Vitrification by using two-step exposures to combined cryoprotective agents (CPAs) has become one of the most common methods for oocyte cryopreservation. By quantitatively examining the status of oocytes during CPA additions and dilutions, we can analyze the degree of the associated osmotic damages. The osmotic responses of mouse MII oocyte in the presence of the combined CPAs (ethylene glycol, EG, and dimethyl sulfoxide, DMSO) were recorded and analyzed. A two-parameter model was used in the curve-fitting calculation to determine the values of hydraulic conductivity (Lp) and permeability (Ps) to the combined CPAs at 25°C and 37°C. The effects of exposure durations and the exposure temperatures on the cryopreservation in terms of frozen-thawed cell survival rates and subsequent development were examined in a series of cryopreservation experiments. Mouse MII oocytes were exposed to pretreatment solution (PTS) and vitrification solution (VS) at specific temperatures. The PTS used in our experiment was 10% EG and 10% DMSO dissolved in modified PBS (mPBS), and the VS was EDFS30 (15% EG, 15% DMSO, 3 × 10−3 M Ficoll, and 0.35 M sucrose in mPBS).The accumulative osmotic damage (AOD) and intracellular CPA concentrations were calculated under the different cryopreservation conditions, and for the first time, the quantitative interactions between survival rates, subsequent development rates, and values of AOD were investigated.

Having an effective means to cryopreserve human oocytes would offer more flexibility in healthcare services for infertility patients, and obviate cryopreservation of preimplantation embryos. It is essential to establish good animal models for human oocyte cryopreservation and the rabbit is a good candidate. Attempts to improve oocyte cryopreservation are often empirical, with results often being irreproducible. Cryopreservation protocols may be optimized by modeling the changes in oocyte volume and the associated damages incurred during the addition and dilution of cryoprotective agents (CPA). The objectives of the current study were to determine cryobiological properties of rabbit oocytes, including the isotonic volume, osmotically inactive cell fraction (V(b)), hydraulic conductivity (L(p)), permeability (P(s)) to dimethylsulfoxide (Me(2)SO), ethylene glycol (EG), and glycerol (GLY) and to examine the correlation between cell volume excursions and viability. This has led to the development of the accumulative osmotic damage (AOD) model associated with the processes of CPA addition/dilution. Mature rabbit oocytes were perfused with 15% (V/V) CPA medium (dissolved in 1x PBS). The osmotic responses of the oocytes were videotaped. A two-parameter model was fit to the experimental data to determine the values of L(p) and P(s). Oocyte volumes reached upon equilibration with 285, 600, 900, and 1200 mOsm (milliosmolal) solutions of non-permeating compounds were plotted in a Boyle van't Hoff plot. The average radius of rabbit oocytes in an isotonic solution was determined to be 55.7+/-1.2 microm (n=16). The rabbit oocyte exhibited an "ideal" osmotic response in the range from iso-osmolity to 1200 mOsm. The V(b) was determined to be 20% of the isotonic value with r(2)=0.97. The values of L(p) were determined to be 0.79+/-0.26, 0.82+/-0.22, and 0.64+/-0.16 microm min(-1)atm(-1) and the P(s) values were determined to be 2.9+/-1.3, 2.7+/-1.3, and 0.27+/-0.18x10(-3) cm min(-1) for Me(2)SO, EG and GLY, respectively. There were no significant differences (p>0.05) between values for L(p) and P(S) in the presence of the Me(2)SO and EG. However, these values were significantly different from the values in presence of GLY. We calculated the AOD values of those oocytes that experienced the process of CPA additions/dilutions and found that these values were highly correlated to the development rates of these oocytes after parthenogenetic activation (r=-0.98).

