An amendment to this paper has been published and can be accessed via a link at the top of the paper.

On February 14, 2011 Stardust-NExT (SN) flew by Comet Tempel 1, the target of the Deep Impact (DI) mission in 2005, obtaining dust measurements and high-resolution images of areas surrounding the 2005 impact site, and extending image coverage to almost two thirds of the nucleus surface. The nucleus has an average radius of 2.83 +/- 0.1 km and a uniform geometric albedo of about 6% at visible wavelengths. Local elevation differences on the nucleus reach up to 830 m. At the time of encounter the spin rate was 213 degrees per day (period = 40.6 h) and the comet was producing some 130 kg of dust per second. Some 30% of the nucleus is covered by smooth flow-like deposits and related materials, restricted to gravitational lows. This distribution is consistent with the view that the smooth areas represent material erupted from the subsurface and date from a time after the nucleus achieved its current shape. It is possible that some of these eruptions occurred after 1609 when the comet's perihelion distance decreased from 3.5 AU to the current 1.5 AU. Much of the surface displays evidence of layering: some related to the smooth flows and some possibly dating back to the accretion of the nucleus. Pitted terrain covers approximately half the nucleus surface. The pits range up to 850 m in diameter. Due to their large number, they are unlikely to be impact scars: rather they probably result from volatile outbursts and sublimational erosion. The DI impact site shows a subdued depression some 50 m in diameter implying surface properties similar to those of dry, loose snow. It is possible that the 50-m depression is all that remains of an initially larger crater. In the region of overlapping DI and SN coverage most of the surface remained unchanged between 2005 and 2011 in albedo, photometric properties and morphology. Significant changes took place only along the edges of a prominent smooth flow estimated to be 10-15 m thick, the margins of which receded in places by up to 50 m. Coma and jet activity were lower in 2011 than in 2005. Most of the jets observed during the SN flyby can be traced back to an apparently eroding terraced scarp. The dust instruments detected bursts of impacts consistent with a process by which larger aggregates of material emitted from the nucleus subsequently fragment into smaller particles within the coma. (c) 2012 Elsevier Inc. All rights reserved.

This three-part Sample Return Primer and Handbook provides a road map for conducting the terminal phase of a sample return mission. The main chapters describe element-by-element analyses and trade studies, as well as required operations plans, procedures, contingencies, interfaces, and corresponding documentation. Based on the experiences of the lead Stardust engineers, the topics include systems engineering (in particular range safety compliance), mission design and navigation, spacecraft hardware and entry, descent, and landing certification, flight and recovery operations, mission assurance and system safety, test and training, and the very important interactions with external support organizations (non-NASA tracking assets, landing site support, and science curation).

On 2 January 2004 during its historic flight to return cometary dust samples to earth, the STARDUST spacecraft flew within the coma of comet Wild 2 and also took 72 images where the surface was resolved during the flyby. A combination of long and short exposures was used to observe the jets and the surface. Comet Surface: The images revealed a planetary body, one not having a significant atmosphere, quite different from any other such body seen from other spacecraft. Surface depressions, potentially a combination of craters and vents, were not bowl-shaped but typically had steep walls and flattened floors. One depression considered to be a vent, the source of a jet, had a depth to diameter ratio of approx.0.4, with near vertical walls. Jets: At least 10 to possibly 20 jets were active during the flyby. Some were traced back to the surface where they seem to originate from the near vertical walls of depressions (vents) that were facing the sun, having the highest solar insolation.

On January 2, 2004 the Stardust spacecraft completed a close flyby of comet Wild2 (P81). Flying at a relative speed of 6.1 km/s within 237km of the 5 km nucleus, the spacecraft took 72 close-in images, measured the flux of impacting particles and did in-situ compositional analysis of freshly released dust with a time-of-flight mass spectrometer. The primary goal of the mission is to collect >500 particles >15 m diameter and return them to Earth on January 15, 2006. The cometary particles ranging in size from a micron to approx.100 microns were collected in low density silica aerogel. After returning over a hundred 2x4x3 cm aerogel collection cells will be processed at the curatorial facility at the NASA Johnson Space Center and 5 to 100 micron size extracted cometary particles will be distributed to analysts by a system that will be based on the allocation procedures for cosmic dust, Antarctic meteorites and lunar samples.