This paper presents the characterisation and testing of the first wafer-scale monolithic stitched sensor (MOSS) prototype developed for the ALICE ITS3 upgrade that is to be installed during the LHC Long Shutdown 3 (2026-2030). The MOSS chip design is driven by the truly cylindrical detector geometry that imposes that each layer is built out of two wafer-sized, bent silicon chips. The stitching technique is employed to fabricate sensors with dimensions of 1.4 cm x 25.9 cm, thinned to 50 mu m. The chip architecture, the in-pixel front-end, the laboratory and in-beam characterisation, the susceptibility to single-event effects, and the series testing are discussed. The testing campaign validates the design of a wafer-scale stitched sensor and the performance of the pixel matrix to be within the ITS3 requirements. The MOSS chip demonstrates the feasibility of the ITS3 detector concept and provides insights for further optimisation and development.
Monolithic Active Pixel Sensors (MAPS) in advanced CMOS imaging technologies are key to next-generation tracking systems for high-energy physics, where radiation hardness and precise vertex reconstruction are essential. As part of the ALICE ITS3 R&D program in synergy with the CERN R&D, we evaluated the performance of the Analog Pixel Test Structures (APTS) fabricated in the TPSCo 65 nm CMOS imaging process. The prototypes employ 10 & micro;m pitch pixels with a fast operational amplifier-based buffering stage at the output, enabling direct characterization of intrinsic sensor response. Beam tests with minimum ionizing particles assessed the timing and charge collection of DC- and AC-coupled designs, including devices exposed to 10(14) 1 MeV n(eq)/cm(2) and 10(15) 1 MeV n(eq)/cm(2) non-ionizing energy loss. DC-coupled sensors demonstrated stable performance, maintaining time resolution lower than 70 ps and > 99% detection efficiency up to 10(15) 1 MeV n(eq)/cm(2). AC-coupled sensors demonstrated a wide operational margin, with efficiencies above 99% for clusterization thresholds below 150 e(-). Even though the AC coupling allows higher reverse bias than DC-coupled sensors, the reduced signal amplitude lowers the signal-to-noise ratio, increasing the jitter contribution. At high reverse bias, the AC-coupled sensors achieve time resolutions comparable to the DC-coupled version, demonstrating the viability of both approaches. These results also suggest that combining the low capacitance of DC-coupled designs with the high-bias capability of AC coupling could further enhance time resolution. These results confirm the suitability of 65 nm MAPS for future collider detectors requiring high radiation tolerance, efficiency, and timing precision.
Bent monolithic active pixel sensors are the basis for the planned fully cylindrical ultra low material budget tracking detector ITS3 of the ALICE experiment. This paper presents results from testbeam campaigns using high-energy particles to verify the performance of 50 mu m thick bent ALPIDE chips in terms of efficiency and spatial resolution. The sensors were bent to radii of 18, 24 and 30 mm, slightly smaller than the foreseen bending radii of the future ALICE ITS3 layers. An efficiency larger than 99.9% and a spatial resolution of approximately 5 mu m, in line with the nominal operation of flat ALPIDE sensors, is obtained at nominal operating conditions. These values are found to be independent of the bending radius and thus constitute an additional milestone in the demonstration of the feasibility of the planned ITS3 detector. In addition, a special geometry in which the beam particles graze the chip and traverse it laterally over distances of up to 3 mm is investigated.
