Chromohalobacter salixigens contains a uronate dehydrogenase termed CsUDH that can convert uronic acids to their corresponding C1,C6-dicarboxy aldaric acids, an important enzyme reaction applicable for biotechnological use of sugar acids. To increase the thermal stability of this enzyme for biotechnological processes, directed evolution using gene family shuffling was applied, and the hits selected from 2-tier screening of a shuffled gene family library contained in total 16 mutations, only some of which when examined individually appreciably increased thermal stability. Most mutations, while having minimal or no effect on thermal stability when tested in isolation, were found to exhibit synergy when combined; CsUDH-inc containing all 16 mutations had ΔK t 0.5 +18 °C, such that k cat was unaffected by incubation for 1 hr at ~70 °C. X-ray crystal structure of CsUDH-inc showed tight packing of the mutated residue side-chains, and comparison of rescaled B-values showed no obvious differences between wild type and mutant structures. Activity of CsUDH-inc was severely depressed on glucuronic and galacturonic acids. Combining select combinations of only three mutations resulted in good or comparable activity on these uronic acids, while maintaining some improved thermostability with ΔK t 0.5 ~+ 10 °C, indicating potential to further thermally optimize CsUDH for hyperthermophilic reaction environments.

The enzyme galacturonate oxidoreductase PcGOR from Penicillium camemberti reduces the C-1 carbon of D-glucuronate and C-4 epimer D-galacturonate to their corresponding aldonic acids, important reactions in both pectin catabolism and ascorbate biosynthesis. PcGOR was active on both glucuronic acid and galacturonic acid, with similar substrate specificities (kcat/Km) using the preferred co-substrate NADPH. Substrate acceptance extended to lactone congeners, and D-glucurono-3,6-lactone was converted to L-gulono-1,4-lactone, an immediate precursor of ascorbate. Reaction with glucuronate showed only minor substrate inhibition, and the product L-gulonate and L-gulono-1,4-lactone were both found to be competitive inhibitors with Ki in the low mM range. In contrast, reaction with C-4 epimer galacturonate displayed marked substrate inhibition. Moreover, the product L-galactonate and L-galactono-1,4-lactone were observed to mitigate substrate inhibition by galacturonate, with the lactone having a greater effect than the acid.

Two GH43 beta-xylosidases, RS223-BX from a rice straw metagenomic library, and BoXA from Bacteroides ovatus, that share similar amino acid sequences (81% identical) and 19 of 20 active-site residues, were compared by using site-directed mutagenesis of Asp and His residues implicated in metal binding. Thus, RS223-BX is strongly activated by divalent-metal canons and the previously published X-ray structure of this enzyme shows that a Ca2+ cation is chelated by an active-site Asp carboxyl group and an active-site His. Mutation to Ala causes 90% loss of activity for the Asp mutant and 98% loss of activity for the His mutant, indicating their importance to catalysis. For the other enzyme (BoXA), mutation to Ala causes 20% loss of activity for the His mutant and 40% gain of activity for the Asp mutant, indicating the lack of importance for activity of the native residues and the lack of metal-dependency, given that the Asp residue occupies the active site to secure the metal cation in known metal ion dependent GH43 xylosidases. The high activity of the BoXA mutants compared to that of the analogous RS223-BX mutants further undermines the possibility that BoXA maintains a tightly bound metal cofactor resistant to EDTA extraction. The results strengthen our conclusion that the very similar proteins differ in one being metal ion dependent and one not.

d-Xylose sugar is a common component of hemicellulose, the second largest fraction of biomass. Many groups have developed biological conversions of d-xylose to value-added products by recombinant expression of the xylose dehydrogenase enzyme from Caulobacter crescentus. This enzyme uses NAD+ as a cofactor to oxidize d-xylose to d-xylono-1,4-lactone. A detailed understanding of the mechanism of this enzyme could be useful in engineering more efficient versions. Therefore, we have conducted kinetic studies including both the forward and reverse physiological reactions of this enzyme. We demonstrate that the enzyme's substrate binding mode follows a sequential steady state ordered mechanism with NAD+ or NADH binding first. Furthermore, the kcat of the reaction in the direction of NAD+ reduction is 10-fold higher than that of the reverse reaction. From rapid reaction studies, we demonstrate the binding of NAD+ and NADH to the free enzyme and that hydride transfer occurs in a fast step followed by a much slower steady state. We calculate that the dissociations of the sugar products from the enzyme complexes are the major rate limiting steps in both directions.

