Chalcogen vacancies in monolayer transition metal dichalcogenides (TMDs), such as WS2, play a crucial role in various applications ranging from optoelectronics and catalysis to quantum information science (QIS), making their identification and control essential. This study focuses on the WS2 single vacancy and vacancy pairs. Using first-principles computations, we investigate their thermodynamic stabilities and electronic structures. We identify an "on-top" divacancy configuration where two vacancies sit on top of each other to be the only energetically stable complex with a binding energy of 160 meV. We compute a small difference in electronic structure with a shift of the unoccupied state by 140 meV for the divacancy complex and make note of a similar shift observed experimentally.

Tomonaga-Luttinger liquid (TLL) behavior in one-dimensional systems has been predicted and shown to occur at semiconductor-to-metal transitions within two-dimensional materials. Reports of one-dimensional defects hosting a Fermi liquid or a TLL have suggested a dependence on the underlying substrate, however, unveiling the physical details of electronic contributions from the substrate require cross-correlative investigation. Here, we study TLL formation within defectively engineered WS_2 atop graphene, where band structure and the atomic environment is visualized with nano angle-resolved photoelectron spectroscopy, scanning tunneling microscopy and spectroscopy, and non-contact atomic force microscopy. Correlations between the local density of states and electronic band dispersion elucidated the electron transfer from graphene into a TLL hosted by one-dimensional metal (1DM) defects. It appears that the vertical heterostructure with graphene and the induced charge transfer from graphene into the 1DM is critical for the formation of a TLL.

In monolayer transition metal dichalcogenides bubbles-nanoscale deformations typically exhibiting a dome-like shape-Excitons are confined by the strain effect, which exhibits extraordinary emission properties, such as single photon generation, enhanced light emission, and spectrally tunable excitonic states. While the strain profiles of these bubbles are extensively studied, this work provides an approach 1) to directly visualize the associated exciton properties in bubbles formed in WSe2 monolayer, revealing an intrinsic emission wavelength shift of ≈40 nm, and 2) actively modify local strain, enabling further exciton emission tuning over a range of 50 nm. These are achieved by emission mapping and nanoindentation using a dielectric near-field probe, which enables the detection of local emission spectra and emission lifetimes within individual bubbles. Statistical analysis of 67 bubbles uncovers an emission wavelength distribution centered around 780 nm. Furthermore, saturation behavior in the power-dependent studies and the associated lifetime change reveal the localized nature of the strain-induced states. These findings provide direct insights into the strain-localized emission dynamics in bubbles and establish a robust framework for non-destructive, reversible, and predictable nanoscale emission control, presenting a potential avenue for developing next-generation tunable quantum optical sources.

Chalcogen vacancies in monolayer transition metal dichalcogenides (TMDs), such as WS_2, play a crucial role in various applications ranging from optoelectronics and catalysis to quantum information science (QIS), making their identification and control essential. This study focuses on WS_2 single vacancy and vacancy pairs. Using first principles computations, we investigate their thermodynamic stabilities and electronic structures. We identify an "on-top" divacancy configuration where two vacancies sit on top of each other to be the only energetically stable complex with a binding energy of 160 meV. We compute a small difference in electronic structure with a shift of the unoccupied state by 140 meV for the divacancy complex and observe electronic state shift during Scanning Tunneling Spectroscopy of a series of vacancy in WS_2 providing spectroscopical evidence for the presence of this defect.

Forming heavily‐doped regions in 2D materials, like graphene, is a steppingstone to the design of emergent devices and heterostructures. Here, a selective‐area approach is presented to tune the work‐function and carrier density in monolayer graphene by spatially synthesizing sub‐monolayer gallium beneath the 2D‐solid. The localized metallic gallium is formed via precipitation from an underlying diamond‐like carbon (DLC) film that is spatially implanted with gallium‐ions. By controlling the interfacial precipitation process with annealing temperature, spatially precise ambipolar tuning of the graphene work‐function is achieved, and the tunning effect preserved upon cooling to ambient conditions. Consequently, charge carrier densities from ≈1.8 × 10 10 cm −2 (hole‐doped) to ≈7 × 10 13 cm −2 (electron‐doped) are realized, confirmed by in situ and ex situ measurements. The theoretical studies corroborated the role of gallium at the heterointerface on charge transfer and electrostatic doping of the graphene overlayer. Specifically, sub‐monolayer gallium facilitates heavy n‐doping in graphene. Extending this doping strategy to other implantable elements in DLC provides a new means of exploring the physics and chemistry of highly‐doped 2D materials.

