Densities of the ternary system dimethyl carbonate + butyl methacrylate + allyl methacrylate and its binary subsystem butyl methacrylate + allyl methacrylate have been measured in the whole composition range, at 293.15 K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess molar volumes of the binary system are positive and were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. Several models were used to correlate ternary behavior from the excess molar volume data of their constituent binaries and found to fit the data equally well. The best fit was based on a direct approach, without information on the component binary systems.

Densities of the binary systems of dimethyl carbonate with butyl methacrylate, allyl methacrylate, styrene, and vinyl acetate have been measured as a function of the composition at (293.15, 303.15, and 313.15) K at atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The excess molar volumes are negative for the (dimethyl carbonate + vinyl acetate) system and positive for the three other binaries, and become more so as the temperature increases from (293.15 to 313.15) K. The apparent volumes were used to calculate the values of the partial excess molar volumes at infinite dilution. The excess coefficient of thermal expansion is positive for the four binary systems. The calculated excess molar volumes were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. An explanation of the results is offered based on the FT-IR (ATR) spectra of several mixtures of the different systems.

Densities of the binary systems of toluene with butyl methacrylate, allyl methacrylate, methacrylic acid, and vinyl acetate have been measured as a function of composition at 20, 30 and 40 °C at atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The excess molar volumes are negative for the system toluene + butyl methacrylate and positive for the three other binaries, and become more so as the temperature increases from 20 to 40 °C. The system toluene + allyl methacrylate presents near ideal behavior. The apparent volumes were used to calculate values of the partial excess molar volumes at infinite dilution. The excess coefficient of thermal expansion is positive for the four binary systems. The calculated excess molar volumes were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. An explanation of the results is given based by the FT-IR (ATR) and 13C NMR spectra of equimolar mixtures of the different systems.

Densities of the ternary system, ethylbenzene + styrene + ethyl acrylate, and its three binaries have been measured in the whole composition range at 298.15 K and atmospheric pressure using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess molar volumes are positive for the binary system, ethylbenzene + ethyl acrylate, and negative for the systems ethylbenzene + styrene and styrene + ethyl acrylate. The corresponding data were correlated with the Redlich-Kister equation and with a series of Legendre polynomials. Several models were used to correlate the ternary behavior from the excess molar volume data of their constituent binaries and were found to fit the data equally well. The best fit was based on a direct approach, without information on the component binary systems.

Densities of the binary systems of benzene with butyl methacrylate, allyl methacrylate, methacrylic acid, and vinyl acetate have been measured as a function of the composition, at 298.15 K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess molar volumes were correlated with the Redlich-Kister equation and with a series of Legendre polynomials. The excess molar volumes are positive for the four binaries studied.

Densities of the ternary system toluene+butyl acrylate+methyl methacrylate and its three binaries have been measured in the whole composition range, at 298.15K and atmospheric pressure using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess molar volumes are positive for the binary systems toluene+methyl methacrylate and butyl acrylate+methyl methacrylate and negative for the system toluene+butyl acrylate. The corresponding data were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. Several empirical equations were used to correlate the ternary behavior from the excess molar volume data of their constituent binaries and were found equally good to fit the data. The best fit was based on a direct approach, without information on the component binary systems.

Densities of the binary systems of 3-methylbutyl ethanoate (isoamyl acetate) with ethyl acrylate, butyl acrylate, methyl methacrylate, and styrene have been measured as a function of composition at 25°C and atmospheric pressure using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess volumes were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. The excess volumes are positive for the binary systems of 3-methylbutyl ethanoate with each of the three acrylate monomers and negative for the system with styrene. The 3-methylbutyl ethanoate + butyl acrylate system exhibits near-ideal behavior.

Densities of the binary systems of 1,1-dimethylethyl methyl ether (MTBE) with allyl methacrylate, butyl methacrylate, methacrylic acid, and vinyl acetate have been measured as a function of the composition, at 298.15 and 308.15K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess molar volumes were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. The excess molar volumes are negative for the binaries of MTBE+methacrylates; the system MTBE with vinyl acetate presents near ideal behavior. The excess coefficient of thermal expansion is positive for all the systems studied here; the value of the coefficient for the system MTBE+allyl methacrylate is at least three times larger than that for the other systems.

Densities of the ternary system 1,4-dioxane + butyl acrylate + ethyl acrylate and its binary butyl acrylate + ethyl acrylate have been measured in the whole composition range, at 298.15 K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess molar volumes of the binary system are positive and were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. Several models were used to correlate the ternary behavior from the excess molar volume data of their constituent binaries and were found equally good to fit the data. The best fit was based on a direct approach, without information on the component binary systems.

