Ultralight axionlike particles (ALPs) can be a viable solution to the dark matter problem. The scalar field associated with ALPs, coupled to the electromagnetic field acts as an active birefringent medium, altering the polarization properties of light through which it propagates. In particular, oscillations of the axionic field induce monochromatic variations of the plane of linearly polarized radiation of astrophysical signals. The radio emission of millisecond pulsars provides an excellent tool to search for such manifestations, given their high fractional linear polarization and negligible fluctuations of their polarization properties. We have searched for evidence of ALPs in polarimetry measurements of pulsars collected and preprocessed for the European Pulsar Timing Array (EPTA) campaign. Focusing on the twelve brightest sources in linear polarization, we searched for an astrophysical signal from axions using both frequentist and Bayesian statistical frameworks. For the frequentist analysis, which uses Lomb-Scargle periodograms at its core, no statistically significant signal has been found. The model used for the Bayesian analysis has been adjusted to accommodate multiple deterministic systematics that may be present in the data. A statistically significant signal has been found in the dataset of multiple pulsars with common frequencies between 10-8 and 2 x 10-8 Hz, which can most likely be explained by the residual Faraday rotation in the terrestrial ionosphere. Strong bounds on the coupling constant ga gamma, in the same ballpark as other searches, have been obtained in the mass range between 6 x 10-24 and 5 x 10-21 eV. We conclude by discussing the problems that can limit the sensitivity of our search for ultralight axions in the polarimetry data of pulsars, and possible ways to resolve them.

Context. Radio pulsars can be used for many studies, including the investigation of the ionized interstellar medium and the solar wind via their dispersive effects. These phenomena affect the high-precision timing of pulsars and are among the main sources of noise in experiments searching for low-frequency gravitational waves in pulsar data. Aims. In this paper, we compare the functionality and reliability of three commonly used schemes to measure temporal variations in interstellar propagation effects in pulsar timing data. Methods. We carried out extensive simulations at low observing frequencies (100-200 MHz) by injecting long-term correlated noise processes with power-law spectra and white noise, to evaluate the robustness, accuracy, and precision of the following three mitigation methods: epoch-wise (EW) measurements of interstellar dispersion; the DMX method of simultaneous, piece-wise fits to interstellar dispersion; and DM GP, which models dispersion variations through Gaussian processes using a Bayesian analysis method. We then evaluated how reliably the input signals were reconstructed and how the various methods reacted to the presence of achromatic long-period noise. Results. All the methods perform well, provided the achromatic long-period noise is modeled for DMX and DM GP. The most precise method is DM GP, followed by DMX and EW, while the most accurate is EW, followed by DMX and DM GP. We also tested different scenarios including simulations of L-band times of arrival and realistic DM injection, with no significant variation in the obtained results. Conclusions. Given the nature of our simulations and our scope, we deem that EW is the most reliable method to study the Galactic ionized media. Follow-up works should be conducted to confirm this result via more realistic simulations. We note that DM GP and DMX seem to be the best-performing techniques in removing long-term correlated noise, and hence for gravitational wave studies. However, full simulations of pulsar timing array experiments are needed to support this interpretation.

The European Pulsar Timing Array (EPTA) and Indian Pulsar Timing Array (InPTA) collaborations have measured a low-frequency common signal in the combination of their second and first data releases respectively, with the correlation properties of a gravitational wave background (GWB). Such signal may have its origin in a number of physical processes including a cosmic population of inspiralling supermassive black hole binaries (SMBHBs); inflation, phase transitions, cosmic strings and tensor mode generation by non-linear evolution of scalar perturbations in the early Universe; oscillations of the Galactic potential in the presence of ultra-light dark matter (ULDM). At the current stage of emerging evidence, it is impossible to discriminate among the different origins. Therefore, in this paper, we consider each process separately, and investigate the implications of the signal under the hypothesis that it is generated by that specific process. We find that the signal is consistent with a cosmic population of inspiralling SMBHBs, and its relatively high amplitude can be used to place constraints on binary merger timescales and the SMBH-host galaxy scaling relations. If this origin is confirmed, this is the first direct evidence that SMBHBs merge in nature, adding an important observational piece to the puzzle of structure formation and galaxy evolution. As for early Universe processes, the measurement would place tight constraints on the cosmic string tension and on the level of turbulence developed by first-order phase transitions. Other processes would require non-standard scenarios, such as a blue-tilted inflationary spectrum or an excess in the primordial spectrum of scalar perturbations at large wavenumbers. Finally, a ULDM origin of the detected signal is disfavoured, which leads to direct constraints on the abundance of ULDM in our Galaxy.

