The Cheb Basin, a region of ongoing swarm earthquake activity in the western Czech Republic, is characterized by intense carbon dioxide degassing along two known fault zones – the N–S-striking Počatky–Plesná fault zone (PPZ) and the NW–SE-striking Mariánské Lázně fault zone (MLF). The fluid pathways for the ascending CO2 of mantle origin are one of the subjects of the International Continental Scientific Drilling Program (ICDP) project “Drilling the Eger Rift” in which several geophysical surveys are currently being carried out in this area to image the topmost hundreds of meters to assess the structural situation, as existing boreholes are not sufficiently deep to characterize it. As electrical resistivity is a sensitive parameter to the presence of conductive rock fractions as liquid fluids, clay minerals, and also metallic components, a large-scale dipole–dipole experiment using a special type of electric resistivity tomography (ERT) was carried out in June 2017 in order to image fluid-relevant structures. We used permanently placed data loggers for voltage measurements in conjunction with moving high-power current sources to generate sufficiently strong signals that could be detected all along the 6.5 km long profile with 100 and 150 m dipole spacings. After extensive processing of time series for voltage and current using a selective stacking approach, the pseudo-section is inverted, which results in a resistivity model that allows for reliable interpretations depths of up than 1000 m. The subsurface resistivity image reveals the deposition and transition of the overlying Neogene Vildštejn and Cypris formations, but it also shows a very conductive basement of phyllites and granites that can be attributed to high salinity or rock alteration by these fluids in the tectonically stressed basement. Distinct, narrow pathways for CO2 ascent are not observed with this kind of setup, which hints at wide degassing structures over several kilometers within the crust instead. We also observed gravity and GPS data along this profile in order to constrain ERT results. A gravity anomaly of ca. −9 mGal marks the deepest part of the Cheb Basin where the ERT profile indicates a large accumulation of conductive rocks, indicating a very deep weathering or alteration of the phyllitic basement due to the ascent of magmatic fluids such as CO2. We propose a conceptual model in which certain lithologic layers act as caps for the ascending fluids based on stratigraphic records and our results from this experiment, providing a basis for future drillings in the area aimed at studying and monitoring fluids.

Underlying data for the paper Nickschick, T., Flechsig, C., Mrlina, J., Oppermann, F., Löbig, F. & Günther, T. (2019): Large-scale electrical resistivity tomography in the Cheb Basin (Eger Rift) at an ICDP monitoring drill site to image fluid-related structures. Solid Earth. https://doi.org/10.5194/se-2019-38. The paper contains two types of data: DC resistivity (geoelectrics) ERT data in four profiles-------------------------------------------------------P1, P2 and P3 represent classical multi-electrode ERT data with a unit electrode spacing of a=5m using the Wenner array. They are a representative selection of in total 8 profiles measured in the frame of the (German) MSc work of F. Loebig (there called P2, P5 and P7) where also the lithological section (Fig. 2) was developed:1. P1 between Lesinka and Hnevin, 620m long2. P2 around the Hartousov mofette, 700m long3. P3 between Hartousov and Kacerov, 700m long The inversion results are shown in Fig. 6a,b,c. The large-scale dataset represents data from a dipole-dipole experiment that is in detail described in the paper (Figs. 3-5) with the inversion result given in Fig. 7a along with borehole data.For location see Fig. 1. For all four profiles we provide- measured data with electrode positions on top and the electrode array (abmn) along with the resistance below, topography at the bottom- the configuration file for the inversion software BERT (see https://gitlab.com/resistivity-net/bert), we used version 2.2.9 from January 2019- kml/gpx files denoting the positions of the electrode chains (P1-P3) or an Excel file containing the positions in UTM33N Note that for P2 and the large-scale profile the topography needs to be taken into account whereas it is not necessaryUsers should be able to reproduce the results by callingbert cfgfile all show Gravity data------------The data represent a two-column file:1. position along the ERT profile (projected) in metres2. Bouguer anomaly in mGal See also special README file in the gravity folder.

