Identifying active sites in FeNC catalysts for oxygen reduction reactions (ORR) and active site changes during preparation, storage, and electrochemical cycling are key challenges in the quest for improved catalysts. In this work, high-resolution transmission electron microscopy (TEM) is combined with 57Fe Mössbauer and electron paramagnetic resonance (EPR) spectroscopies to investigate iron centers in high-performance FeNC catalysts with regard to their structure, coordination, and oxidation and spin states. Reversible and irreversible changes during storage, the preparation of FeNC electrodes, and their use in electrochemical cells are investigated by complementary spectroelectrochemical Mössbauer and EPR methods. Microscopy of the as-prepared FeNC materials reveals iron to be evenly distributed in isolated sites or a few atoms containing sites. Mössbauer and EPR identify weakly and strongly magnetically coupled high-spin Fe(III) in rhombically distorted octahedral coordination or superparamagnetic clusters, high-spin Fe(II) sixfold coordinated in iron oxides, and intermediate-spin Fe(II) in square planar coordination. Upon oxygen exposure, a notable oxidation state change from Fe(II) to Fe(III) is observed, the iron is less evenly distributed, and larger iron oxide nanoparticles are formed. It is noted that for this catalyst, before and after oxygen exposure, most of the iron is bound in iron oxide structures. Under the applied potential, Fe(III) is partially reduced to Fe(II) in clustered and isolated or weakly coupled sites. This change is mostly reversible, suggesting structural retention of the majority of the catalyst.

Metalloproteins tune the electronic properties of metal active sites through a combination of primary and secondary coordination sphere effects (PCS and SCS) to efficiently perform an array of redox chemistry, including electron transfer (ET) and catalysis. A major influence of these effects is the anisotropic spatial distribution of redox-active molecular orbitals (RAMOs), which in turn dictates redox chemistry of the metalloproteins. While much progress has been made in understanding the SCS effects on RAMOs in individual native metalloproteins, it has been difficult to experimentally examine the influence of the same SCS effects on RAMOs with different spatial distributions. Taking advantage of our recent studies of SCS effect on blue copper azurin from Pseudomonas aeruginosa (Blue CuAz) and its M121H/H46E variant that closely mimic the red copper protein (Red CuAz), in which their RAMOs are dominated by either Cu-Sπ or Cu-Sσ interactions, respectively, we herein compare and contrast how the same SCS modifications impact the electronic and geometric structures of blue and red Cu center in the same protein scaffold. Specifically, we expand our understanding of unpaired electron distribution at the Cu-binding site of Red CuAz and its SCS N47S, F114P, and F114N mutations using 1H and 14N electron-nuclear double resonance (ENDOR) spectroscopy, and then further combine these data sets with recent studies and DFT calculations to provide insight into how these mutations differentially (or similarly) impact electronic structure in Red vs. Blue CuAz. We find that electrostatics produce similar effects in both Red and Blue CuAz, where the introduction of dipole moments in the vicinity of Cu and S produces changes in spin density distribution and of the same sign and comparable magnitude. However, disruption of H-bonding with S through the F114P mutation leads to opposing effects in Red vs. Blue CuAz, which we propose arise from differences in the conformation of Cys112 sidechain adapted in the absence the stabilizing SC112⋯H-N backbone interaction.

We developed a technique allowing the direct observation of photoinduced charge-transfer states (CTSs)-the weakly coupled electron-hole pairs preceding the completely separated charges in organic photovoltaic (OPV) blends. Quadrature detection of the electron spin echo (ESE) signal enables the observation of an out-of-phase ESE signal of CTS. The out-of-phase Electron-Electron Double Resonance (ELDOR) allows measuring electron-hole distance distributions within CTS and its temporal evolution in the microsecond range. The technique was applied to OPV bulk heterojunction blends of different donor polymers, including the benchmark polymer P3HT and the high-performance polymer PCDTBT, with the fullerene PC61BM acceptor. The corresponding electron-hole distance distributions were obtained using the Tikhonov regularization. It was found that not only the dipolar interaction but also the exchange interaction contributes to the formation of the out-of-phase ELDOR signal. By varying the delay time after photoexcitation, we observed CTSs at different stages of charge separation. The initial distribution of the electron-hole distances for different blends correlates with their photoelectric conversion efficiency, with shorter average thermalization distances found for the blends of PC61BM with the less efficient regiorandom polymer P3HT. Spin-selective recombination of the CTS was unambiguously demonstrated for the blend of regioregular P3HT with PC61BM. It produces characteristic features in the out-of-phase ELDOR trace for small "dipolar" evolution times. These data allow us to estimate the CTS recombination rate for a certain distance between the electron and the hole within the CTS. The proposed method can be used to probe CTS in a variety of OPV active layer materials.