Context. High-precision pulsar timing is highly dependent on the precise and accurate modelling of any effects that can potentially impact the data. In particular, effects that contain stochastic elements contribute to some level of corruption and complexity in the analysis of pulsar-timing data. It has been shown that commonly used solar wind models do not accurately account for variability in the amplitude of the solar wind on both short and long timescales. Aims. In this study, we test and validate a new, cutting-edge solar wind modelling method included in the enterprise software suite (widely used for pulsar noise analysis) through extended simulations. We use it to investigate temporal variability in LOFAR data. Our model testing scheme in itself provides an invaluable asset for pulsar timing array (PTA) experiments. Since, improperly accounting for the solar wind signature in pulsar data can induce false-positive signals, it is of fundamental importance to include in any such investigations. Methods. We employed a Bayesian approach utilising a continuously varying Gaussian process to model the solar wind. It uses a spherical approximation that modulates the electron density. This method, which we refer to as a solar wind Gaussian process (SWGP), has been integrated into existing noise analysis software, specifically enterprise. Our Validation of this model was performed through simulations. We then conduct noise analysis on eight pulsars from the LOFAR dataset, with most pulsars having a time span of similar to 11 years encompassing one full solar activity cycle. Furthermore, we derived the electron densities from the dispersion measure values obtained by the SWGP model. Results. Our analysis reveals a strong correlation between the electron density at 1 AU and the ecliptic latitude (ELAT) of the pulsar. Pulsars with |ELAT|< 3 degrees exhibit significantly higher average electron densities. Furthermore, we observed distinct temporal patterns in the electron densities in different pulsars. In particular, pulsars within |ELAT|< 3 degrees exhibit similar temporal variations, while the electron densities of those outside this range correlate with the solar activity cycle. Notably, some pulsars exhibit sensitivity to the solar wind up to 45 degrees away from the Sun in LOFAR data. Conclusions. The continuous variability in electron density offered in this model represents a substantial improvement over previous models, that assume a single value for piece-wise bins of time. This advancement holds promise for solar wind modelling in future International Pulsar Timing Array (IPTA) data combinations.

We present the results of a search for continuous gravitational wave signals (CGWs) in the second data release (DR2) of the European Pulsar Timing Array (EPTA) Collaboration. The most significant candidate event from this search has a gravitational wave frequency of 4-5 nHz. Such a signal could be generated by a supermassive black hole binary (SMBHB) in the local Universe. We present the results of a follow-up analysis of this candidate using both Bayesian and frequentist methods. The Bayesian analysis gives a Bayes factor of 4 in favour of the presence of the CGW over a common uncorrelated noise process. In contrast, the frequentist analysis estimates the p-value of the candidate to be < 1%, also assuming the presence of common uncorrelated red noise. However, comparing a model that includes both a CGW and a gravitational wave background (GWB) to a GWB only, the Bayes factor in favour of the CGW model is only 0.7. Therefore, we cannot conclusively determine the origin of the observed feature, nor can we rule it out as a CGW source. We present results of simulations that demonstrate that data containing a weak gravitational wave background can be misinterpreted as data including a CGW and vice versa, providing two plausible explanations for the EPTA DR2 data. Further investigations combining data from all PTA collaborations will be needed to reveal the true origin of this feature.

