Active galactic nuclei (AGNs) are a key component of galaxy evolution due to feedback on the host from its supermassive black hole. The morphology of warm, in- and outflowing dusty material can reveal the nature of the onset of feedback, AGN feeding, and the unified model of AGN. Here we use the Large Binocular Telescope Interferometer (LBTI) to image the dense, obscuring disk and extended dusty outflow region of NGC 1068. In Fizeau imaging mode the LBTI synthesizes the equivalent resolution of a 22.8 m telescope. The 8.7 μm Fizeau images of NGC 1068 have an effective resolution of 47×90 mas (3.3×6.2 pc) in a 5" field of view after performing PSF deconvolution techniques described here. This is the only extragalactic source to be Fizeau imaged using the LBTI, and the images bridge the scales measured with the Very Large Telescope Interferometer (VLTI; 0.5-5 pc) and those of single telescopes such as JWST and Keck (>15 pc). The images detect and spatially resolve the low surface brightness mid-infrared (MIR) features in the AGN disk/wind region that are over-resolved by the VLTI. The images show strong correlation between MIR dust emission and near-infrared (NIR) emission of highly excited atomic lines observed by SINFONI. Such LBTI imaging is a precursor to infrared imaging using the upcoming generation of extremely large telescopes, with angular resolutions up to 6x better than JWST, the largest space telescope in orbit.

The Large Binocular Telescope Interferometer (LBTI) is a strategic instrument which combines the two 8.4m apertures of the LBT for sensitive, high-angular-resolution imaging and interferometric observations in the thermal infrared. Through its observing modes utilizing adaptive optics, Fizeau imaging, and nulling interferometry, the LBTI is in many respects the first ELT; it serves as a pioneer for upcoming ELTs in terms of both science and instrumentation. LBTI has completed a large survey for habitable-zone dust around main sequence stars, exploiting its angular resolution to obtain 100x better sensitivity than space-based photometric observations. Recently we have emphasized Fizeau imaging, supporting high-contrast and precision-astrometric observations. We obtained the first extragalactic and N band observations in this mode, demonstrating high-fidelity, high-sensitivity imaging on a 23 m baseline. We are now pushing to image the first rocky planet in the habitable zone around a nearby Sun-like star. In this paper we present an overview of the LBTI's design and capabilities as a 23 m telescope. In particular, we focus on open loop Fizeau imaging, presenting the state of the art. We measure the stability of the Fizeau PSF, test frame selection criteria, and demonstrate PSF deconvolution. Finally, we outline future developments and synergies with current and upcoming facilities.

SHARK-VIS, the Large Binocular Telescope (LBT) optical high-contrast imager, had its first light in October 2023. Thanks to the high performance of the refurbished LBT adaptive optics system SOUL, SHARK-VIS extends the capabilities of one arm of the LBT telescope down to 400nm, delivering images with a spatial resolution in the order of 20 mas, which in the infrared bands will be achieved only by future Extremely Large Telescopes. This document reports the instrument's preliminary performance on-sky, which confirms that SHARK-VIS is ready for its main science applications. Specifically, we will show that the instrument is able to provide views of minor bodies and satellites in the Solar System with an unprecedented level of detail and that it achieves contrasts of the order 1e-4 with its H-alpha filter (1nm FWHM) at 150 mas separation from a mag G14 star, even under non-optimal weather conditions.

The MMT Adaptive Optics exoPlanet Characterization System (MAPS) is a comprehensive update to the first generation MMT adaptive optics system (MMTAO), designed to produce a facility class suite of instruments whose purpose is to image nearby exoplanets. The system's adaptive secondary mirror (ASM), although comprised in part of legacy components from the MMTAO ASM, represents a major leap forward in engineering, structure and function. The subject of this paper is the design, operation, achievements and technical issues of the MAPS adaptive secondary mirror. We discuss laboratory preparation for on-sky engineering runs, the results of those runs and the issues we discovered, what we learned about those issues in a follow-up period of laboratory work, and the steps we are taking to mitigate them.

