We describe the different mixed colloidal solutions that can be obtained when mixing equivalent quantities of a synthetic anionic clay to surfactants forming lamellar phases in the absence of added salt. The important quantity driving toward insertion or depletion is the osmotic pressure, of the lamellar phase and of the clay alone. Competition for water is the main driving force toward dispersion, inclusion or exclusion (phase separation). In the case of a nonionic surfactant ( C_12E_5 ) mixed with Laponite, undulations quenched by the surfactant-decorated clay lead to swelling; inclusion is not observed due to differences in rigidity. Long-range order is weakened leading eventually to the exclusion of surfactant in excess. In the case of a double anionic system (AOT-Laponite), electrostatic is dominant and the three regimes are encountered. In the catanionic case, admixing the double chain cationic lipid DDAB to the clay (in large charge excess), the platelets are coated by a positively charged bilayer. Long-range order is very efficiently dampened. From a low threshold (2
Mixtures of hyaluronic acid (HA, in the semi-dilute entangled regime) with liposomes (high lipid concentration) exhibit a great interest in drug delivery. Considering the difference of microstructures when varying the liposome surface, we aimed to determine if liposome characteristics (surface and size) also influenced their release from these hybrid systems and to explore the mechanisms involved. Small-angle neutron scattering, cryogenic electron microscopy, zetametry, and dynamic light scattering were used to characterize liposomes. The implemented Transwell® model (two compartments separated by a polycarbonate membrane) showed that both size and surface governed liposome release. At 150 nm, anionic liposomes with or without poly(ethylene glycol) chains (PEG) migrated from HA-liposome mixtures, while cationic and neutral ones did not. Furthermore, increasing the size of PEGylated liposomes up to 200 nm or more strongly hindered their migration. Below 200 nm, the smaller the liposome size, the faster the release. Multiple and complex mechanisms (interactions between HA and liposomes, water exchanges, liposome migration, swelling and erosion, and HA reptation) were involved. Their relative importance depended on liposome characteristics. The Transwell® model is a pertinent tool to assess in vitro the release of liposomes over several weeks and discriminate the formulations, depending on the foreseen therapeutic strategy.
Low charge density nanometric ions were recently shown to bind strongly to neutral hydrated matter in aqueous solution. This phenomenon, called the (super-)chaotropic effect, arises from the partial dehydration of both the nano-ion and the solute, leading to a significant gain in enthalpy. Here, we investigate the chaotropic effect of the polyoxometalate α-PW12O403− on the triblock copolymer P84: (EO)19(PO)43(EO)19 with (EO)19 the polyethoxylated and (PO)43 the polypropoxylated chains. The combination of phase diagrams, spectroscopic (nuclear magnetic resonance) and scattering (small angle neutron/X-ray scattering) techniques revealed that: (i) below the micellization temperature of P84, PW12O403− exclusively binds to the propylene oxide moiety of P84 unimers; and (ii) above the micellization temperature, PW12O403− mostly adsorbs on the ethylene oxide micellar corona. The preferential binding of the PW12O403− to the PPO chain over the PEO chains suggests that the binding is driven by the chaotropic effect and is reinforced by the hydrophobic effect. At higher temperatures, copolymer micellization leads to the displacement of PW12O403− from the PPO chain to the PEO chains. This study deepens our understanding of the subtle interplay between the chaotropic and hydrophobic effects in complex salt-organic matter solutions.
Mixtures of hyaluronic acid (HA) with liposomes lead to hybrid colloid-polymer systems with a great interest in drug delivery. However, little is known about their microstructure. Small angle neutron scattering (SANS) is a valuable tool to characterize these systems in the semi-dilute entangled regime (1.5% HA) at high liposome concentration (80 mM lipids). The objective was to elucidate the influence of liposome surface (neutral, cationic, anionic or anionic PEGylated), drug encapsulation and HA concentration in a buffer mimicking biological fluids (37 degrees C). First, liposomes were characterized by SANS, cryo-electron microscopy, and dynamic light scattering and HA by SANS, size exclusion chromatography, and rheology. Secondly, HA-liposome mixtures were studied by SANS. In HA, liposomes kept their integrity. Anionic and PEGylated liposomes were in close contact within dense clusters with an amorphous organization. The center-to-center distance between liposomes corresponded to twice their diameter. A depletion mechanism could explain these findings. Encapsulation of a corticoid did not modify this organization. Cationic liposomes formed less dense aggregates and were better dispersed due to their complexation with HA. Liposome surface governed the interactions and microstructure of these hybrid systems. (C) 2022 Elsevier Inc. All rights reserved.
