Milk contains high concentrations of amyloidogenic casein proteins and is supersaturated with respect to crystalline calcium phosphates such as apatite. Nevertheless, the mammary gland normally remains unmineralized and free of amyloid. Unlike κ-casein, β- and αs-caseins are highly effective mineral chaperones that prevent ectopic and pathological calcification of the mammary gland. Milk invariably contains a mixture of two to five different caseins that act on each other as molecular chaperones. Instead of forming amyloid fibrils, several thousand caseins and hundreds of nanoclusters of amorphous calcium phosphate combine to form fuzzy complexes called casein micelles. To understand the biological functions of the casein micelle its structure needs to be understood better than at present. The location in micelles of the highly amyloidogenic κ-casein is disputed. In traditional hydrophobic colloid models, it, alone, forms a stabilizing surface coat that also determines the average size of the micelles. In the recent multivalent-binding model, κ-casein is present throughout the micelle, in intimate contact with the other caseins. To discriminate between these models, a range of biomimetic micelles was prepared using a fixed concentration of the mineral chaperone β-casein and nanoclusters of calcium phosphate, with variable concentrations of κ-casein. A biomimetic micelle was also prepared using a highly deuterated and in vivo phosphorylated recombinant β-casein with calcium phosphate and unlabelled κ-casein. Neutron and X-ray scattering experiments revealed that κ-casein is distributed throughout the micelle, in quantitative agreement with the multivalent-binding model but contrary to the hydrophobic colloid models.

The RIP homotypic interaction motif (RHIM) is an essential protein motif in inflammatory signaling and certain cell death pathways. RHIM signaling occurs following the assembly of functional amyloids, and while the structural biology of such higher-order RHIM complexes has started to emerge, the conformations and dynamics of nonassembled RHIMs remain unknown. Here, using solution NMR spectroscopy, we report the characterization of the monomeric form of the RHIM in receptor-interacting protein kinase 3 (RIPK3), a fundamental protein in human immunity. Our results establish that the RHIM of RIPK3 is an intrinsically disordered protein motif, contrary to prediction, and that exchange dynamics between free monomers and amyloid-bound RIPK3 monomers involve a 20-residue stretch outside the RHIM that is not incorporated within the structured cores of the RIPK3 assemblies determined by cryo-EM or solid-state NMR. Thus, our findings expand on the structural characterization of RHIM-containing proteins, specifically highlighting conformational dynamics involved in assembly processes.

Group A Streptococcus (GAS) is a strict human pathogen possessing a unique pathogenic trait that utilizes the cooperative activity of NAD+-glycohydrolase (NADase) and Streptolysin O (SLO) to enhance its virulence. How NADase interacts with SLO to synergistically promote GAS cytotoxicity and intracellular survival is a long-standing question. Here, the structure and dynamic nature of the NADase/SLO complex are elucidated by X-ray crystallography and small-angle scattering, illustrating atomic details of the complex interface and functionally relevant conformations. Structure-guided studies reveal a salt-bridge interaction between NADase and SLO is important to cytotoxicity and resistance to phagocytic killing during GAS infection. Furthermore, the biological significance of the NADase/SLO complex in GAS virulence is demonstrated in a murine infection model. Overall, this work delivers the structure-functional relationship of the NADase/SLO complex and pinpoints the key interacting residues that are central to the coordinated actions of NADase and SLO in the pathogenesis of GAS infection.

