Using x-ray photoelectron spectroscopy of the oxygen 1s core level, the ratio between intact (D_{2}O) and dissociated (OD) water in the hydrated stoichiometric TiO_{2}(110) surface is determined at varying coverage and temperature. In the submonolayer regime, both the D_{2}O∶OD ratio and the core-level binding energy of D_{2}O (ΔBE) decrease with temperature. The observed variations in ΔBE are shown with density functional theory to be governed crucially and solely by the local hydrogen bonding environment, revealing a generally applicable classification and details about adsorption motifs.

To map morphological changes of circulating monocytes between CSF1R-related leukoencephalopathy and healthy donors using nano x-ray tomography and electron microscope, with a specific focus on the numbers and volumes of secondary lysosomes.

On-surface synthesis has emerged in the last decade as a method to create graphene nanoribbons (GNRs) with atomic precision. The underlying premise of this bottom-up strategy is that precursor molecules undergo a well-defined sequence of inter- and intramolecular reactions, leading to the formation of a single product. As such, the structure of the GNR is encoded in the precursors. However, recent examples have shown that not only the molecule, but also the coinage metal surface on which the reaction takes place, plays a decisive role in dictating the nanoribbon structure. In this work, we use scanning probe microscopy and X-ray photoelectron spectroscopy to investigate the behavior of 10,10'-dichloro-9,9'-bianthryl (DCBA) on Ag(111). Our study shows that Ag(111) can induce the formation of both seven-atom wide armchair GNRs (7-acGNRs) and 3,1-chiral GNRs (3,1-cGNRs), demonstrating that a single molecule on a single surface can react to different nanoribbon products. We additionally show that coadsorbed dibromoperylene can promote surface-assisted dehydrogenative coupling in DCBA, leading to the exclusive formation of 3,1-cGNRs.

The accuracy of the theoretical description of materials properties in the framework of density functional theory (DFT) inherently depends on the exchange‐correlation (XC) functional used in the calculations. Here we investigate the influence of the choice of a XC functional (PBE, RPBE, PW91, and PBE0) on the kinetics of the adsorption, diffusion and dissociation of water on the rutile TiO2(110) surface using a combined Kinetic Monte Carlo (KMC) – DFT approach, where the KMC simulations are based on the barriers for the aforementioned processes calculated with DFT. We also test how the adsorption energy of intact and dissociated water molecules changes when dispersion interactions are included into the calculations. We consider the beginning of the water layer formation varying coverage up to 0.2 monolayer (ML) at temperatures up to 180 K. We demonstrate that the dynamics of the simulated water–titania system is extremely sensitive to the choice of the XC functional.

In this progress report we describe several design improvements that have been implemented at the HELIOS laboratory, as well as presenting the output characteristics that have been measured as a result. The main focus will be on the redesign of the gas cell, which has enhanced the photon flux of the XUV probe beam. Also, a frequency Crippler utilizing sum frequency generation has been installed at the end of the pump line, which increases the photon flux available for both 3.1 eV (400 nm) and 4.66 eV (266 nm) applications without significant increment in the pulse width of the pump. (C) 2017 Elsevier B.V. All rights reserved.

Preparing an anatase TiO2(101) surface with a high density of oxygen vacancies and associated reduced Ti species in the near-surface region results in drastic changes in the water adsorption chemistry compared to adsorption on a highly stoichiometric surface. Using synchrotron radiation excited photoelectron spectroscopy, we observe a change in the water growth mode, from layer-by-layer growth on the highly stoichiometric surface to bilayer growth on the reduced surface. Furthermore, we have been able to observe Ti3+ enrichment at the surface upon water adsorption. The Ti3+ enrichment occurs concomitant with effective water dissociation into hydroxyls with a very high thermal stability. The water bilayer on the reduced surface is thermally more stable than that on the stoichiometric surface, and it is more efficient in promoting further water dissociation upon heating. The results thus show how the presence of subsurface defects can alter the wetting mechanism of an oxide surface.

