Abstract Background Antimicrobial peptides (AMPs) such as pediocin PA-1 are attractive for food biopreservation and infection control, but their broader use is limited by low recombinant yields and high production costs. Corynebacterium glutamicum has emerged as a robust GRAS chassis for heterologous peptide and protein production, yet commonly used shuttle vectors provide only moderate plasmid copy numbers and expression capacities. In particular, existing pediocin PA-1 processes in C. glutamicum rely on standard pBL1- or pCG1-family vectors that do not yet leverage replication-origin engineering. Results We rationally redesigned the replication control region of the widely used pClik 5α (pCG1-family) backbone by introducing targeted mutations in the repA gene, an antisense RNA (cgrI) promoter, and putative partitioning genes parAB, and constructed a systematic panel of high-copy variants. Using a P tuf -driven mCherry reporter as a quantitative readout, we identified plasmids that supported several-fold higher fluorescence than the parental backbone while maintaining robust growth. Fluorescence-based gene-dosage estimation indicated a strong increase in apparent plasmid copy number. Independent qPCR-based plasmid copy number determination using two plasmid loci confirmed that the lead variant pClik 5α repA mut reached approximately 28–30 copies per chromosome equivalent, compared to approximately 2–3 copies for the parental plasmid, corresponding to an approximately 10-fold increase. Genome-wide transcriptome analysis revealed a defined and adaptive transcriptional response to elevated plasmid copy number and expression burden, characterized by adjustments in membrane-associated transport, respiratory functions, and amino acid-related metabolism, without evidence of collapse of core biosynthetic functions. When the best-performing replicon was applied to episomal expression of a codon-optimized pedACD Cgl operon, pediocin PA-1 titers increased by 2.5-fold compared to the best pXMJ19-based reference under identical, previously optimized process conditions, placing the system, under comparable cultivation formats, within the upper range of reported microbial pediocin production processes. Conclusions This work demonstrates that rational engineering of pCG1-family replication modules in C. glutamicum can unlock markedly higher plasmid copy numbers and expression capacities while preserving physiological robustness. The resulting high-copy pClik 5α derivatives, exemplified by pClik 5α repA mut , provide a versatile high-copy expression platform with demonstrated utility for recombinant reporter protein and antimicrobial peptide production in C. glutamicum and offer a foundation for further integration with folding, secretion, and process engineering strategies to advance industrial AMP production.

Efficient microbial conversion of heterogeneous carbohydrate mixtures remains a central bottleneck in industrial biotechnology, yet scalable chassis architectures capable of coordinated multi-sugar utilization are limited. Recently, substrate-informed metabolic alignment enabled balanced glucose-xylose co-utilization in Corynebacterium glutamicum. Here, we examine whether this alignment principle is scalable and transferable to complex industrial feedstocks. We progressively expanded the substrate spectrum of C. glutamicum through genome-encoded integration of mannose, xylose, arabinose, galactose, and rhamnose utilization modules, establishing a stable seven-sugar chassis. Rather than relying on adaptive evolution or high-copy expression, pathway capacities were quantitatively aligned with native uptake and central metabolism. Progressive expansion increased total volumetric carbon uptake and attenuated substrate hierarchy without compromising transcriptional stability. Complementary 13C tracer experiments showed that carbon from all seven sugars was incorporated into biomass in proportion to substrate utilization while revealing characteristic precursor-level incorporation patterns consistent with their distinct metabolic entry routes. Using authentic spent sulfite liquor (SSL) as a chemically heterogeneous validation substrate, the engineered strain achieved near-complete depletion of all fermentable sugars and substantially accelerated conversion kinetics compared to the wild type. Transfer of the aligned substrate module into a glucose-optimized glutarate production strain enabled sustained fed-batch conversion of SSL to 30 g L-1 glutarate without pathway erosion or performance decline. Together, these results demonstrate that substrate-informed metabolic engineering can provide a scalable and industrially transferable strategy for chassis development and position C. glutamicum as a robust multi-substrate platform for heterogeneous renewable feedstocks.