Nickel photoredox catalysis has resulted in a rich development of transition-metal-catalysed transformations for carbon-heteroatom bond formation. By harnessing light energy, the transition metal can attain oxidation states that are difficult to achieve through thermal chemistry in a catalytic manifold. For example, nickel photoredox reactions have been reported for both the synthesis of anilines and aryl ethers from aryl(pseudo)halides. However, oxidative addition to simple nickel systems is often sluggish in the absence of special, electron-rich ligands, leading to catalyst decomposition. Electron-rich aryl electrophiles therefore currently fall outside the scope of many transformations in the field. Here we provide a conceptual solution to this problem and demonstrate nickel-catalysed C-heteroatom bond-forming reactions of arylthianthrenium salts, including amination, oxygenation, sulfuration and halogenation. Because the redox properties of arylthianthrenium salts are primarily dictated by the thianthrenium, oxidative addition of highly electron-rich aryl donors can be unlocked using simple NiCl2 under light irradiation to form the desired C-heteroatom bonds. Photoredox-catalysed coupling of electron-rich aryl electrophiles based on simple nickel salts usually suffers from a slow oxidative addition. Now, it is shown that thianthrenation leads to more favourable redox properties of the substrates, alleviating this problem in carbon-heteroatom bond-forming reactions.

Radical cross-coupling reactions represent a revolutionary tool to forge C(sp3)–C and C(sp3)–heteroatom bonds, by means of transition metals, photoredox or electrochemical approaches. This study demonstrates how a low-valent bismuth complex is able to undergo one-electron oxidative addition with redox-active alkyl radical precursors in an autonomous manner, mimicking the behavior of first-row transition metals. This reactivity paradigm for bismuth gives rise to unique radical-equilibrium complexes, which could be fully characterized in solution and solid state. The resulting Bi(III)–C(sp3) intermediates display divergent reactivity patterns depending on the α-substituents of the alkyl fragment. Mechanistic investigations on this reactivity led to the development of a bismuth-catalyzed C(sp3)–N cross-coupling reaction that operates under mild conditions and accommodates synthetically relevant N-heterocycles as coupling partners.

[FeFe] hydrogenases are exceptionally active catalysts for the interconversion of molecular hydrogen with protons and electrons. Their active site, the H-cluster, is composed of a [4Fe-4S] cluster covalently linked to a unique [2Fe] subcluster. These enzymes have been extensively studied to understand how the protein environment tunes the properties of the Fe ions for efficient catalysis. The sensory [FeFe] hydrogenase (HydS) from Thermotoga maritima has low activity and displays a very positive redox potential for the [2Fe] subcluster compared to that of the highly active prototypical enzymes. Using site directed mutagenesis, we investigate how second coordination sphere interactions of the protein environment with the H-cluster in HydS influence the catalytic, spectroscopic and redox properties of the H-cluster. In particular, mutation of the non-conserved serine 267, situated between the [4Fe-4S] and [2Fe] subclusters, to methionine (conserved in prototypical catalytic enzymes) gave a dramatic decrease in activity. Infra-red (IR) spectroelectrochemistry revealed a 50 mV lower redox potential for the [4Fe-4S] subcluster in the S267M variant. We speculate that this serine forms a hydrogen bond to the [4Fe-4S] subcluster, increasing its redox potential. These results demonstrate the importance of the secondary coordination sphere in tuning the catalytic properties of the H-cluster in [FeFe] hydrogenases and reveal a particularly important role for amino acids interacting with the [4Fe-4S] subcluster.

Herein, we report the synthesis, isolation, and characterization of two cationic organobismuth(II) compounds bearing N,C,N pincer frameworks, which model crucial intermediates in bismuth radical processes. X-ray crystallography uncovered a monomeric Bi(II) structure, while SQUID magnetometry in combination with NMR and EPR spectroscopy provides evidence for a paramagnetic S = 1/2 state. High-resolution multifrequency EPR at the X-, Q-, and W-band enable the precise assignment of the full g- and 209Bi A-tensors. Experimental data and DFT calculations reveal both complexes are metal-centered radicals with little delocalization onto the ligands.

The intermolecular cleavage of C-C bonds is a rare event. Herein, we report on a late transition-metal terminal nitrido complex, which upon oxidation undergoes insertion of the nitrido nitrogen atom into the aromatic C-C bond of ferrocene. This reaction path was confirmed through 15N and deuterium isotope labeling experiments of the nitrido complex and ferrocenium, respectively. Cyclic voltammetry and UV/vis spectroscopy monitoring of the reaction revealed that oxidation is the initial step, yielding the tentative radical cationic nitrido complex, which is experimentally supported by extended X and Q-band electron paramagnetic resonance (EPR) and ENDOR, UV/vis, vT 1H NMR, and vibrational spectroscopic data. Density functional theory (DFT) and multireference calculations of this highly reactive intermediate revealed an S = 1/2 ground state. The high reactivity can be traced to the increased electrophilicity in the oxidized complex. Based on high-level PNO-UCCSD(T) calculations and UV/vis kinetic measurements, it is proposed that the reaction proceeds by initial electrophilic exo attack of the nitrido nitrogen atom at the cyclopentadienyl ring and consecutive ring expansion to a pyridine ring.