We recently characterised the structure of the complex of NAD + -glycohydrolase (NADase) and Streptolysin O (SLO) from Group A Streptococcus (GAS), using X-ray crystallography to determine atomic coordinates, small-angle scattering to investigate solution dynamics in the complex, and mutagenesis, cell-culture and animal studies to validate key structural observations [1]. GAS is a clinically significant human pathogen renowned for its highly aggressive destruction of host tissues[2].It exploits the cooperative activity of NADase and SLO to enhance its virulence and achieve infection [3].However, the details of the synergistic interaction that promotes the cytotoxicity and intracellular survival of GAS have been elusive.The modelled results of the crystallography and small angle scattering, shown in Figure 1, indicate multiple modes of interaction, and low resolution characterisation of the flexible regions not present in the crystallised constructs.Structure-guided studies show an electrostatic interaction between NADase and SLO is crucial for cytotoxicity and resistance to phagocytic killing during GAS infection.We demonstrate that the complex formation between NADase and SLO is critical for GAS virulence by a murine infection model.Our work deciphers the atomic details of the NADase-SLO interaction and pinpoints the key residues that are crucial for the coordinated actions of NADase and SLO in the pathogenesis of GAS infection.The structural information we presented may open up a prospect for the design of alternative agents aiming to disturb the NADase-SLO interaction to suppress GAS virulence.Figure 1.Multistate models of NADase and the NADase/SLO complex

Small angle neutron scattering is a powerful complementary technique in structural biology. It generally requires, or benefits from, deuteration to achieve its unique potentials. Molecular deuteration has become a mature expertise, with deuteration facilities located worldwide to support access to the technique for a wide breadth of structural biology and life sciences. The sorts of problems well answered by small angle scattering and deuteration involve large (>10Å) scale flexible movements, and this approach is best used where high-resolution methods (crystallography, NMR, cryo-EM) leave questions unanswered. This chapter introduces deuteration, reviewing biological deuteration of proteins, lipids and sterols, and then steps through the ever-expanding range of deuterated molecules being produced by chemical synthesis and enabling sophisticated experiments using physiologically relevant lipids. Case studies of recent successful use of deuteration may provide illustrative examples for strategies for future experiments. We discuss issues of nomenclature for synthesised molecules of novel labeling and make recommendations for their naming. We reflect on our experiences, with cost associated with achieving an arbitrary deuteration level, and on the benefits of experimental co-design by user scientist, deuteration scientist, and neutron scattering scientist working together. Although methods for biological and chemical deuteration are published in the public domain, we recommend that the best method to deuterate is to engage with a deuteration facility.

Disulfide-bond-forming proteins (Dsbs) play a crucial role in the pathogenicity of many Gram-negative bacteria. Disulfide-bond-forming protein A (DsbA) catalyzes the formation of the disulfide bonds necessary for the activity and stability of multiple substrate proteins, including many virulence factors. Hence, DsbA is an attractive target for the development of new drugs to combat bacterial infections. Here, two fragments, bromophenoxy propanamide (1) and 4-methoxy-N-phenylbenzenesulfonamide (2), were identified that bind to DsbA from the pathogenic bacterium Burkholderia pseudomallei, the causative agent of melioidosis. The crystal structures of oxidized B. pseudomallei DsbA (termed BpsDsbA) co-crystallized with 1 or 2 show that both fragments bind to a hydrophobic pocket that is formed by a change in the side-chain orientation of Tyr110. This conformational change opens a 'cryptic' pocket that is not evident in the apoprotein structure. This binding location was supported by 2D-NMR studies, which identified a chemical shift perturbation of the Tyr110 backbone amide resonance of more than 0.05 p.p.m. upon the addition of 2 mM fragment 1 and of more than 0.04 p.p.m. upon the addition of 1 mM fragment 2. Although binding was detected by both X-ray crystallography and NMR, the binding affinity (K-d) for both fragments was low (above 2 mM), suggesting weak interactions with BpsDsbA. This conclusion is also supported by the crystal structure models, which ascribe partial occupancy to the ligands in the cryptic binding pocket. Small fragments such as 1 and 2 are not expected to have a high energetic binding affinity due to their relatively small surface area and the few functional groups that are available for intermolecular interactions. However, their simplicity makes them ideal for functionalization and optimization. The identification of the binding sites of 1 and 2 to BpsDsbA could provide a starting point for the development of more potent novel antimicrobial compounds that target DsbA and bacterial virulence.