Lysine-derived C5 compounds are important intermediates in cellular metabolism and promising building blocks for sustainable polymer chemistry. Among these, 5-aminovalerate (5-AVA) has been extensively studied as a platform chemical produced via a two-step microbial pathway. However, its direct precursor, 5-aminovaleramide (5-AVD), generated from lysine by lysine 2-monooxygenase, remains largely unexplored. Notably, 5-AVD is an attractive product in its own right, as it provides a versatile intermediate for the synthesis of polyamides and other nitrogen-containing chemicals. Here, we establish the first de novo microbial production of 5-AVD by systematically engineering Corynebacterium glutamicum for optimized precursor flux, product export, and redox balance. Trace secretion of 5-AVD was discovered in 5-AVA-producing strains, and tolerance studies showed that C. glutamicum can withstand high 5-AVD concentrations. To exploit this trait, the lysine-producing strain LYS-12 was engineered to express the davB gene from Pseudomonas putida under the constitutive tuf promoter, resulting in increased 5-AVD secretion. Pathway analysis revealed that the native exporter LysE is essential for efficient 5-AVD export, while heterologous GABA permeases provided no benefit. Mechanistic analysis further showed that LysE preferentially exports lysine over 5-AVD, establishing it as a flux gatekeeper that critically shapes product selectivity. Overexpression of heterologous NADP⁺-dependent glyceraldehyde-3-phosphate dehydrogenase (GapN) enhanced NADPH supply and improved redox balance, increasing the 5-AVD yield to 0.32 mol mol−1 in strain AVD-11. In fed-batch fermentation, AVD-11 reached a maximum productivity of 1.2 g L−1 h−1 and a final titer exceeding 36 g L−1 with > 97

Lignocellulosic biomass represents a promising renewable feedstock for sustainable biochemical production, with p-hydroxycinnamates emerging as key aromatic building blocks derived from agricultural residues and grassy plants. C. glutamicum has recently been engineered to produce cis, cis-muconate (MA), a high-value platform chemical used in biobased plastics, resins, and specialty chemicals. However, unlike other aromatics, the metabolism of the p-hydroxycinnamates p-coumarate, ferulate, and caffeate in MA-producing C. glutamicum is inefficient, limiting MA production performance. Here, we discovered that p-hydroxycinnamate metabolism, encoded by the phd operon, is repressed by the local repressor PhdR under glucose-rich conditions, while the global regulator GlxR activates the pathway in the absence of glucose. The deregulated C. glutamicum MA-10 lacking phdR exhibited an up to 98-fold increase in the conversion of p-coumarate, ferulate, and aromatic mixtures derived from plant waste into MA. Transcriptomic and metabolomic analyses revealed strong induction of the phd operon in strain MA-10 and a marked increase in intracellular aromatic CoA-esters and acetyl-CoA, indicating enhanced flux through the p-hydroxycinnamate degradation pathway. 13C-tracer studies demonstrated a substantial contribution of aromatic side-chain carbon to central metabolic pathways, supporting biomass formation and enabling MA production even in the absence of sugars. Additionally, MA-10 showed broadened substrate flexibility, degrading cinnamate into MA and methoxylated cinnamates into valuable benzoate derivatives. The strain also successfully converted aromatics from real straw lignin hydrolysates into MA. Our findings reveal the potential of targeted regulatory engineering to optimize C. glutamicum for lignin valorization. The newly developed strain MA-10 provides a robust platform for the biobased production of MA from lignocellulosic feedstocks, paving the way for sustainable and economically viable biorefinery processes.

The nonproteinogenic cyclic metabolite l-pipecolic acid is a chiral precursor for the synthesis of various commercial drugs and functions as a cell-protective extremolyte and mediator of defense in plants, enabling high-value applications in the pharmaceutical, medical, cosmetic, and agrochemical markets. To date, the production of the compound is unfavorably fossil-based. Here, we upgraded the strain Corynebacterium glutamicum for l-pipecolic acid production using systems metabolic engineering. Heterologous expression of the l-lysine 6-dehydrogenase pathway, apparently the best route to be used in the microbe, yielded a family of strains that enabled successful de novo synthesis from glucose but approached a limit of performance at a yield of 180 mmol mol-1. Detailed analysis of the producers at the transcriptome, proteome, and metabolome levels revealed that the requirements of the introduced route were largely incompatible with the cellular environment, which could not be overcome after several further rounds of metabolic engineering. Based on the gained knowledge, we based the strain design on l-lysine 6-aminotransferase instead, which enabled a substantially higher in vivo flux toward l-pipecolic acid. The tailormade producer C. glutamicum PIA-7 formed l-pipecolic acid up to a yield of 562 mmol mol-1, representing 75% of the theoretical maximum. Ultimately, the advanced mutant PIA-10B achieved a titer of 93 g L-1 in a fed-batch process on glucose, outperforming all previous efforts to synthesize this valuable molecule de novo and even approaching the level of biotransformation from l-lysine. Notably, the use of C. glutamicum allows the safe production of GRAS-designated l-pipecolic acid, providing extra benefit toward addressing the high-value pharmaceutical, medical, and cosmetic markets. In summary, our development sets a milestone toward the commercialization of biobased l-pipecolic acid.