The oxidative addition of aryl electrophiles is a fundamental organometallic reaction widely applied in the field of transition metal chemistry and catalysis. However, the analogous version based on main group elements still remains largely underexplored. Here, we report the ability of a well-defined organobismuth(I) complex to undergo formal oxidative addition with a wide range of aryl electrophiles. The process is facilitated by the reactivity of both the ground and excited states of N,C,N-bismuthinidenes upon absorption of low-energy red light.

Large spin-orbit coupling (SOC) is an intrinsic property of the heavy elements that directly affects the electronic structures of the compounds. In this work, we report the synthesis and characterization of a monocoordinate bismuthinidene that features a rigid and bulky ligand. All magnetic measurements [superconducting quantum interference device (SQUID), nuclear magnetic resonance (NMR)] point to a diamagnetic compound. However, multiconfigurational quantum chemical calculations predict the ground state of the compound to be dominated (76%) by a spin triplet. The apparent diamagnetism is explained by an extremely large SOC-induced positive zero-field splitting of more than 4500 wavenumbers that leaves the M S = 0 magnetic sublevel thermally isolated in the electronic ground state.

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

Herein, a regioselective, late-stage two-step arene halogenation method is reported. We propose how unusual Ni(I)/(III) catalysis is enabled by a combination of aryl thianthrenium and Ni redox properties that is hitherto unachieved with other (pseudo)halides. The catalyst is accessed in situ from inexpensive NiCl2·6(H2O) and zinc without the need of supporting ligands.

The development of catalytic chemical processes that enable the revalorization of nitrous oxide (N 2 O) is an attractive strategy to alleviate the environmental threat posed by its emissions 1–6 . Traditionally, N 2 O has been considered an inert molecule, intractable for organic chemists as an oxidant or O-atom transfer reagent, owing to the harsh conditions required for its activation (>150 °C, 50‒200 bar) 7–11 . Here we report an insertion of N 2 O into a Ni‒C bond under mild conditions (room temperature, 1.5–2 bar N 2 O), thus delivering valuable phenols and releasing benign N 2 . This fundamentally distinct organometallic C‒O bond-forming step differs from the current strategies based on reductive elimination and enables an alternative catalytic approach for the conversion of aryl halides to phenols. The process was rendered catalytic by means of a bipyridine-based ligands for the Ni centre. The method is robust, mild and highly selective, able to accommodate base-sensitive functionalities as well as permitting phenol synthesis from densely functionalized aryl halides. Although this protocol does not provide a solution to the mitigation of N 2 O emissions, it represents a reactivity blueprint for the mild revalorization of abundant N 2 O as an O source.

The development of unconventional strategies for the activation of ammonia (NH3) and water (H2O) is of capital importance for the advancement of sustainable chemical strategies. Herein we provide the synthesis and characterization of a Radical Equilibrium Com-plex based on bismuth featuring an extremely weak Bi‒O bond, that permits the in situ generation of reactive Bi(II) species. The en-suing organobismuth(II) engages with various ammines and alcohols and exerts an unprecedented effect onto the X‒H, leading to low BDFEX-H. As a result, radical activation of various N‒H and O‒H bonds—including ammonia and water—occurs in seconds at room temperature, delivering well-defined Bi(III)-amido and -alkoxy complexes. Moreover, we demonstrate that the resulting Bi(III)‒N complexes engage in a unique reactivity pattern with the triad of H+, H‒ and H· sources, thus providing alternative pathways for main group chemistry.

[FeFe] hydrogenases are highly active catalysts for hydrogen conversion. Their active site has two components: a [4Fe-4S] electron relay covalently attached to the H-2 binding site and a diiron cluster ligated by CO, CN-, and 2-azapropane-1,3-dithiolate (ADT) ligands. Reduction of the [4Fe-4S] site was proposed to be coupled with protonation of one of its cysteine ligands. Here, we used time-resolved infrared (TRIR) spectroscopy on the [FeFe] hydrogenase from Chlamydomonas reinhardtii (CrHydA1) containing a propane-1,3-dithiolate (PDT) ligand instead of the native ADT ligand. The PDT modification does not affect the electron transfer step to [4Fe-4S](H) but prevents the enzyme from proceeding further through the catalytic cycle. We show that the rate of the first electron transfer step is independent of the pH, supporting a simple electron transfer rather than a proton-coupled event. These results have important implications for our understanding of the catalytic mechanism of [FeFe] hydrogenases and highlight the utility of TRIR.