Necroptosis is a lytic programmed cell death pathway with origins in innate immunity that is frequently dysregulated in inflammatory diseases. The terminal effector of the pathway, MLKL, is licensed to kill following phosphorylation of its pseudokinase domain by the upstream regulator, RIPK3 kinase. Phosphorylation provokes the unleashing of MLKL's N-terminal four-helix bundle (4HB or HeLo) domain, which binds and permeabilizes the plasma membrane to cause cell death. The precise mechanism by which the 4HB domain permeabilizes membranes, and how the mechanism differs between species, remains unclear. Here, we identify the membrane binding epitope of mouse MLKL using NMR spectroscopy. Using liposome permeabilization and cell death assays, we validate K69 in the α3 helix, W108 in the α4 helix, and R137/Q138 in the first brace helix as crucial residues for necroptotic signaling. This epitope differs from the phospholipid binding site reported for human MLKL, which comprises basic residues primarily located in the α1 and α2 helices. In further contrast to human and plant MLKL orthologs, in which the α3-α4 loop forms a helix, this loop is unstructured in mouse MLKL in solution. Together, these findings illustrate the versatility of the 4HB domain fold, whose lytic function can be mediated by distinct epitopes in different orthologs.

The presence of suitable cavities or pockets on protein structures is a general criterion for a therapeutic target protein to be classified as ‘druggable’. Many disease-related proteins that function solely through protein–protein interactions lack such pockets, making development of inhibitors by traditional small-molecule structure-based design methods much more challenging. The 22 kDa bacterial thiol oxidoreductase enzyme, DsbA, from the gram-negative bacterium Burkholderia pseudomallei (BpsDsbA) is an example of one such target. The crystal structure of oxidized BpsDsbA lacks well-defined surface pockets. BpsDsbA is required for the correct folding of numerous virulence factors in B. pseudomallei, and genetic deletion of dsbA significantly attenuates B. pseudomallei virulence in murine infection models. Therefore, BpsDsbA is potentially an attractive drug target. Herein we report the identification of a small molecule binding site adjacent to the catalytic site of oxidized BpsDsbA. 1HN CPMG relaxation dispersion NMR measurements suggest that the binding site is formed transiently through protein dynamics. Using fragment-based screening, we identified a small molecule that binds at this site with an estimated affinity of KD ~ 500 µM. This fragment inhibits BpsDsbA enzymatic activity in vitro. The binding mode of this molecule has been characterized by NMR data-driven docking using HADDOCK. These data provide a starting point towards the design of more potent small molecule inhibitors of BpsDsbA.

Transient interactions in which binding partners retain substantial conformational disorder play an essential role in regulating biological networks, challenging the expectation that specificity demands structurally defined and unambiguous molecular interactions. The monoclonal antibody 6D8 recognises a completely conserved continuous nine-residue epitope within the intrinsically disordered malaria antigen, MSP2, yet it has different affinities for the two allelic forms of this antigen. NMR chemical shift perturbations, relaxation rates and paramagnetic relaxation enhancements reveal the presence of transient interactions involving polymorphic residues immediately C-terminal to the structurally defined epitope. A combination of these experimental data with molecular dynamics simulations shows clearly that the polymorphic C-terminal extension engages in multiple transient interactions distributed across much of the accessible antibody surface. These interactions are determined more by topographical features of the antibody surface than by sequence-specific interactions. Thus, specificity arises as a consequence of subtle differences in what are highly dynamic and essentially non-specific interactions.