The anatase TiO2(101) surface and its interaction with water is an important topic in oxide surface chemistry. Firstly, it benchmarks the properties of the majority facet of TiO2 nanoparticles and, secondly, there is a controversy as to whether the water molecule adsorbs intact or deprotonates. We have addressed the adsorption of water on anatase TiO2(101) by synchrotron radiation photoelectron spectroscopy. Three two-dimensional water structures are found during growth at different temperatures: at 100 K, a metastable structure forms with no hydrogen bonding between the water molecules. In accord with prior literature, we assign this phase to chains of disordered molecules. Growth 160 K results in a metastable structure with expressed hydrogen bonding between the water molecules. At 190 K, the water molecules become disordered as the thermal energy is too high and hence the hydrogen bonds break. The result is a structure with isolated monomers. Partial dissociation is observed for all three growths, with the molecular state only slightly favored in energy (20-40 meV) over the dissociated state. Heating of a thick film leads to more dissociation compared to a bilayer, when formed at 100 K. Thus, extending the water network facilitates proton transport and hence dissociation. The results reconcile apparent conflicting experimental results previously obtained by scanning tunneling microscopy (STM) and core level photoelectron spectroscopy.

In article no. 1700344, Nilsson et al. investigate the influence of the choice of the exchange-correlation functional on the kinetics of the adsorption, diffusion and dissociation of water on the rutile TiO2(110) surface using a combined Kinetic Monte Carlo (KMC) – density functional theory (DFT) approach, where the KMC simulations are based on the barriers for the aforementioned processes calculated with DFT. The beginning of the water layer formation, varying coverage up to 0.2 monolayer at rather low temperatures (up to 180 K), has been modelled. The results show that different functionals give different weights to the studied kinetic processes and, therefore, the overall description of the dynamics of the simulated water–titania system is extremely sensitive to the choice of the exchange-correlation functional.

We present a synchrotron radiation photoelectron spectroscopy study of the adsorption and photooxidation of trimethyl acetate (TMA) on TiO2(B)(001). The TiO2(B)(001) substrate was realized in the form of 2nm thick film on Au(111). The TMA species adopt the bidentate bonding configuration, as expected for carboxylic acids on TiO2, but cannot coordinate to all surface Ti ions due to steric hindrance. The proposed arrangement of the TMA species thus allows for the formation of an overlayer with a (2 x 1) periodicity. The thermal stability is found to be comparable to that on rutile (110) although the results indicate differences in the threshold for the TMA+H -> TMAA reaction. Photolysis using both ultraviolet (UV) light and soft x-ray synchrotron radiation (SR) was studied and compared to the reaction on the reduced ruffle (110) surface. A kinetic analysis suggests that the photoreaction rate for TMA on the TiO2(B) thin film is initially two times faster than that on the reduced rutile TiO2(110) surface. The higher activity of the TiO2(B) film is assigned to a reduced influence from surplus electrons associated with reduced Ti species, thereby decreasing the probability for hole-annihilation at high TMA coverage. (C) 2017 Elsevier B.V. All rights reserved.

Thin films of TiOx on Pd(100) and Pd(111) have been investigated with respect to their properties after oxidation and reduction cycles. High-resolution photoemission spectroscopy (HRPES) and low energy electron diffraction (LEED) have been applied to characterize the thin film oxidation states and structure before and after oxidation and reduction under ultrahigh vacuum conditions. Fully oxidized TiO2 films were formed on both surfaces. These structures display Moiré patterns in LEED, in one dimension for Pd(100) and in two dimensions for Pd(111), and they have previously not been reported for TiO2/Pd. The oxidation process causes strong reduction in the interaction between the oxide thin film and the Pd substrate, most significantly for Pd(111). Reversible oxidation/reduction cycling of TiOx thin films on Pd(111) and Pd(100) was possible.

