Supramolecular assemblies are of fundamental importance for cellular life and bio-interactive materials. The structure and function of these assemblies are decisively influenced by the design of their molecular components. In this work, we present a modular synthetic strategy for six novel bio-functional surfactants with a sulfonate headgroup (termed SupraVir surfactants). These amphiphilic molecules were designed for strong interactions with viral envelope proteins, virus inhibition, and to co-assemble water-soluble benzene-1,3,5-tricarboxamide derivatives (BTAs) to generate surfactant-grafted supramolecular polymers. Systematic spectroscopic and microscopic studies showed that the morphology of the co-assemblies strongly depends on the surfactant-BTA ratio. At surfactant ratios higher than 1, the native BTA nanofibers were disrupted, resulting in micellar architectures. In the test with herpes simplex virus (HSV-1), fibrous supramolecular polymers show significantly lower half-maximal inhibitory concentrations (IC50) compared to the corresponding micellar aggregates of the pure surfactants. Interestingly, the co-assemblies exhibited lower cytotoxicity than the functional surfactants alone, probably due to their structured incorporation into the polymeric scaffold. The dynamics of the co-assemblies, probed by hydrogen-deuterium exchange mass spectrometry (HDX-MS), showed correlations to the effectiveness. These results demonstrate a new co-assembly strategy of functional positioning antiviral surfactants in supramolecular scaffolds for the development of multivalent antiviral materials.

Efficient energy transport in nanoscale photonic and optoelectronic systems requires excitons to remain delocalized in the presence of structural and environmental disorder, a central challenge for real-world applications ranging from artificial light harvesting to quantum information processing. Here we show that Frenkel excitons in two-dimensional supramolecular nanomaterials preserve extensive delocalization even in the presence of intentionally embedded deep-energy traps. Using fluorescent trap molecules introduced during the self-assembly of double-walled molecular nanotubes, we created a model system in which traps are incorporated without compromising the host lattice’s structural integrity. Polarization-resolved microscopy of individual nanotubes reveals that exciton delocalization is remarkably robust against trap incorporation. Complementary theoretical simulations based on realistic molecular geometries reproduce the experimental behaviour and further demonstrate that excitons adaptively redistribute to avoid trap sites. These results establish that higher-dimensional supramolecular architectures can sustain efficient exciton transport under fabrication-relevant levels of disorder, highlighting a key advantage of multidimensional excitonic materials and pointing toward the similar behaviour expected in fully three-dimensional systems.

Expansion microscopy (ExM) is a recently developed technique that allows for the resolution of structures below the diffraction limit by physically enlarging a hydrogel-embedded facsimile of the biological sample. The target structure is labeled and this label must be retained in a relative position true to the original, smaller state before expansion by linking it into the gel. However, gel formation and digestion lead to a significant loss in target-delivered label, resulting in weak signal. To overcome this problem, we have here developed an agent combining targeting, fluorescent labeling and gel linkage in a single small molecule. Similar approaches in the past have still suffered from significant loss of label. Here we show that this loss is due to insufficient surface grafting of fluorophores into the hydrogel and develop a solution by increasing the amount of target-bound monomers. Overall, we obtain a significant improvement in fluorescence signal retention and our new dye allows the resolution of nuclear pores as ring-like structures, similar to STED microscopy. We furthermore provide mechanistic insight into dye retention in ExM.

Lanthanide-based, spectrally shifting, and multi-color luminescent upconverting nanoparticles (UCNPs) have received much attention in the last decades because of their applicability as reporter for bioimaging, super-resolution microscopy, and sensing as well as barcoding and anti-counterfeiting tags. A prerequisite for the broad application of UCNPs in areas such as sensing and encoding are simple, robust, and easily upscalable synthesis protocols that yield large quantities of UCNPs with sizes of 20 nm or more with precisely controlled and tunable physicochemical properties from low-cost reagents with a high reproducibility. In this context, we studied the reproducibility, robustness, and upscalability of the synthesis of β-NaYF 4 :Yb, Er UCNPs via thermal decomposition. Reaction parameters included solvent, precursor chemical compositions, ratio, and concentration. The resulting UCNPs were then examined regarding their application-relevant physicochemical properties such as size, size distribution, morphology, crystal phase, chemical composition, and photoluminescence. Based on these screening studies, we propose a small volume and high-concentration synthesis approach that can provide UCNPs with different, yet controlled size, an excellent phase purity and tunable morphology in batch sizes of up to at least 5 g which are well suited for the fabrication of sensors, printable barcodes or authentication and recycling tags.

