The desired attributes of organic photovoltaics (OPV) as a low cost and sustainable energy harvesting technology demand the use of non-halogenated solvent processing for the photoactive layer (PAL) materials, preferably of low synthetic complexity (SC) and without compromising the power conversion efficiency (PCE). Despite their record PCEs, most donor-acceptor conjugated copolymers in combination with non-fullerene acceptors are still far from upscaling due to their high cost and SC. Here we present a non-halogenated and low SC ink formulation for the PAL of organic solar cells, comprising PTQ10 and PC61BM as donor and acceptor materials, respectively, showing a record PCE of 7.5% in blade coated devices under 1 sun, and 19.9% under indoor LED conditions. We further study the compatibility of the PAL with 5 different electron transport layers (ETLs) in inverted architecture. We identify that commercial ZnO-based formulations together with a methanol-based polyethyleneimine-Zn (PEI-Zn) chelated ETL ink are the most suitable interlayers for outdoor conditions, providing fill factors as high as 74% and excellent thickness tolerance (up to 150 nm for the ETL, and >200 nm for the PAL). In indoor environments, SnO2 shows superior performance as it does not require UV photoactivation. Semi-transparent devices manufactured entirely in air via lamination show indoor PCEs exceeding 10% while retaining more than 80% of the initial performance after 400 and 350 hours of thermal and light stress, respectively. As a result, PTQ10:PC61BM combined with either PEI-Zn or SnO2 is currently positioned as a promising system for industrialisation of low cost, multipurpose OPV modules.

Three novel donor-acceptor-π-acceptor-type compounds (WS5, WS6, and WS7) were synthesized and investigated in dye-sensitized solar cells (DSSCs) exploring the effect of conjugated linkers on device performance. The new dyes showed strong light-harvesting ability in the visible region with relatively high molar absorption coefficients (>21 800 M-1 cm-1). This can be attributed to their intrinsic charge transfer (CT) from the arylamine to the acceptor group. Density functional theory (DFT) calculations revealed a favorable lowest unoccupied molecular orbital (LUMO) energy level, allowing efficient injection into the semiconductor conduction band after excitation. Upon application in DSSC devices, the WS5 dye containing 4,7-di(furan-2-yl)benzo[c][1,2,5]thiadiazole as conjugated linker mediated the highest device power conversion efficiency (PCE) amounting to 5.5%. This is higher than that of the WS6-containing dye based on the 4,7-di(thiophen-2-yl)benzo[c][1,2,5]thiadiazole linker (3.5%) and the WS7 dye based on the 4-(thiophen-2-yl)benzo[c][1,2,5]thiadiazole linker (4.3%) under AM 1.5 G illumination. The present results show furan-based dye linker systems to have a significant potential for improving DSSC efficiencies.

A one-pot method for encapsulation of dye, which can be applied for dye-sensitized solar cells (DSSCs), and synthesis of hierarchical porous zeolitic imidazolate frameworks (ZIF-8), is reported. The size of the encapsulated dye tunes the mesoporosity and surface area of ZIF-8. The mesopore size, Langmuir surface area and pore volume are 15 nm, 960–1500 m 2 · g −1 and 0.36–0.61 cm 3 · g −1 , respectively. After encapsulation into ZIF-8, the dyes show longer emission lifetimes (greater than 4–8-fold) as compared to the corresponding non-encapsulated dyes, due to suppression of aggregation, and torsional motions.

Dye-sensitised solar cells (DSSCs) have been recognised and rapidly developed as one of the third generation of photovoltaic technologies over the past three decades. This chapter describes the scientific history, working principles, development and mechanistic understanding of each component in the device, in addition to some of the key techniques used to study DSSCs, such as transient absorption spectroscopy, photoelectron spectroscopy and electrochemical impedance spectroscopy. We hope that this chapter will be useful for people who are interested in the applications of chemistry in renewable energy conversion.

A series of molecularly engineered and novel dyes WS1, WS2, WS3, and WS4, based on the D35 donor, 1-(4-hexylphenyl)-2,5-di(thiophen-2-yl)-1H-pyrrole and 4-(4-hexylphenyl)-4H-dithieno[3,2-b:2',3'-d]pyrrole as π-conjugating linkers, were synthesized and compared to the well-known LEG4 dye. The performance of the dyes was investigated in combination with an electrolyte based on Co(II/III) complexes as redox shuttles. The electron recombination between the redox mediators in the electrolyte and the TiO2 interface decreases upon the introduction of 4-hexylybenzene entities on the 2,5-di(thiophen-2-yl)-1H-pyrrole and 4H-dithieno[3,2-b:2',3'-d]pyrrole linker units, probably because of steric hindrance. The open circuit photovoltage of WS1-, WS2-, WS3-, and WS4-based devices in combination with the Co(II/III)-based electrolyte are consistently higher than those based on a I-/I3 - electrolyte by 105, 147, 167, and 75 mV, respectively. The WS3-based devices show the highest power conversion efficiency of 7.4% at AM 1.5 G 100 mW/cm2 illumination mainly attributable to the high open-circuit voltage (V OC).

