A major challenge hampering the industrial and biological exploitation of lipases is the self-limiting effect of the lipolytic reaction. Defying sustained attention throughout history, the influence of lipase catalysed lipolysis on the internal structure of thin triglyceride films has proved elusive. An in-depth understanding of the lipolysis process at the triglycerides/aqueous interface will assist in creating innovative methods to enhance yields. This study furthers our understanding of the influence of solution pD (pH equivalent for aqueous solutions prepared with D2O) on the effect of lipolysis on the structure of thin triolein films. All experiments were performed at pD 7.0 or pD 8.5, either side of the apparent pKa of the primary product of the hydrolysis (oleic acid/oleate). Spectroscopic ellipsometry measurements were employed to kinetically track the changes in thickness of the triolein film after the introduction of 2 ppm Thermomyces lanuginosus lipase (TLL). Neutron reflectometry experiments revealed the internal structure of the thin films before and after TLL digestion, while fast kinetic measurements capturing changes to the reflectivity profile throughout lipolysis. Both techniques revealed significant variations in the physical properties and enzymatic conversion of the triolein films between pD 7.0 and pD 8.5.

Laccases are multicopper oxidases (MCOs) that play a crucial role in the degradation of lignin and carbon recycling carried out by basidiomycete fungi in nature, and have the highest number of applications reported to date among oxidoreductases. However, very little is known about their natural evolution, the study of which could reveal unknown structure-function relationships and guide laccase engineering. By using ancestral sequence reconstruction and structural and biochemical characterization of the resurrected ancestral enzymes, we disclosed the key evolutionary events that modified the architecture of the active site in MCOs, leading to the emergence of laccases for lignin degradation in nature. We analyzed the evolutionary trajectory of basidiomycete laccases by obtaining the ancestors of four MCO groups, including laccases sensu stricto and three types of laccase-like enzymes that we recently described. The ancestor of each group was expressed in S. cerevisiae and preliminary characterized, showing noticeable differences among them in activity, stability, and architecture of their catalytic pockets. The ancestral laccase sensu stricto outperformed the other ancestral enzymes in the activity levels secreted by the yeast, stability, and capability to oxidize all tested substrates. It was therefore expressed in Aspergillus oryzae at high yield and characterized in depth, including the resolution of its crystal structure at 1.54 & Aring;. The enzyme showed a wide substrate promiscuity, oxidizing a variety of phenols, aryl amines, and N-heterocycles, including certain synthetic organic dyes and redox mediators with high oxidation potentials. The ancestral laccase also oxidized polymeric lignin, in contrast to the other ancestral enzymes, and it was able to oxidize the monomer of polystyrene via the laccase-mediator system. All these properties make this resurrected enzyme a promising starting point for engineering to address urgent biotechnological challenges such as the enzymatic valorization and upcycling of natural and synthetic polymers.

Multi-copper oxidases (MCO) share a common molecular architecture and the use of copper ions as cofactors to reduce O2 to H2O, but show high sequence heterogeneity and functional diversity. Many new emerging MCO genes are wrongly annotated as laccases, the largest group of MCOs, with the widest range of biotechnological applications (particularly those from basidiomycete fungi) due to their ability to oxidise aromatic compounds and lignin. Thus, comprehensive studies for a better classification and structure-function characterisation of MCO families are required. Laccase-ferroxidases (LAC-FOXs) constitute a separate and unexplored group of MCOs with proposed dual features between laccases and ferroxidases. We aim to better define this cluster and the structural determinants underlying putative hybrid activity. We performed a phylogenetic analysis of the LAC-FOXs from basidiomycete fungi, that resulted in two subgroups. This division seemed to correlate with the presence or absence of some of the three acidic residues responsible for ferroxidase activity in Fet3p from Saccharomyces cerevisiae. One of these LAC-FOXs (with only one of these residues) from the fungus Heterobasidion annosum s. l. (HaLF) was synthesised, heterologously expressed and characterised to evaluate its catalytic activity. HaLF oxidised typical laccase substrates (phenols, aryl amines and N-heterocycles), but no Fe (II). The enzyme was subjected to site-directed mutagenesis to determine the key residues that confer ferroxidase activity. The mutated HaLF variant with full restoration of the three acidic residues exhibited efficient ferroxidase activity, while it partially retained the wide-range oxidative activity of the native enzyme associated to laccases sensu stricto.

