Tire and Road Wear Particles (TRWP) are produced during the wear of tire rubber on the road pavement and contain various chemicals originating from the road environment and from the rubber. Toxic effects of TRWP and their associated chemicals on soil organisms remain poorly characterized. In a series of laboratory experiments, this study investigated the bioaccumulation kinetics of several common tire-related chemicals in the earthworm species Eisenia andrei using Cryogenically Milled Tire Tread (CMTT), as a surrogate for environmental TRWP. Effects on survival, growth, reproductive output and behaviour were determined. Average biota-soil accumulation factors ranged from 0.8 to 4.7 indicating low to moderate bioaccumulation of the tire-related chemicals. Toxicokinetics showed both high uptake (0.0-13.2 days-1) and elimination rates (0.0-6.3 days-1) in E.andrei. Still, the uptake of tire-related chemicals in earthworms' tissues and ingestion of tire particles could lead to trophic transfer to preys feeding on earthworms and requires further investigated. No significant effects on survival and growth were recorded after exposure to 0.05 and 5% CMTT. In the reproduction test, a slight increase of the reproductive output with increasing CMTT concentration and a slight decrease of the weight of the juveniles were observed. Moreover, a strong and significant avoidance behaviour was observed for worms exposed to 5% CMTT. This work highlights that soil highly contaminated with tire particles can negatively impact habitat function due to changes in texture and/or chemical stressors, lead to uptake of tire-related additives by earthworms and that high concentrations can impact organism's fitness.

Many chemicals in food packaging can leach as complex mixtures to food, potentially including substances hazardous to consumer health. Detecting and identifying all of the leachable chemicals are impractical with current analytical instrumentation and data processing methods. Therefore, our work aims to expand the analytical toolset for prioritizing and identifying chemical hazards in food packaging. We used a high-performance thin-layer chromatography (HPTLC)-based bioassay to detect genotoxic fractions in paperboard packaging. These fractions were then processed with non-targeted liquid chromatography high-resolution mass spectrometry (LC-HRMS/MS) and machine learning-based toxicity prediction (MLinvitroTox). The HPTLC bioassay detected four genotoxic zones in extracts of the paperboard. One-dimensional HPTLC separation and targeted fraction collection reduced the number of chemical features extracted from paperboard and detected with LC-HRMS by at least 98% (from 1695-2693 to 14-50). The entire process was successful for spiked genotoxic chemicals, which were correctly prioritized in the fractionation and non-target analysis workflow. The native chemical with the strongest genotoxicity signal was identified with a suspect list as 5-chloro-2-methyl-4-isothiazolin-3-one and confirmed with LC-HRMS/MS and HPTLC bioassay. Toward identification of the remaining unknown genotoxicants, two-dimensional HPTLC further reduced the number of chemical features. Genotoxicity predictions with MLinvitroTox based on molecular fingerprints of the unknown signals derived from their MS2 fragmentation spectra helped prioritize two chemical features and suggested candidate structures. This work demonstrates strategies for using HPTLC, HRMS, and toxicity prediction to help identify toxicants in food packaging.

Tire and road wear particles (TRWP) contain complex mixtures of chemicals and release them to the environment, and potential toxic effects of these chemicals still need to be characterized. We used a standardized surrogate for TRWP, cryogenically milled tire tread (CMTT), to isolate and evaluate effects of tire‐associated chemicals. We examined organic chemical mixtures extracted and leached from CMTT for the toxicity endpoints genotoxicity, estrogenicity, and inhibition of bacterial luminescence. The bioassays were performed after chromatographic separation on high‐performance thin‐layer chromatography (HPTLC) plates. Extracts of CMTT were active in all three HPTLC bioassays with two estrogenic zones, two genotoxic zones, and two zones inhibiting bacterial luminescence. Extracts of CMTT artificially aged with thermooxidation were equally bioactive in each HPTLC bioassay. Two types of aqueous leachates of unaged CMTT, simulating either digestion by fish or contact with sediment and water, contained estrogenic chemicals and inhibitors of bacterial luminescence with similar profiles to those of CMTT extracts. Of 11 tested tire‐associated chemicals, two were estrogenic, three were genotoxic, and several inhibited bacterial luminescence. 1,3‐Diphenylguanidine, transformation products of N‐(1,3‐dimethylbutyl)‐N′‐phenyl‐p‐phenylenediamine, and benzothiazoles were especially implicated through comparison to HPTLC retention factors in the CMTT samples. Other bioactive bands in CMTT samples did not correspond to any target chemicals. Tire particles clearly contain and can leach complex mixtures of toxic chemicals to the environment. Although some known chemicals contribute to estrogenic, genotoxic, and antibacterial hazards, unidentified toxic chemicals are still present and deserve further investigation. Overall, our study expands the understanding of potential adverse effects from tire particles and helps improve the link between those effects and the responsible chemicals. Environ Toxicol Chem 2024;00:1–11. © 2024 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

