Functionalization and precise modulation of the electronic properties of graphene are key processes in the development of new applications of this promising material. This study examines the potential of using organic polycations as p-dopants and/or anchoring motifs for non-covalent functionalization. A library of hybrid materials was prepared through wet-chemical non-covalent functionalization. Both chemical vapor deposition graphene and reduced graphene oxide were functionalized with a series of neutral and polycationic benzimidazole-based systems. We report on how both the number of anions and the size, shape, and magnitude of the positive charge of the benzimidazole-based systems cooperatively affect the redox properties as well as the affinity for and the nature of bonding to graphene. The redox properties of the benzimidazole-based systems were studied by cyclic voltammetry. The functionalized graphene materials were characterized by Raman spectroscopy, X-ray photoelectron spectroscopy, and time-of-flight secondary ion mass spectrometry. Density functional theory calculations were performed to make contact between the experimental results obtained for molecular samples and hybrid materials. No universal dependence of the binding affinity on a single parameter, such as the amount of positive charge or the size of the system, was found. Instead, the cooperative effect of the three-dimensional structure of the benzimidazole-based systems and the number of anions was found to play a pivotal role. Together, these parameters determine the degree of partial electron sharing and magnitude of dispersion forces involved in the binding of members of this family of benzimidazole-based systems to graphene.

Novel approaches to modify the spectral output of the sun have seen a surge in interest recently, with triplet-triplet annihilation driven photon upconversion (TTA-UC) gaining widespread recognition due to its ability to function under low-intensity, noncoherent light. Herein, four diphenylanthracene (DPA) dimers are investigated to explore how the structure of these dimers affects upconversion efficiency. Also, the mechanism responsible for intramolecular upconversion is elucidated. In particular, two models are compared using steady-state and time-resolved simulations of the TTA-UC emission intensities and kinetics. All dimers perform TTA-UC efficiently in the presence of the sensitizer platinum octaethylporphyrin. The meta-coupled dimer 1,3-DPA(2) performs best yielding a 21.2% upconversion quantum yield (out of a 50% maximum), which is close to that of the reference monomer DPA (24.0%). Its superior performance compared to the other dimers is primarily ascribed to the longer triplet lifetime of this dimer (4.7 ms), thus reinforcing the importance of this parameter. Comparisons between simulations and experiments reveal that the double-sensitization mechanism is part of the mechanism of intramolecular upconversion and that this additional pathway could be of great significance under specific conditions. The results from this study can thus act as a guide not only in terms of annihilator design but also for the design of future solid-state systems where intramolecular exciton migration is anticipated to play a major role.

Herein we present two-colour photoswitching in a photoresponsive thin film based on a Ru-sulfoxide complex immobilized onto a ZrO2 surface.

Singlet fission has emerged as a promising way to overcome the Shockley-Queisser limit in solar energy conversion devices, and a few studies have claimed proof-of-principle results using dye-sensitized photoelectrodes. However, a detailed understanding of what factors govern the fate of the excited state on mesoporous surfaces is still lacking. Here, we have studied how the excitation progresses into singlet fission, electron injection, or formation of molecular charge separated states in diphenylisobenzofuran derivatives with flexible carbon linkers attached to nanocrystalline mesoporous ZrO2, TiO2, and SnO2 thin films. We show that singlet fission occurs for the molecule attached to ZrO2 films when the assembly is immersed in nonpolar solvents, and that singlet fission is hampered by the formation of a molecular charge separated state in more polar solvents. On TiO2 surfaces, direct electron injection from the singlet excited state outcompetes the singlet fission. Instead, triplet formation occurs via charge recombination from the conduction band of TiO2 in nonpolar solvents. When the molecule is attached to SnO2 films, singlet fission partly outcompetes electron injection from the singlet excited state and the two processes occur in parallel. Subsequent to singlet fission on SnO2, triplet injection into the conduction band of SnO2 is observed. The results presented here provide a detailed picture of the singlet fission dynamics in molecules attached to mesoporous semiconductor surfaces, demonstrating that both the semiconductor substrate as well as the environment around the molecules have a large impact, which can be useful in the design of future devices.

