To solve the problem of shortage of agricultural water resources and low utilization rate of fertilizer, a slow-release fertilizer based on chitosan modified water retention function was developed. Solution polymerization and semi-interpenetrating network technology were used to load urea aldehyde into carboxymethyl chitosan superabsorbent resin network. This technology realizes the simultaneous slow release of nutrients and water by using modified chitosan, which has important implications for the application of chitosan in agriculture to regulate the soil water and fertilizer conditions. The optimal preparation conditions were: MBA 0.07 %, KPS 0.8 %, AM to AA mass ratio of 0.3:1, CMC content of 10 %, AA neutralization degree 85 %, UF 20 %, AA+AM mass sum of 10 g, reaction temperature 70 °C and reaction time 2 h. The maximum water absorption rate of the optimized NC reached 172.3 g/g. The cumulative release of nitrogen in 30 days was 83.67 %. The application of NC in sandy soil promoted seed germination and growth. The comprehensive results indicate that NC has broad application prospects in arid areas based on its excellent water retention and nutrient release performance.

Modern agriculture presents new requirements of low cost, high water retention and degradability for superabsorbent and slow-release fertilizers. In this study, carrageenan (CG), acrylic acid (AA), N, N ‘-methylene diacrylamide (MBA), urea and ammonium persulfate (APS) were used as raw materials. A kind of high water absorption, water retention, nitrogen slow release and biodegradable carrageenan superabsorbent (CG-SA) was prepared by grafting copolymerization. The optimal CG-SA was obtained with a water absorption rate of 680.45 g/g by orthogonal L18(3)7 experiments and single-factor experiments. The water absorption behavior of CG-SA in deionized water and salt solution were studied. The CG-SA was characterized before and after degradation by FTIR, SEM. The nitrogen release behavior and kinetic characteristics of CG-SA were investigated. In addition, CG-SA degraded 58.33 % and 64.35 % in soil at 25 °C and 35 °C after 28 days. All the results indicated that the low-cost and degradable CG-SA can achieve simultaneous slow release of water and nutrients, which is expected to be widely used as a new water-fertilizer integration technology in arid and poor areas.

The accumulation of nonbiodegradable petrochemical-based polymers in the environment motivates the development and use of low-cost, eco-friendly, and biodegradable polymers. A series of biodegradable poly(butylene adipate-co-terephthalate) composites reinforced by sustainably sourced nanochitin were successfully prepared using melt blending and compression molding methods. Structural, thermal, and mechanical characterizations of poly(butylene adipate-co-terephthalate) (PBAT)/nanochitin composites were performed. SEM revealed that the nanochitin was uniformly dispersed throughout the PBAT matrix at low contents (<2 wt %), while DSC analyses revealed a corresponding increase in the crystallinity (32.6% enhancement) of the PBAT matrix. The tensile strength and elongation at break of the PBAT/nanochitin composite containing 0.5 wt % nanochitin were higher by 82.5 and 64.2%, respectively, compared with pristine PBAT. The Chitin-0.5 composite also showed improved thermal stability compared with PBAT (the char yield improved by 8%) due to the uniform dispersion of nanochitin in the PBAT matrix. The enhanced performance of the PBAT/nanochitin composites, prepared without an added compatibilizer, informs the development of improved biodegradable PBAT-based polymers. (c) 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 48485.