During a medicinal chemistry campaign to identify inhibitors of the hepatitis C virus nonstructural protein 5B (RNA-dependent RNA polymerase), a bicyclo[1.1.1]pentane was introduced into the chemical scaffold to improve metabolic stability. The inhibitors bearing this feature, 5-(3-(bicyclo[1.1.1]pentan-1-ylcarbamoyl)-4-fluorophenyl)-2-(4-fluorophenyl)-N-methyl-6-(3,3,3-trifluoropropyl)furo[2,3-b]pyridine-3-carboxamide (1) and 5-(3-(bicyclo[1.1.1]pentan-1-ylcarbamoyl)phenyl)-2-(4-fluorophenyl)-N-methyl-6-(3,3,3-trifluoropropyl)furo[2,3-b]pyridine-3-carboxamide (2), exhibited low turnover in incubations with liver S9 or hepatocytes (rat, human), with hydroxylation of the bicyclic moiety being the only metabolic pathway observed. In subsequent disposition studies using bile-duct-cannulated rats, the metabolite profiles of bile samples revealed, in addition to multiple products of bicyclopentane-oxidation, unexpected metabolites characterized by molecular masses that were 181 Da greater than those of 1 or 2. Further LC/MSn and NMR analysis of the isolated metabolite of 1 demonstrated the presence of a phosphocholine (POPC) moiety bound to the methine carbon of the bicyclic moiety through an ester bond. The POPC conjugate of the NS5B inhibitors was assumed to result from two sequential reactions: hydroxylation of the bicyclic methine to a tertiary alcohol and addition of POPC by CDP-choline: 1,2-diacylglycerol cholinephosphotransferase, an enzyme responsible for the final step in the biosynthesis of phosphatidylcholine. However, this pathway could not be recapitulated using CDP-choline-supplemented liver S9 or hepatocytes due to inadequate formation of the hydroxylation product in vitro. The observation of this unexpected pathway prompted concerns about the possibility that 1 and 2 might interfere with routine phospholipid synthesis. These results demonstrate the participation in xenobiotic metabolism of a process whose function is ordinarily limited to the synthesis of endogenous compounds.

High-performance liquid chromatography (HPLC) biogram methodology is a powerful pharmaceutical screening hit confirmation strategy that couples analytical HPLC data with functional bioassay data. It is used primarily for screening hit chemical validation and triaging in support of early phase discovery programs and enables further investigation of the source of bioactivity in screening hits. The process combines semi-preparative separation technologies, automated compound handling and distribution, high-throughput biological screening, and informatics tools. The final output is an HPLC retention time versus bioactivity graphical overlay report. In this manner, biograms allow the analyst to determine which component in the sample is responsible for the biological activity, enabling decision making toward chemotype selection and prioritization from a pool of potential candidates. Another powerful aspect of the biogram assay lies in its utility in investigating biological activity in atypical samples, such as degraded samples or mixtures, for detection of minor active impurities or in addressing lot-to-lot activity discrepancies for a given test compound. Biograms are employed to track, isolate, and identify the source of biological activity in such samples, often yielding important information for program decisions.

Plastic labware is used in all processes of modern pharmaceutical research, including compound storage and biological assays. The use of these plastics has created vast increases in productivity and cost savings as experiments moved from glass test tubes and capillary pipettes to plastic microplates and multichannel liquid handlers. One consequence of the use of plastic labware, however, is the potential release of contaminants and their resultant effects on biological assays. We report herein the identification of biologically active substances released from a commonly used plastic microplate. The active contaminants were identified by gas chromatography–mass spectroscopy as dodecan-1-ol, dodecyl 3-(3-dodecoxy-3-oxopropyl)sulfanylpropanoate, and dodecanoic acid, and they were found to be selective monoamine oxidase-B inhibitors.

