Fifteen-frames interferometric diagnostics at the PF-1000 facility was enhanced by adding four frames of the schlieren diagnostics and by splitting of four channels in the optical delay line. This setup enabled the visualization of gradients in the plasma density perpendicular to the direction of the diagnostic laser beam, and their relationship with larger structures visualized by using laser interferometry. The schlieren pictures showed filamentary structures of submillimeter 200–300 μm diameter in shots performed with pure deuterium filling. Filaments were observed in a thin (millimeter-thick) lateral-boundary layer, in lobules, and in internal fast transforming regions of the dense plasma column. Their high-density gradients and location in the regions of recorded (or inferred) currents indicated local concentrations of the magnetic field and current distribution. Millimeter- and submillimeter-size sources of fast charged particles, which were identified in the recorded ion pinhole pictures, have been conjectured to be a manifestation of high local concentrations of the magnetic energy.

This paper concerns the correlation of hard x-ray and neutron signals, which were recorded with scintillation detectors oriented in the axial and radial directions, in a comparison with interferometric and extreme-ultraviolet radiation frames, as recorded within the plasma focus (PF)-1000 facility operated with a deuterium filling. The considered signals showed two different phases. In the initial phase, the fusion neutrons are mainly produced by deuterons moving dominantly downstream during the disruption of a pinch constriction (lasting tens nanoseconds). In the later phase (usually after about 100 ns), the fusion neutron emission reaches its maximum in the radial directions. This emission (lasting 100–200 ns) is caused by the fast deuterons moving in both the downstream and radial directions. It correlates usually with a decay of dense plasma structures in remnants of the expanding pinch column. This can be explained by a decay of internal magnetic fields. The neutron signal is usually composed of several sub-pulses of different energies. It was deduced that the primary deuterons producing the observed fusion neutrons undergo a regular and repeated temporal, directional, and energy evolution.

This paper provides the results of studies of plasma flows generated in the plasma focus facility PF-1000U. Regimes are found, involving the formation of compact plasma objects propagating in the variable-density background environment to the distances exceeding the initial crosswise dimensions of these objects by dozens of times. It is shown that the flow spreads with its proper captured toroidal magnetic field. The plasma flow front structure is studied. The conclusions about the role of radiation cooling and magnetic confinement in the collimation and stability of outflows are drawn. The results obtained in this work can be used to analyze the existing and build new models describing the collimation and stability of non-relativistic outflows of young stellar objects. Copyright (C) EPLA, 2020

This paper describes the structure of a higher extreme ultraviolet (XUV) emission and plasma density region which surrounds a pinched dense-plasma column. It is interpreted as a toroidal-like plasma formation, which is flowing by a closed current with poloidal and toroidal components upon its surface. This current produces a local magnetic field, which separates the external discharge current from the surface of the dense pinch column. We estimated the values of closed currents as well as magnetic- and plasma-pressures in this column and its surrounding on the basis of the measured distribution of interferometric fringes and intense XUV emission, recorded during the pinch stagnation phase. The considered layer forms the region in which the magnetic energy can be conserved, and during its decay, the acceleration of fast deuterons can take place.

The paper discusses a possible energy transformation that leads to the acceleration of fast ions and electrons. In plasma-focus discharges that occur during deuterium filling, which have a maximum current of about 1 MA, the accelerated deuterons produce fast fusion neutrons and fast electrons hard X-ray emissions. Their total energy, which is of the order of several kilojoules, can be delivered by the discharge through a magnetic dynamo and self-organization to the ordered plasma structures that are formed in a pinch during the several hundreds of nanoseconds of the pinch implosion, stagnation, and evolution of instabilities. This energy is finally released during the decay of the ordered plasma structures in the volume between the anode face and the umbrella front of the plasma and current sheath in the form of induced electric fields that accelerate fast electrons and ions.

This paper presents the results of studies of plasma flow parameters on the PF-1000U facility. A distinctive feature of this facility is the ability to create profiled initial gas distributions using gas puffs. In the experiments described, a combined system for filling the vacuum chamber with a working gas was used, in which an additional injection of various gases (deuterium, helium, neon and their mixtures) into the axial region of the chamber prefilled with deuterium was performed using a pulse valve. Thus, both the pinching processes and, accordingly, the generation of axial plasma flows and the conditions of their propagation in the background gas of the facility chamber were affected. Regimes with the generation of compact stable plasma formations propagating over long distances were found. The results obtained can be used in laboratory modelling of astrophysical jets from young stellar objects.