We have successfully printed an anatomically shaped hand model with properties similar to in vivo investigations with a fluorescence hand imager using indocyanine green (ICG). By adding the fluorescent dye Lumogen IR 765, titanium dioxide powder and black ink to a 3D printing methacrylate photopolymer we realized phantoms with physiologically relevant absorption and reduced scattering coefficients as well as fluorescence properties similar to the widely applied contrast agent ICG. The phantoms show an excellent long-term photostability making them well suited for device performance monitoring and comparison. In contrast, fluorescence of phantoms printed with ICG continuously decreases over time.

G protein-coupled receptors can adopt many different conformational states, each of them exhibiting different restraints towards downstream signaling pathways. One promising strategy to identify and quantify this conformational landscape is to introduce a cysteine at a receptor site sensitive to different states and label this cysteine with a probe for detection. Here, the application of NMR of hyperpolarized 129Xe for the detection of the conformational states of human neuropeptide Y2 receptor is introduced. The xenon trapping cage molecule cryptophane-A attached to a cysteine in extracellular loop 2 of the receptor facilitates chemical exchange saturation transfer experiments without and in the presence of native ligand neuropeptide Y. High-quality spectra indicative of structural states of the receptor–cage conjugate were obtained. Specifically, five signals could be assigned to the conjugate in the apo form. After the addition of NPY, one additional signal and subtle modifications in the persisting signals could be detected. The correlation of the spectroscopic signals and structural states was achieved with molecular dynamics simulations, suggesting frequent contact between the xenon trapping cage and the receptor surface but a preferred interaction with the bound ligand.

Conjugation of poly(ethylene glycol) (PEG) to biologics is a successful strategy to favorably impact the pharmacokinetics and efficacy of the resulting bioconjugate. We compare bioconjugates synthesized by strain-promoted azide-alkyne cycloaddition (SPAAC) using PEG and linear polyglycerol (LPG) of about 20 kDa or 40 kDa, respectively, with an azido functionalized human Interferon-α2a (IFN-α2a) mutant. Site specific PEGylation and LPGylation resulted in IFN-α2a bioconjugates with improved in vitro potency as compared to commercial Pegasys. LPGylated bioconjugates had faster disposition kinetics despite comparable hydrodynamic radii to their PEGylated analogues. Overall exposure of the PEGylated IFN-α2a with a 40 kDa polymer exceeded Pegasys which, in return, was comparable to the 40 kDa LPGylated conjugates. The study points to an expanded polymer design space by means of which the selected polymer class may result in different distribution of the studied bioconjugates.

The redox chemistry and status of different cell types and tissues has still not been well understood and thus represents a major focus for the development of novel responsive fluorophores. In this context, there is ongoing search for reduction-sensitive probes that can globally or specifically image reducing environments species in biological settings. Here, the synthesis and characterization of responsive cyanine dyes operating in the near-infrared (NIR) is reported based on the use of the hydroquinone/quinone and catechol/quinone couple. The introduction of a hydroquinone group into the meso-position of an indodicarbocyanine dye via a Suzuki cross coupling reaction created a water-soluble fluorescent "on-off-on " probe whose fluorescence can be modulated through oxidation and reduction. By adding biologically relevant reducing species, such as glutathione, cysteine or ascorbate, the "off "-probe could be rapidly turned on around 660 nm within 30 s. Reversible switching tween the "on " and "off " form was demonstrated. Furthermore, the sensor was applied in confocal microscopy studies as a reduction-sensitive probe for bioimaging in living cells.

Polymer conjugation to biologics is of key interest to the pharmaceutical industry for the development of potent and long acting biotherapeutics, with poly(ethylene glycol) (PEG) being the gold standard. Within the last years, unwanted PEG-related side effects (immunological reactions, antibody formation) arose, therefore creating several attempts to establish alternative polymers with similar potential to PEG. In this article, we synthesized N-terminal bioconjugates of the potential therapeutic human interleukin-4 (hIL-4 WT) with linear polyglycerol (LPG) of 10 and 40 kDa and compared it with its PEG analogs of same nominal weights. Polyglycerol is a highly hydrophilic polymer with good biocompatibility and therefore represents an alternative polymer to PEG. Both polymer types resulted in similar conjugation yields, comparable hydrodynamic sizes and an unaltered secondary structure of the protein after modification. LPG- and PEG-bioconjugates remained stable in human plasma, whereas binding to human serum albumin (HSA) decreased after polymer modification. Furthermore, only minor differences in bioactivity were observed between LPG- and PEG-bioconjugates of same nominal weights. The presented findings are promising for future pharmacokinetic evaluation of hIL-4-polymer bioconjugates. (C) 2021 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.

