The benzylidyne complex [PhC≡W{OSi(OtBu)3 }3 ] (1) catalyzed the cross-metathesis between 1,4-bis(trimethylsilyl)-1,3-butadiyne (2) and symmetrical 1,3-diynes (3) efficiently, which gave access to TMS-capped 1,3-diynes RC≡C-C≡CSiMe3 (4). Diyne cross-metathesis (DYCM) studies with 13 C-labeled diyne PhC≡13 C-13 C≡CPh (3*) revealed that this reaction proceeds through reversible carbon-carbon triple-bond cleavage and formation according to the conventional mechanism of alkyne metathesis. The reaction between 1 and 3* afforded the 3-phenylpropynylidyne complex PhC≡13 C-13 C≡W{OSi(OtBu)3 }3 ] (5*), indicating that alkynylalkylidyne complexes are likely to act as catalytically active species. Attempts to isolate 5* from mixtures of 1 and 3* afforded crystals of the ditungsten 2-butyne-1,4-diylidyne complex [(tBuO)3 SiO}3 W≡13 C-13 C≡13 C-13 C≡W{OSi(OtBu)3 }3 ] (6*), which was additionally characterized by X-ray diffraction analysis. Depolymerization-macrocyclization of a carbazole-butadiyne polymer, obtained from 3,6-diethynyl-9-dodecylcarbazole (7) under copper-catalyzed Hay coupling conditions, was also efficiently catalyzed by 1 and afforded a mixture of mono-, diyne- and triyne-containing tetrameric macrocycles, revealing that diyne disproportionation into monoynes and triynes occurs as a slow side reaction that interferes with a high diyne metathesis selectivity. Potential catalytic pathways were studied by means of quantum-chemical calculations, and kinetic studies were performed to substantiate an α,α-mechanism for the catalytic diyne metathesis reaction, which involves intermediate alkynylalkylidyne and α,α'-dialkynylmetallacyclobutadiene intermediates.

Chemically inert oxidometal(V) corrols of molybdenum and rhenium undergo clean ligand-exchange reactions upon the action of SiCl4 . The resulting dichlorido complexes show trigonal prismatic coordination of the metal ion with the chlorine atoms residing in a cis configuration, and were studied by optical and resonance spectroscopy as well as DFT calculations. In situ reactivity studies with carbon nucleophiles indicate high reactivity for chlorine replacement. Treatment with sodium cyclopentadienide paves the way to robust molybdenum corrolocene half-sandwich complexes. These organometallic compounds are the first corrole species that stabilize an air-stable and diamagnetic low spin d2 -MoIV center. Structural, spectroelectrochemical, and chemical investigations prove a reversible MoIV /MoV redox couple close to the Fc/Fc+ potential for these systems. The high stability of the compounds in both redox states calls for future applications in catalysis and as redox switch.

The molybdenum and tungsten 2,4,6-trimethylbenzylidyne complexes [MesC equivalent to M{OC(CF3)(n)Me3-n}(3)] (M = Mo: MoF0, n = 0; MoF3, n = 1; MoF6, n = 2; MoF9, n = 3; M = W: WF3, n = 1; Mes = 2,4,6-trimethylphenyl) were prepared by the reaction of the tribromides [MesC=MBr3(dme)] (dme = 1,2-dimethoxyethane) with the corresponding potassium alkoxides KOC(CF3)(n)Me3-n. The molecular structures of all complexes were established by X-ray diffraction analysis. The catalytic activity of the resulting alkylidyne complexes in the homometathesis and ring-closing alkyne metathesis of internal and terminal alkynes was studied, revealing a strong dependency on the fluorine content of the alkoxide ligand. The different catalytic performances were rationalized by DFT calculations involving the metathesis model reaction of 2-butyne. Because the calculations predict the stabilization of metallacyclobutadiene (MCBD) intermediates by increasing the degree of fluorination, MoF9 was treated with 3-hexyne to afford the MCBD complex [(C3Et3)Mo{OC(CF3)(3)}(3)], which was characterized spectroscopically.

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

We report the first isolation of phosphine copper boryl complexes-species pivotal to numerous copper-catalyzed borylation reactions. The reaction of diboron(4) derivatives with copper terf-butoxide complexes of phosphine ligands allows the isolation of the dimeric mu-boryl-bridged Cu(l) complexes [(iPr(3)P)Cu-Bdmab](2)(4) and [(C6H4(Ph2P)(2))Cu-Bpin](2) (6) with Cu center dot center dot center dot Cu distances of 2.24-2.27 A (dmab = (NMe)(2)C6H4, pin = (OCMe2)(2))). A slightly more sterically demanding boryl ligand furnishes the unprecedented multinuclear copper boryl complex [(iPr(3)P)(2)Cu-8(B(iPrEn))(3)(OrBu)(3)] (5), a potential intermediate of the decomposition of an initial Cu(l) boryl complex (iPrEn = (NiPr)(2)C2H4). All complexes were characterized by single-crystal X-ray diffraction, NMR spectroscopy; and elemental analysis. DFT computations support the nature of these unique complexes and give insight into their electronic structures.

The reactions of the molybdenum alkylidyne complex [MesC[triple bond, length as m-dash]Mo{OCMe(CF3)2}3] (1) with the diaminoacetylenes R2NC[triple bond, length as m-dash]CNR2 (2, NR2 = 4-methylpiperidinyl; 3, NR2 = NEt2; Mes = 2,4,6-trimethylphenyl) afforded the metallacyclobutadiene (MCBD) complexes 4 and 5. In contrast to all other MCBD complexes, 4 and 5 are paramagnetic and best described as Mo(iv) species containing an anionic diaminodicarbene of the type [(R2N)CC(Mes)C(NR2)]-.