High-performance thin-layer chromatography (HPTLC)-bioassays are promising new methods for detecting bioactive chemicals in food packaging. Here, we test whether direct-acting genotoxic chemicals are detectable in food contact materials (FCM) using HPTLC-bioassays. First, an interactive worksheet lays out steps to calculate needed detection limits in (bio)analytical methods from regulatory limits, including thresholds of toxicological concern (TTC). Second, we show that the sensitivity of a HPTLC-genotoxicity assay to low doses of chemicals, including food contact chemicals, is greater than a standardized microtiter plate version and in vitro assays already reported. Third, using HPTLC, we detected genotoxicity in extracts of FCM, and not in simulated migrates of FCM. Applying the worksheet to calculate needed detection limits in FCM migrates, we observed that seven of ten genotoxic chemicals would be detectable with HPTLC if present at the regulatory 10 ppb limit and two of ten at TTC for adults. With development, HPTLC-bioassays might become the best option for supporting safety assessment of genotoxicants in food packaging.

Tire and road wear particles (TRWP) account for an important part of the polymer particles released into the environment. There are scientific knowledge gaps as to the potential bioaccessibility of chemicals associated with TRWP to aquatic organisms. This study investigated the solubilization and bioaccessibility of seven of the most widely used tire-associated organic chemicals and four of their degradation products from cryogenically milled tire tread (CMTT) into fish digestive fluids using an in vitro digestion model based on Oncorhynchus mykiss. Our results showed that 0.06% to 44.1% of the selected compounds were rapidly solubilized into simulated gastric and intestinal fluids within a typical gut transit time for fish (3 h in gastric and 24 h in intestinal fluids). The environmentally realistic scenario of coingestion of CMTT and fish prey was explored using ground Gammarus pulex. Coingestion caused compound-specific changes in solubilization, either increasing or decreasing the compounds’ bioaccessibility in simulated gut fluids compared to CMTT alone. Our results emphasize that tire-associated compounds become accessible in a digestive milieu and should be studied further with respect to their bioaccumulation and toxicological effects upon passage of intestinal epithelial cells.

Tire and road wear particles (TRWP) have been shown to represent a large part of anthropogenic particles released into the environment. Nevertheless, the potential ecological risk of TRWP in the different environmental compartments and their potential toxic impacts on terrestrial and aquatic organisms remain largely underinvestigated. Several heavy metals compose TRWP, including Zn, which is used as a catalyst during the vulcanization process of rubber. This study investigated the solubilization potential of metals from cryogenically milled tire tread (CMTT) and TRWP in simulated gastric fluids (SFGASTRIC) and simulated intestinal fluids (SFINTESTINAL) designed to mimic rainbow trout (Oncorhynchus mykiss) gastrointestinal conditions. Our results indicate that the solubilization of heavy metals was greatly enhanced by gastrointestinal fluids compared to that by mineral water. After a 26 h in vitro digestion, 9.6 and 23.0% of total Zn content of CMTT and TRWP, respectively, were solubilized into the simulated gastrointestinal fluids. Coingestion of tire particles (performed with CMTT only) and surrogate prey items (Gammarus pulex) demonstrated that the animal organic matter reduced the amount of bioavailable Zn solubilized from CMTT. Contrastingly, in the coingestion scenario with vegetal organic matter (Lemna minor), high quantities of Zn were solubilized from L. minor and cumulated with Zn solubilized from CMTT.

