Complexes with weakly coordinating ligands are often formed in chemical reactions and can play key roles in determining the reactivity, particularly in catalytic reactions. Using time-resolved X-ray absorption fine structure (XAFS) spectroscopy in combination with time-resolved IR (TRIR) spectroscopy and tungsten hexacarbonyl, W(CO)6, we are able to structurally characterize the formation of an organometallic alkane complex, determine the W-C distances, and monitor the reactivity with silane to form an organometallic silane complex. Experiments in perfluorosolvents doped with xenon afford initially the corresponding solvated complex, which is sufficiently reactive in the presence of Xe that we can then observe the coordination of Xe to the metal center, providing a unique insight into the metal-xenon bonding. These results offer a step toward elucidating the structure, bonding, and chemical reactivity of transient species by X-ray absorption spectroscopy, which has sensitivity to small structural changes. The XAFS results indicate that the bond lengths of metal-alkane (W-H-C) bond in W(CO)5(heptane) as 3.07 (±0.06) Å, which is longer than the calculated W-C (2.86 Å) for binding of the primary C-H, but shorter than the calculated W-C (3.12 Å) for the secondary C-H. A statistical average of the calculated W-C alkane bond lengths is 3.02 Å, and comparison of this value indicates that the value derived from the XAFS measurements is averaged over coordination of all C-H bonds consistent with alkane chain walking. Photolysis of W(CO)6 in the presence of HSiBu3 allows the conversion of W(CO)5(heptane) to W(CO)5(HSiBu3) with an estimated W-Si distance of 3.20 (±0.03) Å. Time-resolved TRIR and XAFS experiments following photolysis of W(CO)6 in perfluoromethylcyclohexane (PFMCH) allows the characterization of W(CO)5(PFMCH) with a W-F distance of 2.65 (±0.06) Å, and doping PFMCH with Xe allows the characterization of W(CO)5Xe with a W-Xe bond length of 3.10 (±0.02) Å.

The effect of ceria doping by oxide surface modification and controlled metal surface modification (CSM) on the structure-function properties of Rh/gamma-Al2O3 catalysts in the process of CO oxidation were studied by a combined array of Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS)/Energy Dispersive X-ray Absorption Fine Structure/Mass Spectrometry techniques applied simultaneously under time-resolved, in situ conditions in the temperature range of 298-573 K. The addition of each promoter element by CSM exhibits multiple effects on the catalysts structure. The DRIFTS/XAS studies indicate that CeOx facilitate the protection of Rh particles against extensive oxidation in atmospheres of air, O-2 and CO, without reducing the coverage of oxidisable adsorbed CO.

Freeze-quench XAFS reveals initial methylation of the Cr(iii) precursor prior to reduction to Lewis-acid dependent Cr(ii) species.

Visualising chemical reactions by X-ray methods is a tantalising prospect. New light sources provide the prospect for studying atomic, electronic and energy transfers accompanying chemical change by X-ray spectroscopy and inelastic scattering. Here we assess how this adventure can illuminate inorganic and catalytic chemistry. In particular X-ray inelastic scattering provides a means of exploiting X-ray free electron lasers, as a parallel to laser Raman spectroscopy.

Homogeneous chromium catalysts for the selective conversion of ethene to hex-1-ene are formed from Cr(III) reagents, aminothioether ligands of the type HN(CH2CH2SR)(2), and aluminum reagents. In this study, the early activation steps are investigated by EPR, UVvisible, and Cr K-edge XAFS spectroscopy; rapid stopped-flow mixing and a freeze-quench allows good quality EXAFS analysis of a species formed in similar to 1 s of reaction. This is shown to involve reduction to Cr(II) and deprotonation of a NH group of the auxiliary ligand. This 4-coordinate metal center may act as precursor for the coordination of ethene and subsequent selective oligomerization.

