Multi-temporal InSAR (MTI) applications pose challenges related to the availability of coherent scattering from the ground surface, the complexity of the ground deformations, the atmospheric artifacts, the visibility problems related to the ground elevation. Nowadays, several satellite missions are available providing interferometric SAR data at different wavelengths, spatial resolutions, and revisit time. A new interesting opportunity is provided by Sentinel-1 mission, which has a spatial resolution comparable to previous ESA C-band missions, and revisit times reduced to up to 6 days. It is envisioned that, by offering regular, global-scale coverage, improved temporal resolution and freely available imagery, Sentinel-1 will guarantee an increasing use of MTI for ground displacement investigations. According to these different SAR space-borne missions, the present work discusses current and future opportunities of MTI applications to ground instability monitoring. Issues related to coherent target detection and mean velocity precision will be addressed through a simple theoretical model assuming backscattering mechanisms related to point scatterers. The paper also presents an example of multi-sensor ground instability investigation over the site of Marina di Lesina, Southern Italy, a village lying over a gypsum diapir, where a hydration process, involving the underlying anhydride, causes a smooth uplift pattern affecting the entire village area, and the formation of scattered sinkholes. More than 20 years of MTI SAR data have been used, coming from both legacy ERS and ENVISAT missions, and last-generation Radarsat-2, COSMO-SkyMed, and Sentinel-1A sensors.
Ground Control Points (GCP), automatically extracted from Synthetic Aperture Radar (SAR) images through 3D stereo analysis, can be effectively exploited for an automatic orthorectification of optical imagery if they can be robustly located in the basic optical images. The present study outlines a SAR/Optical cross-matching procedure that allows a robust alignment of radar and optical images, and consequently to derive automatically the corresponding sub-pixel position of the GCPs in the optical image in input, expressed as fractional pixel/line image coordinates. The cross-matching in performed in two subsequent steps, in order to gradually gather a better precision. The first step is based on the Mutual Information (MI) maximization between optical and SAR chips while the last one uses the Normalized Cross-Correlation as similarity metric. This work outlines the designed algorithmic solution and discusses the results derived over the urban area of Pisa (Italy), where more than ten COSMO-SkyMed Enhanced Spotlight stereo images with different beams and passes are available. The experimental analysis involves different satellite images, in order to evaluate the performances of the algorithm w.r.t. the optical spatial resolution. An assessment of the performances of the algorithm has been carried out, and errors are computed by measuring the distance between the GCP pixel/line position in the optical image, automatically estimated by the tool, and the “true” position of the GCP, visually identified by an expert user in the optical images.
The aim of this work is to exploit the potential of AMSR2 for hydrological applications on a regional scale and in heterogeneous environments characterised by different surface covers at subpixel resolution. The soil moisture content (SMC) estimated from Advanced Microwave Scanning Radiometer 2 (AMSR2) through the ANN-based “HydroAlgo” algorithm is firstly compared with the outputs of the Soil Water Balance hydrological model (SWBM). The comparison is performed over Italy, by considering all the available overpasses of AMSR2, since July 2012. The SMC generated by HydroAlgo is then considered as input for generating a rainfall product through the SM2RAIN algorithm. The comparison between observed and estimated rainfall in central Italy provided satisfactory results with a substantial room for improvement. In this work, the ANN “HydroAlgo” algorithm [1], which was originally developed for AMSR-E, was adapted and re-trained for AMSR2, accounting for the two C band channels provided by this new sensor. The disaggregation technique implemented in HydroAlgo [2], devoted to the improvement of ground resolution, made this algorithm particularly suitable for the application to such a heterogeneous environment. The algorithm allows obtaining a SMC product with enhanced spatial resolution (0.1°), which is more suitable for hydrological applications. The AMSR2 derived SMC is compared with simulated data obtained from the application of a well-established soil water balance model [3]. The training and test of the algorithm are carried out on a test area in central Italy, while the entire Italy is considered for the validation. The last step of the activity is the use of the HydroAlgo SMC into the SM2RAIN algorithm [4], in order to exploit the potential contribution of this product at enhanced resolution for rainfall estimation. [1] E. Santi, S. Pettinato, S. Paloscia, P. Pampaloni, G. Macelloni, and M. Brogioni (2012), “An algorithm for generating soil moisture and snow depth maps from microwave spaceborne radiometers: HydroAlgo”, Hydrology and Earth System Sciences, 16, pp. 3659-3676, doi:10.5194/hess-16-3659-2012. [2] E. Santi (2010), “An application of SFIM technique to enhance the spatial resolution of microwave radiometers”, Intern. J. Remote Sens., vol. 31, 9, pp. 2419-2428. [3] L. Brocca, S. Camici, F. Melone, T. Moramarco, J. Martinez-Fernandez, J.-F. Didon-Lescot, R. Morbidelli (2014), “Improving the representation of soil moisture by using a semi-analytical infiltration model”, Hydrological Processes, 28(4), pp. 2103-2115, doi:10.1002/hyp.9766. [4] Brocca, L., Ciabatta, L., Massari, C., Moramarco, T., Hahn, S., Hasenauer, S., Kidd, R., Dorigo, W., Wagner, W., Levizzani, V. (2014). Soil as a natural rain gauge: estimating global rainfall from satellite soil moisture data. Journal of Geophysical Research, 119(9), 5128-5141, doi:10.1002/2014JD021489.
Rheticus (R) is an innovative cloud-based data and services hub able to deliver Earth Observation added-value products through automatic complex processes and, if appropriate, a minimum interaction with human operators. In this paper, we outlines the capabilities of the "Rheticus (R) Displacement" service, designed for geohazard and infrastructure monitoring through Multi-Temporal SAR Interferometry techniques.
Ground based Synthetic Aperture Radar Interferometry (GBInSAR) can set the right baseline according to the monitoring area, which is more freedom and convenient maneuverability and has been used on deformation monitoring of buildings, Bridges, etc. However, in the process of GBInSAR monitoring, atmospheric disturbances is a key factor affected the accuracy of the monitoring. According to the statistical characteristics in monitoring area images, the paper selected the Permanent Scatters (PS) points, established Delaunay triangulation and acquired the atmospheric correction of GBInSAR monitoring data for by linear interpolation. As the same time, the paper used the fixed point method to calculate the atmospheric disturbance. Then, the paper compared the both methods' corrected results with high precision vertical data. The results showed that the PS method was better than the fixed point method. The PS method can better correct the atmospheric disturbances elements in the GBInSAR monitoring sequence, which provided reference value for further popularization and application of GBInSAR.
