Hydrogels are frequently used in regenerative medicine due to their hydrated, tissue-compatible nature, and tuneable mechanics. While many strategies enable bulk mechanical modulation, little attention is given to tuning surface tribology, and its impact on cellular behavior under mechanical stimuli. Here, we demonstrate that photocrosslinking hydrogels on hydrophobic substrates leads to significant, long-lasting reductions in surface friction, ideal for cartilage tissue regeneration. Gelatin methacryloyl and hyaluronic acid methacrylate hydrogels photocrosslinked on polytetrafluoroethylene possess more hydrated, lubricious surfaces, with lower friction coefficients and crosslinking densities than those crosslinked on glass. This facilitated self-lubrication via water exudation, limiting shear during biaxial stimulation. When subject to intermittent biaxial loading mimicking joint movement, low-friction chondrocyte-laden neo-tissues formed superior hyaline cartilage, confirming the benefits of reduced friction on tissue development. Finally, in situ photocrosslinking enabled precise hydrogel formation in a full-thickness cartilage defect, highlighting the clinical potential and emphasizing the importance of crosslinking substrate in regenerative medicine.

Polymer-based adhesives are used in tissue repair; however, their application is frequently limited by suboptimal mechanical or adhesive properties. This study aims to develop a natural polymer-based photo-cross-linkable and structurally robust bioadhesive hydrogel, utilizing gelatin methacryloyl (GelMA) and chitosan. We compared the mechanical properties and adhesiveness of various GelMA-chitosan hydrogel formulations cross-linked by three different photo-initiator systems—[tris (2,2′-bipyridyl) dichlororuthenium (II) hexahydrate ([RuII (bpy)3]2+ and sodium persulfate (Ru/SPS), lithium acylphosphinate (LAP), and 1-[4-(2-hydroxyethoxy)-phenyl]-2-hydroxy-2-methyl-1-propanone (Irgacure 2959)]. The Ru/SPS cross-linked GelMA-chitosan hydrogel showed a higher compressive modulus than GelMA hydrogel at both neutral and alkaline pHs, suggesting potential use during infection or delayed wound healing. Chitosan addition to GelMA significantly enhanced hydrogel adhesiveness, with Ru/SPS cross-linked hydrogel exhibiting the highest adhesive strength to cartilage (tensile: ⁓100 kPa) and skin (tensile: ⁓25 kPa, lap shear: ⁓43 kPa). Rheological analysis confirmed the shear-thinning behaviour of the hydrogel precursor solution, indicating its injectability. Moreover, the hydrogel demonstrated robust adhesion to cartilage and skin during ex vivo joint movement and skin bend tests, suggesting its utility in dynamic tissue environments. This study suggests that Ru/SPS cross-linked GelMA-chitosan hydrogel is a promising natural polymer-based bioadhesive, warranting further exploration in a variety of tissue repair applications.

Osteoarthritis (OA) is a prevalent degenerative joint disease affecting over 530 million individuals worldwide. Recent studies suggest a potential link between iron overload, a condition characterised by the excessive accumulation of iron in the body, and the onset of OA. Iron is essential for various biological processes, and any disruption in its homeostasis can trigger significant health effects, including OA. This study aimed to elucidate the effects of excess iron on joint tissue and the underlying mechanisms associated with excess iron and OA development. Human articular cartilage (n = 6) and synovium (n = 4) were collected from patients who underwent total knee arthroplasty. Cartilage and synovium explants were incubated with a gradually increasing concentration of ferric ammonium citrate for 3 days respectively. The effects of iron homeostasis in tissue explants were analysed using a Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS). To further study the effects of iron excess on OA initiation and development, male 3-week-old Hfe−/− and 5-week-old Tfr2−/− mice, animal models of hereditary haemochromatosis were established. Littermate wild-type mice were fed a high-iron diet to induce dietary overload. All animals were sacrificed at 8 weeks of age, and knee joints were harvested for histological analysis. The LA-ICP-MS analysis unveiled changes in the elemental composition related to iron metabolism, which included alterations in FTH1, FPN1, and HAMP within iron(III)-treated cartilage explants. While chondrocyte viability remained stable under different iron concentrations, ex vivo treatment with a high concentration of Fe3+ increased the catabolic gene expression of MMP13. Similar alterations were observed in the synovium, with added increases in GAG content and inflammation markers. In vivo studies further supported the role of iron overload in OA development as evidenced by spontaneous OA symptoms, proteoglycan loss, increased Mankin scores, synovial thickening, and enhanced immunohistochemical expression of MMP13, ADAMTS5, and P21 in Hfe−/−, Tfr2−/−, and diet-induced iron overload mouse models. Our findings elucidate the specific pathways through which excess iron accelerates OA progression and highlights potential targets for therapeutic intervention aimed at modulating iron levels to mitigate OA symptoms.

