A hypersilyl half-sandwich silicon(ii) complex in action.
Bridging quinonoid ligands are important platforms for generating metal-based switchable optoelectronic and magnetic materials. A possible sound way of influencing the properties of the aforementioned materials is to modify the direct metal-ligand interface. We present herein a series of dinuclear RuII complexes where the set of donor atoms at the bridging quinonoid ligands range from [O,O,O,O], [O,O,O,N], [O,N,O,N] and [O,N,O,N']. Additionally, the substituents on the N-donors were varied as well (a total of eight different quinonoid bridges are compared). We also present a mononuclear RuII complex for comparison purposes. The dinuclear complexes act as switchable NIR dyes, absorbing in the NIR region in their mixed-valent RuII/RuIII form but not in the neighboring RuII/RuII and RuIII/RuIII states. The switching potentials (the potentials at which NIR absorptions appear) and the λmax of the NIR band can be fine-tuned by varying the donor atoms as well as the electron-donating ability of the substituents on the nitrogen atoms (tuning E by ca. 0.4 V and λmax by ca. 450 nm). Introducing more electron-rich substituents at the nitrogen atoms of the bridge results in higher band energies and more cathodic redox potentials. Unsymmetrical bridging ligands increase the thermodynamic stability of the mixed-valent state. Whereas almost all of the mixed-valent species presented here belong to the delocalised type III of the Robin-Day classification, the most unsymmetrical complex 2O,N(Mes) shows characteristic signs of a borderline Class-II-III compounds. This comprehensive study thus establishes the lesser used unsymmetrically substituted quinones as excellent bridges for generating and tuning a series of properties in their corresponding metal complexes.
Azocarboxamides occupy a special place among azo ligands owing to their versatility for metal coordination. Herein ruthenium complexes with two different azocarboxamide ligands that differ in the presence (or not) of a coordinating pyridyl heterocycle are presented. By making full use of the O,N(amide), N(azo), and N(pyridyl) coordinating sites, the first diruthenium complex that is bridged by an azo ligand containing two different binding pockets was obtained. Moreover, it was conclusively proven that, in the mononuclear complexes, oxidation at the ruthenium center leads to a complete change of coordination at the chelating binding pocket. The complexes were characterized by NMR spectroscopy, mass spectrometry, and single-crystal X-ray diffraction. Additionally, the mechanism of the aforementioned redox-triggered change in the chelating binding pocket and the electronic structures of all the complexes were investigated by a combination of electrochemistry, UV/Vis/NIR/EPR spectroelectrochemistry, and DFT calculations. This is first instance in which a redox-driven change in the complete chelating binding pocket has been observed in a ruthenium complex as well as with azo-based ligands. These results thus show the potential of these versatile azocarboxamide ligands to act as redox-driven switches with possible relevance to electrocatalysis.
The cover picture shows the versatility of click derived ligands of various denticities and the use of the metal complexes of such ligands for diverse chemical and physical applications. Details can be found in the review by David Schweinfurth et al. on page 554 ff.
Even though the existence of 1,2,3-triazoles has been known for more than a century, the recent discovery of a copper(I) catalyzed version of this reaction has attributed unprecedented importance to these compounds. Coordination and organometallic chemists have benefited from this modular synthetic route, and have accessed ligands based on both the triazoles as well as the triazolylidenes. The wide variation of steric and electronic properties that can be achieved for this ligand class has made them useful for generating metal complexes with various applications. Examples include, among others: magnetically switchable molecules, electro- and photo-active molecules, molecules for light-emitting electrochemical cells, dyes for dye-sensitized solar cells and a host of homogeneous catalytic processes. In this contribution, we present recent developments in this field with examples of some selected ligands. The focus is on systems developed in our group over the past few years.
An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.
Understanding the origin of magnetic anisotropy and having the ability to tune it are essential needs of the rapidly developing field of molecular magnetism. Such attempts at determining the origin of magnetic anisotropy and its tuning are still relatively infrequent. One candidate for such attempts are mononuclear Co(II) complexes, some of which have recently been shown to possess slow relaxation of their magnetization. In this contribution we present four different five-coordinated Co(II) complexes, 1-4, that contain two different "click" derived tetradentate tripodal ligands and either Cl- or NCS- as an additional, axial ligand. The geometric structures of all four complexes are very similar. Despite this, major differences are observed in their electronic structures and hence in their magnetic properties as well. A combination of temperature dependent susceptibility measurements and high-frequency and -field EPR (HFEPR) spectroscopy was used to accurately determine the magnetic properties of these complexes, expressed through the spin Hamiltonian parameters: g-values and zero-field splitting (ZFS) parameters D and E. A combination of optical d-d absorption spectra together with ligand field theory was used to determine the B and Dq values of the complexes. Additionally, state of the art quantum chemical calculations were applied to obtain bonding parameters and to determine the origin of magnetic anisotropy in 1-4. This combined approach showed that the D values in these complexes are in the range from -9 to +9 cm-1. Correlations have been drawn between the bonding nature of the ligands and the magnitude and sign of D. These results will thus have consequences for generating novel Co(II) complexes with tunable magnetic anisotropy and hence contribute to the field of molecular magnetism.