Food contact materials (FCM) may contain complex mixtures of estrogenic chemicals. A yeast estrogen screen performed on high performance thin-layer chromatography plates (planar-YES, P-YES) is promising for analysis of such mixtures, as it could allow for better elucidation of effects compared with established methods in microtiter plates. However, the P-YES has not been directly compared with established methods. We compared the performance of a microtiter plate YES (lyticase-YES, L-YES) to P-YES on silica gel HPTLC plates using 17β-estradiol (E2), 20 chemicals representative of migrants from plastic FCM, and three migrates of coated metal food cans. Effective doses (ED10, ED50) and estradiol equivalencies were calculated for each chemical. Thirteen chemicals had calculable EDs in the L-YES or P-YES, with average EDs 13-fold (range 0.63–36) more potent in P-YES than in the L-YES. Normalized to E2, the median estrogenicity was within 1.5-fold (0.43–8.8) between the assays. Therefore, P-YES was as or more sensitive than L-YES but potencies relative to E2 were comparable between assays. With chromatography, the P-YES detected estrogenicity in coated metal cans, effects that were unmeasurable in L-YES. With the sample preparation methods used in this study, both YES assays are sufficiently sensitive to detect bisphenol A below the specific migration limit for plastic packaging (0.05 mg/kg food). This study demonstrates that P-YES outperforms L-YES because it is more sensitive, provides comparable estradiol equivalents, and circumvents confounding mixture effects. The P-YES will be useful for routine monitoring of FCM and toxicant identification in problematic materials.

To assess differences and trends in personal chemical exposure, volunteers from 14 communities in Africa (Senegal, South Africa), North America (United States (U.S.)) and South America (Peru) wore 262 silicone wristbands. We analysed wristband extracts for 1530 unique chemicals, resulting in 400 860 chemical data points. The number of chemical detections ranged from 4 to 43 per wristband, with 191 different chemicals detected, and 1339 chemicals were not detected in any wristband. No two wristbands had identical chemical detections. We detected 13 potential endocrine disrupting chemicals in over 50% of all wristbands and found 36 chemicals in common between chemicals detected in three geographical wristband groups (Africa, North America and South America). U.S. children (less than or equal to 11 years) had the highest percentage of flame retardant detections compared with all other participants. Wristbands worn in Texas post-Hurricane Harvey had the highest mean number of chemical detections (28) compared with other study locations (10-25). Consumer product-related chemicals and phthalates were a high percentage of chemical detections across all study locations (36-53% and 18-42%, respectively). Chemical exposures varied among individuals; however, many individuals were exposed to similar chemical mixtures. Our exploratory investigation uncovered personal chemical exposure trends that can help prioritize certain mixtures and chemical classes for future studies.

With hundreds of thousands of chemicals in the environment, effective monitoring requires high-throughput analytical techniques. This paper presents a quantitative screening method for 1550 chemicals based on statistical modeling of responses with identification and integration performed using deconvolution reporting software. The method was evaluated with representative environmental samples. We tested biological extracts, low-density polyethylene, and silicone passive sampling devices spiked with known concentrations of 196 representative chemicals. A multiple linear regression (R2 = 0.80) was developed with molecular weight, logP, polar surface area, and fractional ion abundance to predict chemical responses within a factor of 2.5. Linearity beyond the calibration had R2 > 0.97 for three orders of magnitude. Median limits of quantitation were estimated to be 201 pg/μL (1.9× standard deviation). The number of detected chemicals and the accuracy of quantitation were similar for environmental samples and standard solutions. To our knowledge, this is the most precise method for the largest number of semi-volatile organic chemicals lacking authentic standards. Accessible instrumentation and software make this method cost effective in quantifying a large, customizable list of chemicals. When paired with silicone wristband passive samplers, this quantitative screen will be very useful for epidemiology where binning of concentrations is common.