The Hartoušov mofette field in NW Bohemia, Czech Republic, is characterized by strong CO2 degassing from the Lithospheric Mantle. In a test survey using electrical resistivity tomography, we observed changes over time in the subsurface structure beneath heavily CO2 degassing spots to depths of about 40 m and compared them to CO2 gas flux and soil gas mappings from previous studies. Changes in the electrical resistivity were measured between September 2012 and October 2013 at irregular intervals and highlight large variations in the resistivity distribution where the CO2 degassing was strongest (56 × 103 g m−2 day−1), indicating a fluid-induced change of properties of the underlying clayey sediments. Positive and negative anomalies in the electric self-potential parallel to the ERTs can be found where CO2 degassing occurs which indicates varying ascent or descent of fluids within these spots. Some degassing spots seem not to be actively degassing continuously over time, which can also be observed by other studies in the same area. We suggest that future gas mappings are accompanied by methods that observe the state of fluid systems at subsurface over time, e.g. electric resistivity tomography and self potential.

Microbial life in the continental deep biosphere is closely linked to geodynamic processes, yet this interaction is poorly studied. The Cheb Basin in the western Eger Rift (Czech Republic) is an ideal place for such a study because it displays almost permanent seismic activity along active faults with earthquake swarms up to ML 4.5 and intense degassing of mantle-derived CO2 in conduits that show up at the surface in form of mofettes. We hypothesize that microbial life is significantly accelerated in active fault zones and in CO2 conduits, due to increased fluid and substrate flow. To test this hypothesis, pilot hole HJB-1 was drilled in spring 2016 at the major mofette of the Hartoušov mofette field, after extensive pre-drill surveys to optimize the well location. After drilling through a thin caprock-like structure at 78.5 m, a CO2 blowout occurred indicating a CO2 reservoir in the underlying sandy clay. A pumping test revealed the presence of mineral water dominated by Na+, Ca2+, HCO3−, SO42− (Na-Ca-HCO3-SO4 type) having a temperature of 18.6 °C and a conductivity of 6760 µS cm−1. The high content of sulfate (1470 mg L−1) is typical of Carlsbad Spa mineral waters. The hole penetrated about 90 m of Cenozoic sediments and reached a final depth of 108.50 m in Palaeozoic schists. Core recovery was about 85 %. The cored sediments are mudstones with minor carbonates, sandstones and lignite coals that were deposited in a lacustrine environment. Deformation structures and alteration features are abundant in the core. Ongoing studies will show if they result from the flow of CO2-rich fluids or not.

ABSTRACTBetween the years 2008 and 2013, approximately 67 kilotons of CO2 have been injected at the Ketzin site, Germany. As part of the geophysical monitoring programme, time‐lapse electrical resistivity tomography has been applied using crosshole and surface‐downhole measurements of electrical resistivity tomography. The data collection of electrical resistivity tomography is partly based on electrodes that are permanently installed in three wells at the site (one injection well and two observation wells). Both types of ERT measurements consistently show the build‐up of a CO2‐related resistivity signature near the injection point. Based on the imaged resistivity changes and a petrophysical model, CO2 saturation levels are estimated. These CO2 saturations are interpreted in conjunction with CO2 saturations inferred from neutron‐gamma loggings. Apart from the CO2–brine substitution response in the observed resistivity changes, significant imprints from the dynamic behaviour of the CO2 in the reservoir are observed.