A methodology is elaborated and applied to taxonomy of large chambers of thermonuclear fusion reactors. It ensures a feasibility to describe impairments produced by environment and details of the chamber into the neutron field generated during the operation of a reactor. The method is based on application of very bright nanosecond neutron flashes irradiated from a compact neutron source of a dense plasma focus type. A number of neutron activation procedures as well as a neutron time-of-flight method were applied to trace deviations of neutron 3-D fields after their interaction with the simulator of the above chamber. Monte-Carlo modeling of these processes gained the data on the most important elements that influenced on the fields.

Plasma in a pinch column, as produced by a plasma-focus discharge at the deuterium filling and the current intensity reaching 1 MA, was investigated at the total neutron yield reaching about 1010 per discharge. The use was made of neutron diagnostics, laser interferometry, soft X-ray measurements, optical emission spectroscopy, magnetic probes, as well as electron and ion measurements with the temporal, spatial, and energetic resolutions. The detailed studies showed the ordered toroidal, helical, and plasmoidal structures which could contain currents with poloidal and toroidal components and their associated magnetic fields. Their spontaneous transformations were explained by changes in a topology of magnetic field lines due to magnetic reconnections. A nonthermal acceleration of fast electrons and ions (producing hard X-rays and fusion neutrons, respectively) corresponded to: 1) the formation of plasmoids in the pinch column and 2) a decay of pinch constrictions and secondary plasmoids during the evolution of instabilities. A filamentary structure of the current flow could explain the high energy density and fast transformations of the magnetic energy into kinetic energy of electron and ion beams (reaching energy of hundreds of kiloelectronvolt). This paper summarizes the results obtained with the PF-1000 facility in 2009-2017, and describes the internal transformations in a dense plasma column during the evolution of MHD instabilities.

The paper summarizes important results of the recent experimental studies performed on the plasma-focus PF-1000 facility operated in Warsaw, Poland, mainly with the pure deuterium filling. Attention is focused on the evolution of toroidal and plasmoidal self-organized structures formed by internal closed currents inside the dense plasma column. The production of hard x-rays and neutrons corresponds with the formation and decay of plasmoids, in which charged particles can be accelerated effectively to high energies, during a release of the magnetic energy from current filaments of high energy density. It is noticed that the studies of laboratory fusion and cosmic plasmas deal with similar problems, e.g., the fast release of the magnetic energy in a form of high-energy charged particle beams.

This paper concerns the evolution of internal structures and the neutron production in plasma-focus discharges performed in the presence of a permanent magnet (placed inside the anode front) and within a residual magnetic field (after the removal of this magnet). The initial magnetic field generated by this magnet prevented: (i) the effective compression of a dense pinch column, (ii) the formation of plasma organized structures, and (iii) the evolution of plasma instabilities. The experimental results have shown an increase in the initial magnetic field due to a magnetic dynamo effect in the presence of the permanent magnet, as well as in a series of shots performed after its removal. It was observed that the appearance of plasmoidal structures is necessary for the emission of fusion neutrons. A characteristic quasicylindrical plasma layer of the radius corresponding to the plasma lobule tops, which might be identified with a ring region of the acceleration of fast deuterons, was also observed.

This paper presents the discussion concerning the characteristics of the fast deuterons which have energy above 30 keV and are recorded during high-current plasma-focus (PF) discharges, by means of PM-355 plastic track-detectors placed inside ion pinhole cameras. The fast deuterons evoke D-D fusion reactions, mainly by a beam-target mechanism. The distribution of the magnetic field, which influences the trajectories of the recorded deuterons, is discussed. It is found that the fast deuterons are produced in various local sources and their motion is strongly influenced by a circular symmetry of the local magnetic field, which increases their radial shift with a decrease in their energy. The sources of these deuterons are probably located inside the plasmoids and in some local regions of the ring-shaped plasma structures. These ring-structures can be formed outside the dense pinch column, up to a radius of 5 cm. Global magnetic fields, associated with the total current flow in the PF discharge, have a weaker influence. The observed radial shift of the recorded fast deuterons is interpreted as a result of their deflection by magnetic fields which have opposite orientations of the azimuthal components, associated with the currents flowing in directions towards and from the applied ion detectors. The local sources of the recorded fast deuterons correspond to filamentary structures, in which the stored magnetic energy (having the local high density) can be released in induced electric fields accelerating the deuterons during the magnetic reconnections.

