3-deoxy-D-arabino-heptulosonate-7-phosphate synthase (DAH7PS) catalyzes the condensation reaction between phosphoenolpyruvate (PEP) and the four-carbon monosaccharide D-erythrose 4-phosphate (E4P). DAH7PS from the hyperthermophile Pyrococcus furiosus is a member of the DAH7PS Ibeta subfamily, which also includes the KDO8PS enzymes. KDO8PS (3-deoxy-D-manno-octulosonate-8-phosphate synthase) catalyzes a closely related reaction of PEP with the five-carbon monosaccharide D-arabinose 5-phosphate (A5P). DAH7PS from P. furiosus requires a metal ion for activity and, unlike other characterized DAH7PS enzymes, is not inhibited by aromatic amino acids. Purified P. furiosus DAH7PS is able to utilize not only the four-carbon phosphorylated monosaccharides E4P and 2-deoxy-D-erythrose 4-phosphate but also the five-carbon phosphorylated monosaccharides A5P, D-ribose 5-phosphate, and 2-deoxy-D-ribose 5-phosphate with similar kcat but much increased KM values. DL-glyceraldehyde 3-phosphate and D-glucose 6-phosphate are not substrates. The structure of recombinant P. furiosus DAH7PS in complex with PEP was determined to 2.25 A resolution. The asymmetric unit consists of a dimer of (beta/alpha)8-barrel subunits. Analysis of the buried surfaces formed by dimerization and tetramerization, as observed in the crystal structure, provides insight into both the oligomeric status in solution and the substrate ambiguity of P. furiosus DAH7PS. P. furiosus DAH7PS is both the first archaeal and the first "naked" DAH7PS (without N-terminal extensions) to be fully characterized functionally and structurally. The broad substrate specificity of this DAH7PS, the lack of allosteric inhibition, and various structural features indicate that, of the enzymes characterized to date, P. furiosus DAH7PS may be the contemporary protein closest to the ancestral type I enzyme.
Iron is essential to life, but poses severe problems because of its toxicity and the insolubility of hydrated ferric ions at neutral pH. In animals, a family of proteins called transferrins are responsible for the sequestration, transport, and distribution of free iron. Comparison of the structure and function of transferrins with a completely unrelated protein hemopexin, which carries out the same function for heme, identifies molecular features that contribute to a successful protein system for iron acquisition, transport, and release. These include a two-domain protein structure with flexible hinges that allow these domains to enclose the bound ligand and provide suitable chemistry for stable binding and an appropriate trigger for release.
Human lactoferrin is an iron-binding protein with a bilobal structure. Each lobe contains a high-affinity binding site for a single Fe(3+) ion and an associated CO(3)(2-) ion. Although iron binds very tightly, it can be released at low pH, with an accompanying conformational change in which the two domains move apart. The Arg121Asp (R121D) mutant of the N-lobe half-molecule of human lactoferrin was constructed in order to test whether the Asp121 side chain could substitute for the CO(3)(2-) ion at the iron-binding site. The R121D mutant protein was crystallized in its apo form as it lost iron during crystallization. The crystals were also merohedrally twinned, with a twin fraction close to 0.5. Starting from the initial molecular-replacement solution [Breyer et al. (1999), Acta Cryst. D55, 129-138], the structure has been refined at 3.0 A resolution to an R factor of 13.9% (R(free) of 19.9%). Despite the moderate resolution, the high solvent content and non-crystallographic symmetry contributed to electron-density maps of excellent quality. Weakened iron binding by the R121D mutant is explained by occlusion of the anion-binding site by the Asp side chain. The opening of the two domains in the apoR121D structure (a rotation of 54 degrees ) closely matches that of the N-lobe in full-length lactoferrin, showing that the extent of the conformational change depends on properties inherent to the N-lobe. Differences in the C-terminal portion of the N-lobe (residues 321-332) for apoR121D relative to the closed wild-type iron-bound structure point to the importance of this region in stabilizing the open form.
