Workers regularly using vibrating hand tools may develop a disorder referred to as hand-arm vibration syndrome (HAVS). HAVS is characterized by cold-induced vasospasms in the hands and fingers that result in blanching of the skin, loss of sensory function, pain, and reductions in manual dexterity. Exposure to vibration induces some of these symptoms. However, the soft tissues of the hands and fingers of workers are compressed as a result of the force generated when a worker grips a tool. The compression of these soft tissues might also contribute to the development of HAVS. The goal of this study was to use an established rat tail model to determine the mechanisms by which compression of the tail tissues affects (1) the ventral tail artery (VTA) and ventral tail nerves (VTN), (2) nerves and sensory receptors in the skin, (3) dorsal root ganglia (DRG), and (4) spinal cord. Tissue compression resulted in the following changes (1) circulating pituitary and steroid hormone concentrations, (2) expression of factors that modulate vascular function in the skin and tail artery, and (3) factors associated with nerve damage, DRG, and spinal cord. Some of these observed effects differed from those previously noted with vibration exposure. Based upon these findings, the effects of applied force and vibration are different. Studies examining the combination of these factors might provide data that may potentially be used to improve risk assessment and support revision of standards.

OBJECTIVE:This study described the effects of applied force (grip) on vascular and sensorineural function in an animal model of hand-arm vibration syndrome (HAVS). METHODS:Rat tails were exposed to 0, 2, or 4 N of applied force 4 hr/d for 10 days. Blood flow and sensitivity to transcutaneous electrical stimulation and pressure were measured. RESULTS:Applied force increased blood flow but reduced measures of arterial plasticity. Animals exposed to force tended to be more sensitive to 250-Hz electrical stimulation and pressure applied to the tail. CONCLUSIONS:Effects of applied force on blood flow and sensation are different than those of vibration. Studies examining co-exposures to force and vibration will provide data that can be used to determine how these factors affect risk of workers developing vascular and sensorineural dysfunction (ie, HAVS).

Over-exposure of the hand-arm system to intense vibration and force over time may cause degeneration of the vascular, neurological, and musculoskeletal systems in the fingers. A novel animal model using rat tails has been developed to understand the health effects on human fingers exposed to vibration and force when operating powered hand tools or workpieces. The biodynamic responses, such as vibration stress, strain, and power absorption density, of the rat tails can be used to help evaluate the health effects related to vibration and force and to establish a dose-effect relationship. While the biodynamic responses of cadaver rat tails have been investigated, the objective of the current study was to determine whether the biodynamic responses of living rat tails are different from those of cadaver rat tails, and whether the biodynamic responses of both living and cadaver tails change with exposure duration. To make direct comparisons, the responses of both cadaver and living rat tails were examined on four different testing stations. The transfer function of each tail under a given contact force (2 N) was measured at each frequency in the one-third octave bands from 20 to 1000 Hz, and used to calculate the mechanical system parameters of the tails. The transfer functions were also measured at different exposure durations to determine the time dependency of the response. Differences were observed in the vibration biodynamic responses between living and cadaver tails, but the general trends were similar. The biodynamic responses of both cadaver and living rat tails varied with exposure duration.

It has been hypothesized that the biodynamic responses of the human finger tissues to vibration are among the major stimuli that cause vibration health effects. Furthermore, the finger contact pressure can alter these effects. It is difficult to test these hypotheses using human subjects or existing animal models. The objective of this study was to develop a new rat-tail vibration model to investigate the combined effects of vibration and contact pressure and to identify their relationships with the biodynamic responses. Physically, the new exposure system was developed by adding a loading device to an existing rat-tail model. An analytical model of the rat-tail exposure system was proposed and used to formulate the methods for quantifying the biodynamic responses. A series of tests with six tails dissected from rat cadavers were conducted to test and evaluate the new model. The experimental and modeling results demonstrate that the new model behaves as predicted. Unlike the previous model, the vibration strain and stress of the rat tail does not depend primarily on the vibration response of the tail itself but on that of the loading device. This makes it possible to quantify and control the biodynamic responses conveniently and reliably by measuring the loading device response. This study also identified the basic characteristics of the tail biodynamic responses in the exposure system, which can be used to help design the experiments for studying vibration biological effects.