Hydrophilic peptides present great challenges for LC-MS analysis. Although the LC-MS method provides specificity and sensitivity, sample preparation is critical for bioanalytical assay performance. A practical sample preparation approach for improving the LC-MS analysis of hydrophilic peptides was developed, using hydrophilic isoforms of the Amyloid-β peptides as an example. A typical sample preparation procedure for peptides from biological matrices employs immunoaffinity purification; however, the high content of organic solvent in the elution buffer may cause insufficient chromatographic retention of the analytes on a RPLC column. By utilizing lyophilization or speed-vacuum drying followed by reconstitution with an aqueous solvent, the subsequent LC-MS bioanalysis showed these polar peptides being retained on the RPLC column and also an improved MS response. This approach is applicable for analytical studies on hydrophilic peptides in biological matrices.

An investigation begun in 1979 directed at the Republic of Palau marine sponge Agelas axifera Hentschel for cancer cell growth inhibitory constituents subsequently led to the isolation of three new pyrimidine diterpenes designated axistatins 1 (1), 2 (2), and 3 (3), together with the previously reported formamides 4, 5, and agelasine F (6). The structures were elucidated by analysis of 2D-NMR spectra and by HRMS. All of the isolated compounds were found to be moderate inhibitors of cancer cell growth. Axistatins 1-3 (1-3), formamide 4, and agelasine F (6) also exhibited antimicrobial activity.

The recent development of a Hepatitis C virus (HCV) infectious virus cell culture model system has facilitated the development of whole-virus screening assays which can be used to interrogate the entire virus life cycle. Here, we describe the development of an HCV growth assay capable of identifying inhibitors against all stages of the virus life cycle with assay throughput suitable for rapid screening of large-scale chemical libraries. Novel features include, 1) the use of an efficiently-spreading, full-length, intergenotypic chimeric reporter virus with genotype 1 structural proteins, 2) a homogenous assay format compatible with miniaturization and automated liquid-handling, and 3) flexible assay end-points using either chemiluminescence (high-throughput screening) or Cellomics ArrayScan™ technology (high-content screening). The assay was validated using known HCV antivirals and through a large-scale, high-throughput screening campaign that identified novel and selective entry, replication and late-stage inhibitors. Selection and characterization of resistant viruses provided information regarding inhibitor target and mechanism. Leveraging results from this robust whole-virus assay represents a critical first step towards identifying inhibitors of novel targets to broaden the spectrum of antivirals for the treatment of HCV.

The iminothiazolidinone BMS-858 (2) was identified as a specific inhibitor of HCV replication in a genotype 1b replicon assay via a high-throughput screening campaign. A more potent analogue, BMS-824 (18), was used in resistance mapping studies, which revealed that inhibitory activity was related to disrupting the function of the HCV nonstructural protein 5A. Despite the development of coherent and interpretable SAR, it was subsequently discovered that in DMSO 18 underwent an oxidation and structural rearrangement to afford the thiohydantoin 47, a compound with reduced HCV inhibitory activity. However, HPLC bioassay fractionation studies performed after incubation of 18 in assay media led to the identification of fractions containing a dimeric species 48 that exhibited potent antiviral activity. Excision of the key elements hypothesized to be responsible for antiviral activity based on SAR observations reduced 48 to a simplified, symmetrical, pharmacophore realized most effectively with the stilbene 55, a compound that demonstrated potent inhibition of HCV in a genotype 1b replicon with an EC50 = 86 pM.

ABSTRACT The exceptional in vitro potency of the hepatitis C virus (HCV) NS5A inhibitor BMS-790052 has translated into an in vivo effect in proof-of-concept clinical trials. Although the 50% effective concentration (EC50) of the initial lead, the thiazolidinone BMS-824, was ∼10 nM in the replicon assay, it underwent transformation to other inhibitory species after incubation in cell culture medium. The biological profile of BMS-824, including the EC50, the drug concentration required to reduce cell growth by 50% (CC50), and the resistance profile, however, remained unchanged, triggering an investigation to identify the biologically active species. High-performance liquid chromatography (HPLC) biogram fractionation of a sample of BMS-824 incubated in medium revealed that the most active fractions could readily be separated from the parental compound and retained the biological profile of BMS-824. From mass spectral and nuclear magnetic resonance data, the active species was determined to be a dimer of BMS-824 derived from an intermolecular radical-mediated reaction of the parent compound. Based upon an analysis of the structural elements of the dimer deemed necessary for anti-HCV activity, the stilbene derivative BMS-346 was synthesized. This compound exhibited excellent anti-HCV activity and showed a resistance profile similar to that of BMS-824, with changes in compound sensitivity mapped to the N terminus of NS5A. The N terminus of NS5A has been crystallized as a dimer, complementing the symmetry of BMS-346 and allowing a potential mode of inhibition of NS5A to be discussed. Identification of the stable, active pharmacophore associated with these NS5A inhibitors provided the foundation for the design of more potent inhibitors with broad genotype inhibition. This culminated in the identification of BMS-790052, a compound that preserves the symmetry discovered with BMS-346.