Phenylketonuria (PKU) is a metabolic disorder connected to an excess of phenylalanine (Phe) in the blood and tissues, with neurological consequences. The disease's molecular bases seem to be related to the accumulation of Phe at the cell membrane surface. Radiological outcomes in the brain demonstrate decreased water diffusivity in white matter, involving axon dysmyelination of not yet understood origin. We used a biophysical approach and model membranes to extend our knowledge of Phe-membrane interaction by clarifying Phe's propensity to affect membrane structure and dynamics based on lipid composition, with emphasis on modulating cholesterol and glycolipid components to mimic raft domains and myelin sheath membranes. Phe showed affinity for the investigated membrane mimics, mainly affecting the Phe-facing membrane leaflet. The surfaces of our neuronal membrane raft mimics were strong anchoring sites for Phe, showing rigidifying effects. From a therapeutic perspective, we further investigated the role of doxycycline, known to disturb Phe packing, unveiling its action as a competitor in Phe interactions with the membrane, suggesting its potential for treatment in the early stages of PKU. Our results suggest how Phe accumulation in extracellular fluids can impede normal growth of myelin sheaths by interfering with membrane slipping and by remodulating free water and myelin-associated water contents.
Temperature-responsive nanomaterials have gained increasing interest over the past decade due their ability to undergo conformational changes in situ, in response to a change in temperature. One class of temperature-responsive polymers are those with lower critical solution temperature, which phase separate in aqueous solution above a critical temperature. When these temperature-responsive polymers are grafted to a solid nanoparticle, a change in their surface properties occurs above this critical temperature, from hydrophilic to more hydrophobic, giving them a propensity to aggregate. This study explores the temperature induced aggregation of silica nanoparticles functionalised with two isomeric temperature-responsive polymers with lower critical solution temperature (LCST) behavior, namely poly(N-isopropyl acrylamide) (PNIPAM), and poly(2-n-propyl-2-oxazoline) (PNPOZ) with similar molecular weights (5000 Da) and grafting density. These nanoparticles exhibited striking differences in the temperature of aggregation, which is consistent with LCST of each polymer. Using a combination of small-angle neutron scattering (SANS) and dynamic light scattering (DLS), we probed subtle differences in the aggregation mechanism for PNIPAM- and PNPOZ-decorated silica nanoparticles. The nanoparticles decorated with PNIPAM and PNPOZ show similar aggregation mechanism that was independent of polymer structure, whereby aggregation starts by the formation of small aggregates. A further increase in temperature leads to interaction between these aggregates and results in full-scale aggregation and subsequent phase separation.
Hypothesis: Weakly hydrated nanometric ions, called superchaotropes, were recently shown to adsorb strongly to non-ionic surfaces affecting drastically the surface's physical-chemical properties due to a charging effect. Superchaotropic ions could serve as stabilizing agents for non-ionic colloidal systems, such as non-ionic surfactant foams. Experiments: We study foams of the non-ionic surfactant BrijO10 (C18:1E10) without and in presence of the superchaotropic Keggin-ion SiW12O404 (SiW). The foams are investigated under free drainage conditions by image analysis and conductimetry to reveal the effect of SiW on the foam stability, liquid drainage, and bubble size. Additionally, small angle neutron scattering on the same foams, but in a dry quasistationary state, provides insight into effects of SiW on the foam films. Findings: SiW strongly stabilizes non-ionic surfactant foams at millimolar concentrations by inducing electrostatic repulsions between foam film interfaces resulting in thicker and monodisperse foam films. A similar effect is observed with the ionic surfactant sodium dodecylsulfate (SDS) but to a lesser extent and with a different mechanism. At the foam films' interface, SiW adsorbs to the polar non-ionic surfactant heads driven by the superchaotropic effect whereas DS anchors between non-ionic surfactant alkyl chains by the hydrophobic effect. The potential of superchaotropic ions as foam stabilizers is herein demonstrated. (C) 2021 Elsevier Inc. All rights reserved.