The next generation of MAPS for future tracking detectors will have to meet stringent requirements placed on them. One such detector is the ALICE ITS3 that aims to be very light at 0.07 % X/X-0 per layer and have a low power consumption in the active area of 40 mW/cm(2) by implementing wafer-scale MAPS bent into cylindrical half layers. To address these challenging requirements, the ALICE ITS3 project, in conjunction with the CERN EP R&D on monolithic pixel sensors, proposed the Tower Partners Semiconductor Co. 65 nm CMOS process as the starting point for the sensor. After the initial results confirmed the detection efficiency and radiation hardness, the choice of the technology was solidified by demonstrating the feasibility of operating MAPS in low-power consumption regimes, < 50 mW/cm(2), while maintaining high-quality performance. This was shown through a detailed characterisation of the Digital Pixel Test Structure (DPTS) prototype exposed to X-rays and ionising beams, and the results are presented in this article. Additionally, the sensor was further investigated through studies of the fake-hit rate, the linearity of the front-end in the range 1.7-28 keV, the performance after ionising irradiation, and the detection efficiency of inclined tracks in the range 0-45(degrees).
In the context of the CERN EP R&D on monolithic sensors and the ALICE ITS3 upgrade, the Tower Partners Semiconductor Co (TPSCo) 65 nm process has been qualified for use in high energy physics, and adopted for the ALICE ITS3 upgrade. An Analog Pixel Test Structure (APTS) featuring fast per pixel operational-amplifier-based buffering for a small matrix of four by four pixels, with a sensor with a small collection electrode and a very non-uniform electric field, was designed to allow detailed characterization of the pixel performance in this technology. Several variants of this chip with different pixel designs have been characterized with a 120GeV/c positive hadron beam. This result indicates that the APTS-OA prototype variants with the best performance achieve a time resolution of 63 ps with a detection efficiency exceeding 99% and a spatial resolution of 2 mu m, highlighting the potential of TPSCo 65 nm CMOS imaging technology for high-energy physics and other fields requiring precise time measurement, high detection efficiency, and excellent spatial resolution.
The production yields of antideuterons and antiprotons are measured in pp collisions at a center-of-mass energy of root s = 13 TeV, as a function of transverse momentum (p(T)) and rapidity (y), for the first time rapidity-differentially up to vertical bar y vertical bar = 0.7. The measured spectra are used to study the p(T) and rapidity dependence of the coalescence parameter B-2, which quantifies the coalescence probability of antideuterons. The p(T) and rapidity dependence of the obtained B-2 is extrapolated for p(T) > 1.7 GeV/c and vertical bar y vertical bar > 0.7 using the phenomenological antideuteron production model implemented in PYTHIA 8.3 as well as a baryon coalescence afterburner model based on EPOS 3. Such measurements are of interest to the astrophysics community, since they can be used for the calculation of the flux of antinuclei from cosmic rays, in combination with coalescence models.
The first measurement of HΛ3 and H‾Λ‾3 differential production with respect to transverse momentum and centrality in Pb–Pb collisions at sNN=5.02 TeV is presented. The HΛ3 has been reconstructed via its two-charged-body decay channel, i.e., HΛ3→3He+π−. A Blast-Wave model fit of the pT-differential spectra of all nuclear species measured by the ALICE collaboration suggests that the HΛ3 kinetic freeze-out surface is consistent with that of other nuclei. The ratio between the integrated yields of HΛ3 and He3 is compared to predictions from the statistical hadronisation model and the coalescence model, with the latter being favoured by the presented measurements.
Abstract The azimuthal anisotropy of particles associated with jets (jet particles) at midrapidity is measured for the first time in p-Pb and Pb-Pb collisions at $$ \sqrt{{\textrm{s}}_{\textrm{NN}}} $$ s NN = 5.02 TeV down to transverse momentum (pT) of 0.5 GeV/c and 2 GeV/c, respectively, with ALICE. The results obtained in p-Pb collisions are based on a novel three-particle correlation technique. The azimuthal anisotropy coefficient v2 in high-multiplicity p-Pb collisions is positive, with a significance reaching 6.8σ at low pT, and its magnitude is smaller than in semicentral Pb-Pb collisions. In contrast to the measurements in Pb-Pb collisions, the v2 coefficient is also found independent of pT within uncertainties. Comparisons with the inclusive charged-particle v2 and with AMPT calculations are discussed. The predictions suggest that parton interactions play an important role in generating a non-zero jet-particle v2 in p-Pb collisions, even though they overestimate the reported measurement. These observations shed new insights on the understanding of the origin of the collective behaviour of jet particles in small systems such as p-Pb collisions, and provide significant stringent new constraints to models.