Unlike laccases sensu stricto, which are usually monomeric enzymes, laccase-like enzymes recently re-classified as Novel Laccases (NLACs) are characterized by the formation of heterodimers with small proteins (subunits) of unknown function. Here the NLAC from Pleurotus eryngii (PeNL) and a small protein selected from the fungal genome, that is homologous to reported POXA3 from Pleurotus ostreatus, were produced in Aspergillus oryzae separately or together. The two proteins interacted regardless of whether the small subunit was co-expressed or exogenously added to the enzyme. The stability and catalytic activity of PeNL was significantly enhanced in the presence of the small subunit. Size exclusion chromatography-multi angle light scattering (SEC-MALS) analysis confirmed that the complex PeNL-ss is a heterodimer of 77.4 kDa. The crystallographic structure of the small protein expressed in Escherichia coli was solved at 1.6 Å resolution. This is the first structure elucidated of a small subunit of a NLAC. The helix bundle structure of the small subunit accommodates well with the enzyme model structure, including interactions with specific regions of NLACs and some amino acid residues of the substrate-binding loops.

Applications of lipases in low-water environments are found across a broad range of industries, including the pharmaceutical and oleochemical sectors. This includes condensation reactions in organic solvents where the enzyme activity has been found to depend strongly on both the solvent and the water activity (aw). Despite several experimental and computational studies, knowledge is largely empirical, and a general predictive approach is much needed. To close this gap, we chose native Candida antarctica lipase B (CALB) and two mutants thereof and used molecular dynamics (MD) simulations to gain a molecular understanding of the effect of aw on the specific activity of CALB in hexane. Based on the simulations, we propose four criteria to understand the performance of CALB in organic media, which is supported by enzyme kinetics experiments. First, the lipase must be stable in the organic solvent, which was the case for native CALB and the two mutants studied here. Secondly, water clusters that form and grow close to the active site must not block the path of substrate molecules into the active site. Thirdly, the lipase's lid must not cover the active site. Finally, mutations and changes in aw must not disrupt the geometry of the active site. We show that mutating specific residues close to the active site can hinder water cluster formation and growth, making the lipase resistant to changes in aw. Our computational screening criteria could potentially be used to screen in-silico designed variants, so only promising candidates could be pushed forward to characterisation.

Herein we studied the processes at the liquid aqueous interface at pH 7 and 8.5 during Thermomyces lanuginosus lipase-catalyzed hydrolysis of nanosized tri-, di- and mono-olein films deposited on a planar substrate. By employing a combination of ellipsometry, QCM-D and ATR-FTIR, we were able to reveal the physical properties of the thin films at high time resolution throughout the initial hydration and subsequent digestion, as well as the main chemical species present before and after lipolysis. The ATR-FTIR results showed that the degree of digestion and protonated state of the oleic acid produced in the reaction are highly dependent on the pH of the aqueous solvent. Furthermore, the ellipsometry and QCM-D results reveal that the duration of the lag phase observed before lipolysis was detected and the magnitude and type of changes to the physical properties of the thin films throughout digestion was influenced by whether the initial substrate consisted of tri-, di- or mono-olein.