Significance: Fluorescence imaging of rheumatoid diseases with indocyanine green (ICG) is an emerging technique with unique potential for diagnosis and therapy. Device characterization, monitoring of the performance, and further developments of the technique require tissue-equivalent fluorescent phantoms of high stability with appropriate anatomical shapes. Aim: Our investigations aim at the development of a three-dimensional (3D) printing technique to fabricate hand and finger models with appropriate optical properties in the near-infrared spectral range. These phantoms should have fluorescence properties similar to ICG, and excellent photostability and durability over years. Approach: We modified a 3D printing methacrylate photopolymer by adding the fluorescent dye Lumogen IR 765 to the raw material. Reduced scattering and absorption coefficients were adjusted to values representative of the human hand by incorporating titanium dioxide powder and black ink. The properties of printed phantoms of various compositions were characterized using UV/Vis and fluorescence spectroscopy, and time-resolved measurements. Photostability and bleaching were investigated with a hand imager. For comparison, several phantoms with ICG as fluorescent dye were printed and characterized as well. Results: The spectral properties of Lumogen IR 765 are very similar to those of ICG. By optimizing the concentrations of Lumogen, titanium dioxide, and ink, anatomically shaped hand and vessel models with properties equivalent to in vivo investigations with a fluorescence hand imager could be printed. Phantoms with Lumogen IR 765 had an excellent photostability over up to 4 years. In contrast, phantoms printed with ICG showed significant bleaching and degradation of fluorescence over time. Conclusions: 3D printing of phantoms with Lumogen IR 765 is a promising method for fabricating anatomically shaped fluorescent tissue models of excellent stability with spectral properties similar to ICG. The phantoms are well-suited to monitor the performance of hand imagers. Concepts can easily be transferred to other fluorescence imaging applications of ICG. (C) The Authors. Published by SPIE under a Creative Commons Attribution 4.0 International License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.

Exenatide is a small therapeutic peptide being currently used in clinic for the treatment of diabetes mellitus type II, however, displaying a short blood circulation time which makes two daily injections necessary. Covalent polymer modification of a protein is a well-known approach to overcome this limitation, resulting in steric shielding, an increased size and therefore a longer circulation half-life. In this study, we employed site-selective C-terminal polymer ligation of exenatide via copper-catalyzed azide-alkyne-cycloaddition (CuAAC) to yield 1:1conjugates of either poly(ethylene glycol) (PEG) or linear polyglycerol (LPG) of different molecular weights. Our goal was to compare the impact of the two polymers on size, structure and activity of exenatide on the in vitro and in vivo level. Both polymers did not alter the secondary structure of exenatide and expectedly increased its hydrodynamic size, where the LPG-versions of exenatide showed slightly smaller values than their PEG-analogs of same molecular weight. Upon conjugation, GLP-1 receptor activation was diminished, however, still enabled maximum receptor response at slightly higher concentrations. Exenatide modified with a 40 kDa LPG (Ex-40LPG) showed significant reduction of the blood glucose level in diabetic mice for up to 72 h, which was comparable to its PEG-analog, but 9-fold longer than native exenatide (8 h).

Conjugation of biologics with polymers modulates their pharmacokinetics, with polyethylene glycol (PEG) as the gold standard. We compared alternative polymers and two types of cyclooctyne linkers (BCN/DBCO) for bioconjugation of interferon-α2a (IFN-α2a) using 10 kDa polymers including linear mPEG, poly(2-ethyl-2-oxazoline) (PEtOx), and linear polyglycerol (LPG). IFN-α2a was azide functionalized via amber codon expansion and bioorthogonally conjugated to all cyclooctyne linked polymers. Polymer conjugation did not impact IFN-α2a's secondary structure and only marginally reduced IFN-α2a's bioactivity. In comparison to PEtOx, the LPG polymer attached via the less rigid cyclooctyne linker BCN was found to stabilize IFN-α2a against thermal stress. These findings were further detailed by molecular modeling studies which showed a modulation of protein flexibility upon PEtOx conjugation and a reduced amount of protein native contacts as compared to PEG and LPG originated bioconjugates. Polymer interactions with IFN-α2a were further assessed via a limited proteolysis (LIP) assay, which resulted in comparable proteolytic cleavage patterns suggesting weak interactions with the protein's surface. In conclusion, both PEtOx and LPG bioconjugates resulted in a similar biological outcome and may become promising PEG alternatives for bioconjugation.