Hand-arm vibration syndrome (HAVS) is characterized by cold-induced vasospasms of peripheral vasculature, by changes in sensorineural function and by pain. Vibration frequency and amplitude along with pressure applied at the fingertips while gripping a tool may also affect vascular and sensorineural function. Little is known about how these two exposure factors interact to affect the risk of developing HAVS. This study uses a newly developed rat tail model to examine the effects of vibration on vascular and sensorineural function. Exposure to 2N of pressure for 10 consecutive days resulted in an increase in blood flow in the tail, which may have been the result of an increased sensitivity of the arteries to acetylcholine. There was also an increased sensitivity of the small myelinated fibbers to electrical stimulation and of the sensory receptors to a pressure stimulus. Based on these findings, pressure has its own effects on vascular and sensorineural physiology, and these effects can be different from those of vibration.

Studies on hand-transmitted vibration exposure, biodynamic responses, and biological effects were conducted by researchers at the Health Effects Laboratory Division (HELD) of the National Institute for Occupational Safety and Health (NIOSH) during the last 20 years. These studies are systematically reviewed in this report, along with the identification of areas where additional research is needed. The majority of the studies cover the following aspects: (i) the methods and techniques for measuring hand-transmitted vibration exposure; (ii) vibration biodynamics of the hand–arm system and the quantification of vibration exposure; (iii) biological effects of hand-transmitted vibration exposure; (iv) measurements of vibration-induced health effects; (iv) quantification of influencing biomechanical effects; and (v) intervention methods and technologies for controlling hand-transmitted vibration exposure. The major findings of the studies are summarized and discussed.

Prolonged and intensive vibration exposures during the grinding of handheld workpieces may cause hand-arm vibration syndrome. The objectives of this study are to develop an on-the-hand method for evaluating vibration-reducing (VR) gloves, and to determine whether VR gloves can significantly reduce the vibration exposures. A worker holding and pressing a typical workpiece (golf club head) against a grinding wheel or belt in order to shape the workpiece was simulated, and the input vibration and those on the workpiece and hand-arm system were measured. Ten human subjects participated in the experiment. The results demonstrate that VR gloves significantly reduced the vibrations at the palm, hand dorsum, and wrist. The grinding interface condition and hand feed force did not substantially affect glove effectiveness. The use of gloves slightly increased the workpiece resonant response, but the resonant response did not significantly affect glove effectiveness. This study concluded that the use of VR gloves can help control vibration exposures of workers performing grinding of handheld workpieces.

The objective of this study is to characterize the vibration responses of a handheld workpiece and the hand–arm system, which is an important step toward identifying and developing effective methods and technologies for controlling the vibration exposures to workers performing the grinding of handheld workpieces. This study established a method for measuring the vibration responses of the entire workpiece–hand–arm system; the vibration exposure of a worker holding and pressing a typical workpiece against a sanding belt or grinding wheel in order to shape the workpiece was simulated. This method was applied to measure the apparent mass and vibration transmissibility of the system under two different feed forces (15 N and 30 N) and six simulated grinding interfaces with different stiffness values. A major resonance was observed in each transmissibility spectrum of the workpiece, which was correlated with the major resonance of the impedance of the entire system. This resonant frequency depended primarily on the workpiece mass and the grinding interface stiffness, but the hand–arm system could substantially affect the resonance magnitude. The feed force also significantly affected the resonance frequency and magnitude. While increasing the feed force increased the overall vibration transmissibility on the hand–arm system, the transmissibility with respect to the workpiece was not significantly affected by the interface conditions. The implications of the results are discussed.