Stallion spermatozoa exhibit osmotic damage during the cryopreservation process. Recent studies have shown that the addition of cholesterol to spermatozoal membranes increases the cryosurvival of bull, ram and stallion spermatozoa, but the exact mechanism by which added cholesterol improves cryosurvival is not understood. The objectives of this study were to determine if adding cholesterol to stallion sperm membranes alters the osmotic tolerance limits and membrane permeability characteristics of the spermatozoa. In experiment one, stallion spermatozoa were treated with cholesterol-loaded cyclodextrin (CLC), subjected to anisotonic solutions and spermatozoal motility analyzed. The spermatozoa were then returned to isotonic conditions and the percentages of motile spermatozoa again determined. CLC treatment increased the osmotic tolerance limit of stallion spermatozoa in anisotonic solutions and when returned to isotonic conditions. The second and third experiments utilized an electronic particle counter to determine the plasma membrane characteristics of stallion spermatozoa. In experiment two, stallion spermatozoa were determined to behave as linear osmometers. In experiment three, spermatozoa were treated with CLC, incubated with different cryoprotectants (glycerol, ethylene glycol or dimethyl formamide) and their volume excursions measured during cryoprotectant removal at 5° and 22°C. Stallion spermatozoa were less permeable to the cryoprotectants at 5°C than 22°C. Glycerol was the least permeable cryoprotectant in control cells. The addition of CLC’s to spermatozoa increased the permeability of stallion spermatozoa to the cryoprotectants. Therefore, adding cholesterol to spermatozoal membranes reduces the amount of osmotic stress endured by stallion spermatozoa during cryopreservation.

BACKGROUNDOocyte cryopreservation remains a realistic objective, provided that more systematic approaches are applied, such as thorough analysis of the oocyte oolemma permeability to water and diverse cryoprotectants.METHODSWe prospectively investigated volume changes over time at different temperatures (30 degrees C, 22 degrees C and 8 degrees C) of human metaphase II (MII) oocytes (obtained in stimulated ICSI cycles and matured in vitro from the germinal vesicle stage) when exposed to changes in external osmolality. We also investigated human in vitro matured (IVM) oocytes membrane permeability characteristics at 22 degrees C to 1,2-propanediol (PG) and dimethylsulphoxide (DMSO) and at 30 degrees C, 22 degrees C and 8 degrees C to ethylene glycol (EG), and calculated corresponding oocyte oolemma permeability coefficients (Lp and Pcpa). Furthermore, we investigated the osmotic tolerance limits of IVM oocytes exposed to changes in external osmolality as assessed by their developmental competence during the course of 72 h after ICSI.RESULTSThe results of our studies describe human oocyte membrane permeability coefficients for EG at 30 degrees C (2.85+/-0.15x10(-3) cm/min), 22 degrees C (1.17+/-0.60x10(-3) cm/min) and 8 degrees C (0.37+/-0.15x10(-3) cm/min). Furthermore, at 22 degrees C the EG oolemma permeability coefficient was lower than that of PG and DMSO (1.17+/-0.60x10(-3) cm/min versus 2.15+/-0.70x10(-3) and 1.56+/-0.38x10(-3) cm/min, respectively). Our results also indicate, that human IVM MII oocytes tolerated exposure to solutions in the range of 39-2264 mOsmol/kg H2O as assessed by the oocytes' developmental competence after exposure.CONCLUSIONSThe results of the present study may contribute to a better understanding of the biology and cryobiology of human oocytes, and to the design of better and more robust cryopreservation (freezing or vitrification) protocols.

Osmotic properties of chimpanzee spermatozoa were studied at 22 degrees C. An electronic particle counter was used to determine the isosmotic cell volume, and the volume response after exposure to four commonly used cryoprotectants: dimethyl sulfoxide, glycerol, propylene glycol, and ethylene glycol. The data were analyzed to determine the hydraulic conductivity and the permeability coefficients for the four cryoprotectants. The osmotically inactive volume fraction was determined using a Boyle van't Hoff plot of cells exposed to sodium chloride solutions. A computer-assisted semen analysis system was used to determine the osmotic tolerance of chimp spermatozoa, as well as the effects of a one-step addition and removal of 1 M permeating cryoprotectant on sperm motility. The isosmotic volume of chimpanzee sperm is 27.7 microm3. The osmotically inactive cell fraction is 69%. Hydraulic conductivity was higher in the presence of ethylene glycol: 4.09 +/- 0.76 (mean +/- SEM) and propylene glycol: 3.91 +/- 0.71 as compared to dimethyl sulfoxide: 3.49 +/- 0.79 and glycerol: 2.83 +/- 0.40 microm/min per atmosphere. The permeability of chimpanzee sperm in ethylene glycol (2.18 +/- 0.40 x 10(-3) cm/min) and propylene glycol (1.75 +/- 0.17 x 10(-3) cm/min) was higher than in glycerol (1.42 +/- 0.12 x 10(-3) cm/min) and dimethyl sulfoxide (0.82 +/- 0.015 x 10(-3) cm/min). Although chimpanzee sperm tolerated osmotic stress in the range of 169-400 mOsm very well, loss of motility was observed as the solution concentrations diverged from isosmotic condition. Exposure to the four cryoprotectants at 1 M did not cause a significant reduction in sperm motility. This information on membrane permeability characteristics and cryoprotectant tolerance will aid in designing more reliable cryopreservation protocols for chimpanzee sperm.