Hydrogels provide a promising platform for cartilage repair and regeneration. Although hydrogels have shown some efficacy, they still have shortcomings including poor mechanical properties and suboptimal integration with surrounding cartilage. Herein, hydrogels that are injectable, cytocompatible, mechanically robust, and highly adhesive to cartilage are developed. This approach uses GelMA-glycol chitosan (GelMA-GC) that is crosslinkable with visible light and photoinitiators (lithium acylphosphinate and tris (2,2'-bipyridyl) dichlororuthenium (II) hexahydrate ([RuII(bpy)3 ]2+ and sodium persulfate (Ru/SPS)). Ru/SPS-cross-linked hydrogels have higher compressive and tensile modulus, and most prominently higher adhesive strength with cartilage, which also depends on inclusion of GC. Tensile and push-out tests of the Ru/SPS-cross-linked GelMA-GC hydrogels demonstrate adhesive strength of ≈100 and 46 kPa, respectively. Hydrogel precursor solutions behave in a Newtonian manner and are injectable. After injection in focal bovine cartilage defects and in situ cross-linking, this hydrogel system remains intact and integrated with cartilage following joint manipulation ex vivo. Cells remain viable (>85%) in the hydrogel system and further show tissue regeneration potential after three weeks of in vitro culture. These preliminary results provide further motivation for future research on bioadhesive hydrogels for cartilage repair and regeneration.

The aim of this case study was to assess potential temporal and spatial differences in productivity measures of vessels operating in the Queensland spanner crab fishery. This fishery's logbook records of catch and effort data allowed analysis of the impact of fishery management changes on productivity measures. Data envelopment analysis (DEA) with a 'window analysis' approach was used to derive estimates for measures of technical efficiency, capacity utilisation and scale efficiency over time for five different spanner crab fishing regions. The results suggest that average technical efficiency and capacity utilisation were relatively low over time and across fishing regions, implying a high level of technical inefficiency and the existence of excess capacity in the fishery. Scale efficiency was found to be high historically but decreased slightly since 2006 for all regions. The results suggest that this decline is likely not caused by the fishery management changes, but instead is due to other factors. Additional data (e.g., revenue, profit, costs, skipper experience) and analysis is needed to assess the causes for the low technical efficiency and capacity utilisation and reasons for the decrease in scale efficiency as a baseline for specific fishery management recommendations. The study shows that temporal and spatial efficiency and productivity analysis of fisheries can help identify potential issues that are not otherwise apparent.