The effectiveness of vibration-reducing (VR) gloves is conventionally assessed based on the vibration transmissibility of the gloves. This study proposed a method for analyzing and assessing the effectiveness of VR gloves based on how gloves affect the vibration power absorption (VPA) of the hand–arm system and its distribution. A model of the entire tool–handle–glove–hand–arm system was used to predict the VPA distributed in the glove and across the substructures of the hand–arm system. The ratio of the gloved-VPA and ungloved-VPA in each group of system substructures was calculated and used to quantify VR glove effectiveness, which was termed the VPA-based glove vibration transmissibility in this study. The VPA-based transmissibility values were compared with those determined using to-the-hand and on-the-hand methods. Three types of gloves (ordinary work glove, gel VR glove, and air bubble VR glove) were considered in the modeling analyses. This study made the following findings: the total VPA-based transmissibility spectrum exhibits some similarities with those determined using the other two methods; the VPA-based transmissibility for the wrist–forearm–elbow substructures is identical to that for the upper–arm–shoulder substructures in the model used in this study; each of them is equal to the square of the glove vibration transmissibility determined using the on-the-wrist method or on-the-upper-arm method; the other substructure-specific VPA-based transmissibility spectra exhibit some unique features; the effectiveness of a glove for reducing the overall VPA in the hand–arm system depends on the glove effectiveness for absorbing the vibration energy, which seems to be associated primarily with the glove cushioning materials; the glove may also help protect the fingers or hand by redistributing the VPA across the hand substructures; this redistribution seems to be primarily associated with the glove structural properties, especially the tightness of fit for the glove.

The helmets used by construction site workers are mainly designed for head protection when objects are dropped from heights. Construction helmets are also casually called "hard hats" in industries. Common construction helmets are mostly categorized as type 1 according to different standards. All type 1 helmets have to pass type 1 standard impact tests, which are top impact tests-the helmet is fixed and is impacted by a free falling impactor on the top crown of the helmet shell. The purpose of this study was to develop an approach that can determine the performance characterization of a helmet. A total of 31 drop impact tests using a representative type 1 helmet model were performed at drop heights from 0.30 to 2.23 m, which were estimated to result in impact speeds from 2.4 to 6.6 m/s. Based on our results, we identified a critical drop height that was used to evaluate the performance of helmets. The peak impact forces and peak accelerations varied nonproportionally with the drop height. When the drop height is less than the critical height, the peak force and peak acceleration increase gradually and slowly with increasing drop height. When the drop height is greater than the critical height, the peak force and peak acceleration increase steeply with even a slight increase in drop height. Based on the critical drop height, we proposed an approach to determine the safety margin of a helmet. The proposed approach would make it possible to determine the performance characteristics of a helmet and to estimate the safety margin afforded by the helmet, if the helmet first passes the existing standardized tests. The proposed test approach would provide supplementary information for consumers to make knowledgeable decisions when selecting construction helmets.

The objective of this study is to identify effective engineering methods for controlling handheld workpiece vibration during grinding processes. Prolonged and intensive exposures to such vibration can cause hand-arm vibration syndrome among workers performing workpiece grinding, but how to effectively control these exposures remains an important issue. This study developed a methodology for performing their analyses and evaluations based on a model of the entire grinding machine-workpiece-hand-arm system. The model can simulate the vibration responses of a workpiece held in the worker's hands and pressed against a grinding wheel in order to shape the workpiece in the major frequency range of concern (6.3-1600 Hz). The methodology was evaluated using available experimental data. The results suggest that the methodology is acceptable for these analyses and evaluations. The results also suggest that the workpiece vibration resulting from the machine vibration generally depends on two mechanisms or pathways: (1) the direct vibration transmission from the grinding machine; and (2) the indirect transmission that depends on both the machine vibration transmission to the workpiece and the interface excitation transformation to the workpiece vibration. The methodology was applied to explore and/or analyze various engineering methods for controlling workpiece vibrations. The modeling results suggest that while these intervention methods have different advantages and limitations, some of their combinations can effectively reduce the vibration exposures of grinding workers. These findings can be used as guidance for selecting and developing more effective technologies to control handheld workpiece vibration exposures.

