The iodide-bridged dimeric palladium complex [NnBu4]2[Pd2I6] was synthesized and characterized using various physiochemical analyses, including elemental and thermal analysis, UV-Vis, FTIR, and NMR spectroscopy. The antibacterial activity of the compound was evaluated using the disk diffusion method against a panel of bacteria, demonstrating broad-spectrum effectiveness against two Gram-positive bacteria (Bacillus cereus & Bacillus subtilis) and four Gram-negative bacteria (Salmonella typhimurium, Escherichia coli, Klebsiella aerogenes & Klebsiella pneumoniae). Molecular docking studies revealed a calculated binding energy score of -9.90 kcal/mol against the Thymidylate Kinase (TMK) protein, suggesting potential interaction and affinity. Physicochemical parameters, as the Swiss ADME web server predicted, indicated limited permeability across the blood-brain barrier and no gastrointestinal absorption. The Lipinski and Egan models predicted favorable drug-like characteristics for [NnBu4]2[Pd2I6]. [NnBu4]2[Pd2I6] was classified as Toxicity Class 3 for acute oral toxicity, with an LD50 value of 189 mg/kg. Predictive modeling using the ProTox-III web server yielded an average similarity of 88% and prediction accuracy of 71%. In conclusion, the obtained biological data suggest that [NnBu4]2[Pd2I6] could be a promising candidate for future development as an antibacterial agent.

Three-way catalysts (TWCs) are widely used in vehicles to convert the exhaust emissions from internal combustion engines into less toxic pollutants. After around 8–10 years of use, the declining catalytic activity of TWCs causes them to need replacing, leading to the generation of substantial amounts of spent TWC material containing precious metals, including palladium. It has previously been reported that [NnBu4]2[Pd2I6] is obtained in high yield and purity from model TWC material using a simple, inexpensive and mild reaction based on tetrabutylammonium iodide in the presence of iodine. In this contribution, it is shown that, through a simple ligand exchange reaction, this dimeric recovery complex can be converted into PdI2(dppf) (dppf = 1,1′-bis(diphenylphosphino)ferrocene), which is a direct analogue of a commonly used catalyst, PdCl2(dppf). [NnBu4]2[Pd2I6] displayed high catalytic activity in the oxidative functionalisation of benzo[h]quinoline to 10-alkoxybenzo[h]quinoline and 8-methylquinoline to 8-(methoxymethyl)quinoline in the presence of an oxidant, PhI(OAc)2. Near-quantitative conversions to the desired product were obtained using a catalyst recovered from waste under milder conditions (50 °C, 1–2 mol% Pd loading) and shorter reaction times (2 h) than those typically used in the literature. The [NnBu4]2[Pd2I6] catalyst could also be recovered and re-used multiple times after the reaction, providing additional sustainability benefits. Both [NnBu4]2[Pd2I6] and PdI2(dppf) were also found to be active in Buchwald–Hartwig amination reactions, and their performance was optimised through a Design of Experiments (DoE) study. The optimised conditions for this waste-derived palladium catalyst (1–2 mol% Pd loading, 3–6 mol% of dppf) in a bioderived solvent, cyclopentyl methyl ether (CPME), offer a more sustainable approach to C-N bond formation than comparable amination protocols.

Herein we report the synthesis and characterization of electro-conductive chitosan–gelatin–agar (Cs-Gel-Agar) based PEDOT: PSS hydrogels for tissue engineering. Cs-Gel-Agar porous hydrogels with 0–2.0% (v/v) PEDOT: PSS were fabricated using a thermal reverse casting method where low melting agarose served as the pore template. Sample characterizations were performed by means of scanning electron microscopy (SEM), attenuated total reflectance–Fourier transform infrared spectroscopy (ATR–FTIR), X-ray diffraction analysis (XRD) and electrochemical impedance spectroscopy (EIS). Our results showed enhanced electrical conductivity of the cs-gel-agar hydrogels when mixed with DMSO-doped PEDOT: PSS wherein the optimum mixing ratio was observed at 1% (v/v) with a conductivity value of 3.35 × 10−4 S cm−1. However, increasing the PEDOT: PSS content up to 1.5 % (v/v) resulted in reduced conductivity to 3.28 × 10−4 S cm−1. We conducted in vitro stability tests on the porous hydrogels using phosphate-buffered saline (PBS) solution and investigated the hydrogels’ performances through physical observations and ATR–FTIR characterization. The present study provides promising preliminary data on the potential use of Cs-Gel-Agar-based PEDOT: PSS hydrogel for tissue engineering, and these, hence, warrant further investigation to assess their capability as biocompatible scaffolds.