Biophysical characteristics of the plasma membrane, such as osmotic sensitivity and water and cryoprotectant permeability are important determinants of the function of spermatozoa after cryopreservation. A series of experiments was conducted with rhesus macaque spermatozoa at 23 °C to determine their: (1) cell volume and osmotically inactive fraction of the cell volume; (2) permeability coefficients for water and the cryoprotectants dimethyl sulfoxide, glycerol, propylene glycol, and ethylene glycol; (3) tolerance to anisosmotic conditions; and (4) motility after a one step addition and removal of the four cryoprotectants. An electronic particle counter and computer aided semen analysis were used to determine the cell volume and permeability coefficients, and motility, respectively. Rhesus spermatozoa isosmotic cell volume was 27.7 ± 3.0 μm3 (mean ± SEM) with an osmotically inactive cell fraction of 51%. Hydraulic conductivity in the presence of dimethyl sulfoxide, glycerol, propylene glycol, and ethylene glycol was 1.09 ± 0.30, 0.912 ± 0.27, 1.53 ± 0.53, and 1.94 ± 0.47 μm/min/atm, respectively. Cryoprotectant permeability was 1.39 ± 0.31, 2.21 ± 0.32, 3.38 ± 0.63, and 6.07 ± 1.1 (×10−3 cm/min), respectively. Rhesus sperm tolerated all hyposmotic exposures. However, greater than 70% motility loss was observed after exposure to solutions of 600 mOsm and higher. A one step addition and removal of all four cryoprotectants did not cause significant motility loss. These data suggest that rhesus sperm are tolerant to hyposmotic conditions, and ethylene glycol may be the most appropriate cryoprotectant for rhesus sperm cryopreservation, as it has the highest permeability coefficient of the tested cryoprotectants.

Pancreatic islet cryopreservation is necessary to facilitate organizational aspects of transplantation, including islet banking, tissue matching, organ sharing, immunomanipulation of islets, and multiple-donor transplantation. It may not be ideal, however, to use a general protocol in which the same cryopreservation strategy is applied to islets isolated from different species. The present study presents a theoretical discussion, based on the use of experimentally measured, species-specific parameters, to propose optimized cryopreservation protocols specific for canine pancreatic islets. This study builds upon previously determined canine islet osmotic and permeability data by measuring hydraulic conductivity and ethylene glycol (EG) permeability at below ambient temperature, allowing calculation of activation energies for hydraulic conductivity and cryoprotectant solute permeability, which were found to be 9.6 and 17.3 kcal/mol, respectively. These data were then used, in conjunction with water/NaCl/EG phase diagram data and a mathematical model, to theoretically predict optimum initial EG concentration, cooling rate, and terminal temperature for controlled-rate cooling prior to plunging into liquid nitrogen. The results predicted 2.57 M initial EG concentration, 0.24°C/min cooling rate, and plunging at - 42°C would result in the highest survival. These data were used to develop a new cryopreservation method presented in a flow diagram that may be superior to the empirically based protocol. Verification of this optimized protocol will be established with ongoing future experiments.

The objective of this study was to develop an optimal cryopreservation method for human umbilical cord blood hematopoietic progenitor cells as evidenced by improved retention of in vivo engraftment ability and multilineage differentiation. An extended understanding of the osmometric/permeability characteristics of cord blood stem cells was accomplished by measuring permeability of the cryoprotectant dimethyl sulfoxide (DMSO) at below-ambient temperatures (10 degrees and 3 degrees C). These data were combined with previously published osmotic and permeability data and the water-NaCl-DMSO phase diagram in conjunction with a mathematical model to determine an optimal initial DMSO concentration, cooling rate, and liquid nitrogen plunging temperature. Cells cryopreserved with the theoretically optimized procedure were then compared with cells frozen using standard methods for the ability to engraft in irradiated NOD/SCID mice. The optimal procedure was determined to include a 0.7 molal (approximately 5%) DMSO concentration at a cooling rate of 4 degrees C/min, and a plunging temperature of -44 degrees C. The optimized protocol resulted in significantly higher engraftment of human CD45(+) cells (17.2 +/- 1.6% vs. 8.4 +/- 1.6%), CD19(+) B lymphocytes (11.3 +/- 1.2% vs. 5.8 +/- 1.2%), and CD34(+) cells (1.9 +/- 0.09% vs. 0.6 +/- 0.09%) compared to cells frozen using a standard method. Engraftment of CD33(+) cells was not significantly different (4.0 +/- 0.3 vs. 3.2 +/- 0.6, respectively). This study demonstrated that the use of a theoretically determined optimal cryopreservation method is superior to standard methods for maintaining UCB PCBs with multilineage repopulation potential in NOD/SCID mice.