An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.
The compounds [W(CO)(5)(btd)], [W(CO)(5)(bsd] and [Re(CO)(3)(bpy)(bsd)](BF4), btd = 2,1,3-benzothiadiazole and bsd = 2,1,3-benzoselenadiazole were isolated and characterized experimentally (crystal structure, spectroscopy, spectroelectrochemistry) and by density functional theory calculations. The results confirm single N-coordination in all cases, binding to Se was calculated to be less favorable. Studies of one-electron reduced forms indicate that the N-coordination is maintained during electron transfer.
An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.
We have developed a one-step synthesis of 5,6-dicyano-7-(diphenylvinyl)-7H-benzo[c]fluorenes, starting from easily accessible tetraaryl[3]cumulenes and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ). In the proposed mechanism, this transformation is initiated by single-electron transfer from the cumulene to DDQ with subsequent ring closure. In the next step, [4+2] cycloaddition of an additional DDQ molecule is followed by transformation of the formed cycloadducts, which provides new 5,6-dicyanobenzo[c]fluorene derivatives in fair to good yields. Isolated intermediates and time-resolved EPR spectroscopy measurements support our mechanistic proposal. Furthermore, X-ray crystallographic proof for the postulated structures as well as for the reaction intermediates is provided. The optoelectronic properties of these new chromophores were derived from UV/Vis spectroscopy, electrochemical, and computational studies. Additionally, the aromaticity of the new polycyclic aromatic backbone was analyzed by using nucleus-independent chemical shift (NICS)-XY-scans.
Tuning of the geometric and electronic properties of a transition metal center through manipulation of the secondary coordination sphere is an important topic in contemporary chemistry. In this contribution we present mononuclear iron(II) and cobalt(II) complexes that contain click-derived tripodal ligands with peripheral phenyl substituents on the backbone. A comparison of the complexes presented here with those of previously reported complexes shows that the substituents at the ligand backbone dictate the first coordination environment at the metal center, and hence, its geometric structure. The substituents also have a decisive influence on the spin state of the metal centers. Apart from synthesis and characterization, single-crystal X-ray diffraction studies and magnetometric measurements have been performed to investigate the properties of these complexes. We show here how the modification of the peripheral substituents in these increasingly popular tripodal ligands can influence the geometric and electronic structures of the reported metal complexes. These results are likely to have an impact in the field of magnetism related to such complexes, as well as in the study of spin state dependent reactivity in related iron(II) and cobalt(II) complexes.
Azocarboxamides were used as chelating ligands in ruthenium half-sandwich complexes. The synthesis and characterization of two new complexes with an unprecedented coordination motif are presented together with an in-depth investigation of two recently published complexes. Three different coordination modes of the ligands were realized, as evident by NMR spectroscopy and single-crystal X-ray diffraction. The use of base during the synthesis leads to a coordination of a deprotonated ligand, while the introduction of additional donor atoms results in a noncoordinated amide group. The first systematic experimental (cyclic voltammetry and UV–vis–NIR and EPR spectroelectrochemistry) and theoretical (DFT) investigation of the electronic structure of metal complexes bearing this redox-active ligand class is presented, revealing redox processes with ligand contribution. The absorption spectra and electrochemistry are mainly determined by the protonation state of the ligand. While complexes 2[PF6], 3[PF6], and 4[PF...
The azide anion is widely used as a ligand in coordination chemistry. Despite its ubiquitous presence, controlled synthesis of azido complexes remains a challenging task. Making use of click-derived tripodal ligands, we present here various coordination motifs of the azido ligands, the formation of which appears to be controlled by the peripheral substituents on the tripodal ligands with otherwise identical structure of the coordination moieties. Thus, the flexible benzyl substituents on the tripodal ligand TBTA led to the formation of the first example of an unsupported and solely μ1,1-azido-bridged dicobalt(II) complex. The more rigid phenyl substituents on the TPTA ligand deliver an unsupported and solely μ1,3-azido-bridged dicobalt(II) complex. Bulky diisopropylphenyl substituents on the TDTA ligand deliver a doubly μ1,1-azido-bridged dicobalt(II) complex. Intriguingly, the mononuclear copper(II) complex [Cu(TBTA)N3]+ is an excellent synthon for generating mixed dinuclear complexes of the form [(TBTA)Co(μ1,1-N3)Cu(TBTA)]3+ or [(TBTA)Cu(μ1,1-N3)Cu(TPTA)]3+, both of which contain a single unsupported μ1,1-N3 as a bridge. To the best of our knowledge, these are also the first examples of mixed dinuclear complexes with a μ1,1-N3 monoazido bridge. All complexes were crystallographically characterized, and selected examples were probed via magnetometry and high-field EPR spectroscopy to elucidate the electronic structures of these complexes and the nature of magnetic coupling in the various azido-bridged complexes. These results thus prove the power of click-tripodal ligands in generating hitherto unknown chemical structures and properties.