Densities of the binary systems of tetrahydrofuran (THF) with ethenyl ethanoate (vinyl acetate), methacrylic acid, butyl methacrylate, and allyl methacrylate have been measured as a function of the composition, at 298.15 K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess volumes were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. The excess volumes are negative for the three binaries methacrylic acid + tetrahydrofuran, butyl methacrylate + tetrahydrofuran, and allyl methacrylate + tetrahydrofuran, and become smaller as the solute becomes more branched or longer. Methacrylic acid exhibits substantially larger negative excess volumes probably due to hydrogen bonding with the solvent. The system tetrahydrofuran + vinyl acetate presents near ideal behavior.

Densities of the binary systems of dimethyl sulfoxide with methacrylic acid, vinyl acetate, butyl methacrylate, and allyl methacrylate have been measured as a function of the composition, at 298.15 K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess molar volumes were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. The excess molar volumes are negative for the four binary systems, probably as a result of the large dipole moment of the solvent, and become smaller as the monomer becomes more branched or longer. Methacrylic acid exhibits substantially larger negative excess molar volumes, probably due to hydrogen bonding with the solvent. The system dimethyl sulfoxide with butyl methacrylate presents near ideal behavior.

ABSTRACT Densities of the binary systems of ethenyl ethanoate (vinyl acetate) with 1-butanol,2-butanol (sec-butanol), 2-methyl-1-propanol (iso-butanol), and 2-methyl-2-propanol (tert-butanol) have been measured as a function of the composition, at 298.15 K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess volumes were correlated with the Redlich-Kister equation and with a series of Legendre polynomials. The excess volumes are positive for the four binaries and became larger as the alcohol becomes more branched.

Densities of the binary systems of cyclohexane with allyl methacrylate, butyl methacrylate, methacrylic acid, and vinyl acetate have been measured as a function of the composition, at 298.15 and 308.15K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess molar volumes were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. The excess molar volumes are positive for the four binaries studied. Within the short temperature range considered here the coefficient of thermal expansion is positive for all the systems studied; it varies only slightly with the nature of the acrylate except for the system cyclohexane+vinyl acetate.

Densities of the binary systems of ethylbenzene with ethyl acrylate, butyl acrylate, methyl methacrylate, and styrene have been measured as a function of the composition, at 298.15 K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densitometer. The calculated excess volumes were correlated with the Redlich-Kister equation and with a series of Legendre polynomials. The excess volumes are positive for the systems ethylbenzene + (methyl methacrylate, ethyl acrylate) and negative for the systems ethylbenzene + (butyl acrylate, styrene).

Densities of the binary systems of p-xylene with ethyl acrylate, butyl acrylate, methyl methacrylate, and styrene have been measured as a function of the composition at 298.15K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess volumes were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. The excess volumes are positive for the binaries of p-xylene with methyl methacrylate and styrene and negative for the binary with butyl methacrylate. The excess volumes for the system p-xylene+ethyl acrylate are positive for p-xylene concentrations less than 0.7 mole fraction and negative afterwards. The values of the excess volume for the systems of p-xylene with ethyl acrylate and styrene are small enough to assume that they behave ideally.

Densities of the binary systems of dimethyl sulfoxide with ethyl acrylate, butyl acrylate, methyl methacrylate, and styrene have been measured as a function of the composition at 298.15 K and atmospheric pressure using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess volumes were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. The excess volumes are negative for the four binaries, probably as a result of the large dipole moment of DMSO, becoming smaller as the monomer becomes more branched or longer, and the dipole moment per monomer unit becomes larger.

Densities of the binary systems of 2,2′-oxybis[propane] with ethyl acrylate, butyl acrylate, methyl methacrylate, and styrene have been measured as a function of the composition, at 298.15 K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter and used to calculate the partial and excess volumes. The latter were correlated with the Redlich-Kister equation and with a series of Legendre polynomials. The excess volumes are negative for all the systems reported here.

Densities of the binary systems of m-xylene with ethyl acrylate, butyl acrylate, methyl methacrylate, and styrene have been measured as a function of composition, at 298.15 K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess volumes were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. The excess volumes are positive for the binaries of m -xylene with methyl methacrylate, ethyl acrylate, and styrene. The excess volumes for the m -xylene+butyl acrylate system are positive for solvent ( m -xylene) concentrations below 0.3 mole fraction and negative above this concentration.

Densities of the binary systems of 1,1-dimethylethyl methyl ether (MTBE) with ethyl acrylate, butyl acrylate, methyl methacrylate, and styrene have been measured as a function of the composition, at 298.15 K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess volumes were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. The excess volumes are negative for all the systems studied.