The paper describes the behaviour of plasma within a MA plasma-focus with a novel electrode configuration, in which the anode and anti-anode were both equipped with conical tips. This configuration was applied to test the possibility of reducing the pinch axial dimensions during the radial compression of a current sheath. It made it possible to strengthen a dense plasma jet near the anode end, which ejected plasma into a bigger plasmoidal structure formed in the central pinch region. It did not allow forming an opposite anti-anode jet and stopped the axial motion of this structure. In plasma focus discharges with the deuterium filling, the decay of the anode jet and the corresponding plasmoid evolution were accompanied by the fusion-neutron production. Some results obtained with this configuration have also supported the hypothesis of the acceleration of fast electrons and ions at a release of the magnetic energy during magnetic reconnections in the organized dense plasma structures.

Fusion plasmas produced in tokamaks, inertial-fusion experiments with powerful lasers, and z-pinch discharges, deal with similar questions concerning the generation of high energy beams of charge particles, similar to those emitted from plasmas in Universe1-3. In all cases, a fast release of magnetic energy during magnetic reconnections of various organized structures is often considered. Dense plasmas, which are produced in plasma-focus discharges, have some advantages in solving this problem, since they have very convenient parameters for complementary diagnostics with relative simple temporal-, spatial- and spectral-resolution. The described experimental research on DD fusion reactions was performed at the current intensity of about 1 MA and the total neutron yield of about 1010 per shot. A multi-frame interferometry system, scintillation detectors, as well as X -ray and corpuscular diagnostic equipment - made it possible to study the evolution of toroidal- and plasmoidal-structures, which were formed by closed currents with poloidal and toroidal components in filamentary forms. The production of hard X -rays and fusion neutrons correlated with the formation and decay of plasmoids4. The gained knowledge about evolution of the ordered structures, transformations of currents and magnetic fields - can be an inspiration for researchers of the tokamak- and laser-fusion as well as for astrophysicists community.

This paper considers regions of a fast deuteron production in a correlation with an evolution of ordered structures inside a pinch column of a mega-ampere plasma focus discharge. Ion pinhole cameras equipped with plastic PM-355 track-detectors recorded fast deuterons escaping in the downstream and other directions (up to 60° to the z-axis). Time-integrated ion images made it possible to estimate sources of the deuteron acceleration at the known magnetic field and deuteron energy values. The images of the fast deuterons emitted in the solid angle ranging from 0° to 4° showed two forms: central spots and circular images. The spots of 1–2 cm in diameter were produced by deuterons from the central pinch regions. The circular-shaped images of a radius above 3 cm (or their parts) were formed by deuterons from the region surrounding the dense pinch column. The ion pinhole cameras placed at angles above 20° to the z-axis recorded the ion spots only, and the ring-images were missing. The central region of the deuteron acceleration could be associated mainly with plasmoids, and the circular images could be connected with ring-shaped regions of the radius corresponding to tops of the plasma lobules outside the dense pinch column. The deuteron tracks forming ring-shaped images of a smaller (0.5–1) cm radius could be produced by deflections of the fast deuterons, which were caused by a magnetic field inside the dense pinch column.

The paper reports on soft x-ray emission from high-current discharges in PF-1000U facility operated at 170 kJ. The discharges at static conditions were performed with pure deuterium (D2) and a mixture of D2 and neon (Ne). In shots with the gas-puffing 1 cm3 of D2 or a (D2+Ne) mixture was injected 2 ms before the discharge initiation. Time-integrated x-ray images from a Be-filtered pinhole camera showed that the pinch microstructure depends strongly on gas conditions. In shots with the D2-, (D2+Ne)- or He-puffing distinct “filaments” and “hot-spots” were observed. Time-resolved x-ray pulses were recorded with 4 filtered PIN-diodes which recorded signals from 2 regions of 3 cm in diameter (at z = 3 cm and 6 cm from the anode). From a ratio of x-ray pulses, measured behind different filters, it was estimated that at the static D2-filling electron temperatures (Te ) were from 90 eV to 200 eV. At the D2-filling and -puffing additional x-ray spikes were emitted from “hot-spots” with Te twice higher. In shots at the (D2+10%Ne)-filling Te was 4 keV. In shots with the (D2+Ne)-mixture puffing intense “hot-spots” were formed, and Te reached 2.2-7.5 keV. At the same conditions “filaments” were reproducible macroscopically, but “hot-spots” were irreproducible.

