Therapeutic drug monitoring (TDM) of antibiotics (ATB) in patients with serious bacterial infections allows optimization of the efficacy of the treatment while reducing the risk of toxicity. Notably, early measurement of plasma beta-lactam concentration has been shown to be associated with reduced mortality in intensive care patients. In this context, a rapid, robust, and accurate assay method is essential for daily TDM.A fully automated procedure for quantification of the plasma concentrations of ten ATB was developed. The ATB were divided into two calibration pools, with Pool 1: aztreonam, ceftobiprole, cefoxitin, avibactam, tazo-bactam and Pool 2: metronidazole, ceftriaxone, daptomycin, ceftolozane, moxifloxacin. Sample preparation consisting of acetonitrile plasma protein precipitation and H20 dilution was applied to all analytes. This pro-cedure was carried out by an automated sample preparation system directly coupled to a liquid chromatography -tandem mass spectrometry (LC-MS/MS) system. Since the instrument extracts sample n while sample n-1 is in the LC-MS/MS system, the delay between obtaining the results for two samples corresponds to the analytical run time, which is less than 7 min.The method was validated according to the Food and Drug Administration guidelines. The method was sen-sitive (lower limit of quantification 0.1-1 mg/L, depending on the ATB), accurate (intra/inter-assay bias-14.8 to 14.2 %) and precise (intra/inter-assay CVs 1.27 to 16.3 %). Application of the TDM assay was illustrated by the report of an intensive care patient treated with the ceftazidime/aztreonam/avibactam combination. Four assays were performed in 8 days with results returned within 24 h to quickly manage the dose regimen in this patient.An automated, simple, rapid, robust LC-MS/MS analysis was developed and validated for the simultaneous quantification of plasma concentrations of 10 ATB and was applied with success to perform TDM. This method provides a shorter turnaround time than classic sample batch-based analytical methods.

Fluoropyrimidines-based chemotherapies are the backbone in the treatment of many cancers. However, the use of 5-fluorouracil and its oral pre-prodrug, capecitabine, is associated with an important risk of toxicity. This toxicity is mainly due to a deficiency of dihydropyrimidine dehydrogenase (DPD). This deficiency may be detected by using a phenotypic approach that consists in the measurement of uracilemia or the calculation of dihydrouracil (UH2)/uracil (U) ratio. For uracilemia, a threshold value of 16 ng/ml has been proposed for partial deficiency, while a value of 150 ng/ml has been proposed for complete deficiency. We have developed a rapid, accurate and fully-automated procedure for the quantification of U and UH2 in plasma. Sample extraction was carried out by a programmable liquid handler directly coupled to a liquid chromatography - tandem mass spectrometry (LC-MS/MS) system. The method was validated according to the EMA guidelines and ISO 15189 requirements and was applied to real patient samples (n = 64). The limit of quantification was 5 and 10 ng/ml for U and UH2 respectively. Imprecision and inaccuracy were less than 15% for inter and intra-assay tests. Comparison with dedicated routine method showed excellent correlation. An automated procedure perfectly fulfills the need of low inaccuracy and CVs at the threshold values (less than 5% at 16 ng/ml) and is highly suitable for the characterization of DPD deficiency. Automatization should guaranty reliable and robust performances by minimizing the sources of variation such as volume inaccuracies, filtration or manual extraction related errors.