Means to measure the temporal evolution following a photo-excitation in conjugated polymers are a key for the understanding and optimization of their function in applications such as organic solar cells. In this paper we study the electronic structure dynamics by direct pump-probe measurements of the excited electrons in such materials. Specifically, we carried out a time-resolved photoelectron spectroscopy (TRPES) study of the polymer PCPDTBT by combining an extreme ultraviolet (XUV) high harmonic generation source with a time-of-flight spectrometer. After excitation to either the 1st excited state or to a higher excited state, we follow how the electronic structure develops and relaxes on the electron binding energy scale. Specifically, we follow a less than 50 fs relaxation of the higher exited state and a 10 times slower relaxation of the 1st excited state. We corroborate the results using DFT calculations. Our study demonstrates the power of TRPES for studying photo-excited electron energetics and dynamics of solar cell materials.

The growth of ultrathin TiOx (0≤x≤2) films on Pd(100) and Pd(111) surfaces by chemical vapor deposition (CVD), using Titanium(IV)isopropoxide (TTIP) as precursor, has been investigated by high resolution photoelectron spectroscopy, low energy electron diffraction and scanning tunneling microscopy. Three different TiOx phases and one Pd–Ti alloy phase have been identified for both surfaces. The Pd–Ti alloy phase is observed at the initial stages of film growth. Density functional theory (DFT) calculations for Pd(100) and Pd(111) suggest that Ti is alloyed into the second layer of the substrate. Increasing the TTIP dose yields a wetting layer comprising Ti2+ species (TiOx, x ∼0.75). On Pd(100), this phase exhibits a mixture of structures with (3×5) and (4×5) periodicity with respect to the Pd(100) substrate, while an incommensurate structure is formed on Pd(111). Most importantly, on both surfaces this phase consists of a zigzag pattern similar to observations on other reactive metal surfaces. Further increase in coverage results in growth of a fully oxidized (TiO2) phase on top of the partially oxidized layer. Preliminary investigations indicate that the fully oxidized phase on both Pd(100) and Pd(111) may be the TiO2(B) phase.

We present a dedicated synchrotron radiation photoelectron spectroscopy (SR-PES) study of a photochemical reaction on the surface of rutile TiO2(110). The photoreaction kinetics of carboxylate species (trimethyl acetate, TMA) upon irradiation by UV and soft X-rays were monitored, and we show that it is possible to control the reaction rates from UV light and soft X-rays independently. We directly observe Ti4+ → Ti3+ conversion upon irradiation, attributed to electron trapping at Ti sites close to surface OH groups formed by deprotonation of the parent molecule, trimethylacetic acid (TMAA). TMA photolysis on two surface preparations with different oxygen vacancy densities shows that the vacancy-related charge quenches the amount of charge that can be trapped at hydroxyls upon irradiation. During the initial stages of reaction the correlation between the amount of photodepleted TMA and the amount of charge trapped in the Ti 3d band gap state is nearly 1:1. A first-order kinetics analysis reveals that the reaction rate decreases with decreasing TMA coverage. There is also a coverage-dependent difference in the electronic structure of TMA moieties, primarily involving the carboxyl anchor group. These changes are consistent with a decreased hole affinity of the adsorbed TMA and hence a decreased reaction rate. This discovery adds to the previously presented picture of a reactivity that is inversely proportional to the number of surface hydroxyls, suggesting that the balance between the amounts of TMA, OH, and trapped charge needs to be considered.

The purpose of this study was to establish an experimental setting and an anesthetic method compatible with future sequential studies using (18)F-FDG-PET single scans, i.e. autoradiographic measurements, for the estimation of metabolic rate of glucose (MRglc) in mice. In this study we had no access to a small animal PET scanner and therefore focus was on the anesthetic setting and optimization of the input function as a preparation for the future tumor metabolic studies. Initially, four combinations of intraperitoneal (ip) anesthesia were tested on tumor bearing mice. Fentanyl-fluanisone plus diazepam yielded low and stable blood glucose levels and kept the animals sedated for approximately 2 h. The anesthesia was also tested in a longitudinal (18)F-FDG study, where tumor bearing mice were anesthetized, injected with (18)F-FDG, and sampled for blood, before, one day after, and 8 days after treatment with cisplatin. The animals were in good condition during the entire study period. To validate the method, average MRglc of whole brain and cerebellum in mice were calculated and compared with the literature. The average MRglc in the whole brain and cerebellum were 46.2±4.4 and 39.0±3.1 µmol 100g(-1) min(-1). In the present study, we have shown that an ip anesthesia with a combination of fentanyl-fluanisone and diazepam is feasible and provides stable and low blood glucose levels after a fasting period of 4 h in experiments in nude mice with xenografted human tumors. We have also verified that (18)F-FDG, intraperitoneally administrated, results in an expected plasma activity uptake and clearance. The method doesn't alter the uptake in brain which is an indirect indication that the anesthesia doesn't alter the uptake in other organs. In combination with meticulous animal handling this set-up is reliable and future sequential tumor studies of early metabolic effects with calculation of MRglc following cytotoxic therapy are made possible.

