ABSTRACT The Laboratoire de Mesure du Carbone 14 (LMC14) has operated a radiocarbon dating laboratory for almost twenty years with ARTEMIS, the Accelerator Mass Spectrometer (AMS) based on a NEC 9SDH-2 Pelletron tandem accelerator. A first status report describing the chemical pretreatment methods was published in 2017 (Dumoulin et al. 2017). This article summarizes updates of the routine procedures and presents new protocols. The quality checks in place at the LMC14 and results obtained for the GIRI international inter-comparison are reported. New protocols developed by the laboratory over the last five years are described with the preparation of iron, lead white, cellulose, calcium oxalate, and mortar. This report also provides a summary of practical information for sample preparation and can help the laboratory users who provide samples and publish results to better understand all the work behind a 14 C dating.

ABSTRACT In 2001, five French public organizations (CNRS, CEA, IRD, IRSN, and the Ministère de la Culture) signed an agreement to purchase a new accelerator mass spectrometer to provide radiocarbon dating services at the national level. The Laboratoire de Mesure du Carbone 14 (LMC14) was set up in Saclay (France) around ARTEMIS, an AMS system based on a 3MV Pelletron from NEC and installed in early 2003. In 2015, the LMC14 joined the Laboratoire des Sciences du Climat et de l’Environnement, making it possible to develop research projects in addition to the service activity and since 2021, the LMC14 has been a member of the IAEA Collaborating Centre “Atoms for Heritage” at the Université Paris-Saclay. Since 2003, 70,000 samples have been measured. Two-thirds of the samples have been prepared on site and one-third in two associated laboratories in Paris and Lyon. Over the past years, the LMC14 has participated in several international inter-comparisons and has continuously improved its capabilities by developing new protocols for preparation and measurement. In this paper, the radiocarbon dating services of the last 20 years for research institutions, museums and environmental monitoring are reviewed and recent results from environmental and archaeological research programs are highlighted.

ABSTRACTEstuaries and deltas are crucial zones to better understand the interactions between continents and oceans, and to characterize the mineralization and burial of different sources of organic matter (OM) and their effect on the carbon cycle. In the present study, we focus on the continental shelf of the northwest Mediterranean Sea near the Rhône river delta. Sediment cores were collected and pore waters were sampled at different depths at one station (Station E) located on this shelf. For each layer, measurements of dissolved inorganic carbon concentration (DIC) and its isotopic composition (δ13C and Δ14C) were conducted and a mixing model was applied to target the original signature of the mineralized OM. The calculated δ13C signature of the mineralized organic matter is in accordance with previous results with a δ13COM of marine origin that is not significantly impacted by the terrestrial particulate inputs from the river. The evolution with depth of Δ14C shows two different trends indicating two different Δ14C signatures for the mineralised OM. In the first 15 cm, the mineralized OM is modern with a Δ14COM = 100 ± 17‰ and corresponds to the OM produced during the nuclear period of the last 50 years. Deeper in the sediment, the result is very different with a depleted value Δ14COM = –172 ± 60‰ which corresponds to the pre-nuclear period. In these two cases, the marine substrate was under the influence of the local marine reservoir effect with more extreme Δ14C results. These differences can be largely explained by the influence of the river plume on the local marine DIC during these two periods.

AbstractThe main objective of this report is to present the dating process routinely applied to different types of samples at the Laboratoire de Mesure du Carbone 14 (LMC14). All the results and protocols refer to our procedures over the last 5 years. A description of the sorting and chemical pretreatments of the samples as well as the extraction and graphitization of CO2 are reported. Our last study concerning the degradation of the blank level according to the storage time of the targets between graphitization and accelerator mass spectrometry (AMS) measurement is also presented. This article also provides information on how to submit a valid laboratory sample. We give details relating to sampling procedures on site as well as contamination issues relative to the 14C dating methodology.

The Artemis accelerator mass spectrometry (AMS) facility is dedicated to high-precision radiocarbon measurements. It routinely measures over 4500 samples a year for French laboratories. This paper is a status report, showing the measurements of standard, blank, and FIRI intercomparison samples. Since 2008, research and development programs have been established by the Artemis team. During the collaborations with other research laboratories, intercomparisons on archaeological samples were performed and are listed here to show the quality of the Artemis measurements. Three areas of specific research and development are investigated: technical development, beam optic simulations, and specific archaeological studies. The technical developments of the facility are based on the setup of a new bench for water sample preparation and routine microsample preparation and measurement. Beam optic simulations are carried out to control the quality of the measurement related to the tuning of the facility. International collaborations are always in progress. In 2012, the programs include improving the accuracy of reigns for the dynastic Egypt period and the 14 C dating of ancient iron.

The Artemis accelerator mass spectrometry (AMS) facility is dedicated to high-precision radiocarbon measurements. It routinely measures over 4500 samples a year for French laboratories. This paper is a status report, showing the measurements of standard, blank, and FIRI intercomparison samples. Since 2008, research and development programs have been established by the Artemis team. During the collaborations with other research laboratories, intercomparisons on archaeological samples were performed and are listed here to show the quality of the Artemis measurements. Three areas of specific research and development are investigated: technical development, beam optic simulations, and specific archaeological studies. The technical developments of the facility are based on the setup of a new bench for water sample preparation and routine microsample preparation and measurement. Beam optic simulations are carried out to control the quality of the measurement related to the tuning of the facility. International collaborations are always in progress. In 2012, the programs include improving the accuracy of reigns for the dynastic Egypt period and the 14C dating of ancient iron.

The Artemis accelerator mass spectrometry (AMS) facility, installed in 2003 in Saclay, France, is devoted to radiocarbon measurements. Samples are submitted by scientists in the fields of Quaternary geology, environmental sciences, and archaeology. The entire preparation process, originally optimized for samples with about 1 mg of carbon, has been tested in recent years for samples with a lower carbon content. In particular, we prepared and measured carbonate and organic background and reference samples ranging in mass from 0.01 to 1 mg C. These tests helped define our protocol's practical limits and determine necessary improvements. Furthermore, our experiments demonstrated that satisfactory graphitization yields (80% and higher) and low background values can be obtained with samples down to 0.2 mg of carbon. For handling smaller samples, we developed a specific process. We tested smaller reactors (5 mL in volume) and adapted the reduction parameters (H 2 pressure and temperature) accordingly. We also tested the effect of a chemical water trap on graphitization yields and 14 C results. This paper presents in detail the aforementioned developments and reports the 14 C results obtained for background and standard small samples prepared with the modified reactors.

We present here the new line installed at the LMC14 laboratory (Saclay, France) for dissolved inorganic carbon (DIC) extraction from marine and freshwater samples. The operating system and extraction process are described. The efficiency of the line design was checked, and the background (0.42 ± 0.11 pMC) and the reproducibility on artificial samples obtained by dissolution of IAEA-C1, IAEA-C2, and commercial bicarbonate in water were evaluated. An intercomparison with an independent lab (IDES) was also carried out on a natural sample. The line processes 3 samples a day under a helium flow and is able to run samples up to 40,000 ka.