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

In February 2017, eleven "Spice-like" products (14 individual packages including replicates) from German language internet shops were analyzed. In total, three different synthetic cannabinoids (SCs) were identified by gas-chromatography-mass spectrometry (GC-MS), namely MDMB-CHMICA and two, so far only partially described compounds, 5F-Cumyl-P7AICA and Cumyl-PeGACLONE. All analyzed products contained only one synthetic cannabinoid as active ingredient. 5F-Cumyl-P7AICA and Cumyl-PeGACLONE were subject to an in-depth characterization by nuclear magnetic resonance spectroscopy (NMR), electron ionization mass spectrometry (EI-MS), electrospray ionization tandem mass spectrometry (ESI-MS/MS), infrared and ultraviolet-visible spectroscopy (IR and UV/Vis). Cumyl-PeGACLONE shows a rather unexpected structure compared to conventional SCs of the past. Hence a global minima calculation was conducted to demonstrate structural similarity of Cumyl-PeGACLONE to JWH-018, a classical SC. In addition, all SCs were quantified by a GC-MS method using JWH-018 as internal standard and corresponding response factors. While MDMB-CHMICA was detected in six out of 14 tested products (ranging from 6 to 20mg/g; average 10mg/g), 5F-Cumyl-P7AICA and Cumyl-PeGACLONE were detected in three (109-153mg/g; average 131mg/g) and five products (15-74mg/g; average 39mg/g), respectively.

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

A series of (allyl)palladium(II) complexes of anionic N-heterocyclic carbenes that contain a weakly coordinating borate moiety (WCA-NHC) were prepared by deprotonation of the carbene IPr with n-butyllithium in the 4-position, which was followed by addition of B(C6F5)3 and reaction of the resulting lithium carbene–borate with [(η3-allyl)Pd(μ-Cl)]2 (allyl = 2-propenyl, 2-butenyl, 2-methyl-2-propenyl, 1-phenyl-2-propenyl). In polar solvents such as tetrahydrofuran, chloropalladate complexes of the type [Li(THF)3][(WCA-NHC)PdCl(η3-allyl)] were formed, whereas the reactions in toluene afforded neutral complexes of the type [(WCA-NHC)Pd(η3-allyl)], which exhibit an intramolecular interaction with the N-aryl groups of the carbene ligands. The allyl-palladium complexes were employed as catalysts for the Buchwald–Hartwig amination of various aryl halides with morpholine.

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

The unsymmetrical diborane(4) pinB-B((RN)2(C6H4)) (R = Me, Bn) reacts with [(Me3P)4Rh-X] (X = Me, OtBu) giving predominantly either [(Me3P)4Rh-Bpin] or [(Me3P)3Rh-B((RN)2(C6H4))] depending on X. At low temperatures in the presence of excess PMe3 the unprecedented equatorial boryl complex [(Me3P)4Rh-B((MeN)2(C6H4))] is formed.

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

The bis(imidazolin-2-imine) ligand N,N'-bis(1,3-diisopropyl-4,5-dimethylimidazolin-2-ylidene)-1,1'-ferrocenediamine, fc(NIm)2 (1) was prepared. Its reaction with [NiCl2(dme)] (dme = 1,2-dimethoxyethane) or [PdCl2(MeCN)2] afforded the tetrahedral, paramagnetic complex [(1-κ(2)N,N')NiCl2] (6a) or the diamagnetic, square-planar complex [(1-κ(2)N,N')PdCl2] (6b), respectively. For the latter, slow rearrangement to the ionic complex [(1-κFe,κ(2)N,N')PdCl]Cl, [7]Cl, was observed, which was followed by (1)H NMR and UV/vis spectroscopy. Treatment of [7]Cl with NaBF4 afforded [7]BF4; the palladium atoms in both cations adopt square-planar environments with short Fe-Pd bonds (ca. 2.65 Å). In addition, a series of dicationic complexes of the type [(1-κFe,κ(2)N,N')ML](BF4)2 (8a: M = Ni, L = MeCN; 8b: M = Pd, L = MeCN; 9a: M = Ni, L = PMe3; 9b: M = Pd, L = PMe3) was prepared from 6a (M = Ni) or [7]BF4 by chloride abstraction with NaBF4 or AgBF4 in the presence of acetonitrile or trimethylphosphine, respectively. In the presence of triphenylphosphine, the palladium(II) complex [(1-κFe,κ(2)N,N')Pd(PPh3)](BF4)2 (10) was isolated. Iron-nickel and iron-palladium bonding in these complexes was studied experimentally by NMR, UV/vis, and Mössbauer spectroscopy and by cyclic voltammetry. Detailed DFT calculations were carried out for the cations [(1-κFe,κ(2)N,N')M(MeCN)](2+) in the 8a/8b couple, with Bader's atoms in molecules theory revealing the presence of noncovalent, closed-shell metal-metal interactions. Potential energy surface scans with successive elongation of the Fe-M bonds allow an estimation of the iron-metal bond dissociation energies (BDE) as BDE(Fe-Ni) = 11.3 kcal mol(-1) and BDE(Fe-Pd) = 24.3 kcal mol(-1).

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.