Untreated osteochondral defects are a leading cause of osteoarthritis, a condition that places a heavy burden on both patients and orthopedic surgeons. Although tissue engineering has shown promise for creating mechanically similar cartilage-like constructs, their integration with cartilage remains elusive. Therefore, a formulation of biodegradable, biocompatible biomaterial with sufficient mechanical and adhesive properties for cartilage repair is required. To accomplish this, we prepared biocompatible, photo-curable, mechanically robust, and highly adhesive GelMA-glycol chitosan (GelMA-GC) hydrogels. GelMA-GC hydrogels had a modulus of 283 kPa and provided a biocompatible environment (>70% viability of embedded chondrocytes) in long-term culture within a bovine cartilage ring. The adhesive strength of bovine chondrocyte-laden GelMA-GC hydrogel to bovine cartilage increased from 38 to 52 kPa over four weeks of culture. Moreover, intermittent uniaxial mechanical stimulation enhanced the adhesive strength to ∼60 kPa, indicating that the cartilage-hydrogel integration could remain secure and functional under dynamic loading conditions. Furthermore, gene expression data and immunofluorescence staining revealed the capacity of chondrocytes in GelMA-GC hydrogel to synthesize chondrogenic markers (COL2A1 and ACAN), suggesting the potential for tissue regeneration. The promising in vitro results of this work motivate further exploration of the potential of photo-curable GelMA-GC bioadhesive hydrogels for cartilage repair and regeneration.

Lung cancer has the highest incidence and mortality among all cancers, with non-small cell lung cancer (NSCLC) accounting for 85–90% of all lung cancers. Here we investigated the function of COMMD1 in the repair of DNA double strand breaks (DSBs) and as a prognostic and therapeutic target in NSCLC. COMMD1 function in DSB repair was investigated using reporter assays in COMMD1-siRNA-depleted cells. The role of COMMD1 in NSCLC was investigated using bioinformatic analysis, qRT-PCR and immunoblotting of control and NSCLC cells, tissue microarrays, cell viability and cell cycle experiments. DNA repair assays demonstrated that COMMD1 is required for the efficient repair of DSBs and reporter assays showed that COMMD1 functions in both non-homologous-end-joining and homologous recombination. Bioinformatic analysis showed that COMMD1 is upregulated in NSCLC, with high levels of COMMD1 associated with poor patient prognosis. COMMD1 mRNA and protein were upregulated across a panel of NSCLC cell lines and siRNA-mediated depletion of COMMD1 decreased cell proliferation and reduced cell viability of NSCLC, with enhanced death after exposure to DNA damaging-agents. Bioinformatic analyses demonstrated that COMMD1 levels positively correlate with the gene ontology DNA repair gene set enrichment signature in NSCLC. Taken together, COMMD1 functions in DSB repair, is a prognostic maker in NSCLC and is potentially a novel anti-cancer therapeutic target for NSCLC.

The conventional mechanical properties of articular cartilage, such as compressive stiffness, have been shown to have limited capacity to distinguish visually normal from degraded cartilage samples. In this study, a new mechanical indentation framework for assessing functional properties of articular cartilage during loading/unloading, i.e. deformation and recovery, was established. The capacity of a ring-shaped indenter integrated with an ultrasound transducer to distinguish mechanically intact from proteoglycan-depleted tissue was investigated. To achieve this, normal and enzymatically degraded bovine osteochondral samples were subjected to loading/unloading while the response of the tissue at the middle was captured by ultrasound at the same time. The enzymatic degradation model was characterized by amount of proteoglycan content, glycosaminoglycan release and proteomic analysis. The mechanical response of a wider continuum of articular cartilage in the loaded area and its surrounding region was captured in this framework leading to investigate two parameters, L and TS, related to the surrounding tissue of the loaded area for functional assessment of cartilage. L is the distance between the ultrasound transducer and articular cartilage surface and TS is the transient strain of articular cartilage during loading and unloading. Classification Analysis based on Principal Component Analysis was used to investigate the capacity of the new parameters to assess the functionality of the tissue. Multivariate statistics based on Partial Least Squares regression was employed to identify the correlation between the response of the tissue in the indented area and its surrounding cartilage. The results of this study indicate that L during loading (deformation) can differentiate normal and mildly proteoglycan-depleted samples from severely depleted samples and L during unloading (recovery) can distinguish between normal and proteoglycan-depleted tissue. However, TS during deformation and recovery is unable to discriminate normal cartilage samples from proteoglycan-depleted tissue. The results also demonstrate a strong correlation between mechanical properties of the loaded area with the response of its surrounding cartilage during recovery. It is therefore concluded that L in this newly established framework can discriminate between normal and proteoglycan-depleted cartilage samples. However, more samples will be needed to verify the demarcation between samples degraded for varying amount of time.