Tyrian purple (also known as royal or imperial purple) is the oldest known commercial pigment and still one of the most expensive dyes, often associated with the wardrobes of clergy and royalty. It is a brominated derivative of indigo, a natural dye that has been used since 4000 BC. Moreover, just recently, the therapeutic value of indigoids for the treatment of several disorders was discovered. The manufacturing of indigo derivatives by the existing chemical routes has become increasingly uninteresting due to the use of aggressive reagents, expensive starting materials and high-energy costs. Thus, both dyestuff manufacturers and the pharmaceutical industry are interested in the development of gentle preparation methods of indigoids from simple precursors. Here, we describe a simple enzymatic method for the one-step synthesis of Tyrian purple and other indigo derivatives with fungal peroxygenases (UPO, EC 1.11.2.1). The reaction does not require complex co-substrates and works well in phosphate buffers with H2O2 (<0.1 wt%) and less than 5% (v/v) acetonitrile as co-solvent. We demonstrate the scaling up of the reaction to 10 Liters and established thereupon an environmentally friendly combined synthesis and in-situ dyeing process, further simplifying the manufacturing of vat-dyed fabrics. Eventually, we screened a number of halogen-substituted indoles in the search for novel indigo derivatives, which may be of interest for pharmaceutical and/or dyeing purposes.

Fungal laccases have great potential as biocatalysts oxidizing a variety of aromatic compounds using oxygen as co-substrate. Here, the crystal structure of 7D5 laccase (PDB 6H5Y), developed in Saccharomyces cerevisiae and overproduced in Aspergillus oryzae, is compared with that of the wild type produced by basidiomycete PM1 (Coriolopsis sp.), PDB 5ANH. SAXS showed both enzymes form monomers in solution, 7D5 laccase with a more oblate geometric structure due to heavier and more heterogeneous glycosylation. The enzyme presents superior catalytic constants towards all tested substrates, with no significant change in optimal pH or redox potential. It shows noticeable high catalytic efficiency with ABTS and dimethyl-4-phenylenediamine, 7 and 32 times better than the wild type, respectively. Computational simulations demonstrated a more favorable binding and electron transfer from the substrate to the T1 copper due to the introduced mutations. PM1 laccase is exceptionally stable to thermal inactivation (t1/2 70 °C = 1.2 h). Yet, both enzymes display outstanding structural robustness at high temperature. They keep folded during 2 h at 100 °C though, thereafter, 7D5 laccase unfolds faster. Rigidification of certain loops due to the mutations added on the protein surface would diminish the capability to absorb temperature fluctuations leading to earlier protein unfolding.

From laccase design to application of the overexpressed biocatalyst in an industrial environment for eco-friendly synthesis of polyaniline and dyes.

Lignin-degrading basidiomycetes and related fungi produce heme-containing peroxidases and peroxygenases, avin-containing oxidases and dehydrogenases, and different copper-containing oxidoreductases. Heme peroxidases comprise classical ligninolytic peroxidases and new dye-decolorizing peroxidases, while heme peroxygenases belong to a still largely unexplored superfamily of heme-thiolate peroxidases. Nevertheless, basidiomycete unspeci c peroxygenases have the highest biotechnological interest due to their ability to catalyze a variety of regioand stereo-selective monooxygenation reactions with H2O2 as source of oxygen and nal electron acceptor. Flavooxidases are involved in both lignin and cellulose decay generating H2O2 that activates peroxidases and generates hydroxyl radical, respectively. The group of copper oxidoreductases also includes other H2O2 generating enzymes (copperradical oxidases), together with classical laccases that are the oxidoreductases with the largest number of reported applications. However, the recently described lytic polysaccharide monooxygenases attract the highest attention among copper oxidoreductases, since they are able to break down (oxidatively) crystalline cellulose, a major bottleneck in lignocellulose biore neries (together with lignin degradation by peroxidases and laccases). Interestingly, some avin-containing dehydrogenases also play a key role "fueling" (directly or indirectly) electrons for polysaccharide monooxygenase activation. Many of the above oxidoreductases have been engineered, using both rational design and directed evolution, to attain the selectivity, catalytic e ciency and operational properties (stability included) required for their industrial utilization. Using ad hoc software and current computational capabilities, it is now possible to predict substrate access to the active site (biophysical simulations) and electron transfer e ciency (biochemical simulations), reducing in orders of magnitude the time of experimental work in enzyme screening and engineering. The above is illustrated by a series of oxyfunctionalization and oxidation reactions (e.g. enzymatic synthesis of 1-naphthol, 25-hydroxyvitamin D3, drug metabolites, chiral alcohols, furandicarboxylic acid, indigo dyes and conductive polyaniline, terminal oxygenation of alkanes, biomass deligni cation and lignin oxidation) as successful case stories demonstrating the potential of oxidoreductases in medium and large-scale industrial biotransformations.