The family of two-dimensional (2D) carbides and/or nitrides, also known as MXenes, has generated great excitement within the scientific community and has been proposed for a wide variety of applications since its discovery. Despite this attention, there have been only limited studies of the atomically resolved local electronic and physical structure of MXene surfaces strongly affecting the physicochemical properties of these materials. Here, we report local structural, spectroscopic, and chemical investigations of the surfaces of Ti3C2Tx flakes using scanning tunneling microscopy and spectroscopy, closely coupled to theoretical studies. Terminal groups are visualized and characterized, along with surface TiO2 clusters formed upon exposure to air. Fundamental insight into the local electronic and chemical properties associated with different terminal groups on MXenes and their oxidation products is presented.

Point defects in two-dimensional materials are of key interest for quantum information science. However, the space of possible defects is immense, making the identification of high-performance quantum defects extremely challenging. Here, we perform high-throughput (HT) first-principles computational screening to search for promising quantum defects within WS$_2$, which present localized levels in the band gap that can lead to bright optical transitions in the visible or telecom regime. Our computed database spans more than 700 charged defects formed through substitution on the tungsten or sulfur site. We found that sulfur substitutions enable the most promising quantum defects. We computationally identify the neutral cobalt substitution to sulfur (Co$_{\rm S}^{0}$) as very promising and fabricate it with scanning tunneling microscopy (STM). The Co$_{\rm S}^{0}$ electronic structure measured by STM agrees with first principles and showcases an attractive new quantum defect. Our work shows how HT computational screening and novel defect synthesis routes can be combined to design new quantum defects.

behavior in one-dimensional systems has been predicted and shown to occur at semiconductor-to-metal transitions within two-dimensional materials. Reports of mirror twin boundaries (MTBs) hosting a Fermi liquid or a TLL have suggested a dependence on the underlying substrate, however, unveiling the physical details of electronic contributions from the substrate require cross-correlative investigation. Here, we study TLL formation in MTBs within defectively engineered WS 2 atop graphene, where band structure and the atomic environment is visualized with nano angle-resolved photoelectron spectroscopy, scanning tunneling microscopy and scanning tunneling spectroscopy, and non-contact atomic force microscopy. Correlations between the local density of states and electronic band dispersion elucidated the electron transfer from graphene into a TLL hosted by MTB defects. We find that MTB defects can be substantially charged at a local level, which drives a band gap shift by ∼ 0.5

Tip-enhanced photoluminescence (TRPL) is a powerful technique for spatially and spectrally probing local optical properties of 2-dimensional (2D) materials that are modulated by the local heterogeneities, revealing inaccessible dark states due to bright state overlap in conventional far-field microscopy at room temperature. While scattering-type near-field probes have shown the potential to selectively enhance and reveal dark exciton emission, their technical complexity and sensitivity can pose challenges under certain experimental conditions. Here, we present a highly reproducible and easy-to-fabricate near-field probe based on nanoimprint lithography and fiber-optic excitation and collection. The novel near-field measurement configuration provides an ∼3 orders of magnitude out-of-plane Purcell enhancement, diffraction-limited excitation spot, and subdiffraction hyperspectral imaging resolution (below 50 nm) of dark exciton emission. The effectiveness of this high spatial XD mapping technique was then demonstrated through reproducible hyperspectral mapping of oxidized sites and bubble areas.

We investigate the electronic properties of a graphene and α-ruthenium trichloride (α-RuCl3) heterostructure using a combination of experimental techniques. α-RuCl3 is a Mott insulator and a Kitaev material. Its combination with graphene has gained increasing attention due to its potential applicability in novel optoelectronic devices. By using a combination of spatially resolved photoemission spectroscopy and low-energy electron microscopy, we are able to provide a direct visualization of the massive charge transfer from graphene to α-RuCl3, which can modify the electronic properties of both materials, leading to novel electronic phenomena at their interface. A measurement of the spatially resolved work function allows for a direct estimate of the interface dipole between graphene and α-RuCl3. Their strong coupling could lead to new ways of manipulating electronic properties of a two-dimensional heterojunction. Understanding the electronic properties of this structure is pivotal for designing next generation low-power optoelectronics devices.

We investigate the electronic properties of a graphene and α-ruthenium trichloride (hereafter RuCl_3) heterostructure, using a combination of experimental and theoretical techniques. RuCl_3 is a Mott insulator and a Kitaev material, and its combination with graphene has gained increasing attention due to its potential applicability in novel electronic and optoelectronic devices. By using a combination of spatially resolved photoemission spectroscopy, low energy electron microscopy, and density functional theory (DFT) calculations we are able to provide a first direct visualization of the massive charge transfer from graphene to RuCl_3, which can modify the electronic properties of both materials, leading to novel electronic phenomena at their interface. The electronic band structure is compared to DFT calculations that confirm the occurrence of a Mott transition for RuCl_3. Finally, a measurement of spatially resolved work function allows for a direct estimate of the interface dipole between graphene and RuCl_3. The strong coupling between graphene and RuCl_3 could lead to new ways of manipulating electronic properties of two-dimensional lateral heterojunction. Understanding the electronic properties of this structure is pivotal for designing next generation low-power opto-electronics devices.