Background Pediocin PA-1 is a bacteriocin of recognized value with applications in food bio-preservation and the medical sector for the prevention of infection. To date, industrial manufacturing of pediocin PA-1 is limited by high cost and low-performance. The recent establishment of the biotechnological workhorse Corynebacterium glutamicum as recombinant host for pediocin PA-1 synthesis displays a promising starting point towards more efficient production. Results Here, we optimized the fermentative production process. Following successful simplification of the production medium, we carefully investigated the impact of dissolved oxygen, pH value, and the presence of bivalent calcium ions on pediocin production. It turned out that the formation of the peptide was strongly supported by an acidic pH of 5.7 and microaerobic conditions at a dissolved oxygen level of 2.5%. Furthermore, elevated levels of CaCl 2 boosted production. The IPTG-inducible producer C . glutamicum CR099 pXMJ19 P tac pedACD Cg provided 66 mg L −1 of pediocin PA-1 in a two-phase batch process using the optimized set-up. In addition, the novel constitutive strain P tuf pedACD Cg allowed successful production without the need for IPTG. Conclusions The achieved pediocin titer surpasses previous efforts in various microbes up to almost seven-fold, providing a valuable step to further explore and develop this important bacteriocin. In addition to its high biosynthetic performance C. glutamicum proved to be highly robust under the demanding producing conditions, suggesting its further use as host for bacteriocin production.

Background Cyanobacteria receive huge interest as green catalysts. While exploiting energy from sunlight, they co-utilize sugar and CO 2 . This photomixotrophic mode enables fast growth and high cell densities, opening perspectives for sustainable biomanufacturing. The model cyanobacterium Synechocystis sp. PCC 6803 possesses a complex architecture of glycolytic routes for glucose breakdown that are intertwined with the CO 2 -fixing Calvin-Benson-Bassham (CBB) cycle. To date, the contribution of these pathways to photomixotrophic metabolism has remained unclear. Results Here, we developed a comprehensive approach for 13 C metabolic flux analysis of Synechocystis sp. PCC 6803 during steady state photomixotrophic growth. Under these conditions, the Entner-Doudoroff (ED) and phosphoketolase (PK) pathways were found inactive but the microbe used the phosphoglucoisomerase (PGI) (63.1%) and the oxidative pentose phosphate pathway (OPP) shunts (9.3%) to fuel the CBB cycle. Mutants that lacked the ED pathway, the PK pathway, or phosphofructokinases were not affected in growth under metabolic steady-state. An ED pathway-deficient mutant ( Δeda ) exhibited an enhanced CBB cycle flux and increased glycogen formation, while the OPP shunt was almost inactive (1.3%). Under fluctuating light, ∆eda showed a growth defect, different to wild type and the other deletion strains. Conclusions The developed approach, based on parallel 13 C tracer studies with GC–MS analysis of amino acids, sugars, and sugar derivatives, optionally adding NMR data from amino acids, is valuable to study fluxes in photomixotrophic microbes to detail. In photomixotrophic cells, PGI and OPP form glycolytic shunts that merge at switch points and result in synergistic fueling of the CBB cycle for maximized CO 2 fixation. However, redirected fluxes in an ED shunt-deficient mutant and the impossibility to delete this shunt in a GAPDH2 knockout mutant, indicate that either minor fluxes (below the resolution limit of 13 C flux analysis) might exist that could provide catalytic amounts of regulatory intermediates or alternatively, that EDA possesses additional so far unknown functions. These ideas require further experiments.