Exposure monitoring with personal silicone wristband samplers was demonstrated in Peru in four agriculture and urban communities where logistic and practical constraints hinder use of more traditional approaches. Wristbands and associated methods enabled quantitation of 63 pesticides and screening for 1397 chemicals including environmental contaminants and personal care products. Sixty-eight wristbands were worn for approximately one month by volunteers from four communities of Alto Mayo, Peru. We identified 106 chemicals from eight chemical classes among all wristbands. Agricultural communities were characterized by pesticides and PAHs, while the urban communities had more personal care products present. Multiple linear regressions explained up to 40% of variance in wristbands from chlorpyrifos, cypermethrin, and DDT and its metabolites (DDx) (r2=0.39, 0.30, 0.40, respectively). All three pesticides were significantly different between communities, and cypermethrin and DDx were associated with participant age. The calculated relative age of DDT suggested some communities had more recent exposure than others. This work aids health research in the Alto Mayo and beyond by identifying typical mixtures and potential sources of exposure to organic chemicals in the personal environment. Silicone wristband sampling with chemical screening is a candidate for widespread use in exposure monitoring in remote areas.

Using effects‐directed analysis, we investigated associations previously observed between polycyclic aromatic hydrocarbons (PAHs) and embryotoxicity in field‐deployed low‐density polyethylene (LDPE). We conducted effects‐directed analysis using a zebrafish embryo assay and iterative fractionation of extracts of LDPE that were deployed in the Portland Harbor superfund megasite, Oregon (USA). Whole extracts induced toxicity including mortality, edema, and notochord distortion at 20% effect concentration (EC20) values of approximately 100, 100, and 10 mg LDPE/mL, respectively. Through fractionation, we determined that PAHs at concentrations similar to previous research did not contribute markedly to toxicity. We also eliminated pesticides, phthalates, musks, and other substances identified in toxic fractions by testing surrogate mixtures. We identified free fatty acids as lethal components of LDPE extracts and confirmed their toxicity with authentic standards. We found chromatographic evidence that dithiocarbamates are responsible for notochord and other sublethal effects, although exact matches were not obtained. Fatty acids and dithiocarbamates were previously unrecorded components of LDPE extracts and likely contribute to the toxicity of the whole mixture. The present study demonstrates the success of effects‐directed analysis in nontargeted hazard identification using the zebrafish embryo test as a self‐contained battery of bioassays that allows identification of multiple chemicals with different modes of action. This is the first effects‐directed analysis to combine LDPE and zebrafish, approaches that are widely applicable to identifying developmental hazards in the bioavailable fraction of hydrophobic organic compounds. Environ Toxicol Chem 2017;36:2290–2298. © 2017 SETAC

Contamination of resident aquatic organisms is a major concern for environmental risk assessors. However, collecting organisms to estimate risk is often prohibitively time and resource-intensive. Passive sampling accurately estimates resident organism contamination, and it saves time and resources. This study used low density polyethylene (LDPE) passive water samplers to predict polycyclic aromatic hydrocarbon (PAH) levels in signal crayfish, Pacifastacus leniusculus. Resident crayfish were collected at 5 sites within and outside of the Portland Harbor Superfund Megasite (PHSM) in the Willamette River in Portland, Oregon. LDPE deployment was spatially and temporally paired with crayfish collection. Crayfish visceral and tail tissue, as well as water-deployed LDPE, were extracted and analyzed for 62 PAHs using GC-MS/MS. Freely-dissolved concentrations (Cfree) of PAHs in water were calculated from concentrations in LDPE. Carcinogenic risks were estimated for all crayfish tissues, using benzo[a]pyrene equivalent concentrations (BaPeq). ∑PAH were 5-20 times higher in viscera than in tails, and ∑BaPeq were 6-70 times higher in viscera than in tails. Eating only tail tissue of crayfish would therefore significantly reduce carcinogenic risk compared to also eating viscera. Additionally, PAH levels in crayfish were compared to levels in crayfish collected 10 years earlier. PAH levels in crayfish were higher upriver of the PHSM and unchanged within the PHSM after the 10-year period. Finally, a linear regression model predicted levels of 34 PAHs in crayfish viscera with an associated R-squared value of 0.52 (and a correlation coefficient of 0.72), using only the Cfree PAHs in water. On average, the model predicted PAH concentrations in crayfish tissue within a factor of 2.4 ± 1.8 of measured concentrations. This affirms that passive water sampling accurately estimates PAH contamination in crayfish. Furthermore, the strong predictive ability of this simple model suggests that it could be easily adapted to predict contamination in other shellfish of concern.