We describe the outcome of a large international interlaboratory study of the measurement of particle number concentration of colloidal nanoparticles, project 10 of the technical working area 34, "Nanoparticle Populations" of the Versailles Project on Advanced Materials and Standards (VAMAS). A total of 50 laboratories delivered results for the number concentration of 30 nm gold colloidal nanoparticles measured using particle tracking analysis (PTA), single particle inductively coupled plasma mass spectrometry (spICP-MS), ultraviolet-visible (UV-Vis) light spectroscopy, centrifugal liquid sedimentation (CLS) and small angle X-ray scattering (SAXS). The study provides quantitative data to evaluate the repeatability of these methods and their reproducibility in the measurement of number concentration of model nanoparticle systems following a common measurement protocol. We find that the population-averaging methods of SAXS, CLS and UV-Vis have high measurement repeatability and reproducibility, with between-labs variability of 2.6%, 11% and 1.4% respectively. However, results may be significantly biased for reasons including inaccurate material properties whose values are used to compute the number concentration. Particle-counting method results are less reproducibile than population-averaging methods, with measured between-labs variability of 68% and 46% for PTA and spICP-MS respectively. This study provides the stakeholder community with important comparative data to underpin measurement reproducibility and method validation for number concentration of nanoparticles.

The sonication process is commonly used for de-agglomerating and dispersing nanomaterials in aqueous based media, necessary to improve homogeneity and stability of the suspension. In this study, a systematic step-wise approach is carried out to identify optimal sonication conditions in order to achieve a stable dispersion. This approach has been adopted and shown to be suitable for several nanomaterials (cerium oxide, zinc oxide, and carbon nanotubes) dispersed in deionized (DI) water. However, with any change in either the nanomaterial type or dispersing medium, there needs to be optimization of the basic protocol by adjusting various factors such as sonication time, power, and sonicator type as well as temperature rise during the process. The approach records the dispersion process in detail. This is necessary to identify the time points as well as other above-mentioned conditions during the sonication process in which there may be undesirable changes, such as damage to the particle surface thus affecting surface properties. Our goal is to offer a harmonized approach that can control the quality of the final, produced dispersion. Such a guideline is instrumental in ensuring dispersion quality repeatability in the nanoscience community, particularly in the field of nanotoxicology.

Nanoparticle morphology is expected to play a significant role in the stability, aggregation behavior, and ultimate fate of engineered nanomaterials in natural aquatic environments. The aggregation kinetics of ellipsoidal and spherical titanium dioxide (TiO2) nanoparticles (NPs) under different surfactant loadings, pH values, and ionic strengths were investigated in this study. The stability results revealed that alteration of surface charge was the stability determining factor. Among five different surfactants investigated, sodium citrate and Suwannee river fulvic acid (SRFA) were the most effective stabilizers. It was observed that both types of NPs were more stable in monovalent salts (NaCl and NaNO3) as compared with divalent salts (Ca(NO3)2 and CaCl2). The aggregation of spherical TiO2 NPs demonstrated a strong dependency on the ionic strength regardless of the presence of mono or divalent salts; while the ellipsoids exhibited a lower dependency on the ionic strength but was more stable. This work acts as a benchmark study toward understanding the ultimate fate of stabilized NPs in natural environments that are rich in Ca(CO3)2, NaNO3, NaCl, and CaCl2 along with natural organic matters.

Recent interest in the environmental fate and effects of manufactured CeO2 nanomaterials (nanoceria) has stemmed from its expanded use for a variety of applications including fuel additives, catalytic converters, chemical and mechanical planarization media and other uses. This has led to a number of publications on the toxicological effects of nanoceria in ecological receptor species, but only limited information is available on possible environmental releases, concentrations in environmental media, or environmental transformations. Increasing material flows of nanoceria in many applications is likely to result in increasing releases to air, water and soils however; insufficient information was available to estimate aquatic exposures that would result in acute or chronic toxicity. The purpose of this review is to identify which areas are lacking in data to perform either regional or site specific ecological risk assessments. While estimates can be made for releases from use as a diesel fuel additive, and predicted toxicity is low in most terrestrial species tested to date, estimates for releases from other uses are difficult at this stage. We recommend that future studies focus on environmentally realistic exposures that take into account potential environmental transformations of the nanoceria surface as well as chronic toxicity studies in benthic aquatic organisms, soil invertebrates and microorganisms.