Chemical productions operated in extreme conditions (high pressure, high temperature) require a detailed analysis of all potentially dangerous situations that can lead to a major industrial accident and thus cause a loss of life and property. Many accidents in the near or distant history underline the need of a detailed safety analysis in process industries, not only in the phase of plant design but also during the operation of the plant. It would be shown that simulation of a chemical unit using an appropriate mathematical model and the nonlinear analysis theory can be a suitable tool for safety analysis. This approach is based on mathematical modeling of a process unit where both the steady-state analysis, including the analysis of the steady states multiplicity and stability, and the dynamic simulation are used. Principal objective of this paper is to summarize problems regarding the model-based hazard identification in processes. A case study, focused on phenomena of multiple steady states in ammonia synthesis reactor will be presented. The influence of the model complexity and model parameters uncertainly on the quality of safety analysis would be underline.

Pyrolysis of aseptic packages (tetrapak cartons) in a laboratory apparatus using a flow screw type reactor and a secondary catalytic reactor for tar cracking was studied. The pyrolysis experiments were realized at temperatures ranging from 650 °C to 850 °C aimed at maximizing of the amount of the gas product and reducing its tar content. Distribution of tetrapak into the product yields at different conditions was obtained. The presence of H2, CO, CH4, CO2 and light hydrocarbons, HCx, in the gas product was observed. The Aluminum foil was easily separated from the solid product. The rest part of char was characterized by proximate and elemental analysis and calorimetric measurements. The total organic carbon in the tar product was estimated by elemental analysis of tars. Two types of catalysts (dolomite and red clay marked AFRC) were used for catalytic thermal tar decomposition. Three series of experiments (without catalyst in a secondary cracking reactor, with dolomite and with AFRC) at temperatures of 650, 700, 750, 800 and 850 °C were carried out. Both types of catalysts have significantly affected the content of tars and other components in pyrolytic gases. The effect of catalyst on the tetrapack distribution into the product yield on the composition of gas and on the total organic carbon in the tar product is presented in this work.