The ferroelectric (FE) properties of 10-nm-thick Hf0.5Zr0.5O2 (HZO) films deposited by an atomic layer deposition technique were improved by adopting O3 as an oxygen source instead of H2O. All HZO films were annealed at 400 °C for 1 min in an N2 atmosphere after TiN top electrode deposition. Regardless of the oxygen source, the HZO films exhibited the formation of a noncentrosymmetric orthorhombic phase, which is responsible for FE behavior with the suppression of the monoclinic phase. However, compared to the O3-based HZO film, it was confirmed that the H2O-based HZO film was more incorporated with hydrogen derived from H2O, thereby degrading FE polarization and leakage behavior. The results indicate that the strategy of using O3 as the oxygen source is useful for the fabrication and integration of FE HZO films for next-generation memory applications.

Correlations between physical properties linking film quality with wet etch rate (WER), one of the leading figures of merit, in plasma-enhanced atomic layer deposition (PEALD) grown silicon nitride (SiN x) films remain largely unresearched. Achieving a low WER of a SiN x film is especially significant in its use as an etch stopper for technology beyond 7 nm node semiconductor processing. Herein, we explore the correlation between the hydrogen concentration, hydrogen bonding states, bulk film density, residual impurity concentration, and the WERs of PEALD SiN x using Fourier transform infrared spectrometry, X-ray reflectivity, and spectroscopic ellipsometry, etc. PEALD SiN x films for this study were deposited using hexachlorodisilane and hollow cathode plasma source under a range of process temperatures (270-360 °C) and plasma gas compositions (N2/NH3 or Ar/NH3) to understand the influence of hydrogen concentration, hydrogen bonding states, bulk film density, and residual impurity concentration on the WER. Varying hydrogen concentration and differences in the hydrogen bonding states resulted in different bulk film densities and, accordingly, a variation in WER. We observe a linear relationship between hydrogen bonding concentration and WER as well as a reciprocal relationship between bulk film density and WER. Analogous to the PECVD SiN x processes, a reduction in hydrogen bonding concentration arises from either (1) thermal activation or (2) plasma excited species. However, unlike the case with silane (SiH4)-based PECVD SiN x, PEALD SiN x WERs are affected by residual impurities of Si precursors (i.e., chlorine impurity). Thus, possible wet etching mechanisms in HF in which the WER is affected by hydrogen bonding states or residual impurities are proposed. The shifts of amine basicity in SiN x due to different hydrogen bonding states and the changes in Si electrophilicity due to Cl impurity content are suggested as the main mechanisms that influence WER in the PEALD processes.