Polyfunctional linkers bearing carboxylate, bipyridine and alkyne functionalities allow the stepwise construction of multimetallic assemblies incorporating redox and photophysical properties.

[PdI2(Me(2)dazdt)] is obtained from palladium powder via a 100% atom -economical Pd(0) leaching reaction using Me(2)dazdt (N,N'-dimethyl-perhydrodiazepine-2,3-dithione) and iodine. This complex is a versatile starting point for ligand exchange reactions with (di)phosphines, yielding trans-[PdI2(PPh3)(2)] and [PdI2(dppe)] (dppe = 1,2-bis-(diphenylphosphino)ethane). Further reaction with dithiocarbamates provides compounds of the form [Pd(DTC)(L)(n)](+) (DTC = dithiocarbamate; L = PPh3, n = 2; L = dppe, n = 1), which are highly active catalysts for regio- and chemoselective C H bond activation reactions. Using DTC ligands with trimethoxysilyl-terminated tethers, the palladium(II) units can be attached to the surface of core shell, silica -coated Fe3O4 nanoparticles. Once units form the catalytically active component of a recyclable, quasi -heterogeneous, Pd(II)-based catalytic system based on recovered palladium, illustrating the proposed circular model strategy. These investigations contribute to key steps in this process, such as efficient, atom-economical recovery, chemoselectivity of ligand substitution reactions, demonstration of catalytic activity, and the potential for immobilization of catalytic surface units derived from recovered metal.

The research represented here is oriented towards developing a new approach to functionalise a surface of Magnetic Nanoparticles with Polypyrrole (MNPs-PPy). This development will then applied to remove 2,4 dinitrophenol (2,4-DNP) in aqueous solution. A various analytical technique such as Fourier Transform Infrared Spectroscopy (FTIR) analysis, Scanning Electron Microscope (SEM), X-ray Diffraction (XRD) was employed for complete characterisation of MNPs-PPy. FT-IR spectra have shown the peak of Fe-O at 580 cm-1 while; the SEM images illustrated the globular structure of the surface of MNPs-PPy. Also, XRD result has shown the MNPs-PPy is in the crystalline form. The ultimate aims would then be the optimisation of the superlative condition of several parameters such as effect pH, temperature and concentration, contact time, amount of adsorbent, interfering ions and reusability for the removal of (2,4-DNP) in an aqueous solution by MNPs-PPy. The optimum conditions were observed at pH 6, 318 K, 10 ppm of analyte, 75 minutes and 50 mg of adsorbents which shown 98.67 % removal of analyte.

Molecular palladium complexes, recovered selectively from used catalytic converters, can be directly valorised as highly-active catalysts for C–H oxidative functionalisation.