The effects of ceria and zirconia on the structure-function properties of supported rhodium catalysts (1.6 and 4 wt% Rh/gamma-Al2O3 ) during CO exposure are described. Ceria and zirconia are introduced through two preparation methods: 1) ceria is deposited on gamma-Al2O3 from [Ce(acac)(3)] and rhodium metal is subsequently added, and 2) through the controlled surface modification (CSM) technique, which involves the decomposition of [M(acac)(x)] (M=Ce, x=3; M=Zr, x=4) on Rh/gamma-Al2O3 . The structure-function correlations of ceria and/or zirconia-doped rhodium catalysts are investigated by diffuse reflectance infrared Fourier-transform spectroscopy/energy-dispersive extended X-ray absorption spectroscopy/mass spectrometry (DRIFTS/EDE/MS) under time-resolved, in situ conditions. CeOx and ZrO2 facilitate the protection of Rh particles against extensive oxidation in air and CO. Larger Rh core particles of ceriated and zirconiated Rh catalysts prepared by CSM are observed and compared with Rh/gamma-Al2O3 samples, whereas supported Rh particles are easily disrupted by CO forming mononuclear Rh geminal dicarbonyl species. DRIFTS results indicate that, through the interaction of CO with ceriated Rh particles, a significantly larger amount of linear CO species form; this suggests the predominance of a metallic Rh phase.

Scandium trichloride complexes with tridentate N(3)- and S(2)N-donor ligands (L(3)) have been synthesised and characterised by IR, (1)H, (13)C{(1)H} and (45)Sc NMR spectroscopy, microanalysis, and solid state and solution XAFS spectroscopy. Catalytic testing of a subset of these complexes with ethene has been undertaken in chlorobenzene with MMAO-3A and PMAO-IP at 60 °C and 40 bar ethene, giving low activity ethene polymerisation. The reactions of these complexes with MeLi and AlMe(3) were studied by (1)H, (13)C{(1)H}, (27)Al and (45)Sc NMR spectroscopy and in situ via Sc K-edge XAFS spectroscopy. Three or four mol. equivalents of MeLi react with [ScCl(3)(Me(3)-tacn)] in THF solution to form [ScMe(3)(Me(3)-tacn)] cleanly, while complexes of type [ScCl(3)(R-SNS)] {R-SNS = HN(CH(2)CH(2)SC(10)H(21))(2)} form two different species proposed to be [ScMe(3)(R-SN(Li)S)] and [ScMe(2)(R-SN(-)S)]. In contrast, in situ(45)Sc NMR and Sc K-edge XAFS spectroscopic studies of the reaction of [ScCl(3)(Me(3)-tacn)] with 10 mol. equivalents of AlMe(3) strongly suggest that alkylation at the Sc(III) centre does not occur, instead retaining the Cl(3)N(3) coordination environment and most likely forming Sc-Cl-AlMe(3) bridging interactions. Similar studies on [ScCl(3)(decyl-SNS)] with 10 mol. equivalents of AlMe(3) are also consistent with this, indicating that alkylation at the Sc centre does not occur except in the presence of co-catalyst [Ph(3)C][Al{OC(CF(3))(3)}(4)] and the α-alkene, hex-1-ene.

Energy dispersive X-ray absorption spectroscopy (ED-XAS), in which the whole XAS spectrum is acquired simultaneously, has been applied to reduce the real-time for acquisition of spectra of photoinduced excited states by using a germanium microstrip detector gated around one X-ray bunch of the ESRF (100 ps). Cu K-edge XAS was used to investigate the MLCT states of [Cu(dmp)2]+ (dmp =2,9-dimethyl-1,10-phenanthroline) and [Cu(dbtmp)2]+ (dbtmp =2,9-di-n-butyl-3,4,7,8-tetramethyl-1,10-phenanthroline) with the excited states created by excitation at 450 nm (10 Hz). The decay of the longer lived complex with bulky ligands, was monitored for up to 100 ns. DFT calculations of the longer lived MLCT excited state of [Cu(dbp)2]+ (dbp =2,9-di-n-butyl-1,10-phenanthroline) with the bulkier diimine ligands, indicated that the excited state behaves as a Jahn–Teller distorted Cu(II) site, with the interligand dihedral angle changing from 83 to 60° as the tetrahedral coordination geometry flattens and a reduction in the Cu–N distance of 0.03 Å.