Extremolytes enable microbes to withstand even the most extreme conditions in nature. Due to their unique protective properties, the small organic molecules, more and more, become high-value active ingredients for the cosmetics and the pharmaceutical industries. While ectoine, the industrial extremolyte flagship, has been successfully commercialized before, an economically viable route to its highly interesting derivative 5-hydroxyectoine (hydroxyectoine) is not existing. Here, we demonstrate high-level hydroxyectoine production, using metabolically engineered strains of C. glutamicum that express a codon-optimized, heterologous ectD gene, encoding for ectoine hydroxylase, to convert supplemented ectoine in the presence of sucrose as growth substrate into the desired derivative. Fourteen out of sixteen codon-optimized ectD variants from phylogenetically diverse bacterial and archaeal donors enabled hydroxyectoine production, showing the strategy to work almost regardless of the origin of the gene. The genes from Pseudomonas stutzeri (PST) and Mycobacterium smegmatis (MSM) worked best and enabled hydroxyectoine production up to 97

Lignin displays a highly challenging renewable. To date, massive amounts of lignin, generated in lignocellulosic processing facilities, are for the most part merely burned due to lacking value-added alternatives. Aromatic lignin monomers of recognized relevance are in particular vanillin, and to a lesser extent vanillate, because they are accessible at high yield from softwood-lignin using industrially operated alkaline oxidative depolymerization. Here, we metabolically engineered C. glutamicum towards cis, cis-muconate (MA) production from these key aromatics. Starting from the previously created catechol-based producer C. glutamicum MA-2, systems metabolic engineering first discovered an unspecific aromatic aldehyde reductase that formed aromatic alcohols from vanillin, protocatechualdehyde, and p- hydroxybenzaldehyde, and was responsible for the conversion up to 57% of vanillin into vanillyl alcohol. The alcohol was not re-consumed by the microbe later, posing a strong drawback on the producer. The identification and subsequent elimination of the encoding fudC gene completely abolished vanillyl alcohol formation. Second, the initially weak flux through the native vanillin and vanillate metabolism was enhanced up to 2.9-fold by implementing synthetic pathway modules. Third, the most efficient protocatechuate decarboxylase AroY for conversion of the midstream pathway intermediate protocatechuate into catechol was identified out of several variants in native and codon optimized form and expressed together with the respective helper proteins. Fourth, the streamlined modules were all genomically combined which yielded the final strain MA-9. MA-9 produced bio-based MA from vanillin, vanillate, and seven structurally related aromatics at maximum selectivity. In addition, MA production from softwood-based vanillin, obtained through alkaline depolymerization, was demonstrated.

5-aminovalerate (AVA) is a platform chemical of substantial commercial value to derive nylon-5 and five-carbon derivatives like delta-valerolactam, 1,5-pentanediol, glutarate, and 5-hydroxyvalerate. De novo bio-production synthesis of AVA using metabolically engineered cell factories is regarded as exemplary route to provide this chemical in a sustainable way. So far, this route is limited by low titers, rates and yields and suffers from high levels of by-products. To overcome these limitations, we developed a novel family of AVA producing C. glutamicum cell factories. Stepwise optimization included (i) improved AVA biosynthesis by expression balancing of the heterologous davBA genes from P. putida, (ii) reduced formation of the by-product glutarate by disruption of the catabolic y-aminobutyrate pathway (iii), increased AVA export, and (iv) reduced AVA re-import via native and heterologous transporters to account for the accumulation of intracellular AVA up to 300 mM. Strain C. glutamicum AVA-5A, obtained after several optimization rounds, produced 48.3 g L-1 AVA in a fedbatch process and achieved a high yield of 0.21 g g-1. Surprisingly in later stages, the mutant suddenly accumulated glutarate to an extent equivalent to 30% of the amount of AVA formed, tenfold more than in the early process, displaying a severe drawback toward industrial production. Further exploration led to the discovery that ArgD, naturally aminating N-acetyl-L-ornithine during L-arginine biosynthesis, exhibits deaminating side activity on AVA towards glutarate formation. This promiscuity became relevant because of the high intracellular AVA level and the fact that ArgD became unoccupied with the gradually stronger switch-off of anabolism during production. Glutarate formation was favorably abolished in the advanced strains AVA-6A, AVA-6B, and AVA-7, all lacking argD. In a fed-batch process, C. glutamicum AVA-7 produced 46.5 g L-1 AVA at a yield of 0.34 g g-1 and a maximum productivity of 1.52 g L-1 h-1, outperforming all previously reported efforts and stetting a milestone toward industrial manufacturing of AVA. Notably, the novel cell factories are fully genome-based, offering high genetic stability and requiring no selection markers