The objective of this study was to develop a convenient and reliable adapter method for testing and evaluating vibration-reducing (VR) gloves and VR materials at the fingers. The general requirements and technical specifications for the design of the new adapter were based on our previous studies of hand-held adapters for vibration measurement and a conceptual model of the fingers-adapter-glove-handle system developed in this study. Two thicknesses (2 mm and 3 mm) of the adapter beam were fabricated using a 3-D printer. Each adapter is a thin beam equipped with a miniature tri-axial accelerometer (1.1 g) mounted at its center, with a total weight ≤ 2.2 g. To measure glove vibration transmissibility, the adapter is held with two gloved fingers; a finger is positioned on each side of the accelerometer. Each end of the adapter beam is slotted between the glove material and the finger. A series of experiments was conducted to evaluate this two-fingers-held adapter method by measuring the transmissibility of typical VR gloves and a sample VR material. The experimental results indicate that the major resonant frequency of the lightweight adapter on the VR material (≥800 Hz) is much higher than the resonant frequencies of the gloved fingers grasping a cylindrical handle (≤300 Hz). The experimental results were repeatable across the test treatments. The basic characteristics of the measured glove vibration transmissibility are consistent with the theoretical predictions based on the biodynamics of the gloved fingers-hand-arm system. The results suggest that VR glove fingers can effectively reduce only high-frequency vibration, and VR effectiveness can be increased by reducing the finger contact force. This study also demonstrated that the finger adapter method can be combined with the palm adapter method prescribed in the standardized glove test, which can double the test efficiency without substantially increasing the expense of the test.

The objective of this study was to develop a vibration model of a grinding machine-workpiece-hand-arm system. A lumped-parameter model structure of the system was proposed, and its major parameters were determined using the mechanical impedance measured at the grinding point of a typical workpiece (golf club head) held by two hands and referenced to the vibration transmissibility spectra measured at the wrist and on the upper arm of human subjects. The model reasonably predicted the vibration transmissibility spectra measured on the club head and the driving-point response function when the grinding contact stiffness was below a certain value. This suggests that the model is acceptable not only to enhance the understanding of the system responses, but also to explore some engineering methods for controlling vibration exposures during the grinding process. The identified model parameters reveal that the major resonance of the handheld workpiece depends primarily on its mass and grinding contact stiffness. The feed force applied in the grinding process can substantially affect the grinding contact stiffness; as a result, it can significantly influence the resonance. Vibration-reducing gloves can marginally increase the workpiece resonance, but these gloves can reduce some vibration transmitted to the hand-arm system. This study also clarified an important mechanism for the prediction errors of linear human vibration models, which is useful to further improve human vibration modeling.

The rehabilitation squeeze ball is a popular device to help strengthen the hand, fingers and forearm muscles. The distributions of the contact pressure in the interface between the therapy ball and hand/fingers can affect the joint moment of each of the individual fingers, thereby affecting rehabilitation effects. In the current study, we evaluated the contact force distributions on the fingers when gripping a spherical object. Eight female adults [age 29 (9.1) years, mass 64.6 (7.1) kg, height 163.5 (1.9) cm, hand length 17.2 (0.7) cm] participated in the study. Contact force sensors were attached to the middle of the palmar surfaces of the distal, middle, and proximal phalanges of the four fingers in the longitudinal direction. In order to evaluate the effects of the ball stiffness on the contact force distributions on the fingers, subjects were requested to perform quasi-static gripping on a standard tennis ball and on a rehabilitation ball. The tennis ball is much stiffer and experiences smaller deformation under compression compared to the rehabilitation ball. We analyzed the force share among the distal, middle, and proximal finger segments, when subjects gripping balls of different stiffnesses (tennis ball vs. rehabilitation ball) and at three different grip efforts. Our results indicated that the grip force is contributed about 60% and 40% by the middle/ring fingers and by the index/little fingers, respectively. These characteristics are independent of the grip force levels and stiffness of the contact surface.