Strong, subcontinental mantle-dominated CO2 degassing occurs in the Hartoušov and Bublák mofette fields in the western Eger Rift. The combination of CO2 gas flux and soil gas measurements as well as gravity and geoelectric surveys provides insight into the surface and subsurface of this unique mofette area. CO2 soil gas and gas flux measurements reveal that large amounts of carbon dioxide are released via channels with diameters below 1 m. Carbon dioxide emissions of several tens and up to more than 100 kg day−1 are ejected via these small seeps. Measurements with small spacings are necessary to account for the point like, focused gas discharge in the lesser degassing surrounding. We estimate that between 23 and 97 tons of CO2 are released over an area of about 350,000 m2 each day in the Hartoušov mofette field. The application of widely used geostatistical tools leads to estimations of the CO2 discharge with very high standard deviations due to the strong positive skewness of the data distribution. Geophysical investigations via electrical resistivity tomography and gravity measurements were carried out over areas of strong seepage and reveal distinct anomalies in the subsurface below mofettes, indicating rock and sediment alterations and/or sediment transport by pressurised, ascending CO2 and water mobilised by it. This study reveals that the gas emanations only occur west of a morphological step which is related to a N–S-oriented fault zone, the Počatky-Plesná fault zone. The results of CO2 mapping and the geophysical studies can track the course of this fault zone in this area. Our results fit into a tectonic model in which the mofette fields are in the centres of two independent pull-apart basin-like structures. We hypothesise that the sinistral strike-slip movement of the Počatky-Plesná fault zone leads to a pull-apart basin-like opening, at which the strong, mantle-derived CO2 degassing occurs nowadays. Since the Hartoušov and Bublák mofette fields only illustrate examples along the N–S-striking Počatky-Plesná fault zone, its role and other N–S-striking faults’ roles of the Regensburg–Leipzig–Rostock zone for upper mantle degassing might have been underestimated previously.

The Mýtina maar is the first known Quaternary maar in the Bohemian Massif. Based on the results of Mrlina et al. (J Volcanol Geother Res 182:97–112, 2009), a multiparametric geophysical (electrical resistivity tomography, gravimetry, magnetometry, seismics) and geological/petrochemical research study had been carried out. The interpretation of the data has provided new information about the inner structure of the volcanic complex: (1) specification of the depth of post-volcanic sedimentary fill (up to ~100 m) and (2) magnetic and resistivity signs of one (or two) hidden volcanic structures interpreted as intrusions or remains of a scoria cone. The findings at the outer structure of the maar incorporate the (1) evidence of circular fracture zones outside the maar, (2) detection and distribution of volcanic ejecta and tephra-fall deposits at the surface, and (3) indications from electrical resistivity tomography and gravity data in the area between the Mýtina maar and Železná hůrka scoria cone, interpreted as a palaeovalley, filled by volcaniclastic rocks, and aligned along the strike line (NW–SE) of the Tachov fault zone. These findings are valuable contributions to extend the knowledge about structure of maar volcanoes in general. Because of ongoing active magmatic processes in the north-east part of the Cheb Basin (ca. 15–30 km north of the investigation area), the Mýtina maar-diatreme volcano and surroundings is a suitable key area for research directed to reconstruction of the palaeovolcanic evolution and assessment of possible future hazard potential in the Bohemian Massif.

The Ebersbrunn diatreme is a deeply eroded (>1 km) diatreme structure in western Saxony, Germany. At current erosion levels, this ultramafic to carbonatitic diatreme is about 2 × 1.5 km in map view, which makes it a large one. Based on shallow drill cores, the diatreme contains coarse unbedded volcaniclastic rocks with up to 80 % country rock fragments. The diatreme is characterised by positive and negative magnetic anomalies, which are controlled mostly by the changing proportions of magnetic minerals in the rocks. The magnetic minerals are themselves contained in the juvenile fraction. Rock magnetic studies on three drill cores, one from the magnetic low and two from magnetic highs, including bulk susceptibility and its anisotropy, temperature dependent susceptibility, various remanence measurements (natural remanent magnetisation, anhysteretic remanence and isothermal remanent magnetisation) and alternating field demagnetisation have been performed. Additionally scanning electron microscope imaging and energy-dispersive X-ray spectroscopy were performed to better characterise the magnetic minerals. Magnetisation is caused by titanomagnetite with slightly varying Ti contents within all cores. Samples from the positive magnetic anomalies have a relatively high degree of anisotropy, but no preferred orientation of one of the principal axes can be seen. The magnetic highs are caused by non-bedded volcaniclastic rocks comparatively rich in juvenile particles. The negative magnetic anomaly is associated with a compaction-like magnetic fabric but without macroscopically visible bedding. Hence, the magnetic low is caused by rocks with a lower content of juvenile material. To the authors’ knowledge, this is the first time rock magnetic methods have been applied to diatreme rocks.