Fungi produce heme-containing peroxidases and peroxygenases, flavin-containing oxidases and dehydrogenases, and different copper-containing oxidoreductases involved in the biodegradation of lignin and other recalcitrant compounds. Heme peroxidases comprise the classical ligninolytic peroxidases and the new dye-decolorizing peroxidases, while heme peroxygenases belong to a still largely unexplored superfamily of heme-thiolate proteins. Nevertheless, basidiomycete unspecific peroxygenases have the highest biotechnological interest due to their ability to catalyze a variety of regio- and stereo-selective monooxygenation reactions with H2O2 as the source of oxygen and final electron acceptor. Flavo-oxidases are involved in both lignin and cellulose decay generating H2O2 that activates peroxidases and generates hydroxyl radical. The group of copper oxidoreductases also includes other H2O2 generating enzymes - copper-radical oxidases - together with classical laccases that are the oxidoreductases with the largest number of reported applications to date. However, the recently described lytic polysaccharide monooxygenases have attracted the highest attention among copper oxidoreductases, since they are capable of oxidatively breaking down crystalline cellulose, the disintegration of which is still a major bottleneck in lignocellulose biorefineries, along with lignin degradation. Interestingly, some flavin-containing dehydrogenases also play a key role in cellulose breakdown by directly/indirectly "fueling" electrons for polysaccharide monooxygenase activation. Many of the above oxidoreductases have been engineered, combining rational and computational design with directed evolution, to attain the selectivity, catalytic efficiency and stability properties required for their industrial utilization. Indeed, using ad hoc software and current computational capabilities, it is now possible to predict substrate access to the active site in biophysical simulations, and electron transfer efficiency in biochemical simulations, reducing in orders of magnitude the time of experimental work in oxidoreductase screening and engineering. What has been set out above is illustrated by a series of remarkable oxyfunctionalization and oxidation reactions developed in the frame of an intersectorial and multidisciplinary European RTD project. The optimized reactions include enzymatic synthesis of 1-naphthol, 25-hydroxyvitamin D3, drug metabolites, furandicarboxylic acid, indigo and other dyes, and conductive polyaniline, terminal oxygenation of alkanes, biomass delignification and lignin oxidation, among others. These successful case stories demonstrate the unexploited potential of oxidoreductases in medium and large-scale biotransformations.

Here, we present a lipase mutant containing a biochemical switch allowing a controlled opening and closing of the lid independent of the environment. The closed form of the TlL mutant shows low binding to hydrophobic surfaces compared to the binding observed after activating the controlled switch inducing lid-opening. We directly show that lipid binding of this mutant is connected to an open lid conformation demonstrating the impact of the exposed amino acid residues and their participation in binding at the water-lipid interface. The switch was created by introducing two cysteine residues into the protein backbone at sites 86 and 255. The crystal structure of the mutant shows the successful formation of a disulfide bond between C86 and C255 which causes strained closure of the lid-domain. Control of enzymatic activity and binding was demonstrated on substrate emulsions and natural lipid layers. The locked form displayed low enzymatic activity (~10%) compared to wild-type. Upon release of the lock, enzymatic activity was fully restored. Only 10% binding to natural lipid substrates was observed for the locked lipase compared to wild-type, but binding was restored upon adding reducing agent. QCM-D measurements revealed a seven-fold increase in binding rate for the unlocked lipase. The TlL_locked mutant shows structural changes across the protein important for understanding the mechanism of lid-opening and closing. Our experimental results reveal sites of interest for future mutagenesis studies aimed at altering the activation mechanism of TlL and create perspectives for generating tunable lipases that activate under controlled conditions.