Physics, Chemistry and Applications of Nanostructures, pp. 3-11 (2015) No AccessKINETICS OF WATER ADSORPTION ON TiO2(110)M. LEETMAA, B. WANG, D. RAGAZZON, L. E. WALLE, A. BORG, P. UVDAL, A. SANDELL, and N. V. SKORODUMOVAM. LEETMAADept. of Physics and Astronomy, Uppsala University P. O. Box 516, SE-751 20 Uppsala, Sweden, B. WANGDept. of Physics and Astronomy, Uppsala University P. O. Box 516, SE-751 20 Uppsala, Sweden, D. RAGAZZONDept. of Physics and Astronomy, Uppsala University P. O. Box 516, SE-751 20 Uppsala, Sweden, L. E. WALLEDept. of Physics, Norwegian University of Science and Technology (NTNU) NO-7491 Trondheim, Norway, A. BORGDept. of Physics, Norwegian University of Science and Technology (NTNU) NO-7491 Trondheim, Norway, P. UVDALChemical Physics, Dept. of Chemistry, P.O. Box 124, and MAX-IV Laboratory P.O. Box 118, Lund University, SE-221 00 Lund, Sweden, A. SANDELLDept. of Physics and Astronomy, Uppsala University P. O. Box 516, SE-751 20 Uppsala, Sweden, and N. V. SKORODUMOVAMultiscale Materials Modelling group, Department of Materials and Engineering Royal Institute of Technology (KTH), SE-10044 Stockholm, SwedenDept. of Physics and Astronomy, Uppsala University P. O. Box 516, SE-751 20 Uppsala, Swedenhttps://doi.org/10.1142/9789814696524_0001Cited by:1 PreviousNext AboutSectionsPDF/EPUB ToolsAdd to favoritesDownload CitationsTrack CitationsRecommend to Library ShareShare onFacebookTwitterLinked InRedditEmail Abstract: We have built a kinetic model of the first water monolayer growth on TiO2(110) using the kinetic Monte Carlo (KMC) method based on the parameters describing water molecule diffusion and dissociation obtained in first principle calculations. The adsorption process has also been studied with X-ray photoelectron spectroscopy (XPS). The experiment shows that the ratio between intact and dissociated molecules monitored during the growth crucially depends on temperature with more molecules staying intact at lower temperatures. Most profound composition differences are observed at low coverage (up to 0.2-0.25 ML). Our simulations reproduce the experimental trends and rationalize these observations. FiguresReferencesRelatedDetailsCited By 1Modeling Kinetics of Water Adsorption on the Rutile TiO 2 (110) Surface: Influence of Exchange-Correlation FunctionalJohan O. Nilsson, Mikael Leetmaa, Baochang Wang, Pjotrs A. Žguns and Igor Pašti et al.8 November 2017 | physica status solidi (b), Vol. 255, No. 3 Physics, Chemistry and Applications of NanostructuresMetrics History PDF download

High resolution photoelectron spectroscopy has been used to investigate water adsorption on four different TiOx ultrathin film structures, grown on Au(111) by chemical vapor deposition. Two of the structures are reduced TiOx single layer phases, forming a honeycomb (HC) and a pinwheel (PW) structure, respectively. The other two phases have TiO2 stoichiometry, one in the form of islands and one in the form of a TiO2(B)(001) extended layer. Partial water dissociation is observed for all phases but the HC phase, and the dissociation propensity and adsorbate thermal stability structure result from interplay between the atomic structure of the particular TiOx phase and defects formed in the preparation. The dissociation on the TiO2(B) film is mainly related to different types of defect sites. The TiO2 islands, interpreted as surface reconstructed rutile TiO2(100), generate the highest amount of hydroxyls with a behavior consistent with reconstruction into a mixed (100) and (110) termination. Water dissociation on the PW layer can be assigned to particular sites of the structure and it stands out by leading to oxidation of Ti species.