Even in the absence of surfactants, polymers, or particles, spontaneous emulsions produced by dilution with water can be stable over days. This "Ouzo effect" used by the industry is obtained by rapid dilution from an identified "pre-Ouzo" domain of composition where weak aggregates are present: nanometer-sized clusters covered by a surface layer enriched in a hydrotrope such as ethanol. In these systems, Ostwald ripening is not an effective destabilizing mechanism. Using in situ autodilution small-angle X-ray scattering (SAXS), we follow the morphological transitions occurring in a ternary mixture of water/n-octanol/ethanol throughout the monophasic and biphasic regions. This allows for the first time an online characterization of the multiscale coexisting microstructures. Small-angle neutron scattering (SANS) profiles on metastable emulsions as well as phase-separated samples complete the SAXS data, taking advantage of contrast variation via isotopic substitution. After crossing the phase boundary into the two-phase region, coexisting phases are both ternary solutions structured at the nanometer scale when the emulsion is stable. The transition from single phase to two phases is asymmetric around the plait point. When the initial concentration of the hydrotrope is below the minimum hydrotrope concentration (MHC), emulsification failure occurs, i.e., emulsions cream within seconds. Beyond MHC, the low interfacial tension between coexisting ternary fluids results in a Laplace pressure below 100 Pa, explaining the puzzling resilience of spontaneous emulsion to the universal mechanism of Ostwald ripening.
Cellulose microfibrils in conifers, as in other woody materials, are aggregated into loose bundles called macrofibrils. The centre-to-centre spacing of the microfibrils within these macrofibrils can be estimated from the position of a broad diffraction peak in small-angle neutron scattering (SANS) after deuteration. A known spacing of 3.0 nm, increasing with moisture content, is consistent with direct microfibril to microfibril contact. However recent evidence indicates that conifer microfibrils are partially coated with bound xylan chains, and possibly with lignin and galactoglucomannan, implying a wider centre-to-centre spacing as found in angiosperm wood. Delignification of spruce wood allowed a weak SANS peak to be observed without measurable change in spacing. By deuterating spruce wood in mildly alkaline D2O and then re-equilibrating with ambient H2O, deuterium atoms were trapped in a position that gave a 3.8 nm microfibril spacing under dry conditions as in angiosperm wood, instead of the 3.0 nm spacing normally observed in conifers. After conventional vapour deuteration of spruce wood a minor peak at 3.8 nm could be fitted in addition to the 3.0 nm peak. These observations are consistent with some microfibril segments being separated by bound xylan chains as in angiosperms, in addition to the microfibril segments that are in direct contact.
Origin of life scenarios generally assume an onset of cell formation in terrestrial hot springs or in the deep oceans close to hot vents, where energy was available for non-enzymatic reactions. Membranes of the protocells had therefore to withstand extreme conditions different from what is found on the Earth surface today. We present here an exhaustive study of temperature stability up to 80 °C of vesicles formed by a mixture of short-chain fatty acids and alcohols, which are plausible candidates for membranes permitting the compartmentalization of protocells. We confirm that the presence of alcohol has a strong structuring and stabilizing impact on the lamellar structures. Moreover and most importantly, at a high temperature (> 60 °C), we observe a conformational transition in the vesicles, which results from vesicular fusion. Because all the most likely environments for the origin of life involve high temperatures, our results imply the need to take into account such a transition and its effect when studying the behavior of a protomembrane model.
A triblock copolymer with hydrophobic end blocks and a polyampholytic middle block is investigated in a mixture of water and acetone with a focus on the dependence of the rheological properties and of the micellar structure and correlation on the content of acetone. The polymer under study is PMMA 86 - b -P(DEA 190 - co -MAA 96 )- b -PMMA 86 , where PMMA stands for poly(methyl methacrylate) and P(DEA- co -MAA) for poly(2-(diethylamino) ethyl methacrylate- co -methacrylic acid). The pH is chosen at 3. Rheological measurements reveal a transition from a viscoelastic solid over a viscoelastic liquid to a freely flowing liquid upon addition of 5 or 10 wt% of acetone to a 3 wt% aqueous polymer solution, respectively. Using small-angle neutron scattering on 0.5 wt% polymer solutions in water/acetone with the content of the latter ranging between 0 and 30 wt%, significant structural changes are observed as well, such as a decrease of the distance between the PMMA cross-links and of the size of the network clusters upon increasing acetone constant. These changes are attributed to the reduction of the dielectric constant by the addition of the cosolvent acetone, enhancing the flexibility of the middle blocks and their tendency to backfolding, as well as to the decrease of the solvent selectivity, inducing significant exchange rate enhancement of the core-forming PMMA blocks.