Radio pulsars allow the study of the ionised interstellar medium and its dispersive effects, a major noise source in gravitational wave searches using pulsars. In this paper, we compare the functionality and reliability of three commonly used schemes to measure temporal variations in interstellar propagation effects in pulsar-timing data. We carry out extensive simulations at low observing frequencies (100-200 MHz) by injecting long-term correlated noise processes with power-law spectra and white noise, to evaluate the robustness, accuracy and precision of the following three mitigation methods: epoch-wise (EW) measurements of interstellar dispersion; the DMX method of simultaneous, piece-wise fits to interstellar dispersion; and DMGP, which models dispersion variations through Gaussian processes using a Bayesian analysis method. We then evaluate how reliably the input signals are reconstructed and how the various methods react to the presence of achromatic long-period noise. All the methods perform well, provided the achromatic long-period noise is modeled for DMX and DMGP. The most precise method is DMGP, followed by DMX and EW, while the most accurate is EW, followed by DMX and DMGP. We also test different scenarios including simulations of L-band ToAs and realistic DM injection, with no significant variation in the obtained results. Given the nature of our simulations and our scope, we deem that EW is the most reliable method to study the Galactic ionized media. Future works should be conducted to confirm this result via more realistic simulations. We note that DM GP and DMX seem to be the most performing techniques in removing long-term correlated noise, and hence for gravitational wave studies. However, full simulations of pulsar timing array experiments are needed to support this interpretation.

The Australian, Chinese, European, Indian, and North American pulsar timing array (PTA) collaborations recently reported, at varying levels, evidence for the presence of a nanohertz gravitational wave background (GWB). Given that each PTA made different choices in modeling their data, we perform a comparison of the GWB and individual pulsar noise parameters across the results reported from the PTAs that constitute the International Pulsar Timing Array (IPTA). We show that despite making different modeling choices, there is no significant difference in the GWB parameters that are measured by the different PTAs, agreeing within $1\sigma$. The pulsar noise parameters are also consistent between different PTAs for the majority of the pulsars included in these analyses. We bridge the differences in modeling choices by adopting a standardized noise model for all pulsars and PTAs, finding that under this model there is a reduction in the tension in the pulsar noise parameters. As part of this reanalysis, we "extended" each PTA's data set by adding extra pulsars that were not timed by that PTA. Under these extensions, we find better constraints on the GWB amplitude and a higher signal-to-noise ratio for the Hellings and Downs correlations. These extensions serve as a prelude to the benefits offered by a full combination of data across all pulsars in the IPTA, i.e., the IPTA's Data Release 3, which will involve not just adding in additional pulsars, but also including data from all three PTAs where any given pulsar is timed by more than as single PTA.

Pulsar Timing Array experiments probe the presence of possible scalar or pseudoscalar ultralight dark matter particles through decade-long timing of an ensemble of galactic millisecond radio pulsars. With the second data release of the European Pulsar Timing Array, we focus on the most robust scenario, in which dark matter interacts only gravitationally with ordinary baryonic matter. Our results show that ultralight particles with masses 10^{-24.0}  eV≲m≲10^{-23.3}  eV cannot constitute 100% of the measured local dark matter density, but can have at most local density ρ≲0.3  GeV/cm^{3}.

We present the results of the search for an isotropic stochastic gravitational wave background (GWB) at nanohertz frequencies using the second data release of the European Pulsar Timing Array (EPTA) for 25 millisecond pulsars and a combination with the first data release of the Indian Pulsar Timing Array (InPTA). We analysed (i) the full 24.7-year EPTA data set, (ii) its 10.3-year subset based on modern observing systems, (iii) the combination of the full data set with the first data release of the InPTA for ten commonly timed millisecond pulsars, and (iv) the combination of the 10.3-year subset with the InPTA data. These combinations allowed us to probe the contributions of instrumental noise and interstellar propagation effects. With the full data set, we find marginal evidence for a GWB, with a Bayes factor of four and a false alarm probability of $4\%$. With the 10.3-year subset, we report evidence for a GWB, with a Bayes factor of $60$ and a false alarm probability of about $0.1\%$ ($\gtrsim 3\sigma$ significance). The addition of the InPTA data yields results that are broadly consistent with the EPTA-only data sets, with the benefit of better noise modelling. Analyses were performed with different data processing pipelines to test the consistency of the results from independent software packages. The inferred spectrum from the latest EPTA data from new generation observing systems is rather uncertain and in mild tension with the common signal measured in the full data set. However, if the spectral index is fixed at 13/3, the two data sets give a similar amplitude of ($2.5\pm0.7)\times10^{-15}$ at a reference frequency of $1\,{\rm yr}^{-1}$. By continuing our detection efforts as part of the International Pulsar Timing Array (IPTA), we expect to be able to improve the measurement of spatial correlations and better characterise this signal in the coming years.

