GIADA (Grain Impact Analyzer and Dust Accumulator) on-board the Rosetta space probe is designed to measure the momentum, mass and speed of individual dust particles escaping the nucleus of comet 67P/Churyumov-Gerasimenko (hereafter 67P). From August 2014 to June 2016 Rosetta escorted comet 67P during its journey around the Sun. Here we focus on GIADA data taken between 2015 January and 2016 February which included 67P’s perihelion passage. To better understand cometary activity and more specifically the presence of dust structures in cometary comae, we mapped the spatial distribution of dust density in 67P’s coma. In this manner we could track the evolution of high density regions of coma dust and their connections with nucleus illumination conditions, namely tracking 67P’s seasons. We also studied the link between dust particle speeds and their masses with respect to heliocentric distance, i.e. the level of cometary activity. This allowed us to derive a global and a local correlation of the dust particles’ speed distribution with respect to the H2O production rate.

NOMAD is a spectrometer suite: UV-visible-IR spectral ranges. NOMAD is part of the payload of ESA ExoMars Trace Gas Orbiter Mission. SINBAD boards are in charge of the communication and management of the power and control between the spacecraft and the instrument channels. SINBAD development took four years, while the entire development and test required five years, a very short time to develop an instrument devoted to a space mission. The hardware of SINBAD is shown in the attached poster: developed boards, prototype boards and final models. The models were delivered to the ESA in order to testing and integration with the spacecraft.

GIADA (Grain Impact Analyzer and Dust Accumulator) on-board the Rosetta space probe is designed to measure the momentum, mass and speed of individual dust particles escaping the nucleus of comet 67P/Churyumov-Gerasimenko (hereafter 67P). From 2014 August to 2016 June, Rosetta escorted comet 67P during its journey around the Sun. Here, we focus on GIADA data taken between 2015 January and 2016 February which included 67P's perihelion passage. To better understand cometary activity and more specifically the presence of dust structures in cometary comae, we mapped the spatial distribution of dust density in 67P's coma. In this manner, we could track the evolution of high-density regions of coma dust and their connections with nucleus illumination conditions, namely tracking 67P's seasons. We also studied the link between dust particle speeds and their masses with respect to heliocentric distance, i.e. the level of cometary activity. This allowed us to derive a global and a local correlation of the dust particles' speed distribution with respect to the H2O production rate.

NOMAD is a spectrometer suite: UV-visible-IR spectral ranges. NOMAD is part of the payload of ESA ExoMars Trace Gas Orbiter Mission. SINBAD boards are in charge of the communication and management of the power and control between the spacecraft and the instrument channels. SINBAD development took four years, while the entire development and test required five years, a very short time to develop an instrument devoted to a space mission. The hardware of SINBAD is shown in the attached poster: developed boards, prototype boards and final models. The models were delivered to the ESA in order to testing and integration with the spacecraft.

ABSTRACT The Rosetta probe, orbiting Jupiter-family comet 67P/Churyumov–Gerasimenko, has been detecting individual dust particles of mass larger than 10−10 kg by means of the GIADA dust collector and the OSIRIS Wide Angle Camera and Narrow Angle Camera since 2014 August and will continue until 2016 September. Detections of single dust particles allow us to estimate the anisotropic dust flux from 67P, infer the dust loss rate and size distribution at the surface of the sunlit nucleus, and see whether the dust size distribution of 67P evolves in time. The velocity of the Rosetta orbiter, relative to 67P, is much lower than the dust velocity measured by GIADA, thus dust counts when GIADA is nadir-pointing will directly provide the dust flux. In OSIRIS observations, the dust flux is derived from the measurement of the dust space density close to the spacecraft. Under the assumption of radial expansion of the dust, observations in the nadir direction provide the distance of the particles by measuring their trail length, with a parallax baseline determined by the motion of the spacecraft. The dust size distribution at sizes >1 mm observed by OSIRIS is consistent with a differential power index of −4, which was derived from models of 67P’s trail. At sizes <1 mm, the size distribution observed by GIADA shows a strong time evolution, with a differential power index drifting from −2 beyond 2 au to −3.7 at perihelion, in agreement with the evolution derived from coma and tail models based on ground-based data. The refractory-to-water mass ratio of the nucleus is close to six during the entire inbound orbit and at perihelion.