The paper describes the filamentary structure observed in the high-energy ultraviolet radiation for discharges performed at the hydrogen- or deuterium-filling and at the puffing of hydrogen, deuterium or helium, in a mega-ampere dense plasma-focus facility. The lifetime of this structure overcomes 50 ns. These filaments connect the surface of a pinched column with internal plasmoids formed at different combinations of filling and puffing gases and they should transport some current and plasma. During all the investigated deuterium shots, the fusion-produced neutrons were recorded. Therefore, deuterons should be present in the region of their acceleration, independent of the applied puffing of the gas. Simultaneously with the observed filaments, inside the dense plasma column small plasma-balls of mm-dimensions were observed, which had a similar lifetime (longer than the relaxation time) and quasi-stationary positions in the discharge volume. The observed filaments and balls might be a manifestation of the (i) discrete spatial structure of the current flowing through and around the dense plasma column and (ii) transport of the plasma from external layers to the central region. Their formation and visualization were easier due to the application of air admixtures in the puffed gas.

The paper is aimed at optimization of parameters of a copper plasma jet produced at the DPF-1000U device, in which the inner electrode face was conically shaped. Preliminary information was obtained by numerical simulations of the plasma jet creation for different copper cones with the use of the two-dimensional magneto-hydrodynamic code KAROL. The simulations suggested that the cone height in the range of 4-7 cm should ensure a good plasma jet quality. The experimental data delivered by means of a 16-frame laser interferometer and a four-frame X-ray pinhole camera fully confirmed this conclusion. In the paper, we demonstrate the results for a 5 cm height cone. The eroded Cu plasma, swept up by the deuterium plasma sheath, was accelerated axially and compressed to very small diameter (3 mm) with an electron density of 7 x 10(18) cm(-3). The Cu plasma jet achieved a velocity of 5 x 10(7) cm/s and reached in the period of about 230 ns a distance (length) of 7 cm. The above results prove a successful adaptation of the plasma focus device to the metallic plasma jet generator.

The paper concerns important differences in the evolution of plasma column structures during the production of fusion neutrons in the first and subsequent neutron pulses, as observed for plasma-focus discharges performed with the deuterium filling. The first neutron pulse, of a more isotropic distribution, is usually produced during the formation of the first big plasmoid. The next neutron pulses can be generated by the fast deuterons moving dominantly in the downstream direction, at the instants of a disruption of the pinch constriction, when other plasmoids are formed during the constriction evolution. In both cases, the fusion neutrons are produced by a beam-target mechanism, and the acceleration of fast electron- and deuteron-beams can be interpreted by transformation and decay of the magnetic field associated with a filamentary structure of the current flow in the plasmoid.

The paper describes the evolution of self-organized structures inside a pinched plasma column during the phase of the effective production of fusion neutrons, as observed in the mega-ampere plasma focus experiment performed with a conical tip placed in the centre of the anode face. In a comparison with the plane anode face configuration, the described anode shape facilitated transformations in the pinch column during the neutron production and increased the neutron yield several times. Simultaneously, it decreased the minimal diameter and the length of the pinched column, and it depressed the first neutron pulse. It also induced shorter pulses of X-rays and neutrons, which enabled the determination of a temporal difference between the emission of electron and deuteron beams. The fast electrons were produced mainly during a disruption of the pinch constriction, while the fast deuterons – during the formation and explosion of plasmoids. The paper also presents the temporal evolution of a current distribution in the plasmoid during the neutron production, as well as the appearance and stable positions of current filaments traces upon the surface of the conical anode tip.

In this paper, we describe the influence of an Al wire of 270 μm in diameter placed along the anode axis on the transformation of the deuterium pinch column in a megaampere (MA) plasma focus device. The evolution of the pinched column and of the wire corona was investigated by means of the multiframe interferometry, neutron and X-ray diagnostics. The wire corona did not influence considerably on the evolution of dense plasma structures and neutron production, but it increased the plasma density and consequently, the currents around its surface. The distribution of the closed internal currents (ranging hundreds of kA) and associated magnetic fields amounting to 5 T were also estimated in the dense plasma column and in plasmoidal structures at the near-equilibrium state. The description is based on the balance of the plasma pressure and the pressure of the internal poloidal and toroidal current components compressed by the external pinched column. The dominant number of fusion deuterium-deuterium (D-D) neutrons is produced during the evolution of instabilities, when the uninterrupted wire corona (containing deuterium) connects the dense structures of the pinch, and it did not allow the formation of a constriction of the sub-millimeter diameter.