Merozoite surface protein 2 (MSP2) is an intrinsically disordered antigen that is abundant on the surface of the malaria parasite Plasmodium falciparum. The two allelic families of MSP2, 3D7 and FC27, differ in their central variable regions, which are flanked by highly conserved C-terminal and N-terminal regions. In a vaccine trial, full-length 3D7 MSP2 induced a strain-specific protective immune response despite the detectable presence of conserved region antibodies. This work focuses on the conserved C-terminal region of MSP2, which includes the only disulphide bond in the protein and encompasses key epitopes recognised by the mouse monoclonal antibodies 4D11 and 9H4. Although the 4D11 and 9H4 epitopes are overlapping, immunofluorescence assays have shown that the mouse monoclonal antibody 4D11 binds to MSP2 on the merozoite surface with a much stronger signal than 9H4. Understanding the structural basis for this antigenic difference between these antibodies will help direct the design of a broad-spectrum and MSP2-based malaria vaccine. 4D11 and 9H4 were reengineered into antibody fragments [variable region fragment (Fv) and single-chain Fv (scFv)] and were validated as suitable models for their full-sized IgG counterparts by surface plasmon resonance and isothermal titration calorimetry. An alanine scan of the 13-residue epitope 3D7-MSP2207–222 identified the minimal binding epitope of 4D11 and the key residues involved in binding. A 2.2-Å crystal structure of 4D11 Fv bound to the eight-residue epitope NKENCGAA provided valuable insight into the possible conformation of the C-terminal region of MSP2 on the parasite. This work underpins continued efforts to optimise recombinant MSP2 constructs for evaluation as potential vaccine candidates.

We have developed a method that has proven highly reliable for the deuteration and triple labeling ((2)H/(15)N/(13)C) of a broad range of proteins by recombinant expression in Escherichia coli BL21. Typical biomass yields are 40-80g/L wet weight, yielding 50-500mg/L purified protein. This method uses a simple, relatively inexpensive defined medium, and routinely results in a high-yield expression without need for optimization. The key elements are very tight control of expression, careful starter culture adaptation steps, media composition, and strict maintenance of aerobic conditions ensuring exponential growth. Temperature is reduced as required to prevent biological oxygen demand exceeding maximum aeration capacity. Glycerol is the sole carbon source. We have not encountered an upper limit for the size of proteins that can be expressed, achieving excellent expression for proteins from 11 to 154kDa and the quantity produced at 1L scale ensures that no small-angle neutron scattering, nuclear magnetic resonance, or neutron crystallography experiment is limited by the amount of deuterated material. Where difficulties remain, these tend to be cases of altered protein solubility due to high protein concentration and a D2O-based environment.

We have developed a method that has proven highly reliable for the deuteration and triple labeling (H-2/N-15/C-13) of a broad range of proteins by recombinant expression in Escherichia coli BL21. Typical biomass yields are 40-80 g/L wet weight, yielding 50-500 mg/L purified protein. This method uses a simple, relatively inexpensive defined medium, and routinely results in a high-yield expression without need for optimization. The key elements are very tight control of expression, careful starter culture adaptation steps, media composition, and strict maintenance of aerobic conditions ensuring exponential growth. Temperature is reduced as required to prevent biological oxygen demand exceeding maximum aeration capacity. Glycerol is the sole carbon source. We have not encountered an upper limit for the size of proteins that can be expressed, achieving excellent expression for proteins from 11 to 154 kDa and the quantity produced at 1 L scale ensures that no small-angle neutron scattering, nuclear magnetic resonance, or neutron crystallography experiment is limited by the amount of deuterated material. Where difficulties remain, these tend to be cases of altered protein solubility due to high protein concentration and a D2O-based environment.