Divalent metal-activated glycoside hydrolase family 43 (GH43) β-xylosidases have been found to have high k cat/K m for xylooligosaccharides and may demonstrate high efficacy in industrial reactors digesting hemicellulose. By searching an amino acid database, we found a Bacteroides ovatus GH43 β-xylosidase termed BoXA that is 81% identical in overall amino acid sequence to a GH43, divalent metal-activated β-xylosidase with high k cat/K m, and also it has 19 of 20 residues in the active site conserved. However, unlike its metal-activated homolog, the B. ovatus enzyme does not lose activity after extensive EDTA treatment nor does it gain activity by addition of divalent metal ions. Thus, either it cannot be activated by divalent metal or it maintains a tightly bound, non-exchangeable metal ion. At 25 °C and pH 6.0, the k cat is 69 s−1 for xylobiose and k cat/K m is 210 s−1 mM−1 for xylotriose, with the latter being 0.7 that of the highest known value. The determined K i for d-glucose is 4.9 M, which is the highest known for a β-xylosidase. The enzyme has potential utility operating in bioreactors digesting plant biomass.

The gene RmGH28 from the organism Rhodothermus marinus, a putative glycosyl hydrolase family 28 polygalacturonase, was expressed in Escherichia coli and biochemically characterized. The gene was found to encode an exopolygalacturonase termed RmGH28, with galacturonic acid monomer and the polymer substrate (n-1) as the products released when acting on de-esterified polygalacturonic acid from citrus pectin. The enzyme at 25 °C had k cat ∼6 s−1 when acting on polygalacturonic acid, with K m ∼0.7 μM and a substrate inhibition constant K si ∼70 μM. The enzyme was hyperthermophilic, with one half initial enzyme activity remaining after 1-h incubation at 93.9 °C. Since the enzyme can function at high temperatures where reaction rates are increased and the risk of bacterial contamination is decreased, this indicates that RmGH28 can be useful in industry for generating galacturonic acid from pectin. The amino acid sequence of RmGH28 is highly homologous to the known hyperthermophilic exopolygalacturonases TtGH28 and Tm0437, which together can serve as starting points for structure-function studies and molecular breeding enzyme engineering approaches.

Lignocellulosic biomass represents a potentially large resource to supply the world's fuel and chemical feedstocks. Enzymatic bioconversion of this substrate offers a reliable strategy for accessing this material under mild reaction conditions. Owing to the complex nature of lignocellulose, many different enzymatic activities are required to function in concert to perform efficient transformation. In nature, large multienzyme complexes are known to effectively hydrolyze lignocellulose into constituent monomeric sugars. We created artificial complexes of enzymes, called rosettazymes, in order to hydrolyze glucuronoxylan, a common lignocellulose component, into its cognate sugar D-xylose and then further convert the D-xylose into D-xylonic acid, a Department of Energy top-30 platform chemical. Four different types of enzymes (endoxylanase, α-glucuronidase, β-xylosidase, and xylose dehydrogenase) were incorporated into the artificial complexes. We demonstrated that tethering our enzymes in a complex resulted in significantly more activity (up to 71%) than the same amount of enzymes free in solution. We also determined that varying the enzyme composition affected the level of complex-related activity enhancement as well as overall yield.

We recently reported on the kinetics of the polygalacturonase TtGH28 acting on trimer and dimer substrates. When the starting substrate for hydrolysis is the trimer, the product dimer is also subject to hydrolysis, resulting in discrepancies when either the concentration of dimer or monomer product is used for analysis of trimer hydrolysis. Here, we derive a method for determining catalytic rates of exo-hydrolases acting on trimer (and higher order) substrates when products may also be substrates for hydrolysis and show how this correction may be applied for TtGH28.