Successful cryopreservation requires cells to tolerate volume excursions experienced during permeating cryoprotectant equilibration and during cooling and warming. However, prior studies have demonstrated that mouse spermatozoa are extremely sensitive to osmotically induced volume changes. A series of three experiments were conducted 1) to test the efficacy of two commonly used extender media components, egg yolk (EY) and skim milk (SM), in broadening the osmotic tolerance limits (OTL) of ICR and B6C3F1 murine spermatozoa; 2) to determine if the extender components affected sperm plasma membrane permeability coefficients for water and cryoprotective agent (CPA) characteristics; and 3) to test the effects of permeating and non-permeating CPA on mouse sperm morphology. In experiment 1, sperm samples were added to 150, 225, 300, 450, or 600 mOsm NaCl, EY, SM, sucrose, or choline chloride at 22degreesC and then returned to isosmotic conditions. In experiment 2, epididymal sperm were preequilibrated in 1 M glycerol (Gly) or 2 M ethylene glycol (EG) prepared in SM extender, abruptly exposed to isosmotic conditions at 22, 15, or 2degreesC, and the corresponding volume.excursions were measured and analyzed. In experiment 3, the effects of permeating CPA (0.3 M EG or dimethyl sulfoxide) or nonpermeating CPA (12% sucrose or 18% raffinose) on sperm morphology (i.e., principle midpiece folding and putative membrane fusion) were evaluated. Experiment 1 showed that spermatozoa from ICR and B6C3F1 mice have effectively broader OTL when exposed to EY or SM extenders. The results of experiment 2 indicated that, for ICR sperm, the activation energy (E.) for the hydraulic conductivity (LP) was unchanged in SM extender. However, for B6C3F1 sperm, there were significant differences in E of LP in the presence of Gly and EG. The result of experiment 3 indicated that permeating CPAs damage sperm membrane integrity, causing a high frequency of head-to-tail or tail-to-tail membrane fusion, whereas this occurrence in the presence of nonpermeating CPA was less than 3%. Finally, the results of experiments 1 and 2 were combined in a mathematical model to predict Gly and EG addition and removal in the presence of SM extender, which would prevent mouse sperm membrane damage. These predictions indicated that, for ICR sperm, both Gly and EG may be added and removed in a single step. However, for B6C3F1 spermatozoa, Gly required a two-step addition while EG only required a single step. For removal from B6C3F1 sperm, Gly required a three-step removal process while EG required a two-step removal.

The transplantation of placental/cord blood-derived HPC (e.g., CD34+ cells) has become a useful treatment for a broad spectrum of malignant and nonmalignant diseases. The ability to cryopreserve this cell type with high efficiency adds considerable flexibility to cord blood transplantation. The purpose of this study was to develop an understanding of the fundamental cryobiologic factors of these cells, including the osmotic/permeability characteristics, and to use a theoretical approach to optimize freezing procedures. To that end, biophysical parameters, including the osmotically inactive cell volume (Vb), hydraulic conductivity (Lp), and cryoprotectant permeability coefficient (P(CPA)) for DMSO and propylene glycol were measured using a modified Coulter Counter (Coulter Electronics, Inc., Hialeah, FL) at 22 degrees C. In addition, the osmotic tolerance of PCB CD34+ cells was assessed using a colony-forming assay. These experimentally determined parameters were used in a mathematical model to predict optimal cryoprotectant addition and removal procedures. The results demonstrate a Vb of 0.32 x V(iso), an average Lp of 0.17 +/- 0.03 (microm/min/atm +/- SD), and a PCPA of 0.94 +/- 0.004 or 1.0 +/- 0.004 cm/min (x10(-3)) for DMSO or propylene glycol, respectively. No significant difference was determined between the two cryoprotectants used. The osmotic tolerance limits were determined to be 200 and 600 mOsm/kg (1.29 and 0.62 x V(iso), respectively). These results indicate potential benefits of modifications to the widely used method of Rubinstein et al. Proc Natl Acad Sci USA 92:10119-10122, 1995) for cord blood CD34+ cell cryopreservation. As opposed to Rubinstein's method in which DMSO is added to cooled cell suspensions over a 15-min interval, our data indicate that better results may be obtained by introducing and removing the cryoprotectant at ambient temperature over 5 min both to increase viability by avoiding unnecessary risks from osmotic shock and to simplify the protocol. In addition, substitution of propylene glycol for DMSO may be of benefit during the actual freezing and thawing process.