The Grain Impact Analyzer and Dust Accumulator (GIADA) instrument on board ESA’s Rosetta mission is constraining the origin of the dust particles detected within the coma of comet 67 P/Churyumov–Gerasimenko (67P). The collected particles belong to two families: (i) compact particles (ranging in size from 0.03 to 1 mm), witnessing the presence of materials that underwent processing within the solar nebula and (ii) fluffy aggregates (ranging in size from 0.2 to 2.5 mm) of sub-micron grains that may be a record of a primitive component, probably linked to interstellar dust. The dynamics of the fluffy aggregates constrain their equivalent bulk density to <1kg m. These aggregates are charged, fragmented, and decelerated by the spacecraft negative potential and enter GIADA in showers of fragments at speeds<1m s. The density of such optically thick aggregates is consistent with the low bulk density of the nucleus. The mass contribution of the fluffy aggregates to the refractory component of the nucleus is negligible and their coma brightness contribution is less than 15%.

The Grain Impact Analyzer and Dust Accumulator (GIADA) instrument on board ESA’s Rosetta mission is constraining the origin of the dust particles detected within the coma of comet 67 P/Churyumov–Gerasimenko (67P). The collected particles belong to two families: (i) compact particles (ranging in size from 0.03 to 1 mm), witnessing the presence of materials that underwent processing within the solar nebula and (ii) fluffy aggregates (ranging in size from 0.2 to 2.5 mm) of sub-micron grains that may be a record of a primitive component, probably linked to interstellar dust. The dynamics of the fluffy aggregates constrain their equivalent bulk density to < 1 ?> kg m−3. These aggregates are charged, fragmented, and decelerated by the spacecraft negative potential and enter GIADA in showers of fragments at speeds < 1 ?> m s−1. The density of such optically thick aggregates is consistent with the low bulk density of the nucleus. The mass contribution of the fluffy aggregates to the refractory component of the nucleus is negligible and their coma brightness contribution is less than 15%.

Context. During the period between 15 September 2014 and 4 February 2015, the Rosetta spacecraft accomplished the circular orbit phase around the nucleus of comet 67P/Churyumov-Gerasimenko (67P). The Grain Impact Analyzer and Dust Accumulator (GIADA) onboard Rosetta monitored the 67P coma dust environment for the entire period. Aims. We aim to describe the dust spatial distribution in the coma of comet 67P by means of in situ measurements. We determine dynamical and physical properties of cometary dust particles to support the study of the production process and dust environment modification. Methods. We analyzed GIADA data with respect to the observation geometry and heliocentric distance to describe the coma dust spatial distribution of 67P, to monitor its activity, and to retrieve information on active areas present on its nucleus. We combined GIADA detection information with calibration activity to distinguish different types of particles that populate the coma of 67P: compact particles and fluffy porous aggregates. By means of particle dynamical parameters measured by GIADA, we studied the dust acceleration region. Results. GIADA was able to distinguish different types of particles populating the coma of 67P: compact particles and fluffy porous aggregates. Most of the compact particle detections occurred at latitudes and longitudes where the spacecraft was in view of the comet’s neck region of the nucleus, the so-called Hapi region. This resulted in an oscillation of the compact particle abundance with respect to the spacecraft position and a global increase as the comet moved from 3.36 to 2.43 AU heliocentric distance. The speed of these particles, having masses from 10−10 to 10−7 kg, ranged from 0.3 to 12.2 m s−1. The variation of particle mass and speed distribution with respect to the distance from the nucleus gave indications of the dust acceleration region. The influence of solar radiation pressure on micron and submicron particles was studied. The integrated dust mass flux collected from the Sun direction, that is, particles reflected by solar radiation pressure, was three times higher than the flux coming directly from the comet nucleus. The awakening 67P comet shows a strong dust flux anisotropy, confirming what was suggested by on-ground dust coma observations performed in 2008.