Pseudopolyrotaxanes (PPRs) are supramolecular host-guest complexes constituted by the reversible threading of macrocycles along a polymer chain. We report the formation of hybrid PPRs (hPPRs), where two types of cyclodextrins (CDs) thread either simultaneously or sequentially on four-arm poly-(ethylene oxide)-poly(propylene oxide) (PEO-PPO) block copolymers (Tetronic): native alpha-CD (CD) (with higher affinity for PEO) and dimethylated beta-CD (DIMEB, with higher affinity for PPO). The competitive complexation along the chains is examined with three Tetronics, differing mainly in the length of their PEO blocks: T904, T1107, and T1307. While PPRs formed with alpha-CD are insoluble, due to the hydrogen-bond network formed between adjacent alpha-CDs, the presence of DIMEB leads to soluble hybrid PPRs, slows down the kinetics of complexation, and increases the number of alpha-CDs threaded per arm. The morphology of the constructs in solution over time is followed by time-resolved small-angle neutron scattering (TR-SANS), while their crystalline structure is studied by X-ray diffraction. Whereas the complexation of the polymeric surfactant with DIMEB shifts the unimer-micelle equilibrium toward unimers, the presence of alpha-CD slows down demicellization and reduces its extent. Overall, the co-threading of two cyclodextrins on the same polymer provides a handle to tune the complexation process and the final properties of the PPR, including solubility, kinetics of complexation, and composition of the complexes.
Recently, nanometric ions were shown to adsorb to hydrated neutral surfaces and to bind to the cavities of macrocyclic molecules with an unexpectedly strong affinity arising from a solvent-mediated effect named superchaotropicity. We show here that nano-ions at low concentrations (μm range), similarly to anionic surfactants, induce the spontaneous transformation of a swollen lyotropic lamellar phase of non-ionic surfactant into a vesicle phase. This transition occurs when the neutral lamellae acquire charges, either by adsorption of the nano-ions onto, or by anchoring of the ionic surfactant into the lamellae. In contrast to ionic surfactants, nano-ions strongly dehydrate the neutral surfactant assemblies. As a conclusion, these purely inorganic nanometric ions act as alternatives to the widely used organic ionic surfactants.
C109 is a potent but poorly soluble FtsZ inhibitor displaying promising activity against Burkholderia cenocepacia, a high-risk pathogen for cystic fibrosis (CF) sufferers. To harness C109 for inhalation, we developed nanocrystal-embedded dry powders for inhalation suspension consisting in C109 nanocrystals stabilized with D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) embedded in hydroxypropyl-β-cyclodextrin (CD). The powders could be safely re-dispersed in water for in vitro aerosolization. Owing to the presence of a PEG shell, the rod shape and the peculiar aspect ratio, C109 nanocrystals were able to diffuse through artificial CF mucus. The promising technological features were completed by encouraging in vitro/in vivo effects. The formulations displayed no toxicity towards human bronchial epithelial cells and were active against planktonic and sessile B. cenocepacia strains. The efficacy of C109 nanosuspensions in combination with piperacillin was confirmed in a Galleria mellonella infection model, strengthening their potential for combined therapy of B. cenocepacia lung infections.
The foundations of silk spinning, the structure, storage, and activation of silk proteins, remain highly debated. By combining solution small-angle neutron and X-ray scattering (SANS and SAXS) alongside circular dichroism (CD), we reveal a shape anisotropy of the four principal native spider silk feedstocks from Nephila edulis. We show that these proteins behave in solution like elongated semiflexible polymers with locally rigid sections. We demonstrated that minor ampullate and cylindriform proteins adopt a monomeric conformation, while major ampullate and flagelliform proteins have a preference for dimerization. From an evolutionary perspective, we propose that such dimerization arose to help the processing of disordered silk proteins. Collectively, our results provide insights into the molecular-scale processing of silk, uncovering a degree of evolutionary convergence in protein structures and chemistry that supports the macroscale micellar/pseudo liquid crystalline spinning mechanisms proposed by the community.
Hard-sphere particles in nonpolar solvents are an essential tool for colloid scientists. Sterically stabilized poly(methyl methacrylate) (PMMA) particles have long been used as the exemplary hard-sphere system. However, neither the particles themselves nor the poly(12-hydroxystearic acid) (PHSA) stabilizer necessary to prevent aggregation in nonpolar solvents are commercially available. To counter this, several alternatives have been proposed. In recent years, there has been an increased interest in poly(dimethylsiloxane) (PDMS) stabilizers as a commercially available alternative to PHSA, yet the structure of particles made in this way is not as well understood as those produced using PHSA. In this work, we employ small-angle neutron scattering to determine the internal structure of PDMS-stabilized PMMA particles, synthesized with and without an additional crosslinking agent. We report data consistent with a homogeneous PMMA core with a linearly decaying PDMS shell. The thickness of the shell was in excess of 50 nm, thicker than the PHSA layer typically used to stabilize PMMA but consistent with reports of the layer thickness for similar molecular weight PDMS at planar surfaces. We also show that the amount of the hydrogenous material in the particle core of the crosslinked particles notably exceeds the amount of added ethylene glycol dimethacrylate crosslinker, suggesting some entrapment of the PDMS stabilizer in the PMMA matrix.