Multimodal imaging probes have attracted the interest of ongoing research, for example, for the surgical removal of tumors. Modular synthesis approaches allow the construction of hybrid probes consisting of a radiotracer, a fluorophore and a targeting unit. We present the synthesis of a new asymmetric bifunctional cyanine dye that can be used as a structural and functional linker for the construction of such hybrid probes. Ga-68-DOTATATE, a well-characterized radiopeptide targeting the overexpressed somatostatin receptor subtype 2 (SSTR2) in neuroendocrine tumors, was labeled with our cyanine dye, thus providing additional information along with the data obtained from the radiotracer. We tested the SSTR2-targeting and imaging properties of the resulting probe Ga-68-DOTA-ICC-TATE in vitro and in a tumor xenograft mouse model. Despite the close proximity between dye and pharmacophore, we observed a high binding affinity towards SSTR2 as well as elevated uptake in SSTR2-overexpressing tumors in the positron emission tomography (PET) scan and histological examination.

Since several decades, PEGylation is known to be the clinical standard to enhance pharmacokinetics of biotherapeutics. In this study, we introduce polyglycerol (PG) of different lengths and architectures (linear and hyperbranched) as an alternative polymer platform to poly(ethylene glycol) (PEG) for half-life extension (HLE). We designed site-selective N-terminally modified PG-protein conjugates of the therapeutic protein anakinra (IL-1ra, Kineret) and compared them systematically with PEG analogues of similar molecular weights. Linear PG and PEG conjugates showed comparable hydrodynamic sizes and retained their secondary structure, whereas binding affinity to IL-1 receptor 1 decreased with increasing polymer length, yet remained in the low nanomolar range for all conjugates. The terminal half-life of a 40 kDa linear PG-modified anakinra was extended 4-fold compared to the unmodified protein, close to its PEG analogue. Our results demonstrate similar performances of PEG- and PG-anakinra conjugates and therefore highlight the outstanding potential of polyglycerol as a PEG alternative for half-life extension of biotherapeutics.

This study identified and confirmed angiotensin II (ATII) as a strong activator of signaling in neuroendocrine neoplasm (NEN) cells. Expression analyses of the ATII receptor type 1 (AGTR1) revealed an upregulation of mRNA levels (RT-qPCR) and radioligand binding (autoradiography) in small-intestinal (n = 71) NEN tissues compared to controls (n = 25). NEN cells with high AGTR1 expression exhibited concentration-dependent calcium mobilization and chromogranin A secretion upon stimulation with ATII, blocked by AGTR1 antagonism and Gαq inhibition. ATII also stimulated serotonin secretion from BON cells. AGTR1 ligand saralasin was coupled to a near-infrared fluorescent (NIRF) dye and tested for its biodistribution in a nude mouse model bearing AGTR1-positive BON and negative QGP-1 xenograft tumors. NIRF imaging showed significantly higher uptake in BON tumors. This proof of concept establishes AGTR1 as a novel target in NEN, paving the way for translational chelator-based probes for diagnostic PET imaging and radioligand therapy.

Stimuli-responsive polymer-drug conjugates (PDCs) provide promising approaches in anticancer treatment. Here, we report the synthesis and biological evaluation of PDCs made of the highly potent antimitotic agent monomethyl auristatin E conjugated to dendritic polyglycerol and dendritic polyglycerol sulfate via a reductively cleavable, self-immolative disulfide linker. Cell viability assays with the human cancer cell lines A549 (lung carcinoma) and HeLa (cervix carcinoma) revealed that the drug's cytotoxicity was reduced by conjugation to the polymers, with the sulfated conjugates being more effective than the non-sulfated ones. Kinetic studies using real-time cell analysis indicated a retarded drug release from the polymers, with a much later cytotoxic response after treatment with the non-sulfated conjugates due to less cellular uptake, as confirmed by flow cytometry and confocal laser scanning microscopy. In contrast, the non-cleavable dPGS-MMAE conjugate that was synthesized for comparison was not cytotoxic under the same conditions. Overall, reductively cleavable dPGS-SS-MMAE conjugates showed promising results in vitro and good tolerability in vivo. Further in vivo studies are planned.