Corynebacterium glutamicum is a major workhorse in industrial biotechnology for 60 years. As the world's flagship for amino acids, the microbe produces l-glutamate and l-lysine at a scale of seven million tons per year. In addition, it has been upgraded into a most versatile cell factory and meanwhile provides more than 80 different natural and non-natural compounds for chemical, energy, food and feed, cosmetic, pharmaceutical, and medical applications. In this chapter, we introduce this well-performing bacterium and highlight pioneering discoveries as well as milestones in technology and application. Moreover, we summarize recent advances to streamline C. glutamicum for novel types of products and valorization of newly arising sustainable feedstocks.

Bacteriocins are antimicrobial peptides produced by bacteria to inhibit competitors in their natural environments. Some of these peptides have emerged as commercial food preservatives and, due to the rapid increase in antibiotic resistant bacteria, are also discussed as interesting alternatives to antibiotics for therapeutic purposes. Currently, commercial bacteriocins are produced exclusively with natural producer organisms on complex substrates and are sold as semi-purified preparations or crude fermentates. To allow clinical application, efficacy of production and purity of the product need to be improved. This can be achieved by shifting production to recombinant microorganisms. Here, we identify Corynebacterium glutamicum as a suitable production host for the bacteriocin pediocin PA-1. C. glutamicum CR099 shows resistance to high concentrations of pediocin PA-1 and the bacteriocin was not inactivated when spiked into growing cultures of this bacterium. Recombinant C. glutamicum expressing a synthetic pedACDCgl operon releases a compound that has potent antimicrobial activity against Listeria monocytogenes and Listeria innocua and matches size and mass:charge ratio of commercial pediocin PA-1. Fermentations in shake flasks and bioreactors suggest that low levels of dissolved oxygen are favorable for production of pediocin. Under these conditions, however, reduced activity of the TCA cycle resulted in decreased availability of the important pediocin precursor l-asparagine suggesting options for further improvement. Overall, we demonstrate that C. glutamicum is a suitable host for recombinant production of bacteriocins of the pediocin family.

Lignin-based aromatics are attractive raw materials to derive medium-chain length poly(3-hydroxyalkanoates) (mcl-PHAs), biodegradable polymers of commercial value. So far, this conversion has exclusively used the ortho-cleavage route of Pseudomonas putida KT2440, which results in the secretion of toxic intermediates and limited performance. Pseudomonas putida H exhibits the ortho- and the meta-cleavage pathways where the latter appears promising because it stoichiometrically yields higher levels of acetyl-CoA. Here, we created a double-mutant H-Delta catA Delta A2 that utilizes the meta route exclusively and synthesized 30% more PHA on benzoate than the parental strain but suffered from catechol accumulation. The single deletion of the catA2 gene in the H strain provoked a slight attenuation on the enzymatic capacity of the ortho route (25%) and activation of the meta route by nearly 8-fold, producing twice as much mcl-PHAs compared to the wild type. Inline, the mutant H-Delta catA2 showed a 2-fold increase in the intracellular malonyl-CoA abundance - the main precursor for mcl-PHAs synthesis. As inferred from flux simulation and enzyme activity assays, the superior performance of H-Delta catA2 benefited from reduced flux through the TCA cycle and malic enzyme and diminished by-product formation. In a benzoate-based fed-batch, P. putida H-Delta catA2 achieved a PHA titre of 6.1 g l(-1) and a volumetric productivity of 1.8 g l(-1) day(-1). Using Kraft lignin hydrolysate as feedstock, the engineered strain formed 1.4 g l(- 1) PHA. The balancing of carbon flux between the parallel catechol-degrading routes emerges as an important strategy to prevent intermediate accumulation and elevate mcl-PHA production in P. putida H and, as shown here, sets the next level to derive this sustainable biopolymer from lignin hydrolysates and aromatics.