Hypotheses: Bile salts (BS) are biosurfactants released into the small intestine, which play key and contrasting roles in lipid digestion: they adsorb at interfaces and promote the adsorption of digestive enzymes onto fat droplets, while they also remove lipolysis products from that interface, solubilising them into mixed micelles. Small architectural variations on their chemical structure, specifically their bile acid moiety, are hypothesised to underlie these conflicting functionalities, which should be reflected in different aggregation and solubilisation behaviour. Experiments: The micellisation of two BS, sodium taurocholate (NaTC) and sodium taurodeoxycholate (NaTDC), which differ by one hydroxyl group on the bile acid moiety, was assessed by pyrene fluorescence spectroscopy, and the morphology of aggregates formed in the absence and presence of fatty acids (FA) and monoacylglycerols (MAG) - typical lipolysis products - was resolved by small-angle X-ray/neutron scattering (SAXS, SANS) and molecular dynamics simulations. The solubilisation by BS of triacylglycerolincorporating liposomes - mimicking ingested lipids - was studied by neutron reflectometry and SANS. Findings: Our results demonstrate that BS micelles exhibit an ellipsoidal shape. NaTDC displays a lower critical micellar concentration and forms larger and more spherical aggregates than NaTC. Similar observations were made for BS micelles mixed with FA and MAG. Structural studies with liposomes show that the addition of BS induces their solubilisation into mixed micelles, with NaTDC displaying a higher solubilising capacity. (c) 2020 Elsevier Inc. All rights reserved.
Hypothesis: To study molecular exchange between colloids requires the preparation of suitably labelled species. Deuterium isotopic labelling has been used to prepare two chemically identical yet isotopically distinguishable poly(lauryl methacrylate)-poly(methyl methacrylate) (PLMA-PMMA) diblock copolymer colloids by polymerisation-induced self-assembly (PISA) directly in an alkane solvent. Molecular exchange should be detectable by performing small-angle neutron scattering (SANS) measurements on the dispersions. Experiments: SANS measurements were performed on fully hydrogenous PLMA(39)-PMMA(57) and deuterated core PLMA(39)-P(MMA-d(8))(57) colloids. They were mixed in equal amounts and heated to determine if molecular exchange occurred. PISA syntheses are often thermally initiated, and diblock copolymers self-assemble at elevated temperature, making this an important parameter to study. Experimental data for the mixture were compared to predicted curves for exchanged and non-exchanged colloids. Findings: The scattering of a mixture of fully hydrogenous and deuterated core copolymers does not disappear upon molecular exchange, due to the remaining contrast between the stabiliser and the core and solvent even after the cores fully exchange. By simultaneously fitting the SANS data from dispersions before mixing and using these parameters to constrain fitting the SANS data of mixtures, the molecular exchange between diblock copolymer micelles upon heating is clearly observed. (C) 2020 The Author(s). Published by Elsevier Inc.
In the field of nanomedicine, nanostructured nanoparticles (NPs) made of self-assembling prodrugs emerged in the recent years with promising properties. In particular, squalene-based drug nanoparticles have already shown their efficiency through in vivo experiments. However, a complete pattern of their stability and interactions in the blood stream is still lacking. In this work we assess the behavior of squalene-adenosine (SQAd) nanoparticles - whose neuroprotective effect has already been demonstrated in murine models - in the presence of fetal bovine serum (FBS) and of bovine serum albumin (BSA), the main protein of blood plasma. Extensive physicochemical characterizations were performed using Small Angle Neutron Scattering (SANS), cryogenic transmission electron microscopy (Cryo-TEM), circular dichroism (CD), steady-state fluorescence spectroscopy (SSFS) and isothermal titration calorimetry (ITC) as well as in silico by means of ensemble docking simulations with human serum albumin (HSA). Significant changes in the colloidal stability of the nanoparticles in the presence of serum albumin were observed. SANS, CD and SSFS analyses demonstrated an interaction between SQAd and BSA, with a partial disassembly of the nanoparticles in the presence of BSA and the formation of a complex between SQAd and BSA. The interaction free energy of SQAd nanoparticles with BSA derived from ITC experiments, is about -8 kcal mol-1 which is further supported in silico by ensemble docking simulations. Overall, our results show that serum albumin partially disassembles SQAd nanoparticles by extracting individual SQAd monomers from them. As a consequence, the SQAd nanoparticles would act as a circulating reservoir in the blood stream. The approach developed in this study could be extended to other soft organic nanoparticles.