Adult chondrocytes are surrounded by a protein- and glycosaminoglycan-rich extracellular matrix and are subjected to dynamic mechanical compression during daily activities. The extracellular matrix and mechanical stimuli play an important role in chondrocyte biosynthesis and homeostasis. In this study, we aimed to develop scaffold and compressive loading conditions that mimic the native cartilage micro-environment and enable enhanced chondrogenesis for tissue engineering applications. Towards this aim, we fabricated porous scaffolds based on silk fibroin (SF) and SF with gelatin/chondroitin sulfate/hyaluronate (SF-GCH), seeded the scaffolds with either human bone marrow mesenchymal stromal cells (BM-MSCs) or chondrocytes, and evaluated their performance with and without dynamic compression. Human chondrocytes derived from osteoarthritic joints and BM-MSCs were seeded in scaffolds, precultured for 1 week, and subjected to compression with 10% dynamic strain at 1 Hz, 1 hr/day for 2 weeks. When dynamic compression was applied, chondrocytes significantly increased expression of aggrecan (ACAN) and collagen X (COL10A1) up to fivefold higher than free-swelling controls. In addition, dynamic compression dramatically improved the chondrogenesis and chondrocyte biosynthesis cultured in both SF and SF-GCH scaffolds evidenced by glycosaminoglycan (GAG) content, GAG/DNA ratio, and immunostaining of collagen type II and aggrecan. However, both chondrocytes and BM-MSCs cultured in SF-GCH scaffolds under dynamic compression showed higher GAG content and compressive modulus than those in SF scaffolds. In conclusion, the micro-environment provided by SF-GCH scaffolds and dynamic compression enhances chondrocyte biosynthesis and matrix accumulation, indicating their potential for cartilage tissue engineering applications.

Biological tissues at articulating surfaces, such as articular cartilage, typically have remarkable low-friction properties that limit tissue shear during movement. However, these frictional properties change with trauma, aging, and disease, resulting in an altered mechanical state within the tissues. Yet, it remains unclear how these surface changes affect the behaviour of embedded cells when the tissue is mechanically loaded. Here, we developed a cytocompatible, bilayered hydrogel system that permits control of surface frictional properties without affecting other bulk physicochemical characteristics such as compressive modulus, mass swelling ratio, and water content. This hydrogel system was applied to investigate the effect of variations in surface friction on the biological response of human articular chondrocytes to shear loading. Shear strain in these hydrogels during dynamic shear loading was significantly higher in high-friction hydrogels than in low-friction hydrogels. Chondrogenesis was promoted following dynamic shear stimulation in chondrocyte-encapsulated low-friction hydrogel constructs, whereas matrix synthesis was impaired in high-friction constructs, which instead exhibited increased catabolism. Our findings demonstrate that the surface friction of tissue-engineered cartilage may act as a potent regulator of cellular homeostasis by governing the magnitude of shear deformation during mechanical loading, suggesting a similar relationship may also exist for native articular cartilage. STATEMENT OF SIGNIFICANCE: Excessive mechanical loading is believed to be a major risk factor inducing pathogenesis of articular cartilage and other load-bearing tissues. Yet, the mechanisms leading to increased transmission of mechanical stimuli to cells embedded in the tissue remain largely unexplored. Here, we demonstrate that the tribological properties of loadbearing tissues regulate cellular behaviour by governing the magnitude of mechanical deformation arising from physiological tissue function. Based on these findings, we propose that changes to articular surface friction as they occur with trauma, aging, or disease, may initiate tissue pathology by increasing the magnitude of mechanical stress on embedded cells beyond a physiological level.