(S)-5-Chloro-1-(1-cyclopropylethyl)-3-(2,6-dichloro-4-(trifluoromethyl)phenylamino)pyrazin-2(1H)-one (BMS-665053), a pyrazinone-containing compound, is a potent and selective antagonist of corticotropin-releasing factor receptor-1 (CRF-R1) that showed efficacy in the defensive withdrawal model for anxiety in rats, suggesting its use as a potential treatment for anxiety and depression. In vitro metabolism studies of BMS-665053 in rat and human liver microsomes revealed cytochrome P450-mediated oxidation of the pyrazinone moiety, followed by ring opening, as the primary metabolic pathway. Detection of a series of GSH adducts in trapping experiments suggested the formation of a reactive intermediate, probably as a result of epoxidation of the pyrazinone moiety. In addition, BMS-665053 (20 mg/kg i.v.) underwent extensive metabolism in bile duct-cannulated (BDC) rats. The major drug-related materials in rat plasma were the pyrazinone oxidation products. In rat bile and urine (0-7 h), only a trace amount of the parent drug was recovered, whereas significant levels of the pyrazinone epoxide-derived metabolites and GSH-related conjugates were detected. Further evidence suggested that GSH-related conjugates also formed at the dichloroarylamine moiety possibly via an epoxide or a quinone imine intermediate. Other major metabolites in BDC rat bile and urine included glucuronide conjugates. To reduce potential liability due to metabolic activation of BMS-665053, a number of pyrazinone analogs with different substituents were synthesized and investigated for reactive metabolite formation, leading to the discovery of a CRF-R1 antagonist with diminished in vitro metabolic activation.

Preserving the integrity of the compound collection and providing high-quality materials for drug discovery in an efficient and cost-effective manner are 2 major challenges faced by compound management (CM) at Bristol-Myers Squibb (BMS). The demands on CM include delivering hundreds of thousands of compounds a year to a variety of operations. These operations range from single-compound requests to hit identification support and just-in-time assay plate provision for lead optimization. Support needs for these processes consist of the ability to rapidly provide compounds as solids or solutions in a variety of formats, establishing proper long- and short-term storage conditions and creating appropriate methods for handling concentrated, potent compounds for delivery to sensitive biological assays. A series of experiments evaluating the effects of processing compounds with volatile solvents, storage conditions that can induce freeze/thaw cycles, and the delivery of compounds were performed. This article presents the results of these experiments and how they affect compound integrity and the accuracy of compound management processes. (Journal of Biomolecular Screening 2009:476-484)

Disposable plastic labware is ubiquitous in contemporary pharmaceutical research laboratories. Plastic labware is routinely used for chemical compound storage and during automated liquid-handling processes that support assay development, high-throughput screening, structure-activity determinations, and liability profiling. However, there is little information available in the literature on the contaminants released from plastic labware upon DMSO exposure and their resultant effects on specific biological assays. The authors report here the extraction, by simple DMSO washing, of a biologically active substance from one particular size of disposable plastic tips used in automated compound handling. The active contaminant was identified as erucamide ((Z)-docos-13-enamide), a long-chain mono-unsaturated fatty acid amide commonly used in plastics manufacturing, by gas chromatography/mass spectroscopy analysis of the DMSO-extracted material. Tip extracts prepared in DMSO, as well as a commercially obtained sample of erucamide, were active in a functional bioassay of a known G-protein-coupled fatty acid receptor. A sample of a different disposable tip product from the same vendor did not release detectable erucamide following solvent extraction, and DMSO extracts prepared from this product were inactive in the receptor functional assay. These results demonstrate that solvent-extractable contaminants from some plastic labware used in the contemporary pharmaceutical research and development (R&D) environment can be introduced into physical and biological assays during routine compound management liquid-handling processes. These contaminants may further possess biological activity and are therefore a potential source of assay-specific confounding artifacts.

