It is well known that the control of the crystallization of drugs to ensure that only the approved and desired polymorph is present in the formulation is a crucial point of a preformulation study. In this regard, the aim of the present work is to devise a method for the quantification of the polymorphic purity of nateglinide in mixtures formed by polymorphs H and B. In order to achieve this goal, binary systems of known composition have been prepared and the melting peaks of both polymorphs have been recorded by differential scanning calorimetry. Experiments have determined that the method of preparation of the mixtures has to be carefully evaluated. Indeed it has been shown that grinding the samples induces transition from B to H form. Furthermore, it could be observed that the enrichment of the binary mixture with H form is caused by heating. Therefore, after having prepared the mixture without grinding stage, we propose a method to evaluate the content of H polymorph in mixture with the B one from the melting peak of B.

New modifications of the antidiabetic drug nateglinide were found and characterized by means of thermal analysis, vibrational spectroscopy and X-ray powder diffractometry. In particular it has been verified that the product obtained during the final steps of the nateglinide synthesis is the hemihydrate form which melts at about 86 degrees C provided that the adopted experimental conditions hinder the removal of the crystallization water. Otherwise, if the crystallization water is removed, the hemihydrate transforms to a new anhydrous polymorph that melts at 102.8 degrees C. The anhydrous polymorph, if stored at room temperature and humidity, gradually changes to H polymorph while, if stored in water vapour saturated atmosphere, it gets back water and reverts to the hemihydrate form. On the contrary, both an isothermal treatment at 80 degrees C and melt cooling bring to the B polymorph.

The physico-chemical characterization of the polymorphs of nateglinide (named B, H and S), an antidiabetic agent, has been performed by means of thermal, diffractometric, spectroscopic and electron microscopic measurements. It has been established that S polymorph can crystallize from the melt obtained from both B and H samples or also following an isothermal treatment of both forms at temperatures lower than the relevant melting points. By X-ray diffraction it could be shown that the three polymorphs have different crystal structure. On the other hand the indication has been drawn from IR spectra that the molecular structure of B is sensibly different from those of H and S forms that have a very similar molecular structure. Finally, the microstructure features of the three polymorphs have been examined by scanning electron microscopy. Our analyses have allowed to evaluate the relative stability of the three polymorphs through the construction of the energy vs. temperature diagram. In particular, S polymorph, the highest-melting form, has resulted to be the only stable form, while the B and H forms are metastable.

Thermoanalytical (differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), thermogravimetric analysis coupled with Fourier transform infrared spectroscopy (TG/FTIR)) and spectroscopic (X-ray diffraction (XRD), ultraviolet-visible (UV-Vis), mass spectrometry (MS) and Fourier transform infrared diffuse reflectance (DRIFT) measurements have been used to characterise solid-state retinoic acid (RA) from a chemico-physical point of view. Between 130 and 160 degrees C, a phase transition takes place that does not correspond to the transition between the known monoclinic and triclinic phases (DSC and XRD evidence). By annealing in air (in the 130-160 degrees C temperature range and for different times), an exothermic oxidative degradation occurs that, depending on the thermal treatment, competes with the mentioned phase transition (TGA evidence). Spectroscopic techniques (UV-Vis, MS and DRIFT) allow one to conclude that the new solid phase is still constituted by retinoic acid with a different orientation of the side chain. Finally, RA does not undergo stable melting: the fragmentation patterns, both in air and in nitrogen, have been examined by TG/FTIR.