The osmotic tolerance limits for boar spermatozoa were determined at 22 degrees C. These cells can swell to within 1.02 times and shrink to within 0.97 times their isosmotic volume and maintain > 70% motility. In the presence of an extender, cells can swell to within 1.1 times and shrink to within 0.97 times their isosmotic volume and maintain > 70% motility. Plasma membrane permeability coefficients were determined in the presence of 1 M dimethyl sulfoxide (DMSO), 1 M glycerol, and 2 M ethylene glycol (EG) at 22 degrees C. Hydraulic conductivity (Lp) was estimated to be 0.120+/-0.016 (mean+/-SEM), 0.138+/-0.006, and 0.204 +/-0.021 microm/min/atm in the presence of DMSO, glycerol, and EG, respectively, at 22 degrees C. Solute permeability (P[CPA]) was determined to be 0.930+/-0.118, 0.481+/-0.045, and 1.98+/-0.106 x 10(-3) cm/min, for DMSO, glycerol, and EG, respectively. Subsequent experiments were performed at 8 degrees C and 0 degrees C. Activation energies were calculated for Lp in the presence of glycerol and EG to be 7.20 and 11.51 Kcal/mol, respectively. The activation energies for P(CPA) were 4.06 and 7.48 Kcal/mol for glycerol and EG permeability, respectively. These membrane characteristics were used to calculate volume flux during addition and removal of cryoprotectant agents as well as during cooling and warming. In addition, the potential for intracellular ice formation during cooling and warming was calculated.

Cryopreservation protocols for pancreatic islets may be optimized by modeling the changes in volume that occur during cryoprotectant addition/dilution and cooling/warming. Modeling may be facilitated if it can be demonstrated that isolated islets behave as ideal osmometers where the equilibrium volume is a linear function of the reciprocal of the osmolality of the extracellular medium (the Boyle van't Hoff relationship). The present study was performed to test the hypotheses that: (i) human and canine islets exhibit a linear osmotic response during exposure to hypo-, iso-, and hyperosmotic solutions and to determine the human and canine islets osmotically inactive fraction (Vbp); (ii) to determine if the ionic properties of a concentrated electrolyte solution have an effect on the osmotic response; and (iii) to determine if the osmotic response of pancreatic islets varies between species (human and canine). Islets were isolated from four human and four canine pancreases using standard collagenase digestion and EuroFicoll purification. After 12 h incubation at 37 degrees C, islets (n = 4 from each isolation) were exposed to varying salt or sucrose concentrations (75-1200 mOsm/kg). Islets were held by a micropipette system attached to an inverted microscope, and solutions were exchanged while videotaping. An imaging system was used to determine the cross-sectional area of the islet which was then used to estimate the spherical volume. The results of linear regression analysis indicated that both human and canine islets respond ideally to osmotic conditions within a range of 150-1200 mOsm/kg in both the electrolyte (salt) and the nonelectrolyte (sucrose) solutions. The Vbp value (mean +/- SD) of the four donors was 0.513 +/- 0.068 for canine islets in sucrose solutions, 0.474 +/- 0.068 for canine islets in salt solutions, 0. 425 +/- 0.073 for human islets in sucrose solutions, and 0.39 +/- 0. 073 for human islets in salt solutions. There was a significant difference between human and canine islets (P < 0.05) but not between experimental solutes (NaCl or sucrose) (P < 0.05). These data may be used in conjunction with osmotic tolerance data to develop improved methods for the cryopreservation of isolated islets.

