A short term performance assessment methodology under development and validation at the In Salah CO2 storage site is presented. The progressive approach first concludes of the necessity to consider a dual media reservoir system at Krechba to fit with gas reservoir production, CO2 injection and CO2 breakthrough at an old appraisal well (Kb-5). To improve gas migration prediction while also considering the geomechanical behavior of the site, an extended geomodel has been developed. Fluid pressure simulation results representative of the dual media reservoir model and of the simple medium upper layer ones (up to the water table) are used to initiate the geomechanical modeling. Comparison of the preliminary geomechanical simulation results assuming a poro-elastic behavior and InSAR satellite surface displacement data are coherent and in the same order of magnitude (∼20 millimeters at maximum displacement).

Summary This paper presents an integrated workflow for the interpretation of 4D seismic data to monitor steam chamber growth during the steam-assisted gravity drainage recovery process (SAGD). Superimposed on reservoir heterogeneities of geological origin, many factors interact during thermal production of heavy oil and bitumen reservoirs, which complicate the interpretation of 4D seismic data: changes in oil viscosity, fluid saturations, pore pressure, and so on. The workflow is based on the generation of a geological model inspired by a real field case of the McMurray formation in the Athabasca region. The approach consists of three steps: the construction of an initial static model, the simulation of thermal production of heavy oil with two coupled fluid-flow and geomechanical models and the production of synthetic seismic maps at different stages of steam injection. The distribution of geological facies is simulated on a fine grid using a geostatistical approach, which honours all available well data. The reservoir's geomechanical and elastic properties are characterized by logs and literature at an initial stage before the start of production. Production scenarios are run to obtain pore pressure, temperature, steam and oil saturations on a detailed reservoir grid around a well pair at several stages of production. Direct coupling with a geomechanical model produces volumetric strain and mean effective stress maps as additional properties. These physical parameters are used to compute new seismic velocities and density for each stage of production according to Hertz and Gassmann formulas. Reflectivity is then computed, and a new synthetic seismic image of the reservoir is generated for each stage of production. The impacts of heterogeneities, production conditions and reservoir properties are evaluated for several simulation scenarios from the beginning of steam injection to 3 years of production. Results show that short-term seismic monitoring can help in anticipating early changes in steam injection strategy. In return, long-term periods allow the behaviour of the steam chamber to be monitored laterally and in the upper part of the reservoir. This study demonstrates the added value of 4D seismic data in the context of steam-assisted heavy oil production.