Individual atomic defects in 2D materials impact their macroscopic functionality. Correlating the interplay is challenging, however, intelligent hyperspectral scanning tunneling spectroscopy (STS) mapping provides a feasible solution to this technically difficult and time consuming problem. Here, dense spectroscopic volume is collected autonomously via Gaussian process regression, where convolutional neural networks are used in tandem for spectral identification. Acquired data enable defect segmentation, and a workflow is provided for machine-driven decision making during experimentation with capability for user customization. We provide a means towards autonomous experimentation for the benefit of both enhanced reproducibility and user-accessibility. Hyperspectral investigations on WS2 sulfur vacancy sites are explored, which is combined with local density of states confirmation on the Au{111} herringbone reconstruction. Chalcogen vacancies, pristine WS2, Au face-centered cubic, and Au hexagonal close-packed regions are examined and detected by machine learning methods to demonstrate the potential of artificial intelligence for hyperspectral STS mapping.

The structure and function of self-assembled monolayers (SAMs) at the nanoscale are determined by the steric and electronic effects of their building blocks. Carboranethiol molecules form pristine monolayers that provide tunable two-dimensional systems to probe lateral and interfacial interactions. Additional omega-functionality, such as carboxyl groups, can be introduced to change the properties of the exposed surfaces. Here, two geometrically similar isomeric m-carborane analogues of m-mercaptobenzoic acid, 1-COOH-7-SH-1,7-C2B10H10 and racem-1-COOH-9-SH-1,7-C2B10H10, are characterized and their SAMs on Au{111} are examined. The latter isomer belongs to the rare group of chiral cage molecules and becomes, to our knowledge, the first example assembled on Au{111}. Although different in symmetry, molecules of both isomers assemble into similar hexagonal surface patterns. The nearest-neighbor spacing of 8.4 +/- 0.4 angstrom is larger than that of non-carboxylated isomers, consistent with the increased steric demands of the carboxyl groups. Computational modeling reproduced this spacing and suggests a tilt relative to the surface normal. However, tilt domains are not observed experimentally, suggesting the presence of strong lateral interactions. Analyses of the influence of the functional groups through the pseudo-aromatic m-carborane skeleton showed that the thiol group attached to either carbon or boron atoms increases the carboxyl group acidity in solution. In contrast, the acidity of the exposed carboxyl group in the SAMs decreases upon surface attachment; computational analyses suggest that the driving force of this shift is the dielectric of the environment in the monolayer as a result of confined intermolecular interactions, proximity to the Au surface, and partial desolvation.

We use simple acid-base chemistry to control the valency in self-assembled monolayers of two different carboranedithiol isomers on Au{111}. Monolayer formation proceeds via Au-S bonding, where manipulation of pH prior to or during deposition enables the assembly of dithiolate species, monothiol/monothiolate species, or combination. Scanning tunneling microscopy (STM) images identify two distinct binding modes in each unmodified monolayer, where simultaneous spectroscopic imaging confirms different dipole offsets for each binding mode. Density functional theory calculations and STM image simulations yield detailed understanding of molecular chemisorption modes and their relation with the STM images, including inverted contrast with respect to the geometric differences found for one isomer. Deposition conditions are modified with controlled equivalents of either acid or base, where the coordination of the molecules in the monolayers is controlled by protonating or deprotonating the second thiol/thiolate on each molecule. This control can be exercised during deposition to change the valency of the molecules in the monolayers, a process that we affectionately refer to as the "can-can." This control enables us to vary the density of molecule-substrate bonds by a factor of 2 without changing the molecular density of the monolayer.

We map buried hydrogen-bonding networks within self-assembled monolayers of 3-mercapto-N-nonylpropionamide on Au{111}. The contributing interactions include the buried S-Au bonds at the substrate surface and the buried plane of linear networks of hydrogen bonds. Both are simultaneously mapped with submolecular resolution, in addition to the exposed interface, to determine the orientations of molecular segments and directional bonding. Two-dimensional mode-decomposition techniques are used to elucidate the directionality of these networks. We find that amide-based hydrogen bonds cross molecular domain boundaries and areas of local disorder.