The disulfide ligand (SC6H4CO2H-4)2 acts as a simple but versatile linker for a range of group 8 transition metals through reaction of the oxygen donors. This leads to a range of homobimetallic ruthenium and osmium alkenyl compounds, [{M(CH═CHR)(CO)(PPh3)2(O2CC6H4S-4)}2] (M = Ru, Os; R = C6H4Me-4). Additional metal-based functionality can be added through the use of precursors incorporating rhenium bipyridine units (R = (bpy)ReCl(CO)3). The more robust diphosphine ligands in [{Ru(dppm)2(O2CC6H4S-4)}2]2+ (dppm = diphenylphosphinomethane) allow reduction of the disulfide bond with sodium borohydride to yield the thiol complex [Ru(O2CC6H4SH-4)(dppm)2]+. This complex reacts with [AuCl(PPh3)] to afford the bimetallic compound [Ru(dppm)2(O2CC6H4S-4)Au(PPh3)]+. However, an improved route to the same and related heterobimetallic compounds is provided by the reaction of cis-[RuCl2(dppm)2] with [Au(SC6H4CO2H-4)(L)] (L = PPh3, PCy3, PMe3, IDip) in the presence of base and NH4PF6 (IDip = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene). The heterotrimetallic compound [Au(SC6H4CO2Ru(dppm)2)2]+ is accessible through the reaction of the homoleptic gold(I) dithiolate [Au(SC6H4CO2H-4)2]PPN (PPN = bis(triphenylphosphine)iminium) with cis-[RuCl2(dppm)2]. Without departure from the same methodology, greater complexity can be incorporated into the system to provide the penta- and heptametallic assemblies [(dppf){AuSC6H4CO2Ru(dppm)2}2]2+ and [(dppf){AuSC6H4CO2Os(CH═CH-bpyReCl(CO)3)(CO)(PPh3)2}2]. The same stepwise approach provides the dinuclear organometallic complexes [(L)Au(SC6H4CO2-4)M(CH═CHC6H4Me-4)(CO)(PPh3)2] (M = Ru, Os; L = PPh3, IDip). Complexes containing three metals from different groups of the periodic table [(L)Au(SC6H4CO2-4)M{CH═CH-bpyReCl(CO)3}(CO)(PPh3)2] (M = Ru, Os) can also be prepared, with one ruthenium example (L = PPh3) being structurally characterized. In order to illustrate the versatility of this approach, the synthesis and characterization (IR and NMR spectroscopy, TEM, EDS, and TGA) of the functionalized gold and palladium nanoparticles Au@[SC6H4CO2Ru(dppm)2]+ and Pd@[SC6H4CO2Ru(dppm)2]+ is reported.

The versatile rhenium complex [ReCl(CO)3(bpyC[triple bond, length as m-dash]CH)] (HC[triple bond, length as m-dash]Cbpy = 5-ethynyl-2,2'-bipyridine) is used to generate a series of bimetallic complexes through the hydrometallation of [MHCl(CO)(BTD)(PPh3)2] (M = Ru, Os; BTD = 2,1,3-benzothiadiazole). The ruthenium complex [Ru{CH[double bond, length as m-dash]CH-bpyReCl(CO)3}Cl(BTD)(CO)(PPh3)2] was characterised structurally. Ligand exchange reactions with bifunctional linkers bearing oxygen and sulfur donors provide access to tetra- and pentametallic complexes such as [{M{CH[double bond, length as m-dash]CH-bpyReCl(CO)3}(CO)(PPh3)2}2(S2CNC4H8NCS2)] and Fe[C5H4CO2M{CH[double bond, length as m-dash]CH-bpyReCl(CO)3}(CO)(PPh3)2]2. The effect of the group 8 metal on the photophysical properties of the rhenium centre was investigated using the complexes [Ru{CH[double bond, length as m-dash]CH-bpyReCl(CO)3}Cl(BTD)(CO)(PPh3)2] and [M{CH[double bond, length as m-dash]CH-bpyReCl(CO)3}{S2P(OEt)2}(CO)(PPh3)2] (M = Ru, Os). This revealed the quenching of the rhenium-based emission in favour of weak radiative processes based on the Ru and Os centres. The potential for exploiting this effect is illustrated by the reaction of [Ru{CH[double bond, length as m-dash]CH-bpyReCl(CO)3}Cl(CO)(BTD)(PPh3)2] with carbon monoxide, which results in a 5-fold fluorescence enhancement in the dicarbonyl product, [Ru{CH[double bond, length as m-dash]CH-bpyReCl(CO)3}Cl(CO)2(PPh3)2], as the quenching effect is disrupted.