Biochemically modified proteins have attracted significant attention due to their widespread applications as biomaterials. For instance, chemically modified gelatin derivatives have been widely explored to develop hydrogels for tissue engineering and regenerative medicine applications. Among the reported methods, modification of gelatin with methacrylic anhydride (MA) stands out as a convenient and efficient strategy to introduce functional groups and form hydrogels via photopolymerization. Combining light-activation of modified gelatin with soft lithography has enabled the materialization of microfabricated hydrogels. So far, this gelatin derivative has been referred to in the literature as gelatin methacrylate, gelatin methacrylamide, or gelatin methacryloyl, with the same abbreviation of GelMA. Considering the complex composition of gelatin and the presence of different functional groups on the amino acid residues, both hydroxyl groups and amine groups can possibly react with methacrylic anhydride during functionalization of the protein. This can also apply to the modification of other proteins, such as recombinant human tropoelastin to form MA-modified tropoelastin (MeTro). Here, we employed analytical methods to quantitatively determine the amounts of methacrylate and methacrylamide groups in MA-modified gelatin and tropoelastin to better understand the reaction mechanism. By combining two chemical assays with instrumental techniques, such as proton nuclear magnetic resonance (1H NMR) and liquid chromatography tandem-mass spectrometry (LC-MS/MS), our results indicated that while amine groups had higher reactivity than hydroxyl groups and resulted in a majority of methacrylamide groups, modification of proteins by MA could lead to the formation of both methacrylamide and methacrylate groups. It is therefore suggested that the standard terms for GelMA and MeTro should be defined as gelatin methacryloyl and methacryloyl-substituted tropoelastin, respectively, to remain consistent with the widespread abbreviations used in literature.

The ex vivo engineering of autologous cartilage tissues has the potential to revolutionize the clinical management of joint disorders. Yet, high manufacturing costs and variable outcomes associated with tissue-engineered implants are still limiting their application. To improve clinical outcomes and facilitate a wider use of engineered tissues, automated bioreactor systems capable of enhancing and monitoring neotissues are required. Here, we developed an innovative system capable of applying precise uni- or biaxial mechanical stimulation to developing cartilage neotissues in a tightly controlled and automated fashion. The bioreactor allows for simple control over the loading parameters with a user-friendly graphical interface and is equipped with a load cell for monitoring tissue maturation. Applying our bioreactor, we demonstrate that human articular chondrocytes encapsulated in hydrogels composed of gelatin methacryloyl (GelMA) and hyaluronic acid methacrylate (HAMA) respond to uni- and biaxial mechanical stimulation by upregulation of hyaline cartilage-specific marker genes. We further demonstrate that intermittent biaxial mechanostimulation enhances accumulation of hyaline cartilage-specific extracellular matrix. Our study underlines the stimulatory effects of mechanical loading on the biosynthetic activity of human chondrocytes in engineered constructs and the need for easy-to-use, automated bioreactor systems in cartilage tissue engineering.