The synthesis of redox-active p- and o-quinones 2-phenylamino-4-phenylimino[6]helicene-1-one 1, 2-phenylamino[6]-helicene-1,4-dione 2, and 4-phenyl[6]helicene-1,2-dione 3 in their enantiopure forms by post-functionalization of (P)- and (M)-1,2-dimethoxy[6]helicene is presented. Structural characterization in solution and in the solid state was accomplished by 2D NMR spectroscopy methods and X-ray diffraction analysis, respectively. Interpretation of electrochemical redox data was accompanied by a detailed orbital picture, derived from DFT calculations. The electronic structures of compounds 1-3 were investigated by UV/Vis and electronic circular dichroism (ECD) spectroscopy, complemented by TD-DFT calculations. Quinones 1-3 were chemically reduced to study the EPR signatures of their respective radical anions. DFT methods were used for the atom assignment of the hyperfine coupling constants. The results are discussed within the context of electrochromic chiral switches and molecular recognition.
2,5-Dihydroxy-1,4-benzoquinone (dhbq) has been extensively used as a ligand for generating mono and polynuclear complexes. In recent years, new ligand classes have been developed where one or more of the "O" groups of the dhbq unit have been replaced with isoelectronic "NR" groups. The resulting ligands have been used for synthesizing dinuclear assemblies that have been utilized for investigating metal-metal interaction, generation of electrochromic NIR dyes, studies of unusual chemical reactivity, for small molecule activation and for homogenously catalysis. Additionally, these ligand platforms have also been used for studying spin-spin coupling and for the generation of switchable molecular magnetic materials. In the following, we report on the recent developments on the generation of functional metal complexes with this ligand class, with a particular focus on the ligands with [O, N, O, NI donor sets based on a 2,5-di-[(substituted)-anilino]-1,4-benzoquinone platform. (C) 2015 Elsevier B.V. All rights reserved.
The azido ligand is one of the most investigated ligands in magnetochemistry. Despite its importance, not much is known about the ligand field of the azido ligand and its influence on magnetic anisotropy. Here we present the electronic structure of a novel five-coordinate Co(II)-azido complex (1), which has been characterized experimentally (magnetically and by electronic d-d absorption spectroscopy) and theoretically (by means of multireference electronic structure methods). Static and dynamic magnetic data on 1 have been collected, and the latter demonstrate slow relaxation of the magnetization in an applied external magnetic field of H = 3000 Oe. The zero-field splitting parameters deduced from static susceptibility and magnetizations (D = -10.7 cm(-1), E/D = 0.22) are in excellent agreement with the value of D inferred from an Arrhenius plot of the magnetic relaxation time versus the temperature. Application of the so-called N-electron valence second-order perturbation theory (NEVPT2) resulted in excellent agreement between experimental and computed energies of low-lying d-d transitions. Calculations were performed on 1 and a related four-coordinate Co(II)-azido complex lacking a fifth axial ligand (2). On the basis of these results and contrary to previous suggestions, the N3(-) ligand is shown to behave as a strong σ and π donor. Magnetostructural correlations show a strong increase in the negative D with increasing Lewis basicity (shortening of the Co-N bond distances) of the axial ligand on the N3(-) site. The effect on the change in sign of D in going from four-coordinate Co(II) (positive D) to five-coordinate Co(II) (negative D) is discussed in the light of the bonding scheme derived from ligand field analysis of the ab initio results.
The donor–acceptor complex [(O,NQ2–)Pt(pap0)] (1; pap = phenylazopyridine, O,NQ0 = 4,6-di-tert-butyl-N-phenyl-o-iminobenzoquinone), which displays strong π-bonding interactions and shows strong absorption in the near-IR region, has been investigated with respect to its redox-induced reactivity and electrochemical and excited-state properties. The one-electron-oxidized product [(O,NQ•–)Pt(pap0)](BF4) ([1]BF4) was chemically isolated. Single-crystal X-ray diffraction studies establish the iminosemiquinone form of O,NQ in [1]+. Simulation of the cyclic voltammograms of 1 recorded in the presence of PPh3 elucidates the mechanism and delivers relevant thermodynamic and kinetic parameters for the redox-induced reaction with PPh3. The thermodynamically stable product of this reaction, complex [(O,NQ•–) Pt(PPh3)2](PF6) ([2]PF6), was isolated and characterized by X-ray crystallography, electrochemistry, and electron paramagnetic resonance spectroscopy. Picosecond time-resolved infrared spectroscopic studies on complex 1b (one of the positional isomers of 1) and its analogue [(O,OQ2–)Pt(pap0)] (3; O,OQ = 3,5-di-tert-butyl-o-benzoquinone) provided insight into the excited-state dynamics and revealed that the nature of the lowest excited state in the amidophenolate complex 1b is primarily diimine-ligand-based, while it is predominantly an interligand charge-transfer state in the case of 3. Density functional theory calculations on [1]n+ provided further insight into the nature of the frontier orbitals of various redox forms and vibrational mode assignments. We discuss the mechanistic details of the newly established redox-induced reactivity of 1 with electron donors and propose a mechanism for this process.