Hemicellulose biomass is a complex polymer with many different chemical constituents that can be utilized as industrial feedstocks. These molecules can be released from the polymer and transformed into value-added chemicals through multistep enzymatic pathways. Some bacteria produce cellulosomes which are assemblies composed of lignocellulolytic enzymes tethered to a large protein scaffold. Rosettasomes are artificial engineered ring scaffolds designed to mimic the bacterial cellulosome. Both cellulosomes and rosettasomes have been shown to facilitate much higher rates of biomass hydrolysis compared to the same enzymes free in solution. We investigated whether tethering enzymes involved in both biomass hydrolysis and oxidative transformation to glucaric acid onto a rosettasome scaffold would result in an analogous production enhancement in a combined hydrolysis and bioconversion metabolic pathway. Three different enzymes were used to hydrolyze birchwood hemicellulose and convert the substituents to glucaric acid, a top-12 DOE value added chemical feedstock derived from biomass. It was demonstrated that colocalizing the three different enzymes to the synthetic scaffold resulted in up to 40 % higher levels of product compared to uncomplexed enzymes.

D-galacturonic acid is a potential platform chemical comprising the principal component of pectin in the citrus processing waste stream. Several enzyme activities are required for the enzymatic production of galacturonic acid from pectin, including exo- and endo-polygalacturonases. The gene TtGH28 encoding a putative GH28 polygalacturonase from Pseudothermotoga thermarum DSM 5069 (Theth_0397, NCBI# AEH50492.1) was synthesized, expressed in Escherichia coli, and characterized. Alignment of the amino acid sequence of gene product TtGH28 with other GH28 proteins whose structures and details of their catalytic mechanism have been elucidated shows that three catalytic Asp residues and several other key active site residues are strictly conserved. Purified TtGH28 was dimeric and hyperthermostable, with K t (0.5)  = 86.3 °C. Kinetic parameters for activity on digalacturonic acid, trigalacturonic acid, and polygalacturonic acid were obtained. No substrate inhibition was observed for polygalacturonate, while the K si values for the oligogalacturonides were in the low mM range, and K i for product galacturonic acid was in the low μM range. Kinetic modeling of the progress of reaction showed that the enzyme is both fully exo- and fully non-processional.

Divalent metal-activated glycoside hydrolase family 43 (GH43) β-xylosidases have been found to have high kcat/Km for xylooligosaccharides and may demonstrate high efficacy in industrial reactors digesting hemicellulose. By searching an amino acid database, we found a Bacteroides ovatus GH43 β-xylosidase termed BoXA that is 81% identical in overall amino acid sequence to a GH43, divalent metal-activated β-xylosidase with high kcat/Km, and also it has 19 of 20 residues in the active site conserved. However, unlike its metal-activated homolog, the B. ovatus enzyme does not lose activity after extensive EDTA treatment nor does it gain activity by addition of divalent metal ions. Thus, either it cannot be activated by divalent metal or it maintains a tightly bound, non-exchangeable metal ion. At 25 °C and pH 6.0, the kcat is 69 s −1 for xylobiose and kcat/Km is 210 s −1 mM for xylotriose, with the latter being 0.7 that of the highest known value. The determined Ki for D-glucose is 4.9 M, which is the highest known for a β-xylosidase. The enzyme has potential utility operating in bioreactors digesting plant biomass.

The gene encoding RUM630-BX, a β-xylosidase/arabinofuranosidase, was identified from activity-based screening of a cow rumen metagenomic library. The recombinant enzyme is activated as much as 14-fold (kcat) by divalent metals Mg(2+), Mn(2+) and Co(2+) but not by Ca(2+), Ni(2+), and Zn(2+). Activation of RUM630-BX by Mg(2+) (t0.5 144 s) is slowed two-fold by prior incubation with substrate, consistent with the X-ray structure of closely related xylosidase RS223-BX that shows the divalent-metal activator is at the back of the active-site pocket so that bound substrate could block its entrance. The enzyme is considerably more active on natural substrates than artificial substrates, with activity (kcat/Km) of 299 s(-1) mM(-1) on xylotetraose being the highest reported.