The effects of the addition of ceria and zirconia on the structural properties of supported rhodium catalysts (1.6 and 4 wt % Rh/γ-Al2O3) are studied. Ceria and zirconia are deposited by using two preparation methods. Method I involves the deposition of ceria on γ-Al2O3 from Ce(acac)3, and the rhodium metal is subsequently added, whereas method II is based on a controlled surface reaction technique, that is, the decomposition of metal-organic M(acac)x (in which M=Ce, x=3 and M=Zr, x=4) on Rh/γ-Al2O3. The structures of the prepared catalyst materials are characterized ex situ by using N2 physisorption, transmission electron microscopy, high-angle annular dark-field scanning transmission election microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy (XPS), and X-ray absorption fine structure spectroscopy (XAFS). All supported rhodium systems readily oxidize in air at room temperature. By using ceriated and zirconiated precursors, a larger rhodium-based metallic core fraction is obtained in comparison to the undoped rhodium catalysts, suggesting that ceria and zirconia protect the rhodium particles against extensive oxidation. XPS results indicate that after the calcination and reduction treatments, a small amount of chlorine is retained on the support of all rhodium catalysts. EXAFS analysis shows significant Rh-Cl interactions for Rh/Al2O3 and Rh/CeOx /Al2O3 (method I) catalysts. After reaction with H2/He in situ, for series of samples with 1.6 wt % Rh, the EXAFS first shell analysis affords a mean size of approximately 30 atoms. A broader spread is evident with a 4 wt % rhodium loading (ca. 30-110 atoms), with the incorporation of zirconium providing the largest particle sizes.

Microscopic structures of monodispersed rhodium dicarbonyl species chemisorbed on a ceramic metal-oxide support (gamma-alumina) have been obtained by density functional theory (DFT) calculations with periodic boundary conditions applied. Several minimum energy structures of species were obtained and their relative energies indicate that, in the most energetically stable geometry, the rhodium atom is coordinated in a square-planar environment and forms a four-membered Rh-O-Al-O ring, with one Al atom octahedrally coordinated. Another docking geometry, close lying in energy, also has a square-planar coordination for the rhodium atom and involves a six-membered Rh-OAl-O-Al-O ring with one Al octahedrally coordinated and one Al tetrahedrally coordinated. Computed bond lengths were found to be in reasonable agreement with experimental bond lengths as determined by EXAFS spectroscopy. Theoretical Rh K-edge XANES spectra suggest that the pre-edge region probes electronic states localized on the Rh-I(CO)(2) unit, while postedge features probe the electronic states arising from the Rh-I(CO)(2) interaction with the support, which partly depends on the docking geometry of the Rh-I(CO)(2) units.

The activation of [MoX3(L)] (with X = Cl, Br; L = tridentate ligands with S3 and SNS donor sets) by AlMe3, analogous to the industrially important [CrCl3(L)] catalysts for selective oligomerisation of alkenes, has been investigated by Mo K-edge X-ray absorption (XAS) and UV–visible spectroscopies. Time-resolved stopped-flow XAS, in combination with a newly developed anaerobic freeze-quench approach, have established the complete alkylation of the Mo centres and a slower, stepwise sequence for [MoBr3(L)]. No evidence for directly bonded or bridged Mo–Mo dimers was observed at the high Mo:AlMe3 ratios used in this study. Decomposition of the complexes is in competition with the activation and resulted in precipitation of particulate Mo over time and explains the deactivation as observed in catalytic tests. The novel freeze-quench approach, which can trap reaction solutions within 1 s of mixing, opens up a large field of homogeneous catalysis and liquid chemistry to be studied, being able to quench this rapidly, whilst characterisation techniques with long data acquisition can be performed.

To design and optimise efficient supported catalysts, the detailed structural and electronic properties as a function of performance are required. This chapter describes characterisation methods which can be applied ex situ (before and after catalysis) as well as in situ or operand (during catalysis, under process conditions). We focus on spectroscopic techniques, i.e. IR, NMR and XAS, the combination which will shown to be specially good for supported organometallic systems, providing complementary insights in structural and electronic properties of support, ligand and reactant coordination to the metal site and the metal site itself. Selected organometallic systems are chosen to demonstrate the strengths and limitations of the individual and combined techniques.