Gut microbial production of trimethylamine (TMA) from l-carnitine is directly linked to cardiovascular disease. TMA formation is facilitated by carnitine monooxygenase, which was proposed as a target for the development of new cardioprotective compounds. Therefore, the molecular understanding of the two-component Rieske-type enzyme from Escherichia coli was intended. The redox cofactors of the reductase YeaX (FMN, plant-type [2Fe-2S] cluster) and of the oxygenase YeaW (Rieske-type [2Fe-2S] and mononuclear [Fe] center) were identified. Compounds meldonium and the garlic-derived molecule allicin were recently shown to suppress microbiota-dependent TMA formation. Based on two independent carnitine monooxygenase activity assays, enzyme inhibition by meldonium or allicin was demonstrated. Subsequently, the molecular interplay of the reductase YeaX and the oxygenase YeaW was addressed. Chimeric carnitine monooxygenase activity was efficiently reconstituted by combining YeaX (or YeaW) with the orthologous oxygenase CntA (or reductase CntB) from Acinetobacter baumannii. Partial conservation of the reductase/oxygenase docking interface was concluded. A structure guided mutagenesis approach was used to further investigate the interaction and electron transfer between YeaX and YeaW. Based on AlphaFold structure predictions, a total of 28 site-directed variants of YeaX and YeaW were kinetically analyzed. Functional relevance of YeaX residues Arg271, Lys313 and Asp320 was concluded. Concerning YeaW, a docking surface centered around residues Arg83, Lys104 and Lys117 was hypothesized. The presented results might contribute to the development of TMA-lowering strategies that could reduce the risk for cardiovascular disease.

Modulating the electronic structures of main group element compounds is crucial to control their chemical reactivity. Herein we report on the synthesis, frontier orbital modulation, and one-electron oxidation of two L(X)Ga-substituted diphosphenes [L(X)GaP]2 (X = Cl 2a, Br 2b; L = HC[C(Me)N(Ar)]2, Ar = 2,6-i-Pr2C6H3). Photolysis of L(Cl)GaPCO 1 gave [L(Cl)GaP]22a, which reacted with Me3SiBr with halide exchange to [L(Br)GaP]22b. Reactions with MeNHC (MeNHC = 1,3,4,5-tetramethylimidazol-2-ylidene) gave the corresponding carbene-coordinated complexes L(X)GaPP(MeNHC)Ga(X)L (X = Cl 3a, Br 3b). DFT calculations revealed that the carbene coordination modulates the frontier orbitals (i.e. HOMO/LUMO) of diphosphenes 2a and 2b, thereby affecting the reactivity of 3a and 3b. In marked contrast to diphosphenes 2a and 2b, the cyclic voltammograms (CVs) of the carbene-coordinated complexes each show one reversible redox event at E 1/2 = -0.65 V (3a) and -0.36 V (3b), indicating their one-electron oxidation to the corresponding radical cations as was confirmed by reactions of 3a and 3b with the [FeCp2][B(C6F5)4], yielding the radical cations [L(X)GaPP(MeNHC)Ga(X)L]B(C6F5)4 (X = Cl 4a, Br 4b). The unpaired spin in 4a (79%) and 4b (80%) is mainly located at the carbene-uncoordinated phosphorus atoms as was revealed by DFT calculations and furthermore experimentally proven in reactions with n Bu3SnH, yielding the diphosphane cations [L(X)GaPHP(MeNHC)Ga(X)L]B(C6F5)4 (X = Cl 5a, Br 5b). Compounds 2-5 were fully characterized by NMR and IR spectroscopy as well as by single crystal X-ray diffraction (sc-XRD), and compounds 4a and 4b were further studied by EPR spectroscopy, while their bonding nature was investigated by DFT calculations.

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

Isolation and stabilization of main group diradical species have posed a synthetic challenge over the years due to their intrinsic high reactivity. Herein we report on a large-scale synthesis and isolation of a mono-coordinate bismuthinidene featuring a rigid and bulky ligand, which protects the Bi(I) center. The compound was characterized by its unique spectroscopic features (UV-vis and NMR), but more prominently, by its magnetic properties. Multiconfigurational quantum chemical calculations predict the ground state of the compound to be dominated by a spin-triplet. Further support for this electronic structure description was obtained through correlation of theory to experimental XRD, XAS, and UV-Vis data. However, all magnetic measurements (EPR, NMR and SQUID) point to a diamagnetic compound. This apparent discrepancy can be explained by an extremely large spin-orbit coupling (SOC) that leads to an unprecedented zero-field splitting of more than 8000 cm‒1, thus leaving a MS = 0 magnetic sublevel thermally isolated in the electronic ground state. The extremely large SOC effect is a result of the low-coordination number of the bismuth center in interplay with its heavy element nature.