Biological membrane fluidity and thus the local viscosity in lipid membranes are of vital importance for many life processes and implicated in various diseases. Here, we introduce a novel viscosity sensor design for lipid membranes based on a reporting nanoparticle, a sulfated dendritic polyglycerol (dPGS), conjugated to a fluorescent molecular rotor, indocarbocyanine (ICC). We show that dPGS-ICC provides high affinity to lipid bilayers, enabling viscosity sensing in the lipid tail region. The systematic characterization of viscosity- and temperature-dependent photoisomerization properties of ICC and dPGS-ICC allowed us to determine membrane viscosities in different model systems and in living cells using fluorescence lifetime imaging (FLIM). dPGS-ICC distinguishes between ordered lipids and the onset of membrane defects in small unilamellar single lipid vesicles and is highly sensitive in the fluid phase to small changes in viscosity introduced by cholesterol. In microscopy-based viscosity measurements of large multilamellar vesicles, we observed an order of magnitude more viscous environments by dPGS-ICC, lending support to the hypothesis of heterogeneous nanoviscosity environments even in single lipid bilayers. The existence of such complex viscosity structures could explain the large variation in the apparent membrane viscosity values found in the literature, depending on technique and probe, both for model membranes and live cells. In HeLa cells, a tumor-derived cell line, our nanoparticle-based viscosity sensor detects a membrane viscosity of ∼190 cP and is able to discriminate between cell membrane and intracellular vesicle localization. Thus, our results show the versatility of the dPGS-ICC nano-conjugate in physicochemical and biomedical applications by adding a new analytical functionality to its medical properties.

Cyanine 3 is an amphiphilic fluorescent dye used in optical imaging, bioengineering, and for cellular internalization. However, the applications of the dye are limited due to its poor aqueous stability, aggregation tendency, and lack of selectivity. To address these issues, we have developed PEG and azidotriglycerol based dendronized polymers using Novozym 435 as a biocatalyst under solvent free conditions. The resulting polymer having azido and hydroxyl functionalities available in the backbone were further grafted with alkyl chains and polyglycerol dendrons using esterification and 'Click' chemistry approach. These polymers form stable micelles at micromolar concentration. All the polymers were characterized from their spectral data and their tendency to encapsulate cyanine 3 dye studied using UV-Vis and fluorescence spectroscopy. The cytotoxicity study of the polymers performed against A549 cell lines suggests them to be nontoxic up to a concentration of 500 mu g/ml.

Dendritic polyglycerol sulfate (dPGS) has originally been investigated as an anticoagulant to potentially substitute for the natural glycosaminoglycan heparin. Compared to unfractionated heparin, dPGS possesses lower anticoagulant activity but a much higher anticomplementary effect. Since coagulation, complement activation, and inflammation are often present in the pathophysiology of numerous diseases, dPGS polymers with both anticoagulant and anticomplementary activities represent promising candidates for the development of polymeric drugs of nanosized architecture. In this review, we describe the nanomedical applications of dPGS based on its anti-inflammatory activity. Furthermore, the application of dPGS as a carrier molecule for diagnostic molecules and therapeutic drugs is reviewed, based on the ability to target tumors and localize in tumor cells. Finally, the application of dPGS for inhibition of virus infections is described.

Glioblastoma is a highly aggressive brain tumor. Current standard-of-care results in a marginal therapeutic outcome, partly due to acquirement of resistance and insufficient blood-brain barrier (BBB) penetration of chemotherapeutics. To circumvent these limitations, we conjugated the chemotherapy paclitaxel (PTX) to a dendritic polyglycerol sulfate (dPGS) nanocarrier. dPGS is able to cross the BBB, bind to P/L-selectins and accumulate selectively in intracranial tumors. We show that dPGS has dual targeting properties, as we found that P-selectin is not only expressed on tumor endothelium but also on glioblastoma cells. We delivered dPGS-PTX in combination with a peptidomimetic of the anti-angiogenic protein thrombospondin-1 (TSP-1 PM). This combination resulted in a remarkable synergistic anticancer effect on intracranial human and murine glioblastoma via induction of Fas and Fas-L, with no side effects compared to free PTX or temozolomide. This study shows that our unique therapeutic approach offers a viable alternative for the treatment of glioblastoma.