Hybridizing graphene and molecules possess a high potential for developing materials for new applications. However, new methods to characterize such hybrids must be developed. Herein, the wet-chemical non-covalent functionalization of graphene with cationic pi-systems is presented and the interaction between graphene and the molecules is characterized in detail. A series of tricationic benzimidazolium salts with various steric demand and counterions was synthesized, characterized and used for the fabrication of graphene hybrids. Subsequently, the doping effects were studied. The molecules are adsorbed onto graphene and studied by Raman spectroscopy, XPS as well as ToF-SIMS. The charged pi-systems show a p-doping effect on the underlying graphene. Consequently, the tricationic molecules are reduced through a partial electron transfer process from graphene, a process which is accompanied by the loss of counterions. DFT calculations support this hypothesis and the strong p-doping could be confirmed in fabricated monolayer graphene/hybrid FET devices. The results are the basis to develop sensor applications, which are based on analyte/molecule interactions and effects on doping.

Nine metal–organic frameworks have been prepared with the hexagon-shaped linker 1,2,3,4,5,6-hexakis(4-carboxyphenyl)benzene (H6cpb) by solvothermal reactions in dimethylformamide (dmf) or dimethylacetamide (dmac) with acetic acid or formic acid as modulators: [Bi2(cpb)(acetato)2(dmf)2]·2dmf CTH-6 forms a rtl-net; 2(H2NMe2)[Cu2(cpb)] CTH-7 forms a kgd-net; [Fe4(cpb)(acetato)2(dmf)4] CTH-8 and [Co4(cpb)(acetato)2(dmf)4] CTH-9 are isostructural and form yav-nets; 2(HNEt3)[Fe2(cpb)] CTH-10 and the two polymorphs of 2(H2NMe2)[Zn2(cpb)]·1.5dmac, Zn-MOF-888 and CTH-11, show kgd-nets; [Cu2(cpb)(acetato)2(dmf)2]·2dmf, CTH-12, forms a mixed coordination and hydrogen-bonded sql-net; and 2(H2NMe2)[Zn2(cpb)] CTH-13, a similarly mixed yav-net. Surface area values (Brunauer–Emmett–Teller, BET) range from 34 m2 g–1 for CTH-12 to 303 m2 g–1 for CTH-9 for samples activated at 120 °C in dynamic vacuum. All compounds show normal (10-fold higher) molar CO2 versus N2 uptake at 298 K, except the 19-fold CO2 uptake for CTH-12 containing Cu(II) dinuclear paddle-wheels. We also show how perfect hexagons and triangles can combine to a new 3D topology laf, a model of which gave us the idea of foldable network topologies, as the laf-net can fold into a 2D form while retaining the local geometry around each vertex. Other foldable nets identified are cds, cds-a, ths, sqc163, clh, jem, and tfc covering the basic polygons and their combinations. The impact of this concept on “breathing” MOFs is discussed. I2 sorption, both from gas phase and from MeOH solution, into CTH-7 were studied by time of flight secondary ion mass spectrometry (ToF-SIMS) on dried crystals. I2 was shown to have penetrated the crystals, as layers were consecutively peeled off by the ion beam. We suggest ToF-SIMS to be a method for studying sorption depth profiles of MOFs.