Della Corte, V.; Rotundi, A.; Accolla, M.; Sordini, R.; Palumbo, P.; Colangeli, L.; Lopez-Moreno, J. J.; Rodriguez, J.; Rietmeijer, F. J. M.; Ferrari, M.; Lucarelli, F.; Mazzotta Epifani, E.; Ivanovski, S.; Aronica, A.; Cosi, M.; Bussoletti, E.; Crifo, J. F.; Esposito, F.; Fulle, M.; Green, S. F.; Gruen, E.; Herranz, M. L.; Jeronimo, J. M.; Lamy, P.; Lopez Jimenez, A.; McDonnell, J. A. M.; Mennella, V.; Molina, A.; Morales, R.; Moreno, F.; Palomba, E.; Perrin, J. M.; Rodrigo, R.; Weissman, P.; Zakharov, V. and Zarnecki, J. C. (2014). GIADA: its status after the Rosetta cruise phase and on-ground activity in support of the encounter with comet 67P/Churyumov-Gerasimenko. Journal of Astronomical Instrumentation, 3(1), article no. 1350011.

GIADA (Grain Impact Analyser and Dust Accumulator) on-board the Rosetta mission to comet 67P/Churyumov-Gerasimenko was designed to study the physical and dynamical properties of dust particles ejected by the comet during the encounter. In this paper we report the results of the analysis of data collected by GIADA during the past seven years of the cruise phase. During this period the GIADA detection subsystems were switched on for periodic in-flight payload checkouts to monitor their state-of-health including potential changes in its performance that could affect its data collection. Only slight variations in sensitivity and dynamical range were identified that will not affect the GIADA measurement capability during the Rosetta comet encounter and rendezvous phase. The GIADA microbalance system detected the presence of low-volatility material over a period of about 169 days when the GIADA cover remained partially opened. It is highly probable that this material originated from the spacecraft itself, as a spacecraft's outgassing was observed by the ROSINA mass spectrometer (on-board Rosetta) during the cruise phase. The identification of the low-volatility mass deposited on the microbalances as self-contamination will allow us to evaluate the mass rate background to be subtracted from the GIADA science data. These results obtained from GIADA cruise data analysis coupled with laboratory calibration data obtained from measurements using the GIADA spare model for selected cometary dust analogs will be the basis for the interpretation of the GIADA scientific data.

Background: The study of airborne dust and water vapor properties at the Martian surface level is an important task for the achievement of some of the primary scientific goals of Mars exploration: to study the water cycle and present / past habitability, climate history and hazardous conditions. Method: The MEDUSA instrument has been designed for the direct in situ measurement of dust and water vapor properties, such as dust size distribution, number density, deposition rate and electrification, and water vapor abundance. Conclusion: The MEDUSA instrument reached a Technical Readiness Level > 5 within the ESA ExoMars mission development and it is well suited to be accommodated on landers and rovers for Mars exploration.

The Imaging Magnetograph eXperiment (IMaX) is a spectropolarimeter built by four institutions in Spain that flew on board the Sunrise balloon-borne telesocope in June 2009 for almost six days over the Arctic Circle. As a polarimeter IMaX uses fast polarization modulation (based on the use of two liquid crystal retarders), real-time image accumulation, and dual beam polarimetry to reach polarization sensitivities of 0.1%. As a spectrograph, the instrument uses a LiNbO3 etalon in double pass and a narrow band pre-filter to achieve a spectral resolution of 85 mAA. IMaX uses the high Zeeman sensitive line of Fe I at 5250.2 AA and observes all four Stokes parameters at various points inside the spectral line. This allows vector magnetograms, Dopplergrams, and intensity frames to be produced that, after reconstruction, reach spatial resolutions in the 0.15-0.18 arcsec range over a 50x50 arcsec FOV. Time cadences vary between ten and 33 seconds, although the shortest one only includes longitudinal polarimetry. The spectral line is sampled in various ways depending on the applied observing mode, from just two points inside the line to 11 of them. All observing modes include one extra wavelength point in the nearby continuum. Gauss equivalent sensitivities are four Gauss for longitudinal fields and 80 Gauss for transverse fields per wavelength sample. The LOS velocities are estimated with statistical errors of the order of 5-40 m/s. The design, calibration and integration phases of the instrument, together with the implemented data reduction scheme are described in some detail.