Seaweeds emerge as promising third-generation renewable for sustainable bioproduction. In the present work, we valorized brown seaweed to produce l-lysine, the world's leading feed amino acid, using Corynebacterium glutamicum, which was streamlined by systems metabolic engineering. The mutant C. glutamicum SEA-1 served as a starting point for development because it produced small amounts of l-lysine from mannitol, a major seaweed sugar, because of the deletion of its arabitol repressor AtlR and its engineered l-lysine pathway. Starting from SEA-1, we systematically optimized the microbe to redirect excess NADH, formed on the sugar alcohol, towards NADPH, required for l-lysine synthesis. The mannitol dehydrogenase variant MtlD D75A, inspired by 3D protein homology modelling, partly generated NADPH during the oxidation of mannitol to fructose, leading to a 70% increased l-lysine yield in strain SEA-2C. Several rounds of strain engineering further increased NADPH supply and l-lysine production. The best strain, SEA-7, overexpressed the membrane-bound transhydrogenase pntAB together with codon-optimized gapN, encoding NADPH-dependent glyceraldehyde 3-phosphate dehydrogenase, and mak, encoding fructokinase. In a fed-batch process, SEA-7 produced 76 g L-1l-lysine from mannitol at a yield of 0.26 mol mol-1 and a maximum productivity of 2.1 g L-1 h-1. Finally, SEA-7 was integrated into seaweed valorization cascades. Aqua-cultured Laminaria digitata, a major seaweed for commercial alginate, was extracted and hydrolyzed enzymatically, followed by recovery and clean-up of pure alginate gum. The residual sugar-based mixture was converted to l-lysine at a yield of 0.27 C-mol C-mol-1 using SEA-7. Second, stems of the wild-harvested seaweed Durvillaea antarctica, obtained as waste during commercial processing of the blades for human consumption, were extracted using acid treatment. Fermentation of the hydrolysate using SEA-7 provided l-lysine at a yield of 0.40 C-mol C-mol-1. Our findings enable improvement of the efficiency of seaweed biorefineries using tailor-made C. glutamicum strains.

The soil microbe Corynebacterium glutamicum is a leading workhorse in industrial biotechnology and has become famous for its power to synthetise amino acids and a range of bulk chemicals at high titre and yield. The product portfolio of the microbe is continuously expanding. Moreover, metabolically engineered strains of C. glutamicum produce more than 30 high value active ingredients, including signature molecules of raspberry, savoury, and orange flavours, sun blockers, anti-ageing sugars, and polymers for regenerative medicine. Herein, we highlight recent advances in engineering of the microbe into novel cell factories that overproduce these precious molecules from pioneering proofs-of-concept up to industrial productivity.

Polyunsaturated fatty acids (PUFAs), primarily docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA), have received worldwide attention in recent years due to an increasing awareness of their uniqueness in improving diet and human health and their apparently inevitable shortage in global availability. Microbial cell factories are a major solution to supplying these precious molecules in sufficient amounts and providing PUFA-rich aquafeed, superfoods, and medical formulations. This review assesses the PUFA world markets and highlights recent advances in upgrading and streamlining microalgae, yeasts, fungi, and bacteria for high-level PUFA production and broadening of the PUFA spectrum.