In order to improve aqueous solubility of nocathiacin I (1), a potent antibacterial agent, N-demethylation of the amino-sugar moiety was sought. Irradiation of 1 in DMF/CH(2)Cl(2) with UV light of 380 nm led to a cyclic product 2, which was hydrolyzed to yield the desired nocathiacin VI (3). Treatment of 1 with shorter UV light caused trans-cis isomerization of a c-c double bond.

Two new cytotoxic xanthones were isolated from extracts of the Madagascar rain forest plant Psorospermum cf. molluscum using bioassay-guided fractionation with the Escherichia coli SOS chromotest. The structures of the new dihydrofuranoxanthones, designated 3',4'-deoxy-4'-chloropsoroxanthin-(3',5'-diol) ( 1) and psoroxanthin ( 4), were determined on the basis of 2D-NMR, MS, and UV spectroscopic data and are structurally related to the psorospermins, a known class of plant antitumor agents. A new hydroxyprenylated xanthone ( 5) is also described. Xanthones 1 and 4 showed selective in vitro cytotoxicity against ABAE cells (bovine endothelial cell line).

5-Isopropyl-6-(5-methyl-1,3,4-oxadiazol-2-yl)-N-(2-methyl-1H-pyrrolo[2,3-b]pyridin-5-yl)pyrrolo[2,1-f][1,2,4]triazin-4-amine (BMS-645737) is a potent and selective vascular endothelial growth factor receptor-2 antagonist. In this study, liquid chromatography/tandem mass spectrometry and NMR were used to investigate the biotransformation of BMS-645737 in vitro and in the cynomolgus monkey, dog, mouse, and rat. Metabolic pathways for BMS-645737 included multistep processes involving both oxidation and conjugation reactions. For example, the 2-methyl-1H-pyrrolo moiety underwent cytochrome P450-catalyzed hydroxylation followed by oxidation to a carboxylic acid and then conjugation with taurine. Alternatively, the 5-methyl-1,3,4-oxadiazol-2-yl moiety was metabolized by hydroxylation and then conjugation with sulfate. The pyridin-5-yl group underwent direct glucuronidation in hepatocytes (dog, monkey, human) and conjugation with N-acetylglucosamine in the monkey. Conjugation with glutathione and processing along the mercapturic acid pathway was a minor metabolic pathway in vivo, although BMS-645737 did not form conjugates in the presence of glutathione-supplemented liver microsomes. Other minor biotransformation pathways included oxidative dehydrogenation, dihydroxylation, and hydrolytic opening of the oxadiazole ring followed by either deacetylation or hydrolysis of the resulting diacyl hydrazide. Whereas previous studies have shown the formation of N-acetylglucosamine conjugates of alcohols, arylamines, and other small molecules, this report describes the biotransformation of a heterocyclic aromatic amine via direct conjugation with N-acetylglucosamine.

We report here the observation of OH…N hydrogen‐bond 1hJN, OH scalar coupling in a biologically active natural product. The intramolecular hydrogen bond between the threonine hydroxyl (Thr‐OH) group and the thiazolyl nitrogen at the second thiazole ring (Thz‐2) in nocathiacin I was directly detected by a 1H15N HMBC NMR experiment. The magnitude of the scalar coupling constant 1hJN, OH was accurately measured to be 1.8 ± 0.1 Hz by a J‐resolved 1H15N HMBC experiment. By adding the OH…N distance restraint, the 3D solution structure of nocathiacin I was refined. The structure refinement indicated that the distance between the Thr‐3 hydroxyl hydrogen and the Thz‐2 nitrogen is ⩽2.50 Å in all the refined structures, and there are no NOE restraint violations ≥ 0.23 Å. The presence of an intramolecular hydrogen bond in nocathiacin I is further supported by a number of NMR parameters and additional NMR experiments. This observation provides valuable information for characterizing molecular conformations, and for studying structure‐activity relationships. Copyright © 2007 John Wiley & Sons, Ltd.