The MMT Adaptive optics exoPlanet characterization System (MAPS) is an exoplanet characterization program that encompasses instrument development, observational science, and education. The instrument we are developing for the 6.5m MMT observatory is multi-faceted, including a refurbished 336-actuator adaptive secondary mirror (ASM); two pyramid wavefront sensors (PyWFS's); a 1-kHz adaptive optics (AO) control loop; a high-resolution and long-wavelength upgrade to the Arizona infraRed Imager and Echelle Spectrograph (ARIES); and a new-AO-optimized upgrade to the MMT-sensitive polarimeter (MMT-Pol). With the completed MAPS instrument, we will execute a 60-night science program to characterize the atmospheric composition and dynamics of ~50-100 planets around other stars. The project is approaching first light, anticipated for Summer/Fall of 2022. With the electrical and optical tests complete and passing the review milestone for the ASM’s development, it is currently being tuned. The PyWFS's are being built and integrated in their respective labs: the visible-light PyWFS at the University of Arizona (UA), and the infrared PyWFS at the University of Toronto (UT). The top-level AO control software is being developed at UA, with an on-sky calibration algorithm being developed at UT. ARIES development continues at UA, and MMT-Pol development is at the University of Minnesota. The science and education programs are in planning and preparation. We will present the design and development of the entire MAPS instrument and project, including an overview of lab results and next steps.

We are upgrading and refurbishing the first-generation adaptive-secondary mirror (ASM)-based AO system on the 6.5-m MMT in Arizona, in an NSF MSIP-funded program that will create a unique facility specialized for exoplanet characterization. This update includes a third-generation ASM with embedded electronics for low power consumption, two pyramid wavefront sensors (optical and near-IR), and an upgraded ARIES science camera for high-resolution spectroscopy (HRS) from 1-5 μm and MMT-POL science camera for sensitive polarization mapping. Digital electronics have been incorporated into each of the 336 actuators, simplifying hub-level electronics and reducing the total power to 300 W, down from 1800 W in the legacy system — reducing cooling requirements from active coolant to passive ambient cooling. An improved internal control law allows for electronic damping and a faster response. The dual pyramid wavefront sensors allow for a choice between optical or IR wavefront sensing depending on guide star magnitude, color, and extinction. The HRS upgrade to ARIES enables crosscorrelation of molecular templates to extract atmospheric parameters of exoplanets. The combination of these upgrades creates a workhorse instrument for exoplanet characterization via AO and HRS to separate planets from their host stars, with broad wavelength coverage and polarization to probe a range of molecular species in exoplanet atmospheres.

The MMT Adaptive optics exoPlanet characterization System (MAPS) is a broad overhaul and upgrade of AO instrumentation at the 6.5-m MMT observatory, from deformable secondary mirror, through pyramid wavefront sensors in both the visible and near-infrared, to improved science cameras. MAPS is an NSF MSIP-funded program whose ultimate goal is a facility optimized for exoplanet characterization. Here we describe the laboratory testing and calibration of one MAPS component: the refurbished MMT adaptive secondary mirror (ASM). The new ASM includes a complete redesign of electronics and actuators, including simplified hub-level electronics and digital electronics incorporated into the actuators themselves. The redesign reduces total power to ⪅300W, from the original system’s 1800W, which in turn allows us to eliminate liquid cooling at the hub with no loss of performance. We present testing strategies, results, and lessons learned from laboratory experience with the MAPS ASM. We discuss calibrations first on the level of individual actuators, including capacitive position sensing, force response function, and individual closed-loop position control with an improved control law. We then describe investigations into the full ASM system – hub, actuators, thin shell, and human – to understand how to optimize interactions between components for dynamical shape control using a feedforward matrix. Finally, we present our results in the form of feedforward matrix and control law parameters that successfully produce a desired mirror surface within 1ms settling time.

MAPS, MMT Adaptive optics exoPlanet characterization System, is the upgrade of legacy 6.5m MMT adaptive optics system. It is an NSF MSIP-funded project that includes (i) refurbishing of the MMT Adaptive Secondary Mirror (ASM), (ii) new high sensitive and high spatial order visible and near-infrared pyramid wavefront sensors, and (iii) the upgrade of Arizona Infrared Imager and Echelle Spectrograph (ARIES) and MMT high Precision Imaging Polarimeter (MMTPol) science cameras. This paper will present the design and development of the visible pyramid wavefront sensor. This system consists of an acquisition camera, a fast-steering tip-tilt modulation mirror, a double pyramid, a pupil imaging triplet lens, and a low noise and high-speed frame rate based CCID75 camera. We will report on hardware and software and present the laboratory characterization results of the individual subsystems, and outline the on-sky commissioning plan.