We have developed a method that has proven highly reliable for the deuteration and triple labeling ((2)H/(15)N/(13)C) of a broad range of proteins by recombinant expression in Escherichia coli BL21. Typical biomass yields are 40-80g/L wet weight, yielding 50-500mg/L purified protein. This method uses a simple, relatively inexpensive defined medium, and routinely results in a high-yield expression without need for optimization. The key elements are very tight control of expression, careful starter culture adaptation steps, media composition, and strict maintenance of aerobic conditions ensuring exponential growth. Temperature is reduced as required to prevent biological oxygen demand exceeding maximum aeration capacity. Glycerol is the sole carbon source. We have not encountered an upper limit for the size of proteins that can be expressed, achieving excellent expression for proteins from 11 to 154kDa and the quantity produced at 1L scale ensures that no small-angle neutron scattering, nuclear magnetic resonance, or neutron crystallography experiment is limited by the amount of deuterated material. Where difficulties remain, these tend to be cases of altered protein solubility due to high protein concentration and a D2O-based environment.

GrEASy fibrils: Hydrophobins are fungal proteins that assemble into an amphipathic fibrillar monolayer with amyloid properties and a hydrophobic face as water-resistant as Teflon. Solid-state NMR studies on EAS hydrophobin fibrils reveal direct evidence of a partial molecular rearrangement on assembly and an ordered β-sheet-rich core in the context of a whole protein in this functional amyloid.

Wasserabweisend: Hydrophobine sind Proteine aus Pilzen, die amphipathische fibrilläre Monolagen mit amyloiden Eigenschaften und einer hydrophoben Seite so wasserabweisend wie Teflon bilden. Festkörper-NMR-Studien an EAS-Hydrophobin-Fibrillen belegen für die Amyloidbildung im Kontext des gesamten funktionellen Amyloids eine partielle molekulare Reorganisation und einen geordneten, β-Faltblatt-reichen Kern. Detailed facts of importance to specialist readers are published as ”Supporting Information”. Such documents are peer-reviewed, but not copy-edited or typeset. They are made available as submitted by the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

Structural studies of biological macromolecules often require deuterated proteins, necessitating an effective bioprocessing strategy for high yield deuteration and purification. The fermentation and bioseparation studies reported here concern deuterated human protein galectin-2 mutant C57M (hGal-2), a protein showing potential for therapeutic applications. Using the vector pET-28a and a defined D2O based minimal medium with glycerol as the sole carbon source and kanamycin for selection, we have demonstrated that a high density of Escherichia coli expressing deuterated protein at a bench bioreactor scale (7L) can be achieved, with due attention to prevention of oxygen limitation. Yields achieved were 58g/L biomass (wet weight) containing 0.7g/L hGal-2. Affinity chromatography and ion-exchange chromatography were combined to achieve high purity as well as removal of hGal-2 aggregates, giving an overall yield of 1200mg deuterated hGal-2. The deuterated hGal-2 was characterized and compared with the non-deuterated protein by size exclusion chromatography (SEC), HPLC, N-terminal sequencing, mass spectrometry (MS) and a dot blot immunoassay, showing that deuteration and subsequent purification did not impact the lactose binding and antibody recognition abilities of hGal-2. MS for both intact and trypsin-digested hGal-2 demonstrated that the extent of labeling of non-exchangeable hydrogen atoms by deuterium was (66±1)%, which provides sufficient contrast variation for structural studies using small angle neutron scattering. The fermentation and bioseparation method established in this work can be applied to process other deuterated proteins with high yield and purity, opening the way to advanced structural studies.

The cultivation of microorganisms on deuterated substrates has allowed us to control deuterium incorporation into biopolymer systems which is important for characterisation using neutron scattering techniques. Bacterial polyhydroxyoctanoate (PHO) is a polyester formed within inclusions inside bacterial cells and was deuterated in vivo under various conditions to characterise the formation of these inclusions by neutron scattering. Manipulation of deuterated media during microbial growth and PHO production phases resulted in polymer with partial or complete substitution of hydrogen by deuterium, as shown by gas chromatography. Sequential feeding of hydrogenated and deuterated forms of the same precursor was used to demonstrate that neutron scattering analysis could be used to differentiate between chemically similar phases in these polymer inclusions.