The Aurora family of kinases is closely involved in regulating cell division. Inhibition of Aurora A and B with small molecules is currently being investigated in clinical trials for the treatment of different cancers. It has also been evaluated as a treatment option against different autoimmune diseases in preclinical studies. Here, we present a cyclopenta[b]indole derivative capable of inhibiting Aurora B selectively in kinase assays. To evaluate the Aurora B inhibition capacity of the compound, we used a kinase IC50 assay as well as a suppression assay of proliferating primary cells. In addition, we examined if the cells had gained a phenotype characteristic for Aurora B inhibition after treatment with the compound. We found that the compound selectively inhibited Aurora B (IC50 = 1.4 μM) over Aurora A (IC50 > 30 μM). Moreover, the compound inhibited proliferating PBMCs with an IC50 = 4.2 μM, and the cells displayed reduced phosphorylation of histone H3 as well as tetraploidy, consistent with Aurora B inhibition.

The triplet pair is the key functional unit in triplet-triplet annihilation photon upconversion. The same molecular properties that stabilize the triplet pair also allow dimers to form on the singlet energy surface, creating an unwanted energy relaxation pathway. Here we show that excimer formation most likely is a consequence of a triplet dimer formed before the annihilation event. Polarity-dependent studies were performed to elucidate how to promote wanted emission pathways over excimer formation. Furthermore, we show that the yield of triplet-triplet annihilation is increased in higher-viscosity solvents. The results will bring new insights in how to increase the upconversion efficiency and how to avoid energy-loss channels.

The analysis of small polar compounds with ToF-SIMS and MALDI-ToF-MS have been generally hindered by low detection sensitivity, poor ionization efficiency, ion suppression, analyte in-source fragmentation, and background spectral interferences from either a MALDI matrix and/or endogenous tissue components. Chemical derivatization has been a well-established strategy for improved mass spectrometric detection of many small molecular weight endogenous compounds in tissues. Here, we present a devised strategy to selectively derivatize and sensitively detect catecholamines with both secondary ion ejection and laser desorption ionization strategies, which are used in many imaging mass spectrometry (IMS) experiments. Chemical derivatization of catecholamines was performed by a reaction with a synthesized permanent pyridinium-cation-containing boronic acid molecule, 4-( N-methyl)pyridinium boronic acid, through boronate ester formation (boronic acid-diol reaction). The derivatization facilitates their sensitive detection with ToF-SIMS and LDI-ToF mass spectrometric techniques. 4-( N-Methyl)pyridinium boronic acid worked as a reactive matrix for catecholamines with LDI and improved the sensitivity of detection for both SIMS and LDI, while the isotopic abundances of the boron atom reflect a unique isotopic pattern for derivatized catecholamines in MS analysis. Finally, the devised strategy was applied, as a proof of concept, for on-tissue chemical derivatization and GCIB-ToF-SIMS (down to 3 μm per pixel spatial resolution) and LDI-ToF mass spectrometry imaging of dopamine, epinephrine, and norepinephrine in porcine adrenal gland tissue sections. MS/MS using collision-induced dissociation (CID)-ToF-ToF-SIMS was subsequently employed on the same tissue sections after SIMS and LDI mass spectrometry imaging experiments, which provided tandem MS information for the validation of the derivatized catecholamines in situ. This methodology can be a powerful approach for the selective and sensitive ionization/detection and spatial localization of diol-containing molecules such as aminols, vic-diols, saccharides, and glycans along with catecholamines in tissue sections with both SIMS and LDI/MALDI-MS techniques.

Almost 700 Swedish and South African students from the upper secondary school and first-term chemistry university level responded to our survey on concepts of chemical bonding. The national secondary school curricula and most common textbooks for both countries were also surveyed and compared for their content on chemical bonding. Notable differences between the countries were found in textbooks and in the curriculum regarding the topics of ionic bonding, bond energetics and use of the VSEPR model, the latter being absent in the Swedish curriculum and ionic bonding not explicitly mentioned in the South African curriculum. To some extent these differences are reflected in the students' responses to the survey. It is also clear that university teachers in both countries must prepare effective counter-measures against deep rooted misunderstandings. For the upper secondary school level it is suggested that the bond energetics and exothermic and endothermic reactions be clearly and carefully presented and separated as the study indicates that mixing of these two concepts is a major cause of confusion.