The inclusive production of the charm-strange baryon Ωc0 is measured for the first time via its semileptonic decay into Ω−e+νe at midrapidity (|y|<0.8) in proton-proton (pp) collisions at the center-of-mass energy s=13 TeV with the ALICE detector at the LHC. The transverse momentum (pT) differential cross section multiplied by the branching ratio is presented in the interval 2<pT<12 GeV/c. The branching-fraction ratio BR(Ωc0→Ω−e+νe)/BR(Ωc0→Ω−π+) is measured to be 1.12±0.22 (stat) ±0.27 (syst). Comparisons with other experimental measurements, as well as with theoretical calculations, are presented. © 2024 CERN, for the ALICE Collaboration 2024 CERN
The two-particle momentum correlation functions between charm mesons (D*± and D±) and charged light-flavor mesons (π± and K±) in all charge combinations are measured for the first time by the ALICE Collaboration in high-multiplicity proton–proton collisions at a center-of-mass energy of s=13 TeV. For DK and D*K pairs, the experimental results are in agreement with theoretical predictions of the residual strong interaction based on quantum chromodynamics calculations on the lattice and chiral effective field theory. In the case of Dπ and D*π pairs, tension between the calculations including strong interactions and the measurement is observed. For all particle pairs, the data can be adequately described by Coulomb interaction only, indicating a shallow interaction between charm and light-flavor mesons. Finally, the scattering lengths governing the residual strong interaction of the Dπ and D*π systems are determined by fitting the experimental correlation functions with a model that employs a Gaussian potential. The extracted values are small and compatible with zero. © 2024 CERN, for the ALICE Collaboration 2024 CERN
A Large Ion Collider Experiment (ALICE) has been conceived and constructed as a heavy-ion experiment at the LHC. During LHC Runs 1 and 2, it has produced a wide range of physics results using all collision systems available at the LHC. In order to best exploit new physics opportunities opening up with the upgraded LHC and new detector technologies, the experiment has undergone a major upgrade during the LHC Long Shutdown 2 (2019–2022). This comprises the move to continuous readout, the complete overhaul of core detectors, as well as a new online event processing farm with a redesigned online-offline software framework. These improvements will allow to record Pb-Pb collisions at rates up to 50 kHz, while ensuring sensitivity for signals without a triggerable signature.
Analogue test structures were fabricated using the Tower Partners Semiconductor Co. CMOS 65 nm ISC process. The purpose was to characterize and qualify this process and to optimize the sensor for the next generation of Monolithic Active Pixels Sensors for high-energy physics. The technology was explored in several variants which differed by: doping levels, pixel geometries and pixel pitches (10-25 mu m). These variants have been tested following exposure to varying levels of irradiation up to 3 MGy and 10(16) 1 MeV n(eq) cm(-2). Here the results from prototypes that feature direct analogue output of a 4 x 4 pixel matrix are reported, allowing the systematic and detailed study of charge collection properties. Measurements were taken both using Fe-55 X-ray sources and in beam tests using minimum ionizing particles. The results not only demonstrate the feasibility of using this technology for particle detection but also serve as a reference for future applications and optimizations.
