We experimentally demonstrate optical trapping of 87 Rb ?> atoms using a two-color evanescent field around an optical nanofiber. In our trapping geometry, a blue-detuned traveling wave whose polarization is nearly parallel to the polarization of a red-detuned standing wave produces significant vector light shifts that lead to broadening of the absorption profile of a near-resonant beam at the trapping site. A model that includes scalar, vector, and tensor light shifts of the probe transition 5 S 1 / 2 ?> - 5 P 3 / 2 ?> from the trapping beams, weighted by the temperature-dependent position of the atoms in the trap, qualitatively describes the observed asymmetric profile and explains differences with previous experiments that used Cs atoms. The model provides a consistent way to extract the number of atoms in the trap.

We have coupled a tapered optical microfiber to a translatable thin-film lumped-element superconducting Al microwave resonator that is cooled to 15 mK. The thin-film resonator has a resonance frequency of 6.14 GHz, a quality factor of Q = 2.59 × 105, and is mounted inside a 3-D Al microwave cavity that provides a well-isolated electromagnetic environment. The microfiber is held fixed while the cavity is mounted on an x-z translation stage that allows the lumped-element resonator and the optical fiber to be brought close to each other (less than 1 mm). When 780-nm light is sent through the fiber, Rayleigh scattering in the fiber causes a weak position-dependent nonuniform illumination of the thin-film resonator, exciting quasiparticles in the superconducting film and thereby affecting its resonance frequency fo and Q. We report on the response of the resonator to both the scattered optical power and the presence of the fiber's dielectric, as the thin-film resonator is moved in situ with respect to the fiber.

We present a procedure for reproducibly fabricating ultrahigh transmission optical nanofibers (530 nm diameter and 84 mm stretch) with single-mode transmissions of 99.95 ± 0.02%, which represents a loss from tapering of 2.6 × 10−5 dB/mm when normalized to the entire stretch. When controllably launching the next family of higher-order modes on a fiber with 195 mm stretch, we achieve a transmission of 97.8 ± 2.8%, which has a loss from tapering of 5.0 × 10−4 dB/mm when normalized to the entire stretch. Our pulling and transfer procedures allow us to fabricate optical nanofibers that transmit more than 400 mW in high vacuum conditions. These results, published as parameters in our previous work, present an improvement of two orders of magnitude less loss for the fundamental mode and an increase in transmission of more than 300% for higher-order modes, when following the protocols detailed in this paper. We extract from the transmission during the pull, the only reported spectrogram of a fundamental mode launch that does not include excitation to asymmetric modes; in stark contrast to a pull in which our cleaning protocol is not followed. These results depend critically on the pre-pull cleanliness and when properly following our pulling protocols are in excellent agreement with simulations.

Optical nanofibers confine light to subwavelength scales, and are of interest for the design, integration, and interconnection of nanophotonic devices. Here we demonstrate high transmission (> 97%) of the first family of excited modes through a 350 nm radius fiber, by appropriate choice of the fiber and precise control of the taper geometry. We can design the nanofibers so that these modes propagate with most of their energy outside the waist region. We also present an optical setup for selectively launching these modes with less than 1% fundamental mode contamination. Our experimental results are in good agreement with simulations of the propagation. Multimode optical nanofibers expand the photonic toolbox, and may aid in the realization of a fully integrated nanoscale device for communication science, laser science or other sensing applications.

Hybrid quantum systems can be formed that combine the strengths of multiple platforms while avoiding the weaknesses. Here we report on progress toward a hybrid quantum system of neutral atom spins coupled to superconducting qubits. We trap laser-cooled rubidium atoms in the evanescent field of an ultrathin optical fiber, which will be suspended a few microns above a superconducting circuit that resonates at the hyperfine frequency of the Rb atoms, allowing magnetic coupling between the atoms and superconductor. As this will be done in a dilution refrigerator environment, the technical demands on the optical fiber is severe. We have developed and optimized a tapered fiber fabrication system, achieving optical transmission in excess of 99.95%, and fibers that can sustain 400 mW of optical power in a UHV environment. We have also optimized tapered fibers that can support higher order optical modes with high transmission (> 97%), which may be useful for different optical potential geometries. We have developed an in-situ tunable high-Q superconducting microwave resonator that can be tuned to within the resonator linewidth of the 6.8 GHz frequency of the Rb hyperfine transition.

We present an experimental and theoretical study of the energy transfer between modes during the tapering process of an optical nanofiber through spectrogram analysis. The results allow optimization of the tapering process, and we measure transmission in excess of 99.95% for the fundamental mode. We quantify the adiabaticity condition through calculations and place an upper bound on the amount of energy transferred to other modes at each step of the tapering, giving practical limits to the tapering angle.