Event Abstract Back to Event Biological response of human articular chondrocytes to shear loading following changes to hydrogel surface properties Christoph Meinert1, Karsten Schrobback1 and Travis Klein1 1 Queensland University of Technology, Institute of Health and Biomedical Innovation, Australia Introduction: Articular cartilage provides a nearly frictionless surface with remarkable capacity to bear and distribute loads in a synovial joint. Alterations to the articular surface may however lead to pathological loads and unbalanced metabolism, ultimately leading to the development of osteoarthritis. Here, we established a hydrogel-based cartilage model with tailorable friction coefficients and evaluated the response of human chondrocytes in these models to dynamic shear loading imparted through custom bioreactor components. Materials and Methods: Bilayered hydrogels, with a thin cell free layer and a 2 mm alginate methacrylate (ALMA) layer containing 10^7 human articular chondrocytes (3 donors, with ethical approval, Passage 2) per mL, were photocrosslinked in the presence of Irgacure 2959. The cell-free layer consisted of either ALMA or PEG diacrylate with either 40 or 80 mol % 4-styrene sulfonic acid (PEG-40S, PEG-80S), resulting in different charge densities, as verified by EPIC-uCT. Friction coefficients were assessed over a range of velocities using custom components on an Instron Microtester. Bulk compressive modulus, swelling ratio, and water content were also measured. Further, microscopic images taken during dynamic shear loading in a custom device were used to generate strain maps using digital image correlation. Constructs were cultured in chondrogenic medium for 21 days free-swelling, followed by 11 days with 0 or 1 mm shear loading (1 h/d, 1 Hz) using custom bioreactor components. Chondrocyte response was assessed by quantitative real-time polymerase chain reaction (qRT-PCR), and matrix accumulation was assessed by immunofluorescence and biochemical assays. Results and Discussion: Constructs were able to effectively model the frictional properties of healthy, damaged, and osteoarthritic cartilage, while other physical characteristics such as compressive moduli, mass swelling ratio, and water content were not affected (Figure 1). Dynamic shear stimulation of constructs with low surface friction significantly promoted chondrogenesis and extracellular matrix synthesis as assessed by gene expression, immunofluorescence, and biochemical analysis (Figure 2). In contrast, shear stimulation of constructs with high surface friction inhibited chondrogenesis to a great extent, but induced transcription of matrix metalloproteinases involved in the degradation of cartilage extracellular matrix in osteoarthritis. Shear strains during dynamic loading were higher in the high-friction constructs than low-friction constructs, which likely explains the differences in chondrocyte response. Conclusion: This study demonstrates that surface friction may act as a key regulator of chondrocyte homeostasis by governing the magnitude of shear deformation during dynamic loading. Australian Research Council; Peter Levett, Cameron Lutton, Robert Sah, Carly Sutton Keywords: Biomimetic, biomaterial, surface property, stimuli-response Conference: 10th World Biomaterials Congress, Montréal, Canada, 17 May - 22 May, 2016. Presentation Type: New Frontier Oral Topic: Biomimetic materials Citation: Meinert C, Schrobback K and Klein T (2016). Biological response of human articular chondrocytes to shear loading following changes to hydrogel surface properties. Front. Bioeng. Biotechnol. Conference Abstract: 10th World Biomaterials Congress. doi: 10.3389/conf.FBIOE.2016.01.00873 Copyright: The abstracts in this collection have not been subject to any Frontiers peer review or checks, and are not endorsed by Frontiers. They are made available through the Frontiers publishing platform as a service to conference organizers and presenters. The copyright in the individual abstracts is owned by the author of each abstract or his/her employer unless otherwise stated. Each abstract, as well as the collection of abstracts, are published under a Creative Commons CC-BY 4.0 (attribution) licence (https://creativecommons.org/licenses/by/4.0/) and may thus be reproduced, translated, adapted and be the subject of derivative works provided the authors and Frontiers are attributed. For Frontiers’ terms and conditions please see https://www.frontiersin.org/legal/terms-and-conditions. Received: 27 Mar 2016; Published Online: 30 Mar 2016. Login Required This action requires you to be registered with Frontiers and logged in. To register or login click here. Abstract Info Abstract The Authors in Frontiers Christoph Meinert Karsten Schrobback Travis Klein Google Christoph Meinert Karsten Schrobback Travis Klein Google Scholar Christoph Meinert Karsten Schrobback Travis Klein PubMed Christoph Meinert Karsten Schrobback Travis Klein Related Article in Frontiers Google Scholar PubMed Abstract Close Back to top Javascript is disabled. Please enable Javascript in your browser settings in order to see all the content on this page.