Geodynamic activity in the area of West Bohemia is typified by the occurrence of earthquake swarms, Quaternary volcanism and high flux of mantle-derived CO2. The highest swarm activity occurs beneath the eastern edge of the Cheb basin, which is delineated by the NW-SE trending morphologically pronounced Mariánské Lázně Fault (MLF) controlling the formation of the basin. The previous trenching survey across the MLF zone has identified several fault strands with possible Quaternary activity. In this paper we present the results of the geophysical survey focused to trace the faults signatures in geophysical sections and to build an image of near surface tectonics. The method of electric resistivity tomography (ERT) along two profiles parallel to the trench identified a strong resistivity contrast between the bodies of sandy gravels in the middle and conductive clayey sands to the west and weathered crystalline basement to the east. The 2-D ground penetration radar (GPR) sections show direct correlation of reflections with lithological boundaries identified in the trench. As expected, the GPR signal amplitudes increase with the resistivities found in the ERT sections. Two of the four faults identified in the trench are indicated in the resistivity and GPR sections. A 3-D GPR measurement has identified a spot of high amplitudes elongated parallel to the MLF trend, which coincides with the high resistivity body. To improve the signal-to-noise ratio of the time slices we stacked the GPR time slices within vertically homogeneous blocks. This provided a contrast image of the sand-gravel body including its boundaries in three dimensions. The detailed analysis of the 3-D GPR cube revealed additional fault that limits the highly reflective sands and appears to be offset by another younger fault. Our results suggest a complex fault pattern in the studied area, which deserves a further study.

The Cheb Basin, located in the western Eger (Ohře) Rift, is part of the European Cenozoic Rift system. Although presently non-volcanic, it is the most active area within the European Rift with signs of recent geodynamic activity like emanations of mantle derived CO2, and the repeated occurrence of swarm earthquakes, which are common features in active volcanic regions. It is assumed that the fluids, uprising in permeable channels, play a key role for the genesis of these earthquake swarms.

Temperatures of 100°C are measured at 3 km depth in a well located on the resurgent dome in the center of Long Valley Caldera, California, despite an assumed >800°C magma chamber at 6–8 km depth. Local downflow of cold meteoric water as a process for cooling the resurgent dome is ruled out by a Peclét-number analysis of temperature logs. These analyses reveal zones with fluid circulation at the upper and lower boundaries of the Bishop Tuff, and an upflow zone in the metasedimentary rocks. Vertical Darcy velocities range from 10 to 70 cm a−1. A 21-km-long geoelectrical profile across the caldera provides resistivity values to the order of 100 to >103 Ωm down to a depth of 6 km, as well as variations of self-potential. Interpretation of the electrical data with respect to hydrothermal fluid movement confirms that there is no downflow beneath the resurgent dome. To explain the unexpectedly low temperatures in the resurgent dome, we challenge the common view that the caldera as a whole is a regime of high temperatures and the resurgent dome is a local cold anomaly. Instead, we suggest that the caldera was cooled to normal thermal conditions by vigorous hydrothermal activity in the past, and that a present-day hot water flow system is responsible for local hot anomalies, such as Hot Creek and the area of the Casa Diablo geothermal power plant. The source of hot water has been associated with recent shallow intrusions into the West Moat. The focus of planning for future power plants should be to locate this present-day flow system instead of relying on heat from the old magma chamber.