Recent measurements of charm-baryon production in hadronic collisions have questioned the universality of charm-quark fragmentation across different collision systems. In this work the fragmentation of charm quarks into charm baryons is probed, by presenting the first measurement of the longitudinal jet momentum fraction carried by Λc+ baryons, z∥ch, in hadronic collisions. The results are obtained in proton-proton (pp) collisions at s=13 TeV at the LHC, with Λc+ baryons and charged (track-based) jets reconstructed in the transverse momentum intervals of 3≤pTΛc+<15 GeV/c and 7≤pTjet ch<15 GeV/c, respectively. The z∥ch distribution is compared to a measurement of D0-tagged charged jets in pp collisions as well as to 8 simulations. The data hints that the fragmentation of charm quarks into charm baryons is softer with respect to charm mesons, in the measured kinematic interval, as predicted by hadronization models which include color correlations beyond leading-color in the string formation. © 2024 CERN, for the ALICE Collaboration 2024 CERN
Abstract The total charm-quark production cross section per unit of rapidity $$\textrm{d}\sigma ({{\textrm{c}}\overline{\textrm{c}}})/\textrm{d}y$$ d σ ( c c ¯ ) / d y , and the fragmentation fractions of charm quarks to different charm-hadron species $$f(\textrm{c}\rightarrow {\textrm{h}}_{\textrm{c}})$$ f ( c → h c ) , are measured for the first time in p–Pb collisions at $$\sqrt{s_\textrm{NN}} = 5.02~\text {Te}\hspace{-1.00006pt}\textrm{V} $$ s NN = 5.02 Te V at midrapidity ( $$-0.96 - 0.96 < y < 0.04 in the centre-of-mass frame) using data collected by ALICE at the CERN LHC. The results are obtained based on all the available measurements of prompt production of ground-state charm-hadron species: $$\textrm{D}^{0}$$ D 0 , $$\textrm{D}^{+}$$ D + , $$\textrm{D}_\textrm{s}^{+}$$ D s + , and $$\mathrm {J/\psi }$$ J / ψ mesons, and $$\Lambda _\textrm{c}^{+}$$ Λ c + and $$\Xi _\textrm{c}^{0}$$ Ξ c 0 baryons. The resulting cross section is $$ \textrm{d}\sigma ({{\textrm{c}}\overline{\textrm{c}}})/\textrm{d}y =219.6 \pm 6.3\;(\mathrm {stat.}) {\;}_{-11.8}^{+10.5}\;(\mathrm {syst.}) {\;}_{-2.9}^{+8.3}\;(\mathrm {extr.})\pm 5.4\;(\textrm{BR})\pm 4.6\;(\mathrm {lumi.}) \pm 19.5\;(\text {rapidity shape})+15.0\;(\Omega _\textrm{c}^{0})\;\textrm{mb} $$ d σ ( c c ¯ ) / d y = 219.6 ± 6.3 ( stat . ) - 11.8 + 10.5 ( syst . ) - 2.9 + 8.3 ( extr . ) ± 5.4 ( BR ) ± 4.6 ( lumi . ) ± 19.5 ( rapidity shape ) + 15.0 ( Ω c 0 ) mb , which is consistent with a binary scaling of pQCD calculations from pp collisions. The measured fragmentation fractions are compatible with those measured in pp collisions at $$\sqrt{s} = 5.02$$ s = 5.02 and 13 TeV, showing an increase in the relative production rates of charm baryons with respect to charm mesons in pp and p–Pb collisions compared with $$\mathrm {e^{+}e^{-}}$$ e + e - and $$\mathrm {e^{-}p}$$ e - p collisions. The $$p_\textrm{T}$$ p T -integrated nuclear modification factor of charm quarks, $$R_\textrm{pPb}({\textrm{c}}\overline{\textrm{c}})= 0.91 \pm 0.04\;\mathrm{(stat.)} ^{+0.08}_{-0.09}\;\mathrm{(syst.)} ^{+0.05}_{-0.03}\;\mathrm{(extr.)} \pm 0.03\;\mathrm{(lumi.)}$$ R pPb ( c c ¯ ) = 0.91 ± 0.04 ( stat . ) - 0.09 + 0.08 ( syst . ) - 0.03 + 0.05 ( extr . ) ± 0.03 ( lumi . ) , is found to be consistent with unity and with theoretical predictions including nuclear modifications of the parton distribution functions.