Appropriate selection of scaffold architecture is a key challenge in cartilage tissue engineering. Gap junction-mediated intercellular contacts play important roles in precartilage condensation of mesenchymal cells. However, scaffold architecture could potentially restrict cell-cell communication and differentiation. This is particularly important when choosing the appropriate culture platform as well as scaffold-based strategy for clinical translation, that is, hydrogel or microtissues, for investigating differentiation of chondroprogenitor cells in cartilage tissue engineering. We, therefore, studied the influence of gap junction-mediated cell-cell communication on chondrogenesis of bone marrow-derived mesenchymal stromal cells (BM-MSCs) and articular chondrocytes. Expanded human chondrocytes and BM-MSCs were either (re-) differentiated in micromass cell pellets or encapsulated as isolated cells in alginate hydrogels. Samples were treated with and without the gap junction inhibitor 18-α glycyrrhetinic acid (18αGCA). DNA and glycosaminoglycan (GAG) content and gene expression levels (collagen I/II/X, aggrecan, and connexin 43) were quantified at various time points. Protein localization was determined using immunofluorescence, and adenosine-5'-triphosphate (ATP) was measured in conditioned media. While GAG/DNA was higher in alginate compared with pellets for chondrocytes, there were no differences in chondrogenic gene expression between culture models. Gap junction blocking reduced collagen II and extracellular ATP in all chondrocyte cultures and in BM-MSC hydrogels. However, differentiation capacity was not abolished completely by 18αGCA. Connexin 43 levels were high throughout chondrocyte cultures and peaked only later during BM-MSC differentiation, consistent with the delayed response of BM-MSCs to 18αGCA. Alginate hydrogels and microtissues are equally suited culture platforms for the chondrogenic (re-)differentiation of expanded human articular chondrocytes and BM-MSCs. Therefore, reducing direct cell-cell contacts does not affect in vitro chondrogenesis. However, blocking gap junctions compromises cell differentiation, pointing to a prominent role for hemichannel function in this process. Therefore, scaffold design strategies that promote an increasing distance between single chondroprogenitor cells do not restrict their differentiation potential in tissue-engineered constructs.

Photocrosslinkable hydrogels are frequently used in cartilage tissue engineering, with crosslinking systems relying on cytotoxic photoinitiators and ultraviolet (UV) light to form permanent hydrogels. These systems are rarely assessed in terms of optimization of photoinitiator or UV dosage, with non-cytotoxic concentrations from literature deemed sufficient. We hypothesized that the number of reactive functional groups present within a hydrogel polymer is highly relevant when crosslinking, affording cytoprotection to chondrocytes by preferentially interacting with the highly reactive radicals that are formed during UV-mediated activation of a photoinitiator. This was tested using two photocrosslinkable hydrogel systems: gelatin methacrylamide (GelMA) and gellan gum methacrylate (GGMA). We further assessed the effects of two different UV dosages on chondrocyte differentiation while subject to a single photoinitiator dosage in the GGMA system. Most notably, we found that a higher ratio of reactive groups to photoinitiator molecules offers cytoprotective effects, and future developments in photocrosslinkable hydrogel technology may involve assessment of such ratios. In contrast, we found there to be no effect of UV on chondrocyte differentiation at the two chosen dosages. Overall the optimization of photocrosslinkable systems is of great value in cartilage tissue engineering and these data provide a groundwork for such concepts to be developed further.Statement of SignificancePhotocrosslinkable hydrogels, which use photoinitiators and predominantly ultraviolet light to form stable matrices for cell encapsulation and tissue development, are promising for cartilage tissue engineering. While both photoinitiators and ultraviolet light can damage cells, these systems have generally not been optimized. We propose that the ratio of reactive functional groups within a polymer to photoinitiator molecules is a critical parameter for optimization of photocrosslinkable hydrogels. Using photocrosslinkable gelatin and gellan gum, we found that a higher ratio of reactive groups to photoinitiator molecules protected chondrocytes, but did not affect chondrocyte differentiation. The principle of cytoprotection by functional groups developed in this work will be of great value in optimizing photocrosslinkable hydrogel systems for cartilage and other tissue engineering applications. (C) 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

