-mechanical coupling numerical method is adopted to simulate cyclic operating processes including gas charging, gas storage and gas discharging. Spatiotemporal evolution characteristics of temperature field, stress field and displacement field are analyzed. Differences in near-wall heat accumulation and structural response under single-cycle and multi-cycle actions are compared, and load-controlling factors for key positions are further identified. Results(1) Near-wall temperatures exhibit a distinct three-stage “rise–slow rise–drop” pattern across the gas-charging, storage, and discharging stages, respectively. By the end of the fifth cycle’s charging and storage stages, peak temperatures reach approximately 30.7 °C at the steel liner inner wall and 30.2 °C at the concrete lining inner wall. Thermal disturbance is largely restricted to the sealing steel liner and the adjacent 1 m zone of concrete lining, with minimal response from the deep surrounding rock. (2) By the end of the fifth cycle’s charging and storage stages, the sealing steel liner experiences peak tensile and compressive stresses of approximately 9.90 MPa and −55.31 MPa, indicating a sufficient overall strength margin. Meanwhile, maximum tensile and compressive stresses in the concrete lining reach approximately 1.92 MPa and −3.49 MPa; however, localized tensile stresses near the shaft wall–bottom transition warrant further crack-resistance evaluation. (3) The radial displacement of the steel liner exhibits a “large in the middle and small at both ends” pattern, whereas the concrete lining undergoes outward bulging along its inner wall and inward contraction along its outer wall. While cumulative cyclic temperature rise drives a slow evolution of principal stresses and displacements in both the steel liner and concrete lining, the response of the surrounding rock remains minimal. ConclusionUnder cyclic operation, the vertical-shaft gas storage cavern with a gradually enlarged lower section maintains overall mechanical stability. Thermo-mechanical coupling primarily affects near-wall structural zones and local transition regions. These findings provide references for thermal management, targeted reinforcement, interface-structure optimization, and operational strategies for G-CAES facilities, and offer a basis for subsequent field-monitoring layout and long-term service-performance evaluation.
ObjectiveWith the in-depth implementation of the “Dual Carbon” strategy and the construction of the new energy substance-energy network, pipelines serve as the core national energy transportation infrastructure and an important carrier for the cross-temporal and spatial allocation of multi-energy media including hydrogen, ammonia, alcohol and carbon dioxide, as well as the support for renewable power consumption and closed-loop carbon cycles. Integrity management acts as the core measure to guarantee the safe and reliable operation of pipelines throughout their full life cycle, while the transportation of multi-energy media poses new challenges to pipeline integrity management. MethodsCentered on the full-life-cycle closed-loop management framework of “data collection and integration-high consequence area identification-risk assessment-inspection and monitoring-integrity assessment-risk mitigation, maintenance and repair-performance evaluation”, this paper reviews the development history and standardization achievements of oil and gas pipeline integrity management at home and abroad, systematically elaborates the research progress and technological breakthroughs of each core technical module, and emphatically analyzes the development status and existing industrial pain points of integrity management for new multi-media energy pipelines. ResultsOn the basis of the above review and analysis, this paper summarizes the key technical bottlenecks existing in the integrity management of multi-media energy pipelines in China at present, including incomplete dedicated standard systems for multi-medium pipeline integrity management, insufficient basic data on medium-material coupled failure, failure to consider differentiated hazard characteristics of various media in high-consequence-area identification and risk assessment, poor medium compatibility of inspection and monitoring equipment together with inadequate capability for micro-defect identification, the lack of corrections for medium-induced material degradation in integrity assessment, and insufficient technical means for repair, operation-maintenance and risk control under multi-medium service conditions. Targeted priority development directions of pipeline integrity management technologies adapted to the development of substance-energy network are proposed, namely developing dynamic high-consequence-area identification technology for multi-medium scenarios, establishing a multi-field coupled quantitative risk assessment system, retrofitting and upgrading medium-resistant inspection and monitoring equipment as well as building a digital-twin early-warning platform, formulating full-life-cycle integrity assessment methods for multi-medium pipelines, developing risk-mitigation, repair and maintenance technologies compatible with multi-medium operating conditions, and collaboratively promoting the development and implementation of three-level standard systems. ConclusionThe existing integrity management system oriented to traditional oil and gas pipelines cannot fully meet the safety control requirements of multi-media energy pipelines under the substance-energy network. A series of core key technologies need to be tackled intensively, and a complete set of integrity management technologies and standard systems applicable to new energy pipelines carrying hydrogen, ammonia, alcohol and carbon dioxide should be established, so as to provide theoretical support and practical reference for technological innovation and engineering application of integrity management of multi-media energy pipelines under the background of substance-energy network.
ObjectiveFor large-scale LNG tanks constructed on non-bedrock sites in practical engineering, a structural system combining pile-group foundations and isolation bearings is commonly adopted. Under seismic excitation, the coupling of site nonlinearity, pile-soil dynamic interaction, hysteretic energy dissipation of isolation bearings, and spatial propagation effects of seismic waves leads to more complex dynamic responses compared with tanks on bedrock sites. Most existing studies adopt the assumption of vertical uniform seismic wave input, which cannot reflect the propagation time and spatial phase differences at large-diameter tank foundations under obliquely incident seismic waves. MethodsFocusing on a planned 22 × 104 m3 concrete full-containment LNG tank on a non-bedrock site in China, this study establishes a three-dimensional integrated finite element model that incorporates multi-layer site soils, 379 piles in the pile group, elevated pile cap, LRB900 lead-rubber isolation bearings, and inner-tank and outer-tank structures. Soil nonlinearity is captured via equivalent linearization, while oblique Shear Vertical (SV) wave inputs are applied using the boundary-substructure method. Three real strong-motion records with distinct spectral characteristics are selected and uniformly scaled to a peak ground acceleration of 2.36 m/s2. Key seismic responses of the tank and pile foundation are compared and analyzed under incident angles of 30°, 45°, 60°, and 90° (vertical incidence). ResultsResults indicate that oblique wave incidence induces non-uniform seismic input across the foundation, driving coupled horizontal translation and global rotation of the tank. Compared to vertical incidence, the peak tank-wall acceleration shifts from the mid-height toward the dome. Internal force variations across incident angles stem from the coupling between multiple reflections and transmissions of SV waves in layered soils and site nonlinearity, peaking at a 30° incidence angle. Driven by the mechanical properties of isolation bearings, relative displacement at peak tank-wall displacement varies non-monotonically with incident angle. Nevertheless, under the same seismic record, peak tank-wall displacements at various incident angles stay within the allowable design limits of the tank structure. ConclusionFor large-scale LNG tanks on non-bedrock sites, seismic analysis and design should account for oblique wave incidence and spatially non-uniform foundation input as important influencing factors. Comprehensive identification of unfavorable responses of the tank and pile-group foundation requires evaluating ground motions across diverse spectral characteristics and incident angles. These findings provide references for seismic performance evaluation, critical response identification, and design optimization of base-isolated LNG tanks on non-bedrock sites.