Tandem redox electrolytes, prepared by the addition of a tris(p-anisyl)amine mediator into classic tris(bipyridine)cobalt-based electrolytes, demonstrate favorable electron transfer and reduced energy loss in dye-sensitized solar cells. Here, we have successfully explored three tris(4-alkoxyphenyl)-amine mediators with bulky molecular structures and generated more effective tandem redox systems. This series of tandem redox electrolytes rendered solar cells with very high photovoltages exceeding 1 V, which approaches the theoretical voltage limit of tris(bipyridine)cobalt-based electrolytes. Solar cells with power conversion efficiencies of 9.7-11.0% under 1 sun illumination were manufactured. This corresponds to an efficiency improvement of up to 50% as compared to solar cells based on pure tris(bipyridine)cobalt-based electrolytes. The photovoltage increases with increasing steric effects of the tris(4-alkoxyphenyl)amine mediators, which is attributed to a retarded recombination kinetics. These results highlight the importance of structural design for optimized charge transfer at the sensitized semiconductor/electrolyte interface and provide insights for the future development of efficient dye-sensitized solar cells.

Perovskite photovoltaics have recently attracted extensive attention due to their unprecedented high power conversion efficiencies (PCEs) in combination with primitive manufacturing conditions. However, the inherent polycrystalline nature of perovskite films renders an exceptional density of structural defects, especially at the grain boundaries (GBs) and film surfaces, representing a key challenge that impedes the further performance improvement of perovskite solar cells (PSCs) and large solar module ambitions towards commercialization. Here, a novel strategy is presented utilizing a simple ethylammonium chloride (EACl) additive in combination with a facile solvent bathing approach to achieve high quality methyammonium lead iodide (MAPbI(3)) films. Well-oriented, micron-sized grains were observed, which contribute to an extended carrier lifetime and reduced trap density. Further investigations unraveled the distinctively prominent effects of EACl in modulating the perovskite film quality. The EACl was found to promote the perovskite grain growing without undergoing the formation of intermediate phases. Moreover, the EACl was also revealed to deplete at relative low temperature to enhance the film quality without compromising the beneficial bandgap for solar cell applications. This new strategy boosts the power conversion efficiency (PCE) to 20.9% and 19.0% for devices with effective areas of 0.126 cm(2) and 1.020 cm(2), respectively, with negligible current hysteresis and enhanced stability. Besides, perovskite films with a size of 10 x 10 cm(2), and an assembled 16 cm(2) (5 x 5 cm(2) module) perovskite solar module with a PCE of over 11% were constructed.

In this work, two Cu(II) complex compounds are designed and synthesized for applications as p-type dopants in solid-state perovskite solar cells (PSCs). Through the characterization of the optical and electrochemical properties, the complex Cu(bpcm)(2) is shown to be eligible for oxidization of the commonly used hole-transport material (HTM) SpiroOMeTAD. The reason is the electron-withdrawing effect of the chloride groups on the ligands. When the complex was applied as p-type dopant in PSCs containing Spiro-OMeTAD as HTM, an efficiency as high as 18.5% was achieved. This is the first time a Cu(II) pyridine complex has been used as p-type dopant in PSCs.

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

State Key Laboratory of Fine Chemicals DUT-KTH Joint Education and Research University of Technology (DUT), Dalian 116 Organic Chemistry, Center of Molecular De Chemical Science and Engineering, KTH Ro 30, SE-10044, Stockholm, Sweden Applied Physical Chemistry, School of Chem of Chemistry KTH Royal Institute of Te Stockholm, Sweden † Electronic supplementary information ( and crystallographic data in CIF or 10.1039/c6ra25676g ‡ These authors contributed equally to th Cite this: RSC Adv., 2017, 7, 4611

A copper(6,6′-dimethyl-2,2′-bipyridine)2]2+/1+ redox couple was developed as a redox mediator in dye-sensitized solar cells.