The development of hydrogels tailored for cartilage tissue engineering has been a research and clinical goal for over a decade. Directing cells towards a chondrogenic phenotype and promoting new matrix formation are significant challenges that must be overcome for the successful application of hydrogels in cartilage tissue therapies. Gelatin–methacrylamide (Gel-MA) hydrogels have shown promise for the repair of some tissues, but have not been extensively investigated for cartilage tissue engineering. We encapsulated human chondrocytes in Gel-MA-based hydrogels, and show that with the incorporation of small quantities of photocrosslinkable hyaluronic acid methacrylate (HA-MA), and to a lesser extent chondroitin sulfate methacrylate (CS-MA), chondrogenesis and mechanical properties can be enhanced. The addition of HA-MA to Gel-MA constructs resulted in more rounded cell morphologies, enhanced chondrogenesis as assessed by gene expression and immunofluorescence, and increased quantity and distribution of the newly synthesized extracellular matrix (ECM) throughout the construct. Consequently, while the compressive moduli of control Gel-MA constructs increased by 26 kPa after 8 weeks culture, constructs with HA-MA and CS-MA increased by 114 kPa. The enhanced chondrogenic differentiation, distribution of ECM, and improved mechanical properties make these materials potential candidates for cartilage tissue engineering applications.

Hydrogels are promising materials for cartilage repair, but the properties required for optimal functional outcomes are not yet known. In this study, we functionalized four materials that are commonly used in cartilage tissue engineering and evaluated them using in vitro cultures. Gelatin, hyaluronic acid, polyethylene glycol, and alginate were functionalized with methacrylic anhydride to make them photocrosslinkable. We found that the responses of encapsulated human chondrocytes were highly dependent on hydrogel type. Gelatin hydrogels supported cell proliferation and the deposition of a glycosaminoglycan rich matrix with significant mechanical functionality. However, cells had a dedifferentiated phenotype, with high expression of collagen type I. Chondrocytes showed the best redifferentiation in hyaluronic acid hydrogels, but the newly formed matrix was highly localized to the pericellular regions, and these gels degraded rapidly. Polyethylene glycol hydrogels, as a bioinert control, did not promote any strong responses. Alginate hydrogels did not support the deposition of new matrix, and the stiffness decreased during culture. The markedly different response of chondrocytes to these four photocrosslinkable hydrogels demonstrates the importance of material properties for chondrogenesis and extracellular matrix production, which are critical for effective cartilage repair.

OBJECTIVE:One of the pathologic changes that occurs during osteoarthritis (OA) is the degeneration of the pericellular matrix (PCM). Since the PCM is likely to be involved in mechanotransduction, this study was undertaken to investigate the effects of PCM-like matrix accumulation in zonal OA chondrocytes and their influence on chondrocyte response to compression.METHODS:Superficial and middle/deep zone chondrocytes from macroscopically normal cartilage of OA knees were expanded and encapsulated in alginate gels. The effects of compression (short-term or long-term) and preculture on chondrocyte expression of various matrix molecules, cytokines, and matrix metalloproteinases (MMPs) were assessed. Additionally, nonexpanded chondrocytes were encapsulated in alginate and cultured in the presence or absence of transforming growth factor β1 (TGFβ1) and dexamethasone and analyzed following short-term compression experiments.RESULTS:Expanded OA chondrocytes (superficial and middle/deep zone) that were precultured for 2 weeks under free-swelling conditions prior to dynamic compression responded more sensitively to loading and had increased matrix accumulation, increased interleukin-1β (IL-1β) and IL-4 levels, and decreased levels of MMP-2 (in the middle/deep zone) compared to the nonloaded controls. Compression also decreased MMP-3 and MMP-13 levels even without preculture. Nonexpanded chondrocytes did not respond to compression, but differences in gene expression were found depending on the zone of harvest, time in culture, and medium composition.CONCLUSION:Our findings demonstrate that with predeposited PCM-like matrix, compressive stimulation can enhance matrix protein accumulation in expanded OA chondrocytes. Investigations into how PCM or other matrix components differentially affect this balance under mechanical loading may provide invaluable insight into OA pathogenesis and the use of expanded cells in tissue engineering and regenerative medicine-based applications.