Polyaniline is a conductive polymer with distinctive optical and electrical properties. Its enzymatic synthesis is an environmentally friendly alternative to the use of harsh oxidants and extremely acidic conditions. 7D5L, a high-redox potential laccase developed in our lab, is the biocatalyst of choice for the synthesis of green polyaniline (emeraldine salt) due to its superior ability to oxidize aniline and kinetic stability at the required polymerization conditions (pH 3 and presence of anionic surfactants) as compared with other fungal laccases. Doses as low as 7.6 nM of 7D5L catalyze the polymerization of 15 mM aniline (in 24 h, room temperature, 7% yield) in the presence of different anionic surfactants used as doping templates to provide linear and water-soluble polymers. Aniline polymerization was monitored by the increase of the polaron absorption band at 800 nm (typical for emeraldine salt). Best polymerization results were obtained with 5 mM sodium dodecylbenzenesulfonate (SDBS) as template. At fixed conditions (15 mM aniline and 5mM SDBS), polymerization rates obtained with 7D5L were 2.5-fold the rates obtained with commercial Trametes villosa laccase. Moreover, polyaniline yield was notably boosted to 75% by rising 7D5L amount to 0.15 μM, obtaining 1g of green polyaniline in 1L-reaction volume. The green polymer obtained with the selected system (7D5L/SDBS) holds excellent electrochemical and electro-conductive properties displayed in water-dispersible nanofibers, which is advantageous for the nanomaterial to be readily cast into uniform films for different applications.

The attractiveness of lipases as industrial biocatalysts underlines the importance of understanding their molecular action in detail, helping future efforts to improve performance and applicability. Lipases represent a special class of carboxyl ester hydrolases, which act on long‐chained water insoluble acyl‐glycerols at the water‐lipid interface. This heterogeneous catalysis makes it very difficult to monitor the structural changes taking place in the enzyme during activation in its preferred milieu. In this review, we cover recent developments toward a deeper understanding of the interfacial activation phenomenon of lipases and discuss a selection of biophysical methods suitable for studying lipase activation. For many lipases, such as that from Thermomyces lanuginosus, a structural domain called the “lid” is directly involved in the activation process. This has been shown through alteration of the lid‐residue composition using rational design. The resulting lid‐mutants have highlighted the lid's role in governing enzymatic activity and interfacial activation. Moreover, a recently developed fluorescence‐based technique called the Tryptophan Induced Quenching method has proved to enable the direct measurement of lipase activation in water‐ethanol mixtures, and thus represents an intriguing method to gain further insight into the structural movements taking place at the water‐lipid interface.Practical applications: Lipases are important industrial biocatalysts widely used in industrial applications including detergent, leather, paper, fuel, fine chemicals, baking, cosmetics, and food. Knowledge of structural changes of lipase upon activation and identification of the amino acids involved in lipase activation is crucial for design of new variants with improved or new properties. Rational design of the lid‐region in lipases has an interesting potential for optimization of lipase function and adapting them to different environments. In order to leverage on the design of new lipase variants and their altered function, methods that enable direct measurement of lipase action directly in solution, in real time, are desired. In this context, fluorescence based methods have shown great potential and provides interesting perspectives for probing the delicate movements occurring in lipases upon activation.Interfacial activation of lipases and the lid movements studied by rational design, fluorescence quenching methods, and solvent effect – polarity driven activation.