Blue and green dyes as well as NIR-absorbing dyes have attracted great interest because of their excellent ability of absorbing the incident photons in the red and near-infrared range region. A novel blue D-π-A dye (Dyenamo Blue), based on the diketopyrrolopyrrole (DPP)-core, has been designed and synthesized. Assembled with the cobalt bipyridine-based electrolytes, the device with Dyenamo Blue achieved a satisfying efficiency of 7.3% under one sun (AM1.5 G). The co-sensitization strategy was further applied on this blue organic dye together with a red D-π-A dye (D35). The successful co-sensitization outperformed a panchromatic light absorption and improved the photocurrent density; this in addition to the open-circuit potential result in an efficiency of 8.7%. The extended absorption of the sensitization and the slower recombination reaction between the blue dye and TiO2 surface inhibited by the additional red sensitizer could be the two main reasons for the higher performance. In conclusion, from the results, the highly efficient cobalt-based DSSCs could be achieved with the co-sensitization between red and blue D-π-A organic dyes with a proper design, which showed us the possibility of applying this strategy for future high-performance solar cells.

Applied Physical Chemistry, School of Chem of Chemistry KTH Royal Institute of Te Stockholm, Sweden. E-mail: Lakloo@kth.se Dyenamo AB, Greenhouse Labs, Teknikring Organic Chemistry, School of Chemical S Chemistry, KTH Royal Institute of Tec Stockholm, Sweden SP Process Development, Forskargatan, SEState Key Laboratory of Fine Chemicals, Center on Molecular Devices, Dalian Un Dalian, China † Electronic supplementary information 1457921. For ESI and crystallographic dat DOI: 10.1039/c6ta06782d ‡ These authors contributed equally to th Cite this: J. Mater. Chem. A, 2016, 4, 14550

A new redox couple, [Cu(bpye)2]+/2+, has been synthesized and applied in DSSCs. Overall efficiencies above 9.0% and good photostability were obtained. Excellent electrolyte charge transport, fast regeneration and low recombination are the major reasons for the high efficiencies.

Using the reductive power of the ferrocene moiety (Fc), an ultrafast regeneration step via a covalent attachment of a Fc moiety to an organic triphenylamine-based dye (L1) when adsorbed on TiO2 is highlighted. Two modified dyes with one and two Fc moieties attached (L1Fc, and L1Fc2), respectively, were synthesized by addition to the L1 dye. These dyes have been studied spectroscopically using ultrafast transient absorption spectroscopy in the visible and the infrared (IR) regions. In acetonitrile, the results show an ultrafast excited state quenching of the modified dyes due to an expected electron transfer process from the Fc(s) to L1. Adsorbed onto TiO2, an electron transfer process is also detected from Fc to the oxidized dye (L1(+)). Despite the occurrence of an ultrafast regeneration step, the solar cell performance does not improve by the attachment of Fc(s) to the dye L1. Transient absorption measurements in the IR region revealed a fast electron recombination process to the Fc(+) moiety on an average time scale of ca. 300 ps, outcompeting the >12 ns process to L1(+). The reasons for the observed considerably faster recombination rate to Fc(+) than to L1(+) are discussed in detail. This study provides deep spectroscopic insights for such organic dyes utilized to afford ultrafast regeneration step without showing high performance in photovoltaic devices. In addition, this study will improve our understandings for the triangular relationship between the molecular design, electron kinetics, and the performance in photovoltaic devices. (C) 2016 Elsevier Ltd. All rights reserved.

Gratzel cells or Dye-Sensitized Solar Cells (DSSCs) are considered one of the most promising methods to convert the sun's energy into electricity due to their low cost and simple technology of production. The Gratzel cell is based on a photosensitizer adsorbed on a low band gap semiconductor. The photosensitizer can be a metal complex or an organic dye. Organic dyes can be produced on a large scale resulting in cheaper dyes than complexes based on rare elements. However, the performance of Gratzel cells based on metal-free, organic dyes is not high enough yet. The dye's performance depends primarily on the electron dynamics. The electron dynamics in Gratzel cells includes electron injection, recombination, and regeneration. Different deactivation processes affect the electron dynamics and the cells’ performance.In this thesis, the electron dynamics was explored by various time-resolved spectroscopic techniques, namely time-correlated single photon counting, streak camera, and femtosecond transient absorption. Using these techniques, new deactivation processes for organic dyes used in DSSCs were uncovered. These processes include photoisomerization, and quenching through complexation with the electrolyte. These deactivation processes affect the performance of organic dyes in Gratzel cells, and should be avoided. For instance, the photoisomerization can compete with the electron injection and produce isomers with unknown performance. Photoisomerization as a general phenomenon in DSSC dyes has not been shown before, but is shown to occur in several organic dyes, among them D149, D102, L0 and L0Br. In addition, D149 forms ground state complexes with the standard iodide/triiodide electrolyte, which directly affect the electron dynamics on TiO2. Also, new dyes were designed with the aim of using ferrocene(s) as intramolecular regenerators, and their dynamics was studied by transient absorption.This thesis provides deeper insights into some deactivation processes of organic dyes used in DSSCs. New rules for the design of organic dyes, based on these insights, can further improve the efficiency of DSSCs.