Background Thioesters of coenzyme A participate in 5% of all enzymatic reactions. In microbial cell factories, they function as building blocks for products of recognized commercial value, including natural products such as polyketides, polyunsaturated fatty acids, biofuels, and biopolymers. A core spectrum of approximately 5–10 short chain thioesters is present in many microbes, as inferred from their genomic repertoire. The relevance of these metabolites explains the high interest to trace and quantify them in microbial cells. Results Here, we describe a common workflow for extraction and absolute quantification of short chain CoA thioesters in different gram-positive and gram-negative bacteria and eukaryotic yeast, i.e. Corynebacterium glutamicum , Streptomyces albus , Pseudomonas putida , and Yarrowia lipolytica . The approach assessed intracellular CoA thioesters down to the picomolar level and exhibited high precision and reproducibility for all microbes, as shown by principal component analysis. Furthermore, it provided interesting insights into microbial CoA metabolism. A succinyl-CoA synthase defective mutant of C. glutamicum exhibited an unaffected level of succinyl-CoA that indicated a complete compensation by the l -lysine pathway to bypass the disrupted TCA cycle. Methylmalonyl-CoA, an important building block of high-value polyketides, was identified as dominant CoA thioester in the actinomycete S . albus . The microbe revealed a more than 10,000-fold difference in the abundance of intracellular CoA thioesters. A recombinant strain of S. albus , which produced different derivatives of the antituberculosis polyketide pamamycin, revealed a significant depletion of CoA thioesters of the ethylmalonyl CoA pathway, influencing product level and spectrum. Conclusions The high relevance of short chain CoA thioesters to synthetize industrial products and the interesting insights gained from the examples shown in this work, suggest analyzing these metabolites in microbial cell factories more routinely than done so far. Due to its broad application range, the developed approach appears useful to be applied this purpose. Hereby, the possibility to use one single protocol promises to facilitate automatized efforts, which rely on standardized workflows.

Extremolytes are small organic molecules, which protect cells under extreme, virtually inhabitable conditions. Their exceptional properties can be translated into health-promoting and therapeutic activities, which open an avenue of opportunities for the cosmetic, medical, and food industries. Supported by powerful approaches from systems and synthetic biology and systems metabolic engineering, the bio-industry becomes more and more attracted to exploit this 'goldmine'. In addition to the well-established flagship ectoine, several novel extremolytes have emerged in the past years and high-efficiency cell factories have been created for bio-based extremolyte production. Here, we review recent prominent examples and success stories in the field.

Sustainable production from seaweed has grown into an area of intense research and development. Meanwhile, more than 30 million tonnes of seaweed are produced, of which 70% are used as food and 30% have other applications such as feed, fertilizer, chemicals, and energy. Towards biorefining seaweed in an environmentally friendly and economically viable manner, we need efficient approaches that convert its biomass and residuals into added value products. Smart cell factories and fermentation strategies which can be integrated into future seaweed biorefineries are at the heart of the development and therefore receive increasing attention. Here, we review advances in the field including novel fermentation routes from seaweed to chemicals, materials, pharmaceuticals, fuels and energy, and discuss challenges and opportunities.

Background: Thioesters of coenzyme A participate in 5% of all enzymatic reactions and at least one third of all cellular carbon is typically metabolized through a CoA thioester. In microbial cell factories, they function as building blocks for products of recognized commercial value, including natural products such as polyketides, polyunsaturated fatty acids, biofuels, and biopolymers. A core spectrum of approximately 5 – 10 short chain thioesters is present in many microbes, as inferred from their genomic repertoire. The relevance these metabolites explains the high interest to trace and quantify them in microbial cells. Results: Here, we describe a common workflow for extraction and absolute quantification of short chain CoA thioesters in different gram-positive and gram-negative bacteria and eukaryotic yeast, i.e. Corynebacterium glutamicum , Streptomyces albus , Pseudomonas putida , and Yarrowia lipolytica . The approach detected CoA thioesters down to the level of 40 attomole and exhibited high precision and reproducibility for all microbes as shown by principal component analysis. Furthermore, it provided interesting insights into microbial CoA-spectra. A succinyl-CoA synthase defective mutant of C. glutamicum , exhibited an unaffected level of succinyl-CoA, which indicated a complete compensation of the l-lysine pathway to bypass the disrupted TCA cycle. Methylmalonyl-CoA, an important building block of high-value polyketides, was identified as dominant CoA thioester in the microbe. S. albus revealed a more than 10,000-fold difference in the abundance of intracellular CoA thioesters. A recombinant strain of S. albus , which produced different derivatives of the antituberculosis polyketide pamamycin, revealed a significant depletion of CoA thioesters of the ethylmalonyl CoA pathway, influencing product level and spectrum. Conclusions: The high relevance of short chain CoA thioesters to synthetize industrial products and the interesting insights gained from the examples shown in this work, suggest analyzing these metabolites in microbial cell factories more routinely than done so far. Due to its broad application range, the developed approach appears useful to be applied this purpose. Hereby, the possibility to use on single protocol promises to facilitate automatized efforts, which rely on standardized workflows.