Design of Experiments (DoE) has been used to optimize a diversity oriented palladium catalyzed cascade Heck-Suzuki reaction for the construction of 3-alkenyl substituted cyclopenta[b]indole compounds. The obtained DoE model revealed a reaction highly dependent on the ligand. Guided by the model, an optimal ligand was chosen that selectively delivered the desired products in high yields. The conditions were applicable with a variety of boronic acids and were used to synthesize a library of 3-alkenyl derivatized compounds. Focusing on inhibition of kinases relevant for combating melanoma, the library was used in an initial structure-activity survey. In line with the observed kinase inhibition, cellular studies revealed one of the more promising derivatives to inhibit cell proliferation via an apoptotic mechanism.

As a part of their sun-protective strategy, cyanobacteria produce the natural UV-screener scytonemin. Its accumulation in the extracellular sheaths allows the bacteria to thrive in inhospitable locations highly exposed to solar radiation. Scytonemin is often referred to as photostable and has been reported to be non-fluorescent. Taken together, these properties indicate inherently fast non-radiative relaxation processes. Despite these interesting traits, the photophysics of scytonemin is as yet almost completely unexplored. In this study, we have compared the steady-state photophysics of scytonemin itself and four derivatives thereof. Furthermore, the in vitro photostability of scytonemin was studied in different solvents using a solar simulation system. Scytonemin and the investigated derivatives demonstrated a more rapid photoinduced decay in comparison with two commercial UV-screening agents. The photostability could be modulated by varying the solvent, with the protic solvent ethanol providing the most stabilizing environment.

Low aqueous solubility of porphyrin-based photosensitizers hampers their clinical use in photodynamic therapy because of complex delivery. In this study, we explore meso -tetra( m -hydroxyphenyl)-21,23 H -porphyrin ( m THPP), a potent photosensitizer, covalently attached to β-cyclodextrin (CD- m THPP) with a focus on topical delivery and cellular uptake. The photophysical properties of CD- m THPP were examined using steady-state fluorescence and lifetime measurements verifying increased aqueous solubility. Confocal and fluorescence lifetime imaging microscopy on human squamous carcinoma cells (A431) evidenced a cytoplasmic uptake of CD- m THPP in predominantly monomeric form. CD- m THPP was also delivered to human skin ex vivo and the skin penetration was assessed using two-photon fluorescence microscopy. The results indicated that CD- m THPP exhibits improved skin distribution compared to m THPP alone using aqueous vehicles. Thus the CD- m THPP conjugate demonstrates improved biodistribution ex vivo compared to m THPP and is a promising multimodal system for photodynamic therapy.

Photocontact allergy is a well-known side effect of topical preparations of the nonsteroidal anti-inflammatory drug ketoprofen. Photocontact allergy to ketoprofen appears to induce a large number of photocross allergies to both structurally similar and structurally unrelated compounds. Contact and photocontact allergies are explained by structural modification of skin proteins by the allergen. This complex is recognized by the immune system, which initiates an immune response. We have studied ketoprofen's interaction with amino acids to better understand ketoprofen's photoallergenic ability. Irradiation of ketoprofen and amino acid analogues resulted in four different ketoprofen photodecarboxylation products (6-9) together with a fifth photoproduct (5). Dihydroquinazoline 5 was shown to be a reaction product between the indole moiety of 3-methylindole (Trp analogue) and the primary amine benzylamine (Lys analogue). In presence of air, dihydroquinazoline 5 quickly degrades into stable quinazolinone 12. The corresponding quinazolinone (17) was formed upon irradiation of ketoprofen and the amino acids N-acetyl-l-Trp ethyl ester and l-Lys ethyl ester. The formation of these models of an immunogenic complex starts with the ketoprofen-sensitized formation of singlet oxygen, which reacts with the indole moiety of Trp. The formed intermediate subsequently reacts with the primary amino functionality of Lys, or its analogue, to form a Trp-Lys adduct or a mimic thereof. The formation of a specific immunogenic complex that does not contain the allergen but that can still induce photocontact allergy would explain the large number of photocross allergies with ketoprofen. These allergens do not have to be structurally similar as long as they can generate singlet oxygen. To the best of our knowledge, there is no other suggested explanation for ketoprofen's photoallergenic properties that can account for the observed photocross allergies. The formation of a specific immunogenic complex that does not contain the allergen is a novel hypothesis in the field of contact and photocontact allergy.

