In recent years, packed-bed systems for large-scale applications have emerged as a highly promising design for Thermal Energy Storage systems because of their high thermal efficiency and economic feasibility. Large-scale application systems typically include packed-bed thermal energy stores as essential components, enabling effective integration with renewable energy and processed heat. The packed-bed systems investigated in this paper utilise Magnesia as the storage medium and optimised parameters, which have previously been identified through research involving charging and discharging cycles of both the hot and cold storage systems when air is the heat transfer fluid. This includes solid particle diameters of 0.004 m, a material porosity of 0.2, an aspect ratio of 1 for the storage tank, and a mass flow rate of 13.7 kg/m3. This paper aims to present a comparative analysis of the influence of alternative heat transfer gases, namely air, argon, carbon dioxide, helium, hydrogen, and nitrogen, on the performance of Pumped Thermal Energy Storage hot and cold storage systems. The performance of the six gases in the storage system was evaluated using an axisymmetric model simulated with COMSOL Multiphysics 5.6 software, with the total energy stored and the capacity factor serving as key performance indicators. The results revealed that carbon dioxide gas was the most promising heat transfer fluid and that the packed bed could be operated efficiently over 72% and 76% of its range for hot and cold systems, respectively. Hydrogen, nitrogen, and air performed similarly but less adequately than carbon dioxide and had operating ranges of 55% and 75% for hot and cold storage. Helium and argon had the poorest performance, with optimal charging and discharging rates corresponding to 50% and 66%.

The use of thermal energy storage (TES) contributes to the ongoing process of integrating various types of energy resources in order to achieve cleaner, more flexible, and more sustainable energy use. Numerical modelling of hot storage packed bed storage systems has been conducted in this paper in order to investigate the optimum design of the hot storage system. In this paper, the effect of varying design parameters, including the diameter of the packed bed, the storage material, the void fraction, and the aspect ratio of the packed bed, on storage performance was investigated. COMSOL Multiphysics 5.6 software has been used to design, simulate, and validate an axisymmetric model, which was then applied to evaluate the performance of the storage system based on the total energy stored, the heat transfer efficiency, and the capacity factor. In this paper, a novel-packed bed was proposed based on the parametric analysis. This involved a 0.2 void fraction, 4 mm porous media particle diameter, and Magnesia as the optimum storage material with air as the heat transfer fluid.

In recent years, there has been an increase in the use of renewable energy resources, which has led to the need for large-scale Energy Storage units in the electric grid. Currently, Compressed Air Energy Storage (CAES) and Pumped Hydro Storage (PHES) are the main commercially available large-scale energy storage technologies. However, these technologies are restricted geographically and can require fossil fuel streams to heat the air. Thus, there is a need to develop novel large-scale energy storage technologies that do not suffer from the abovementioned drawbacks. Among the in-development, large-scale Energy Storage Technologies, Pumped Thermal Electricity Storage (PTES), or Pumped Heat Energy Storage, stands out as the most promising due to its long cycle life, lack of geographical limitations, the absence of fossil fuel streams, and the possibility of integrating it with conventional fossil-fuel power plants. There have been a number of PTES systems proposed using different thermodynamic cycles, including the Brayton cycle, the Rankine cycle, and the transcritical Rankine cycle. The purpose of this paper is to provide a comprehensive overview of PTES concepts, as well as the common thermodynamic cycles they implement, indicating their individual strengths and weaknesses. Furthermore, the paper provides a comprehensive reference for planning and integrating various types of PTES into energy systems.

In recent years, liquid air energy storage (LAES) has gained prominence as an alternative to existing large-scale electrical energy storage solutions such as compressed air (CAES) and pumped hydro energy storage (PHES), especially in the context of medium-to-long-term storage. LAES offers a high volumetric energy density, surpassing the geographical constraints that hinder current mature energy storage technologies. The basic principle of LAES involves liquefying and storing air to be utilized later for electricity generation. Although the liquefaction of air has been studied for many years, the concept of using LAES “cryogenics” as an energy storage method was initially proposed in 1977 and has recently gained renewed attention. With the growing need for alternative energy storage methods, researchers have increasingly explored the potential of cryogenic media, leading to the development of the first LAES pilot plant and a growing body of research on LAES systems. However, one notable drawback of LAES is its relatively low round-trip efficiency, estimated to be around 50–60% for large-scale systems. However, due to its thermo-mechanical nature, LAES offers versatility and can be easily integrated with other thermal energy systems or energy sources across a wide range of applications. Most of the existing literature on LAES focuses on thermodynamic and economic analyses, examining various LAES configurations, and there is a clear lack of experimental studies in this field. This paper aims to conduct a comprehensive review of LAES technology, with a focus on the performance enhancement of these systems. Future perspectives indicate that hybrid LAES solutions, incorporating efficient waste energy recovery sections, hold the most promise for enhancing the tech-no-economic performance of standalone LAES systems.

As renewable energy production is intermittent, its application creates uncertainty in the level of supply. As a result, integrating an energy storage system (ESS) into renewable energy systems could be an effective strategy to provide energy systems with economic, technical, and environmental benefits. Compressed Air Energy Storage (CAES) has been realized in a variety of ways over the past decades. As a mechanical energy storage system, CAES has demonstrated its clear potential amongst all energy storage systems in terms of clean storage medium, high lifetime scalability, low self-discharge, long discharge times, relatively low capital costs, and high durability. However, its main drawbacks are its long response time, low depth of discharge, and low roundtrip efficiency (RTE). This paper provides a comprehensive review of CAES concepts and compressed air storage (CAS) options, indicating their individual strengths and weaknesses. In addition, the paper provides a comprehensive reference for planning and integrating different types of CAES into energy systems. Finally, the limitations and future perspectives of CAES are discussed.