To date (17 November 2021), there has been more than 254 million confirmed cases of COVID-19, and more than 5 million death globally (World Health Organization. https://covid19.who.int/). The virus causing COVID-19 is called Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). SARS-CoV-2 infects host cells by the binding of its spike protein to the cellular surface protein angiotensin-converting enzyme 2 (ACE2). The predicted 29 amino acid residues of ACE2 that interact with SARS-CoV-2 spike protein receptor binding domain (RBD) vary between human ACE2 and mouse or rat ACE2. Therefore, wildtype mice and rats show lower SARS-CoV-2 infection rate and mild symptoms compared to what is seen in humans. Small animal models that recapitulate human COVID-19 disease are urgently needed for better understanding the transmission and therapeutic measurement. Currently, scientists use either mouse-adapted SAS-CoV-2 (SAS-CoV-2 MA) models or random transgenic mouse models that artificially express human ACE2 under the control of cytokeratin 18 promoter or a constitutive promoter. SAS-CoV-2 MA may not completely reflect all aspects of the original human-tropic SAS-CoV-2 and the current transgenic human ACE2 mouse models typically have high mortality rate caused by neuroinvasion and encephalitis due to very high human ACE2 expression. To overcome these limitations, we have developed humanized ACE2 mouse and rat models using CRISPR-Cas9. Specifically, we inserted a ~3kb human ACE2 cDNA cassette into the mouse and rat Ace2 gene loci to ensure that human ACE2 expression is under the control of rodent Ace2 promoter and regulatory elements, while simultaneously disabling the rodent Ace2 gene. To accomplish this, CRISPR gRNAs targeting close to the translation initiation site of Ace2 were screened in cultured mouse and rat cells. Then CRISPR/Cas9 complex and donor DNA were subsequently microinjected into one-cell stage embryos which were subsequently implanted into pseudo pregnant females. Resulting pups were screened for correct knockin by junction PCR and insert PCR, and the PCR products were Sanger sequenced. Targeted Locus Amplification (TLA) further confirmed the integration sites and transgene sequence. RT-qPCR and Western blot analysis data showed that, in our models, human ACE2 is expressed in tissues expressing endogenous Ace2 (such as lung, kidney, and GI tract), while rodent endogenous Ace2 is absent from these tissues. Further breeding data indicated that both hemizygous and homozygous humanized ACE2 animals appear to be normal and fertile. Most importantly, animals displayed symptoms after infection with SARS-CoV-2. In summary, these data suggest that our humanized ACE2 models can be valuable for COVID-19 research.

MAD7 is an engineered class 2 type V-A CRISPR-Cas (Cas12a/Cpf1) system isolated from Eubacterium rectale. Analogous to Cas9, it is an RNA-guided nuclease with demonstrated gene editing activity in Escherichia coli and yeast cells. Here, we report that MAD7 is capable of generating indels and fluorescent gene tagging of endogenous genes in human HCT116 and U2OS cancer cell lines, respectively. In addition, MAD7 is highly proficient in generating indels, small DNA insertions (23 bases), and larger integrations ranging from 1 to 14 kb in size in mouse and rat embryos, resulting in live-born transgenic animals. Due to the different protospacer adjacent motif requirement, small-guide RNA, and highly efficient targeted gene disruption and insertions, MAD7 can expand the CRISPR toolbox for genome enginnering across different systems and model organisms.

The rat is a preferred model system over the mouse for neurological studies, and cell type-specific Cre expression in the rat enables precise ablation of gene function in neurons of interest, which is especially valuable for neurodegenerative disease modeling and optogenetics. Yet, few such Cre rats are available. Here we report the characterization of two Cre rats, tyrosine hydroxylase (TH)-Cre and dopamine active transporter (DAT or Slc6a3)-Cre, by using a combination of immunohistochemistry (IHC) and mRNA fluorescence in situ hybridization (FISH) as well as a fluorescent reporter for Cre activity. We detected Cre expression in expected neurons in both Cre lines. Interestingly, we also found that in Th-Cre rats, but not DAT-Cre rats, Cre is expressed in female germ cells, allowing germline excision of the floxed allele and hence the generation of whole-body knockout rats. In summary, our data demonstrate that targeted integration of Cre cassette lead to faithful recapitulation of expression pattern of the endogenous promoter, and mRNA FISH, in addition to IHC, is an effective method for the analysis of the spatiotemporal gene expression patterns in the rat brain, alleviating the dependence on high quality antibodies that are often not available against rat proteins. The Th-Cre and the DAT-Cre rat lines express Cre in selective subsets of dopaminergic neurons and should be particularly useful for researches on Parkinson's disease.