Collective behavior has been observed in high-energy heavy-ion collisions for several decades. Collectivity is driven by the high particle multiplicities that are produced in these collisions. At the CERN Large Hadron Collider (LHC), features of collectivity have also been seen in high-multiplicity proton-proton collisions that can attain particle multiplicities comparable to peripheral Pb-Pb collisions. One of the possible signatures of collective behavior is the decrease of femtoscopic radii extracted from pion and kaon pairs emitted from highmultiplicity collisions with increasing pair transverse momentum. This decrease can be described in terms of an approximate transverse mass scaling. In the present work, femtoscopic analyses are carried out by the ALICE Collaboration on charged pion and kaon pairs produced in pp collisions at root s = 13 TeV from the LHC to study possible collectivity in pp collisions. The event-shape analysis method based on transverse sphericity is used to select for spherical versus jetlike events, and the effects of this selection on the femtoscopic radii for both charged pion and kaon pairs are studied. This is the first time this selection method has been applied to charged kaon pairs. An approximate transverse-mass scaling of the radii is found in all multiplicity ranges studied when the difference in the Lorentz boost for pions and kaons is taken into account. This observation does not support the hypothesis of collective expansion of hot and dense matter that should only occur in high-multiplicity events. A possible alternate explanation of the present results is based on a scenario of common emission conditions for pions and kaons in pp collisions for the multiplicity ranges studied.
Long- and short-range correlations for pairs of charged particles are studied via two-particle angular correlations in pp collisions at √(s) = 13 TeV and p–Pb collisions at √(s_NN) = 5.02 TeV. The correlation functions are measured as a function of relative azimuthal angle ∆φ and pseudorapidity separation ∆η for pairs of primary charged particles within the pseudorapidity interval |η| < 0.9 and the transverse-momentum interval 1 < pT < 4 GeV/c. Flow coefficients are extracted for the long-range correlations (1.6 < |∆η| < 1.8) in various high-multiplicity event classes using the low-multiplicity template fit method. The method is used to subtract the enhanced yield of away-side jet fragments in high-multiplicity events. These results show decreasing flow signals toward lower multiplicity events. Furthermore, the flow coefficients for events with hard probes, such as jets or leading particles, do not exhibit any significant changes compared to those obtained from high-multiplicity events without any specific event selection criteria. The results are compared with hydrodynamic-model calculations, and it is found that a better understanding of the initial conditions is necessary to describe the results, particularly for low-multiplicity events.
The inclusive production of the charm-strange baryon Omega(0)(c) is measured for the first time via its semileptonic decay into Omega(-)e(+)nu(e) at midrapidity (vertical bar y vertical bar < 0.8) in proton-proton (pp) collisions at the center-of-mass energy root s =13 TeV with the ALICE detector at the LHC. The transverse momentum (pT) differential cross section multiplied by the branching ratio is presented in the interval 2 < p(T) < 12 GeV=c. The branching-fraction ratio BR(Omega(0)(c) -> Omega(-)e(+)nu(e))/BR(Omega(0)(c) -> Omega(-)pi(+)) is measured to be 1.12 +/- 0.22 (stat) +/- 0.27 (syst). Comparisons with other experimental measurements, as well as with theoretical calculations, are presented.
