The General AntiParticle Spectrometer (GAPS) is a novel approach for the indirect dark matter search that exploits cosmic antideuterons. GAPS utilizes a distinctive detection method using atomic X-rays and charged particles from the exotic atom as well as the timing, stopping range and dE/dX energy deposit of the incoming particle, which provides excellent antideuteron identification. In anticipation of a future balloon experiment, an accelerator test was conducted in 2004 and 2005 at KEK, Japan, in order to prove the concept and to precisely measure the X-ray yields of antiprotonic exotic atoms formed with different target materials [1]. The X-ray yields of the exotic atoms with Al and S targets were obtained as ∼ 75%, which are higher than were previously assumed in [2]. A simple, but comprehensive cascade model has been developed not only to evaluate the measurement results but also to predict the X-ray yields of the exotic atoms formed with any materials in the GAPS instrument. The cascade model is extendable to any kind of exotic atom (any negatively charged cascading particles with any target materials), and it was compared and validated with other experimental data and cascade models for muonic and antiprotonic exotic atoms. The X-ray yields of the antideuteronic exotic atoms are predicted with a simple cascade model and the sensitivity for the GAPS antideuteron search was estimated for the proposed long duration balloon program [3], which suggests that GAPS has a strong potential to detect antideuterons as a dark matter signature. A GAPS prototype flight (pGAPS) was launched successfully from the JAXA/ISAS balloon facility in Hokkaido, Japan in summer 2012 [4], [5] and a proposed GAPS science flight is to fly from Antarctica in the austral summer of 2017–2018.

We discuss current progress and future plans for the general antiparticle spectrometer experiment (GAPS). GAPS detects antideuterons through the X-rays and pions emitted during the deexcitation of exotic atoms formed when the antideuterons are slowed down and stopped in targets. GAPS provides an exceptionally sensitive means to detect cosmic-ray antideuterons. Cosmic-ray antideuterons can provide indirect evidence for the existence of dark matter in such form as neutralinos or Kaluza–Klein particles. We describe results of accelerator testing of GAPS prototypes, tentative design concepts for a flight GAPS detector, and near-term plans for flying a GAPS prototype on a balloon.

The General Antiparticle Spectrometer (GAPS) exploits low energy antideuterons produced in neutralino-neutralino annihilations as an indirect dark matter (DM) signature that is effectively free from background. When an antiparticle is captured by a target material, it forms an exotic atom in an excited state which quickly decays by emitting X-rays of precisely defined energy and a correlated pion signature from nuclear annihilation. We have successfully demonstrated the GAPS method in an accelerator environment and are currently planning a prototype flight from Japan for 2009. This will lead to a long duration balloon (LDB) mission that will complement existing and planned direct DM searches as well as other indirect techniques, probing a different, and often unique, region of parameter space in a variety of proposed DM models. Planes of coarsely pixellated Si(Li) detectors form the heart of the GAPS flight detector, providing both high X-ray energy resolution and good particle tracking. We will describe the proto-flight mission that will verify the performance of our Si(Li) detectors and cooling system in a flight-like configuration. We also will outline the LDB science payload design.

We report on recent accelerator testing of a prototype general antiparticle spectrometer (GAPS). GAPS is a novel approach for indirect dark matter searches that exploits the antideuterons produced in neutralino-neutralino annihilations. Many supersymmetry models, as well as other models based on extra dimensions, predict a primary antideuteron flux from dark matter annihilation that is much greater than the secondary and tertiary background sources at low energies. The GAPS method involves capturing antiparticles in a target material into excited energy states. The X-rays that are emitted as the antiparticle cascades to lower energy states before the exotic atom decays serve as a fingerprint that uniquely identifies the mass of the captured antiparticle. This approach provides large area and field of view in addition to excellent background rejection capability. Analysis of the performance of a prototype GAPS tested in an antiproton beam at the KEK accelerator in Japan in 2004 and 2005 are presented.

We report on recent accelerator testing of a prototype general antiparticle spectrometer (GAPS). GAPS uses a novel approach for indirect dark matter searches that exploits the antideuterons produced in neutralino–neutralino annihilations. GAPS captures these antideuterons into a target with the subsequent formation of exotic atoms. These exotic atoms decay with the emission of x-rays of precisely defined energy and a correlated pion signature from nuclear annihilation. This signature uniquely characterizes the antideuterons. Preliminary analysis of data from a prototype GAPS in an antiproton beam at the KEK accelerator in Japan has confirmed the multiple x-ray/pion star topology and indicated x-ray yields consistent with prior expectations. Moreover, our success in utilizing solid rather than gas targets represents a significant simplification over our original approach and offers potential gains in sensitivity through reduced dead mass in the target area.

Complete hard X-ray optics modules are currently being produced for the High Energy Focusing Telescope (HEFT), a balloon born mission that will observe a wide range of objects including young supernova remnants, active galactic nuclei, and galaxy clusters at energies between 20 and 70 keV. Large collecting areas are achieved by tightly nesting layers of grazing incidence mirrors in a conic approximation Wolter-I design. The segmented layers are made of thermally-formed glass substrates coated with depth-graded multilayer films for enhanced reflectivity. Our novel mounting technique involves constraining these mirror segments to successive layers of precisely machined graphite spacers. We report the production and calibration of the first HEFT optics module.

We report progress in developing a novel antimatter detection scheme. The gaseous antiparticle spectrometer (GAPS) identifies antimatter through the characteristic X-rays emitted by antimatter when it forms exotic atoms in gases. The approach provides large area and field of view, and excellent background rejection capability. If the GAPS concept is successfully demonstrated, then it would be an ideal candidate for space-based, indirect dark matter searches. GAPS can detect antideuterons produced in neutralino annihilations. A modest GAPS experiment can detect the neutralino for all minimal SUSY models in which the neutralino mass is in the 50-350 GeV mass range. Underground searches, by contrast, are only sensitive to about 1/2 the SUSY parameter space in this mass range.

We report on the fabrication and performance of prototype optics for the Constellation-X hard X-ray telescope (HXT). The prototypes utilize segmented-glass optics. Multiple glass segments are combined to produce telescope shells. The shells are separated by and epoxied to graphite rods, and each layer of rods is precisely machined to match the required optical geometry of the corresponding glass shell. This error-compensating, monolithic assembly and alignment (EMAAL) procedure is novel. Two prototypes are described. The first used 10cm long thermally-slumped glass pieces produced by slumping into a concave mandrel with no subsequent replication. This prototype obtained 45" (2-bounce HPD). The second prototype was the first attempt to mount epoxy-replicated, thermally-slumped glass optics using EMAAL. The latter prototype demonstrated our ability to produce and mount glass shells whose figure and performance are faithful representations of the original replication mandrel. The average performance was 45", with the best replicated segment providing 33" (2-bounce HPD) performance, consistent with the ~30" measured with laser reflectometry and interferometry prior to mounting. Both these prototypes substantially exceeded the HXT requirement of 60".

The High Energy Focusing Telescope (HEFT) will observe a wide range of objects including young supernova remnants, active galactic nuclei, and galaxy clusters at energies between 20 and 70 keV. Large collecting areas are achieved by tightly nesting layers of grazing incidence mirrors in a conic approximation Wolter-I design. The segmented mirrors that form these layers are made of thermally formed glass substrates coated with depth-graded multilayer films for enhanced reflectivity. The mirrors are assembled using an over-constraint method that forces the overall shape of the nominally cylindrical substrates to the appropriate conic form. We will present performance data on the HEFT optics and report the current status of the assembly production.