The rapid development of CRISPR technology greatly impacts the field of genetic engineering. The simplicity in design and generation of highly efficient CRISPR reagents allows more and more researchers to take on genome editing in different model systems in their own labs, even for those who found it daunting before. An active CRISPR complex contains a protein component (Cas9) and an RNA component (small guide RNA [sgRNA]), which can be delivered into cells in various formats. Cas9 can be introduced as a DNA expression plasmid, in vitro transcripts, or as a recombinant protein bound to the RNA portion in a ribonucleoprotein particle (RNP), whereas the sgRNA can be delivered either expressed as a DNA plasmid or as an in vitro transcript. Here we compared the different delivery methods in cultured cell lines as well as mouse and rat single-cell embryos and view the RNPs as the most convenient and efficient to use. We also report the detection of limited off-targeting in cells and embryos and discuss approaches to lower that chance. We hope that researchers new to CRISPR find our results helpful to their adaptation of the technology for optimal gene editing.

Animal models for cystic fibrosis (CF) have contributed significantly to our understanding of disease pathogenesis. Here we describe development and characterization of the first cystic fibrosis rat, in which the cystic fibrosis transmembrane conductance regulator gene (CFTR) was knocked out using a pair of zinc finger endonucleases (ZFN). The disrupted Cftr gene carries a 16 base pair deletion in exon 3, resulting in loss of CFTR protein expression. Breeding of heterozygous (CFTR+/-) rats resulted in Mendelian distribution of wild-type, heterozygous, and homozygous (CFTR-/-) pups. Nasal potential difference and transepithelial short circuit current measurements established a robust CF bioelectric phenotype, similar in many respects to that seen in CF patients. Young CFTR-/- rats exhibited histological abnormalities in the ileum and increased intracellular mucus in the proximal nasal septa. By six weeks of age, CFTR-/- males lacked the vas deferens bilaterally. Airway surface liquid and periciliary liquid depth were reduced, and submucosal gland size was abnormal in CFTR-/- animals. Use of ZFN based gene disruption successfully generated a CF animal model that recapitulates many aspects of human disease, and may be useful for modeling other CF genotypes, including CFTR processing defects, premature truncation alleles, and channel gating abnormalities.

Edward Weinstein is the Director of Sigma Advanced Genetic Engineering, where he manages a state-of-the-art facility dedicated to creation of genetically engineered mouse, rat and rabbit models designed for research use. Prior to this position, he served as a Principal Scientist in the R&D division and Manager of Operations for Functional Genomics in the Research Biotechnology business unit of Sigma-Aldrich. Before joining Sigma, he performed basic research within the pharmaceutical industry. Edward had responsibility for the Molecular Profiling portfolio within Merck’s oncology franchise. His work there centered on discovery of new therapeutic targets as well as biomarkers for drug safety and efficacy. At Pfizer, he worked on development of several therapeutic targets, developing mouse models for breast and colon carcinoma. He completed his master’s in Medical Science from Harvard Medical School and his Ph.D. in Genetics from Harvard University where his research focused on mouse models of mammary gland carcinoma. Throughout his career Edward has focused on the application of animal models for the elucidation of mechanisms of complex disease processes. Rapid targeted genome modification in mice, rats and rabbits

Animal models are critical for gaining insights into autism spectrum disorder (ASD). Despite their apparent advantages to mice for neural studies, rats have not been widely used for disorders of the human CNS, such as ASD, for the lack of convenient genome manipulation tools. Here we describe two of the first transgenic rat models for ASD, developed using zinc-finger nuclease (ZFN) methodologies, and their initial behavioral assessment using a rapid juvenile test battery. A syndromic and nonsyndromic rat model for ASD were created as two separate knockout rat lines with heritable disruptions in the genes encoding Fragile X mental retardation protein (FMRP) and Neuroligin3 (NLGN3). FMRP, a protein with numerous proposed functions including regulation of mRNA and synaptic protein synthesis, and NLGN3, a member of the neuroligin synaptic cell-adhesion protein family, have been implicated in human ASD. Juvenile subjects from both knockout rat lines exhibited abnormalities in ASD-relevant phenotypes including juvenile play, perseverative behaviors, and sensorimotor gating. These data provide important first evidence regarding the utility of rats as genetic models for investigating ASD-relevant genes.

Nat. Methods 10, 638–640 (2013); published online 9 June 2013; corrected after print 26 August 2013 In the version of this article initially published, a name was misspelled in the Acknowledgments section. The error has been corrected in the HTML and PDF versions of the article.