A series of distorted octahedral Cr(III) complexes containing tridentate S-, S/O- or N-donor ligands comprised of three distinct architectures: facultative {S(CH(2)CH(2)SC(10)H(21))(2) (L(1)) and O(CH(2)CH(2)SC(10)H(21))(2) (L(2))}, tripodal {MeC(CH(2)S(n)C(4)H(9))(3) (L(3)), MeC(CH(2)SC(10)H(21))(3) (L(4))} and macrocyclic {(C(10)H(21))[9]aneN(3) (L(5)), (C(10)H(21))(3)[9]aneN(3) (L(6)), with [9]aneN(3)=1,4,7-triazacyclononane} are reported and characterised spectroscopically. Activation of [CrCl(3)(L)] with MMAO produces very active ethylene trimerisation, oligomerisation and polymerisation catalysts, with significant dependence of the product distribution upon the ligand type present. The properties of the parent [CrCl(3)(L)] complexes are probed by cyclic voltammetry, UV-visible, EPR, EXAFS and XANES measurements, and the effects upon activation with Me(3)Al investigated similarly. Treatment with excess Me(3)Al leads to substitution of Cl ligands by Me groups, generation of an EPR silent Cr species (consistent with a change in the oxidation state of the Cr to either Cr(II) or Cr(IV)) and substantial dissociation of the neutral S and S/O-donor ligands.

X-ray absorption fine structure (XAFS) spectroscopy probes the structure and electronic properties of metal centers. Because it can be applied to noncrystalline materials, it is a key technique for probing nanoparticulate materials, such as colloidal and heterogeneous metal catalysts. The high brilliance of modern synchrotron radiation x-ray sources facilitates in situ studies, which provide direct structure–function relationships with both spatial and time resolution; this is especially effective when applied in combination with complementary techniques such as x-ray diffraction, mass spectrometry, and optical or vibrational spectroscopies. Tracking the particle formation of platinum-group metal catalysts, their behavior under reaction conditions, and the distribution of sites within a catalyst bed shows that this approach is essential for understanding the chemistry of these nanoparticles. Rather than behave as monolithic entities, nanoparticulate catalysts undergo rapid structural transformations induced by the gas environment and reaction conditions, and their lifetimes as catalysts depend on the reversibility of these changes.

Energy dispersive extended X-ray absorption fine structure spectroscopy (ED-XAFS), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and mass spectrometry (MS), have been combined for the structure-function study of Rh and RhPd supported catalysts for the reduction of NO by CO. The combined results show that although alloying of Rh with Pd prevents the dissociative oxidation of the Rh by NO, it does not prevent the extensive disruptive oxidation of Rh by CO. The influence of oxidative disruption by molecular CO in such systems may therefore be far more pervasive and catalytically important than has been previously observed. The overall metal particle size observed in the RhPd alloy system during the CO/NO reaction is significantly larger than for the Rh-only system for the entire temperature range employed. The catalytically active sites, however, are likely to be similar, with the overall activity of the alloy system to be reduced due to inactive RhPd alloy nanoparticles.

In stetem Wandel: Simultane zeitauflösende EXAFS- und IR-spektroskopische Studien unter den Bedingungen der katalytischen NO/CO-Umsetzung zeigen, dass die Rhodiumatome in Rh/Al2O3 (5 Gew.- %) je nach Gaszusammensetzung schnell zwischen CO-besetzten Rh-Partikeln und einkernigen Rh-NO-Positionen wechseln. Bei niedriger Temperatur (473 K) wandeln sich einkernige Rh(CO)2- und Rh(NO)-Zentren ineinander um.

The high throughput synthesis and characterization of a particular family of ceramic materials, bismuth molybdenum vanadium oxides (BiMoVOX), suitable as inorganic yellow pigments and low temperature oxidation catalysts, is described. Samples, synthesized by calcination and peroxo sol-gel methods, are characterized by X-ray powder diffraction, UV-visible and XAFS spectroscopy. A combined high-throughput XRD/XAFS study of a 54 samples array, with simultaneous refinement of data of both techniques, has been performed. Molybdenum doping of bismuth vanadate results in a phase transition from monoclinic BiVO4 to tetragonal Bi(V,Mo)O-4, both of scheelite type. Both central metals, V5+ and Mo6+, remain in a tetrahedral coordination. UV/visible spectroscopy identifies a linear blue shift as a function of Mo6+ amount.

Energy‐dispersive X‐ray absorption Spectroscopy is an increasingly powerful tool for the investigation of kinetic processes in chemical systems as an element‐specific local structure and electronic‐state probe. In this paper we present a study of the structural evolution of the inner‐sphere electron transfer reaction between [IrCl6]2− and [Co(CN)5]3−. The experimental requirements necessary for the extraction of maximal structural and electronic information are discussed.