The development of more effective means to separate pancreatic islets from the unwanted exocrine tissue would greatly advance the field of clinical islet allotransplantation in the treatment of insulin-dependent diabetes mellitus. Recent experiments with hamster islets have demonstrated a selective destruction of dissociated single exocrine cells when exposed to hypotonic conditions. It was the aim of this study to extend these observations to the canine model with collagenase dissociated pancreatic tissue and to evaluate the treatment's effect on islet function. Pancreases from five mongrel dogs were digested using an automated protocol of intraductal delivery of collagenase, and gentle dissociation. Duplicate samples of pancreatic digest were removed for insulin and amylase determination prior to and immediately following exposure to 50 mOsm/kg salt solution for a period of 30, 60, or 300 s before returning the digest to isoosmotic conditions. The remaining digest was cultured for a period of 48 h at 37°C before the tissue was recombined, washed, and a third sample removed for insulin and amylase. In vitro viability was then assessed using a static incubation assay with insulin content measured using a double-antibody radioimmunoassay, and amylase was determined using a colorimetric assay system. No difference in the insulin or amylase levels between the experimental groups was observed immediately following the hypotonic exposure; however, a significant decrease in the amylase content was observed following the 48-h culture period in digest that had been hypoosmotically exposed for 60 or 300 s compared with the pretreatment group (2.83 ± 0.41 IU amylase/mg pancreas vs. 1.29 ± 0.21 and 0.83 ± 0.12, mean ± SEM, p < 0.05). Insulin content was also significantly reduced in the 300-s exposure group compared with nontreated controls (3.2 ± 0.6 mU insulin/mg pancreas vs. 2.0 ± 0.2). The insulin/amylase ratio (I/A), a measure of islet and exocrine content, was 1.1 ± 0.13 following pancreas dissociation and 1.34 ± 0.21 for control tissue cultured for 48 h. The I/A ratio increased following hypoosmotic exposure to 1.50 ± 0.31 for tissue exposed for 30 s, 1.77 ± 0.19 for 60-s exposure, and 2.54 ± 0.13 for tissue exposed for 300 s (p < 0.05, vs. pretreatment group). In vitro insulin secretion was equivalent with the exception of the tissue exposed for 300 s, which had an increased basal level of insulin resulting in a significantly decreased stimulation index (3.8 ± 0.5 vs. 8.1 ± 1.2 for the purified islet control group, p < 0.05). These results suggest that a brief hypotonic exposure to pancreatic digest can alter the insulin/amylase ratio; however, there is a functional impairment on subsequent islet function after a period of in vitro tissue culture.

Determination of cell hydraulic conductivity (Lp) is required to predict optimal conditions for cell cryopreservation. One of the critical procedures associated with the determination of Lp is to measure the kinetics of cell volume change in response to a sudden cell exposure to anisosmotic media until the cell achieves osmotically equilibrium state. Unfortunately, this measurement and the accuracy of the measured data are usually affected by at least three factors: (a) time (t′) required for mixing the cells with the anisosmotic media, (b) response time (t″) of the measurement device, and (c) resolution (δ) of the measurement device. To ensure the accuracy of the Lp determination, it is required that (1) the cell osmotic equilibration process should be sufficiently slow (The time needed for cells to achieve osmotic equilibrium should be much longer than the t′ and t″), and (2) the total cell volume change (ΔV) should be much larger than δ. A cell’s half volume excursion time (t*) was defined as a time in which osmotically active cell water volume increases or decreases by half of its maximum change, i.e. V(t*) = (Vf - Vo)/2+Vo where V(t*) = cell water volume at t*, Vo = initial cell water volume, and Vf = final cell water volume at osmotic equilibrium state. To satisfy the above requirements, it is necessary to design an experimental condition which guarantees that (1) t* ≫ t′ and t″, and (2) the total cell volume change |ΔV| (= |Vf - Vo|) ≫ δ. Based on water transport equations (Kedem and Katchalsky, 1958), a series of analytical solutions were derived. The t* and ΔV were expressed as functions of two control variables: initial intracellular osmolality (Mo) and extracellular osmolality (Me). Based on these solutions, the following was predicted: To most effectively increase both t* and ΔV, a relative hyposmotic Me (< Mo, instead of relative hyperosmotic) should be used in the experiment. Under this condition, (1) for a fixed Mo, both t* and ΔV would be increased with a decrease of Me; and (2) for a chosen Me(< Mo), an increase (or a decrease) of Mo would result in a decrease (or an increase) of t* but an increase (or a decrease) of ΔV. These predictions were confirmed by performing experiments using two different cell types. In the light of this study, a strategy to optimize experimental design for the Lp determination is suggested.