The mammalian iron-binding proteins lactoferrin (Lf) and transferrin (Tf) bind iron very tightly, but reversibly. Despite homologous structures and essentially identical iron binding sites, Tf begins to release iron at pH 6.0, whereas Lf retains iron to pH approximately 3.5. This difference in iron retention gives the two proteins different biological roles. Two lysine residues, Lys 206 and Lys 296, which form a hydrogen-bonded dilysine pair in human Tf, have been shown to strongly influence iron release from the N-lobe. The equivalent residues in human Lf are Arg 210 and Lys 301, and we have here mutated Arg 210 in the N-lobe half-molecule of human lactoferrin, Lf(N), to probe its role in iron release. The Lf(N) mutants R210G, R210E, and R210L were expressed, purified, and crystallized, and their crystal structures were determined and refined at resolutions of 1.95 A (R210G), 2.2 A (R210E), and 2.0 A (R210L). The overall structures are very similar to that of wild-type Lf(N), but with small differences in domain orientations. In each of the mutants, however, Lys 301 (equivalent to Lys 296 in Tf) changes its conformation to fill the space occupied by Arg 210 Neta2 in wild-type Lf(N), interacting with the two tyrosine ligands Tyr 92 and Tyr 192. By comparison with other Lf and Tf structures, we conclude that Lys 301 (or Lys 296 in Tf) only occupies this site when residue 210 (206 in Tf) is nonpositive (neutral as in R210G and R210L or negative as in R210E). Thus, Lys 206 in the Tf dilysine pair is identified as having a depressed pK(a). Three specific sites are variably occupied by polar groups in the Lf mutants and other Lf and Tf proteins, and when coupled with iron-release data, these give new insights into the factors that most influence iron retention at low pH.
Lactoferrin (Lf) and serum transferrin (Tf) combine high-affinity iron binding with an ability to release this iron at reduced pH. Lf, however, retains iron to significantly lower pH than Tf, giving the two proteins distinct functional roles. In this paper, we compared the Ii-on-release profiles for human Lf, Tf, and their N-lobe half-molecules Lf(N) and Tf-N and showed that half of the difference in iron retention at low pH (similar to 1.3 pH units) results from interlobe interactions in Lf. To probe factors intrinsic to the N-lobes, we further examined the specific role of two basic residues that are proposed to form a pH-sensitive dilysine trigger for iron release in the N-lobe of Tf [Dewan, J. C., Mikami, B., Hirose, M., and Sacchettini, J. C, (1993) Biochemistry 32, 11963-11968] by mutating Arg 210 to Lys in the N-lobe half-molecule LfN. The R210K mutant was expressed, purified, and crystallized, and its crystal structure was determined and refined at 2.0-Angstrom resolution to a final R factor (R-free) of 19.8% (25.0%). The structure showed that Lys 210 and Lys 301 in R210K do not form a dilysine interaction like that between Lys 206 and Lys 296 in human Tf. The R210K mutant retained iron to lower pH than Tf-N, consistent with the absence of the dilysine interaction but released iron at approximately 0.7 pH units higher than Lf(N). We conclude that (i) the ability of Lf to retain iron to significantly lower pH than Tf is due equally to interlobe interactions and to the absence in Lfs of an interaction analogous to the dilysine pair in Tfs, even when two lysines are present at the corresponding sequence positions, and (ii) an appropriately positioned basic residue (Arg 210 in human Lf) modulates iron release by inhibiting protonation of the N-lobe iron ligands, specifically His 253.
The three-dimensional structure of human lactoferrin (Lf) was determined by X-ray crystallography in 1987. Three-dimensional structures are now available for other Lfs (bovine, horse and buffalo), for various functional and conformational states, and for recombinant Lfs and site-specific mutants. The picture that emerges is of a protein with highly conserved folding and essentially invariant metal and anion binding sites. Within this conserved framework various kinds of flexibility and variation occur; large domain movements accompany iron binding and release, and local sequence differences lead to changes on the protein surface, or in the domain or lobe interfaces. The ability of Lf to retain iron to much lower pH than its close relative transferrin appears to be due to a pair of basic amino acids close to the N-lobe binding site, and to interlobe communication. Other activities of Lf appear to be mostly related to a highly positively charged region of the surface of the N-lobe (the N-terminus and neighbouring first helix). This region varies somewhat between different species, suggesting that comparative studies with different Lfs would establish which are universal properties and which are species-specific.
The structure of a hemihedrally twinned protein crystal with two molecules in the asymmetric unit was solved by molecular replacement. The protein, a site-specific mutant of the N-terminal half-molecule of human lactoferrin, is able to undergo an internal rigid-body domain motion. Therefore, determining the structure required the independent positioning of four protein domains. The molecular-replacement solutions were obtained using a conventional real-space rotation function, and a translation function based on the linear correlation coefficient. Once the molecules were positioned, it was necessary to assign them to the appropriate twin domain. Several methods for doing this are described, one of which leads to a determination of the volume of each twin domain. In the appendix to the paper we discuss the interpretation of the self-rotation function in the presence of merohedral twinning.