We search for a stochastic gravitational wave background (SGWB) generated by a network of cosmic strings using six millisecond pulsars from Data Release 2 (DR2) of the European Pulsar Timing Array (EPTA). We perform a Bayesian analysis considering two models for the network of cosmic string loops, and compare it to a simple power-law model which is expected from the population of supermassive black hole binaries. Our main strong assumption is that the previously reported common red noise process is a SGWB. We find that the one-parameter cosmic string model is slightly favored over a power-law model thanks to its simplicity. If we assume a two-component stochastic signal in the data (supermassive black hole binary population and the signal from cosmic strings), we get a $95\%$ upper limit on the string tension of $\log_{10}(G\mu)<-9.9$ ($-10.5$) for the two cosmic string models we consider. In extended two-parameter string models, we were unable to constrain the number of kinks. We test two approximate and fast Bayesian data analysis methods against the most rigorous analysis and find consistent results. These two fast and efficient methods are applicable to all SGWBs, independent of their source, and will be crucial for analysis of extended data sets.

Pulsar timing arrays offer a probe of the low-frequency gravitational wave spectrum (1 - 100 nanohertz), which is intimately connected to a number of markers that can uniquely trace the formation and evolution of the Universe. We present the dataset and the results of the timing analysis from the second data release of the European Pulsar Timing Array (EPTA). The dataset contains high-precision pulsar timing data from 25 millisecond pulsars collected with the five largest radio telescopes in Europe, as well as the Large European Array for Pulsars. The dataset forms the foundation for the search for gravitational waves by the EPTA, presented in associated papers. We describe the dataset and present the results of the frequentist and Bayesian pulsar timing analysis for individual millisecond pulsars that have been observed over the last 25 years. We discuss the improvements to the individual pulsar parameter estimates, as well as new measurements of the physical properties of these pulsars and their companions. This data release extends the dataset from EPTA Data Release 1 up to the beginning of 2021, with individual pulsar datasets with timespans ranging from 14 to 25 years. These lead to improved constraints on annual parallaxes, secular variation of the orbital period, and Shapiro delay for a number of sources. Based on these results, we derived astrophysical parameters that include distances, transverse velocities, binary pulsar masses, and annual orbital parallaxes.

The nanohertz gravitational wave background (GWB) is expected to be an aggregate signal of an ensemble of gravitational waves emitted predominantly by a large population of coalescing supermassive black hole binaries in the centres of merging galaxies. Pulsar timing arrays, ensembles of extremely stable pulsars, are the most precise experiments capable of detecting this background. However, the subtle imprints that the GWB induces on pulsar timing data are obscured by many sources of noise. These must be carefully characterized to increase the sensitivity to the GWB. In this paper, we present a novel technique to estimate the optimal number of frequency coefficients for modelling achromatic and chromatic noise and perform model selection. We also incorporate a new model to fit for scattering variations in the pulsar timing package temponest and created realistic simulations of the European Pulsar Timing Array (EPTA) datasets that allowed us to test the efficacy of our noise modelling algorithms. We present an in-depth analysis of the noise properties of 25 millisecond pulsars (MSPs) that form the second data release (DR2) of the EPTA and investigate the effect of incorporating low-frequency data from the Indian PTA collaboration. We use enterprise and temponest packages to compare noise models with those reported with the EPTA DR1. We find that, while in some pulsars we can successfully disentangle chromatic from achromatic noise owing to the wider frequency coverage in DR2, in others the noise models evolve in a more complicated way. We also find evidence of long-term scattering variations in PSR J1600$-$3053. Through our simulations, we identify intrinsic biases in our current noise analysis techniques and discuss their effect on GWB searches. The results presented here directly help improve sensitivity to the GWB and are already being used as part of global PTA efforts.