Carboranethiol molecules self-assemble into upright molecular monolayers on Au{111} with aligned dipoles in two dimensions. The positions and offsets of each molecule's geometric apex and local dipole moment are measured and correlated with sub-Ångström precision. Juxtaposing simultaneously acquired images, we observe monodirectional offsets between the molecular apexes and dipole extrema. We determine dipole orientations using efficient new image analysis techniques and find aligned dipoles to be highly defect tolerant, crossing molecular domain boundaries and substrate step edges. The alignment observed, consistent with Monte Carlo simulations, forms through favorable intermolecular dipole-dipole interactions.

The p-carborane cluster analogue of p-mercaptobenzoic acid, 1-HS-12-COOH-1,12-C2B10H10, has been synthesized and characterized using nuclear magnetic resonance spectroscopy, single-crystal X-ray diffraction analysis, quantum-chemical calculations, and scanning tunneling microscopy. The single-crystal structure and selected packing aspects are discussed and presented in comparison with the two-dimensional periodic arrangements. Scanning tunneling micrographs, recorded under ambient conditions, are used to compare pure monolayers of 1-HS-1,12-C2B10H11 to coadsorbed monolayers of both the parental precursor and carboxyl-functionalized p-carboranethiolate on Au{111}. Monolayers of both constituents are further characterized by X-ray photoelectron spectroscopy, which shows good agreement between the stoichiometry of each pure monolayer and the nominal stoichiometries of the respective molecules. Results indicate that most of the molecules of both derivatives adsorb as thiolates but that a small fraction of each adsorbs as thiols, without complete SH bond scission, and consequently are labile relative to desorption. Wetting-angle measurements confirm the hydrophilic character of monolayers containing the carboxylic acid constituents. Mixed self-assembled monolayers with functionalized constituents of high axial symmetry provide a convenient basis for grafting two- and three-dimensional structures.

The chemistry of nanoscale materials and self-assembled monolayers are largely determined by interfacial properties, structural dimensionality, bonding and lattice structures, and defect types and densities. Bottom-up design strategies differ from prototypical top-down nanofabrication approaches in that the aim is to control and to place single molecules and atoms precisely, which may provide routes to breaking the current lithography limits. Scanning tunneling microscopy (STM) is able to probe the molecular world and to extract information from single molecules, groups of molecules, and even submolecular features. Here, we use STM in both ultrastable and ambient conditions to test the nature of dipolar interactions between molecules, to probe novelbuilding blocks for assembly, to manipulate surface binding modes, to examine a holey graphene framework against chemical deposition as a means in patterning, and to explore the nature of buried hydrogen-bonding networks in self-assembled monolayer matrices. The simultaneous usage of STM in topographic imaging mode and local barrier height (LBH) mode, in an ultrahigh vacuum (≤10-12 torr) and low temperature (4 K) environment, enables the measurement of both molecular topography and the buried dipolar interface. Using a block-matching approach, the correlation between molecular apexes and dipolar extrema is computed, thus enabling the visualization of molecular orientations at the submolecular scale. We also use STM in ambient conditions to examine the assembly of p-mercaptobenzoic acid derivative of carboranethiol on a Au{111} surface, where the carboxyl-modified carboranethiol backbone provides a surface available for further chemical functionality. Adding a second thiol group attachment in 1,2-carboranedithiol and 9,12-carboranedithiol isomers enables the control of valency between neighboring thiol/thiolate attachment sites. The assembly and manipulation of the two different binding modes using simple acid-base chemistry is evaluated and measured at a local level. Two-dimensional graphene has garnered much interest recently due to extraordinary two-dimensional properties. The design and placement of holes within a protecting sheet is tested against the deposition of molecules, where the holey network acts as a mask that may find use in lithographic processing. Hydrogen bonds also exhibit strong dipoles, where STM in simultaneous topographic and LBH mode may be able to measure the topographic map along with buried amide bond dipoles. We use an amide-containing self-assembled network to evaluate the nature of these ‘hidden’ networks at the single-molecule scale. The embodiment of this work aims to provide a fundamental understanding of chemical properties at the nanoscale and a complementary tool with averaging and ensemble techniques.

We demonstrate the use of "holey" graphene as a mask against molecular adsorption. Prepared porous graphene is transferred onto a Au{111} substrate, annealed, and then exposed to dilute solutions of 1-adamantanethiol. In the pores of the graphene lattice, we find islands of organized, self-assembled molecules. The bare Au in the pores can be regenerated by postdeposition annealing, and new molecules can be self-assembled in the exposed Au region. Graphene can serve as a robust, patternable mask against the deposition of self-assembled monolayers.