We have used the crystal structure of Thermomyces lanuginosus lipase (TlL) to identify and strengthen potential protein–protein interaction sites in solution. As wildtype we used a deglycosylated mutant of TlL (N33Q). We designed a number of TlL mutants to promote interactions via interfaces detected in the crystal-lattice structure, through strengthening of hydrophobic, polar or electrostatic contacts or truncation of sterically blocking residues. We identify a mutant predicted to lead to increased interfacial hydrophobic contacts (N92F) that shows markedly increased self-association properties on native gradient gels. While wildtype TlL mainly forms monomer and < 5% dimers, N92F forms stable trimers and dimers according to Size-Exclusion Chromatography and Small-Angle X-ray Scattering. These oligomers account for ~ 25% of the population and their enzymatic activity is comparable to that of the monomer. Self-association stabilizes TlL against thermal denaturation. Furthermore, the trimer is stable to dilution and requires high concentrations (> 2 M) of urea to dissociate. We conclude that crystal lattice contacts are a good starting point for design strategies to promote protein self-association.

Thermomyces lanuginosus lipase (TlL) and related lipases become activated in low-polarity environments that exist at the water-lipid interface where a structural change of the "lid" region occurs. In this work, we have investigated the activation of TlL (Lipase_W89) and certain lid mutants, containing either a single positive charge mutation, E87K (Lipase_K87_W89), within the lid region or a lid residue composition of both lipase and esterase character (Hybrid_W89) as a function of solvent polarity. Activation differences between the variants and TlL were studied by a combination of biophysical and theoretical methods. To investigate the structural changes taking place in the lid region upon lipase activation, we used a fluorescence-based method measuring the efficiency of Trp89 in the lid to quench the fluorescence of a bimane molecule attached in front (C255) and behind (C61) the lid. These structural changes were compared to the enzymatic activity of each variant at the water-substrate interface and to theoretical calculations of the energies associated with lid opening as a function of the dielectric constant (ε) of the environment. Our results show that the lid in Lipase_K87_W89 undergoes a pronounced structural transition toward an open conformation around ε = 50, whereas only small changes are detected for Lipase_W89 ascribed to the stabilizing effect of the positive charge mutation on the open lid conformation. Interestingly, Hybrid_W89, with the same charge as Lipase_W89, shows a stabilization of the open lid even more pronounced at high solvent polarities than that of Lipase_K87_W89, allowing activation at ε < 80. This is further indicated by measurement of the lipase activity for each variant showing that Hybrid_W89 is more quickly activated at the water-lipid interface of a true, natural substrate. Combined, we show that a correlation exists between structural changes and enzymatic activities detected on one hand and theoretical calculations on lid opening energies on the other. These results highlight the key role that the lid plays in determining the polarity-dependent activation of lipases.

Triacylglycerol hydrolases (EC 3.1.1.3) are thought to become activated when they encounter the water-lipid interface causing a "lid" region to move and expose the catalytic site. Here, we tested this idea by looking for lid movements in Thermomyces lanuginosus lipase (TL lipase), and in variants with a mutated lid region of esterase (Esterase) and esterase/lipase (Hybrid) character. To measure lid movements, we employed the tryptophan-induced quenching (TrIQ) fluorescence method to measure how effectively a Trp residue on the lid of these mutants (at position 87 or 89) could quench a fluorescent probe (bimane) placed at nearby site 255 on the protein. To test if lid movement is induced when the enzyme detects a lower-polarity environment (such as at the water-lipid interface), we performed these studies in solvents with different dielectric constants (ε). The results show that lid movement is highly dependent on the particular lid residue composition and solvent polarity. The data suggest that in aqueous solution (ε = 80), the Esterase lid is in an "open" conformation, whereas for the TL lipase and Hybrid, the lid remains "closed". At lower solvent polarities (ε < 46), the lid region for all of the mutants is more "open". Interestingly, these behaviors mirror the structural changes thought to take place upon activation of the enzyme at the water-lipid interface. Together, these results support the idea that lipases are more active in low-polarity solvents because the lid adopts an "open" conformation and indicate that relatively small conformational changes in the lid region play a key role in the activation mechanism of these enzymes.