Octocrylene is an organic UV filter, commonly used in sunscreens and cosmetics, which can give rise to both contact and photocontact allergy. Our aim was to investigate octocrylenes interaction with amino acid analogs in the presence of UV radiation to better understand the reason for octocrylenes photoallergenic capacity. The amino acid analogs were photolysed in presence and absence of octocrylene for 1 h in cyclohexane. The rate of degradation was considerably slower for all amino acid analogs when octocrylene was present in the mixture. Benzylamine, the lysine analog, did react with octocrylene during the photolysis and the corresponding amide was formed in an acylation reaction. By varying the benzylamine concentration and keeping the octocrylene concentration fixed the reaction rate was shown to be independent of the amine concentration. The same type of acylation reaction took place when octocrylene alone was photolysed in ethanol in which the ethyl ester was formed from octocrylene and ethanol. Our results suggest that octocrylenes ability to cause photocontact allergy could be due to its photoinduced reactivity toward primary amines and alcohols.

The first total synthesis of the mitotic spindle poison nostodione A is described. The inherent oxidative sensitivity of indoles is utilized for a late introduction of a second carbonyl to the cyclopent[b]indole-2-one system. The tricyclic system is prepared from indole-3-acetic acid and O-silylated 4-ethynylphenol, using a stereoselective intramolecular reductive Heck cyclization as the key transformation.

Background. Reports of positive patch test and photopatch test reactions to the chemical ultraviolet filter octocrylene have increased during the last decade. Little is known about the reason for octocrylene's allergenic activity.Objectives. To present and discuss the results of patch tests and photopatch tests with octocrylene, and to investigate the possible cause of its allergenic properties.Methods. Results of patch tests and photopatch tests with octocrylene in patients with adverse skin reactions to sunscreen products and/or ketoprofen were collected. The allergenic potency of octocrylene was investigated in the murine local lymph node assay (LLNA). Chemical reactivity assays were used to mimic octocrylene's interaction with biomolecules.Results. We report 23 cases of positive test reactions to octocrylene (5 patch test and 18 photopatch). Notably, many of these patients also had positive photopatch test reactions to ketoprofen and benzophenone-3. Octocrylene was shown to be a moderate sensitizer in the LLNA, and it reacted with amines such as lysine, but not with thiols such as cysteine.Conclusions. The clinical studies show that octocrylene is both a photocontact allergen and a contact allergen. Octocrylene's ability to cause contact allergy is probably attributable to its reactivity towards lysine. To be able to understand why octocrylene causes photocontact allergy, further studies are needed.

A binding pocket consisting of two zinc porphyrins self assembled by Watson-Crick base pairing is presented. The porphyrin binding pocket is located in the confined environment of a lipid membrane whereas the DNA is located in the water phase. Bidentate electron accepting ligands are shown to coordinate in-between the two porphyrins.

The first total synthesis of the dimeric alkaloid pigment scytonemin is described. The key transformations In Its synthesis from 3-indole acetic acid are a Heck carbocyclization and a Suzuki-Miyaura cross-coupling, orchestrated In a stereospecific tandem fashion, followed by a biosynthetically inspired oxidative dimerization. The tandem sequence generates a tetracyclic (E)-3-(arylidene)-3,4-dihydrocyclopenta[b]indol-2(1H)-one that is subsequently dimerized into the unique homodimeric core structure of scytonemin.