Measurements of the pT-dependent flow vector fluctuations in Pb–Pb collisions at sNN=5.02TeV using azimuthal correlations with the ALICE experiment at the Large Hadron Collider are presented. A four-particle correlation approach [ALICE Collaboration, ] is used to quantify the effects of flow angle and magnitude fluctuations separately. This paper extends previous studies to additional centrality intervals and provides measurements of the pT-dependent flow vector fluctuations at sNN=5.02TeV with two-particle correlations. Significant pT-dependent fluctuations of the V⃗2 flow vector in Pb–Pb collisions are found across different centrality ranges, with the largest fluctuations of up to ∼15% being present in the 5% most central collisions. In parallel, no evidence of significant pT-dependent fluctuations of V⃗3 or V⃗4 is found. Additionally, evidence of flow angle and magnitude fluctuations is observed with more than 5σ significance in central collisions. These observations in Pb–Pb collisions indicate where the classical picture of hydrodynamic modeling with a common symmetry plane breaks down. This has implications for hard probes at high pT, which might be biased by pT-dependent flow angle fluctuations of at least 23% in central collisions. Given the presented results, existing theoretical models should be reexamined to improve our understanding of initial conditions, quark–gluon plasma properties, and the dynamic evolution of the created system. ©2024 CERN, for the ALICE Collaboration 2024 CERN
The ALICE Collaboration reports the measurement of semi-inclusive distributions of charged-particle jets recoiling from a high transverse momentum (high p_{T}) hadron trigger in proton-proton and central Pb-Pb collisions at sqrt[s_{NN}]=5.02 TeV. A data-driven statistical method is used to mitigate the large uncorrelated background in central Pb-Pb collisions. Recoil jet distributions are reported for jet resolution parameter R=0.2, 0.4, and 0.5 in the range 7<p_{T,jet}<140 GeV/c and trigger-recoil jet azimuthal separation π/2<Δφ<π. The measurements exhibit a marked medium-induced jet yield enhancement at low p_{T} and at large azimuthal deviation from Δφ∼π. The enhancement is characterized by its dependence on Δφ, which has a slope that differs from zero by 4.7σ. Comparisons to model calculations incorporating different formulations of jet quenching are reported. These comparisons indicate that the observed yield enhancement arises from the response of the QGP medium to jet propagation.
AbstractThe first measurement of the multiplicity dependence of intra-jet properties of leading charged-particle jets in proton–proton (pp) collisions is reported. The mean charged-particle multiplicity and jet fragmentation distributions are measured in minimum-bias and high-multiplicity pp collisions at center-of-mass energy $$\sqrt{s}$$ s = 13 TeV using the ALICE detector. Jets are reconstructed from charged particles produced in the midrapidity region ($$|\eta | < 0.9$$ | η | < 0.9 ) using the sequential recombination anti-$$k_{\textrm{T}}$$ k T algorithm with jet resolution parameters R = 0.2, 0.3, and 0.4 for the transverse momentum ($$p_\textrm{T}$$ p T ) interval 5–110 GeV/c. The high-multiplicity events are selected by the forward V0 scintillator detectors. The mean charged-particle multiplicity inside the leading jet cone rises monotonically with increasing jet $$p_\textrm{T}$$ p T in qualitative agreement with previous measurements at lower energies. The distributions of jet fragmentation function variables $$z^{\textrm{ch}}$$ z ch and $$\xi ^{\textrm{ch}}$$ ξ ch are measured for different jet-$$p_\textrm{T}$$ p T intervals. Jet-$$p_\textrm{T}$$ p T independent fragmentation of leading jets is observed for wider jets except at high- and low-$$z^{\textrm{ch}}$$ z ch values. The observed “hump-backed plateau” structure in the $$\xi ^{\textrm{ch}}$$ ξ ch distribution indicates suppression of low-$$p_\textrm{T}$$ p T particles. In high-multiplicity events, an enhancement of the fragmentation probability of low-$$z^{\textrm{ch}}$$ z ch particles accompanied by a suppression of high-$$z^{\textrm{ch}}$$ z ch particles is observed compared to minimum-bias events. This behavior becomes more prominent for low-$$p_\textrm{T}$$ p T jets with larger jet radius. The results are compared with predictions of QCD-inspired event generators, PYTHIA 8 with Monash 2013 tune and EPOS LHC. It is found that PYTHIA 8 qualitatively reproduces the jet modification in high-multiplicity events except at high jet $$p_\textrm{T}$$ p T . These measurements provide important constraints to models of jet fragmentation.