To control vibration-induced white finger among workers performing the fine grinding of golf club heads, the aims of this study are to clarify the major vibration sources in the grinding process, to identify and understand the basic characteristics of the club head vibration, and to propose potential approaches for reducing the vibration exposure. The vibrations on two typical club heads and two belt grinding machines were measured at a workplace. A simulated test station was also constructed and used to help examine some influencing factors of the club head vibration. This study found that the club head vibration was the combination of the vibration transmitted from the grinding machines and that generated in the grinding process. As a result, any factor that affects the machine vibration, the grinding vibration, and/or the dynamic response of the club head can influence the vibration exposure of the fingers or hands holding the club head in the grinding process. The significant influencing factors identified in the study include testing subject, grinding machine, machine operation speed, drive wheel condition, club head model, mechanical constraints imposed on the club head during the grinding, and machine foot pad. These findings suggest that the vibration exposure can be controlled by reducing the grinding machine vibration, changing the workpiece dynamic properties, and mitigating the vibration transmission in its pathway. Many potential methods for the control are proposed and discussed. Relevance to industry: Vibrations on handheld workpieces can be effectively transmitted to the hands, especially the fingers. As a result, a major component of the hand-arm vibration syndrome - vibration induced white finger- has been observed among some workers performing the grinding and/or polishing tasks of the handheld workpieces such as golf club heads. The results of this study can be used to develop more effective methods and technologies to control the vibration exposure of these workers. This may help effectively control this occupational disease. (C) 2016 Published by Elsevier B.V.

Some powered hand tools can generate significant vibration at frequencies below 25 Hz. It is not clear whether such vibration can be effectively transmitted to the upper arm, shoulder, neck, and head and cause adverse effects in these substructures. The objective of this study is to investigate the vibration transmission from the human hands to these substructures. Eight human subjects participated in the experiment, which was conducted on a 1-D vibration test system. Unlike many vibration transmission studies, both the right and left hand-arm systems were simultaneously exposed to the vibration to simulate a working posture in the experiment. A laser vibrometer and three accelerometers were used to measure the vibration transmitted to the substructures. The apparent mass at the palm of each hand was also measured to help in understanding the transmitted vibration and biodynamic response. This study found that the upper arm resonance frequency was 7-12 Hz, the shoulder resonance was 7-9 Hz, and the back and neck resonances were 6-7 Hz. The responses were affected by the hand-arm posture, applied hand force, and vibration magnitude. The transmissibility measured on the upper arm had a trend similar to that of the apparent mass measured at the palm in their major resonant frequency ranges. The implications of the results are discussed. Relevance to industry: Musculoskeletal disorders (MSDs) of the shoulder and neck are important issues among many workers. Many of these workers use heavy-duty powered hand tools. The combined mechanical loads and vibration exposures are among the major factors contributing to the development of MSDs. The vibration characteristics of the body segments examined in this study can be used to help understand MSDs and to help develop more effective intervention methods. Published by Elsevier B.V.

It is known that the vibration characteristics of the fingers and hand and the level of grip action interacts when operating a power tool. In the current study, we developed a hybrid finger model to simulate the vibrations of the hand-finger system when gripping a vibrating handle covered with soft materials. The hybrid finger model combines the characteristics of conventional finite element (FE) models, multi-body musculoskeletal models, and lumped mass models. The distal, middle, and proximal finger segments were constructed using FE models, the finger segments were connected via three flexible joint linkages (i.e., distal interphalangeal joint (DIP), proximal interphalangeal joint (PIP), and metacarpophalangeal (MCP) joint), and the MCP joint was connected to the ground and handle via lumped parameter elements. The effects of the active muscle forces were accounted for via the joint moments. The bone, nail, and hard connective tissues were assumed to be linearly elastic whereas the soft tissues, which include the skin and subcutaneous tissues, were considered as hyperelastic and viscoelastic. The general trends of the model predictions agree well with the previous experimental measurements in that the resonant frequency increased from proximal to the middle and to the distal finger segments for the same grip force, that the resonant frequency tends to increase with increasing grip force for the same finger segment, especially for the distal segment, and that the magnitude of vibration transmissibility tends to increase with increasing grip force, especially for the proximal segment. The advantage of the proposed model over the traditional vibration models is that it can predict the local vibration behavior of the finger to a tissue level, while taking into account the effects of the active musculoskeletal force, the effects of the contact conditions on vibrations, the global vibration characteristics. Published by Elsevier Ltd on behalf of IPEM.