The valence electronic structure of the S-layer of Lactobacillus brevis is determined using synchrotron-based photoelectron spectroscopy and soft X-ray absorption spectroscopy. Spectra are compared to experimental work on amino-acids and S-layers of Bacillus sphaericus. While it is indeed possible to identify energy levels with those of natural amino-acids, distinct energy shifts are indeed observed which cannot be reconciled using such simple comparisons. Furthermore a strong nitrogen signal observed in both the occupied and unoccupied energy levels suggests that the Lactobacillus brevis protein is amine-terminated. A discussion of the surface of this protein is given.

Copper and zinc toxicity to the freshwater alga Chlorella sp. was determined at a range of pH values (5.5–8.0) in a synthetic softwater (hardness 40–48 mg CaCO3/L). The effects of the metals on algal growth (cell division) rate were determined after 48-h exposure at pH 5.5, 6.0, 6.5, 7.0, 7.5, and 8.0. The toxicity of both metals was pH dependent. As pH decreased from 8.0 to 5.5, the copper concentration required to inhibit the algal growth rate by 50% (IC50) increased from 1.0 to 19 μg/L. For zinc, the IC50 increased from 52 to 2700 μg/L over the same pH range. Changes in solution speciation alone did not explain the increased toxicity observed as the pH increased. Modelled Cu2+ and Zn2+ concentrations decreased with increasing pH, whereas toxicity was observed to increase. Measurements of extracellular (cell-bound) metal concentrations support the biotic ligand model (BLM) theory of competition between protons (H+) and metals for binding sites at the algal cell surface. Higher extracellular metal concentrations were observed at high pH, indicating reduced competition. Independent of pH, both extracellular and intracellular copper were directly related to growth inhibition in Chlorella sp., whereas zinc toxicity was related to cell-bound zinc only. These findings suggest that the algal cell surface may be considered as the biotic ligand in further development of a chronic BLM with microalgae. Conditional binding constants (log K) were determined experimentally (using measured intracellular metal concentrations) and theoretically (using concentration-response curves) for copper and zinc for Chlorella sp. at selected pH values. Excellent agreement was found indicating the possibility of using concentration-response data to estimate conditional metal-cell binding constants.

Under growth-limiting conditions, many bacteria are able to metabolise excess organic acids into polyhydroxyalkanoates (PHA) and store these polymers as intracellular inclusions until the return of favourable conditions. Various models have been proposed for the macromolecular organisation of the boundary layer surrounding the polymer, and contrast-variation small-angle neutron scattering (SANS) was used to study its organisation. Inclusions formed by Pseudomonas oleovorans under hydrogenating conditions showed lowest scattering intensity at ca. 20% D2O. The inclusions consist of protein and membrane lipids in the boundary layer and polyhydroxyoctanoate (lipid) in the inclusion body. At 20% D2O the contributions of lipids were contrast matched with the solvent, indicating that lipids contributed the bulk of the scattering intensity observed at other D2O/H2O ratios. These results are inconsistent with a model of the boundary layer which proposed outer and inner layers of crystalline protein lattice sandwiching a membrane lipid membrane layer [E.S. Stuart, R.W. Lenz, R.C. Fuller, Can J Microbiol 41(Suppl 1) (1995) 84–93], and is more consistent with a model consisting of a lipid monolayer containing embedded proteins [U. Pieper-furst, M.H. Madkour, F. Mayer, A. Steinbuchel, J. Bacteriol. 176 (1994) 4328–4337.] By altering the H/D content of the precursors, we were able to collect SANS data from preparations of both deuterated and H/D copolymer inclusions, where initial PHA produced was hydrogenated followed by deuteration. Deuterated inclusions showed minimum intensity above 90% D2O/H2O whereas the sequentially produced copolymer (assumed to be in a core/shell arrangement) displayed minimum scattering some 20% lower, which is consistent with the increased hydrogenation of the boundary layer expected from its synthesis during supply of hydrogenated followed by deuterated precursors.