The Huygens Probe measured the electrical conductivity of Titan atmosphere from about 140 km down to the surface, employing relaxation and mutual impedance techniques. Previous analyses have shown some differences on the conductivity measurements obtained with two independent sensors-relaxation probe (RP) and mutual impedance probe (MIP). A 20-fold maximum discrepancy occurred around the conductivity peak at 60-70 km. To understand the nature of such discrepancy, we reassess the RP data by taking into account a geometrical factor related to the electrode finite size and the Debye length of the ionized medium. The present analysis implies replacing the standard Laplace field distribution by a more elaborated model considering the Poisson equation and the resistance between the RP electrodes and the medium. Although a complete understanding of the conductivity profile is still missing, this work brings RP and MIP data to a much better agreement. The conductivity maximum difference derived from the two sensors is now lower a factor of 2. This reassessment is also useful for future instruments and missions. (C) 2010 Elsevier Ltd. All rights reserved.

We present a new apparatus for measuring the complete scattering matrix as a function of the scattering angle of dust irregular particles. The design is based on the well-known apparatus located in Amsterdam, The Netherlands. In this improved version we have extended the scattering angle ranging from 3° to 177°. Moreover, the measurements are performed with a tunable argon–krypton laser that emit at a wavelength (λ) of 483, 488, 520, 568, or 647 nm. The apparatus has been developed at the Instituto de Astrofísica de Andalucía (IAA), Granada, Spain. To measure the scattering matrix elements we use a number of different optical components such as polarizers, a quarter-wave plate, and an electro-optic modulator. These components are used to manipulate the polarization state of light. By using eight different combinations for the orientation angles of the optical components, all scattering matrix elements are obtained as functions of the scattering angle. The accuracy of the instrument is tested by comparing the measured scattering matrices of water droplets at 488, 520, and 647 nm with Lorenz–Mie calculations for a distribution of homogeneous water droplets.

Some of the secrets of the atmosphere of Titan have been unveiled by the Huygens Probe. The Permitivity Wave and Altimetry system detected a hidden ionosphere much below the main ionosphere, that lies between 600 and 2000 km. Theoretical models predicted a low altitude ionosphere produced by cosmic rays that, contrary to magnetospheric particles and UV photons, are able to penetrate down in the atmosphere. Two sensors: Mutual Impedance (MI) and Relaxation Probe (RP) measured the conductivity of the ionosphere by two different methods and were able to discriminate the two branches of electrical conductivity due to the positive and negative charges. The measurements were made from 140 to 40 km and show a maximum of charge densities ≈2 × 10 9 m −3 positive ions and ≈450 × 10 6 m −3 electrons at around 65 km. Here we present the altitude distribution of the concentration of positive ions and electrons obtained from the RP and MI sensors.

The Grain Impact Analyser and Dust Accumulator (GIADA) onboard the ROSETTA mission to comet 67P/Churyumov–Gerasimenko is devoted to study the cometary dust environment. Thanks to the rendezvous configuration of the mission, GIADA will be plunged in the dust environment of the coma and will be able to explore dust flux evolution and grain dynamic properties with position and time. This will represent a unique opportunity to perform measurements on key parameters that no ground-based observation or fly-by mission is able to obtain and that no tail or coma model elaborated so far has been able to properly simulate. The coma and nucleus properties shall be, then, clarified with consequent improvement of models describing inner and outer coma evolution, but also of models about nucleus emission during different phases of its evolution. GIADA shall be capable to measure mass/size of single particles larger than about 15 μm together with momentum in the range 6.5 × 10−10 ÷ 4.0 × 10−4 kg m s−1 for velocities up to about 300 m s−1. For micron/submicron particles the cumulative mass shall be detected with sensitivity 10−10 g. These performances are suitable to provide a statistically relevant set of data about dust physical and dynamic properties in the dust environment expected for the target comet 67P/Churyumov–Gerasimenko. Pre-flight measurements and post-launch checkouts demonstrate that GIADA is behaving as expected according to the design specifications.

The propagation of extremely low frequency (ELF) electromagnetic waves in the Earth's ionospheric cavity and the associated resonance phenomena have been extensively studied, in relation with lightning activity. We perform a similar investigation for Titan, the largest moon of Saturn. There are important differences between Earth and Titan, as far as the cavity geometry, the atmospheric electron density profile, and the surface conductivity are concerned. We present an improved 3D finite element model that provides an estimate of the lowest eigenfrequencies, associated quality factors (Q-factors), and ELF electric field spectra. The data collected by the electric antenna of the Permittivity, Waves, and Altimetry (PWA) instrument reveals the existence of a narrow-band signal at about 36Hz during the entire descent of Huygens upon Titan. We assess the significance of these measurements against the model predictions, with due consideration to the experimental uncertainties.