This study presents how a TiO2(B) film exposing the (001) face can be grown on Au(111) by chemical vapor deposition. Identification and characterization of the TiO2(B)(001) layer are carried out with low-energy electron diffraction (LEED), synchrotron radiation photoelectron spectroscopy (PES), scanning tunneling microscopy (STM) and X-ray absorption spectroscopy (XAS). Formation of the TiO2(B) film requires a two-step preparation procedure: deposition at 280°C followed by annealing to 500°C. This suggests that the interaction between a substrate and an overlayer stabilizes the TiO2(B) film, preventing the formation of thermodynamically more stable rutile islands. The study thus gives insight into how the morphology and the atomic structure of the titania overlayer can be controlled.

This thesis presents surface science studies, investigating several aspects of titanium dioxide at the atomic scale. The greater part of this work is devoted to the preparation by chemical vapor deposition (CVD) of titanium(IV) tetraisopropoxide (TTIP) of ultrathin TiO2 or TiOx films on Au(111). Four ordered structures were growth and characterized. It was also demonstrated how the morphology of the film (wetting film vs island) can be tailored. The acquired knowledge about the CVD process was exploited to load nano porous gold with titania, enhancing its catalytic activity. The reactivity towards water adsorption of the titania structures on Au(111) was also investigated. Finally, part of this work concerned the studying of the behavior of water on the stoichiometric rutile TiO2(110) surface, combining the experiments with density-functional theory (DFT) calculations and (kinetic) Monte Carlo simulations. The main experimental techniques used in this work are low-energy electron diffraction (LEED), scanning tunneling microscopy (STM) and photoelectron spectroscopy (PES).

composition of the first water layer on the stoichiometric rutile TiO2 (1 1 0) surface was studied with the use of synchrotron radiation photoelectron spectroscopy. The same H2O-OH balance was reached using different preparation procedures and there was no difference between H2O and D2O. On this basis, we rule out the possibility that the partially dissociated layer is an artifact caused by photon irradiation during measurements. Pre-deposition of Au at room temperature, primarily decorating step edges [e.g. S. A. Tenney et al. J. Phys. Chem. C 115 (2011) 11112] decreases the water uptake but does not relative amount that dissociates. This implies that the observed H2O-OH (b)alance is not controlled by dissociation at steps and subsequent out-diffusion of hydrogens on the terraces. That is, the formation of a partially dissociated water layer is an inherent property of stoichiometric terraces. (C) 2014 Elsevier B. V. All rights reserved.

Dental implant abutments that emerge through the mucosa are rapidly covered with a salivary protein pellicle to which bacteria bind, initiating biofilm formation. In this study, adherence of early colonizing streptococci, Streptococcus gordonii, Streptococcus oralis, Streptococcus mitis and Streptococcus sanguinis to two saliva-coated anodically oxidized surfaces was compared with that on commercially pure titanium (CpTi). Near edge X-ray absorption (NEXAFS) showed crystalline anatase was more pronounced on the anodically oxidized surfaces than on the CpTi. As revealed by fluorescence microscopy, a four-species mixture, as well as individual bacterial species, exhibited lower adherence after 2 h to the saliva-coated, anatase-rich surfaces than to CpTi. Since wettability did not differ between the saliva-coated surfaces, differences in the concentration and/or configuration of salivary proteins on the anatase-rich surfaces may explain the reduced bacterial binding effect. Anatase-rich surfaces could thus contribute to reduced overall biofilm formation on dental implant abutments through diminished adherence of early colonizers.