Enzyme catalysts will be vital in the development of synthetic biology approaches for converting pectinic monosaccharides from citrus and beet processing waste streams to value-added materials. We describe here the biophysical and mechanistic characterization of uronate dehydrogenases from a wide variety of bacterial sources that convert galacturonic acid, the predominate building block of pectin from these plant sources, and glucuronic acid to their corresponding dicarboxylic acids galactarate and glucarate, the latter being a DOE top value biochemical from biomass. The enzymes from Pseudomonas syringae and Polaromonas naphthalenivorans were found to have the highest reported kcat(glucuronic acid) values, on the order of 220–270s−1. The thermal stability of this enzyme type is described for the first time here, where it was found that the Kt(0.5) value range was >20°C, and the enzyme from Chromohalobacter was moderately thermostable with Kt(0.5)=62.2°C. The binding mechanism for these bi-substrate enzymes was also investigated in initial rate experiments, where a predominately steady-state ordered binding pattern was indicated.

We report the X-ray crystal structure of a glycoside hydrolase family 43 β-xylosidase, RS223BX, which is strongly activated by the addition of divalent metal cations. The 2.69 Å structure reveals that the Ca2+ cation is located at the back of the active-site pocket. The Ca2+ is held in the active site by the carboxylate of D85, an “extra” acid residue in comparison to other GH43 active sites. The Ca2+ is in close contact with a histidine imidazole, which in turn is in contact with the catalytic base (D15) thus providing a mechanism for stabilizing the carboxylate anion of the base and achieve metal activation. The active-site pocket is mirrored by an “inactive-site” pocket of unknown function that resides on the opposite side of the monomer.

RS223-BX of glycoside hydrolase family 43 is a β-d-xylosidase that is strongly activated (kcat/Km as much as 116-fold) by the addition of divalent metal cations, Ca2+, Co2+, Fe2+, Mg2+, Mn2+ and Ni2+. Slow activation by Mg2+ was demonstrated (kon 0.013 s−1 mM−1, koff 0.008 s−1) at pH 7.0 and 25 °C. koff and kon values are independent of Mg2+ concentration, but koff and kon are slower in the presence of increasing levels of substrate 4-nitrophenyl-β-d-xylopyranoside. The kinetics strongly suggest that M2+ binds to the enzyme rapidly, forming E M2+, followed by slow isomerization to the activated enzyme, E∗ M2+. Moderately high values of kcat (7–30 s−1) were found for M2+-activated RS223-BX acting on xylobiose (natural substrate) at pH 7.0 and 25 °C. Certain M2+-activated RS223-BX exhibit the highest reported values of kcat/Km of any β-xylosidase acting on natural substrates: for example, at pH 7.0 and 25 °C, xylobiose (Mn2+, 190 s−1 mM−1), xylotriose (Ca2+, 150 s−1 mM−1) and xylotetraose (Ca2+, 260 s−1 mM−1). There is potential for the enzyme to add value to industrial saccharification operations at low substrate and high d-glucose and high d-xylose concentrations.

The hemicellulose xylan constitutes a major portion of plant biomass, a renewable feedstock available for conversion to biofuels and other bioproducts. β-xylosidase operates in the deconstruction of the polysaccharide to fermentable sugars. Glycoside hydrolase family 43 is recognized as a source of highly active β-xylosidases, some of which could have practical applications. The biochemical details of four GH43 β-xylosidases (those from Alkaliphilus metalliredigens QYMF, Bacillus pumilus, Bacillus subtilis subsp. subtilis str. 168, and Lactobacillus brevis ATCC 367) are examined here. Sedimentation equilibrium experiments indicate that the quaternary states of three of the enzymes are mixtures of monomers and homodimers (B. pumilus) or mixtures of homodimers and homotetramers (B. subtilis and L. brevis). k cat and k cat/K m values of the four enzymes are higher for xylobiose than for xylotriose, suggesting that the enzyme active sites comprise two subsites, as has been demonstrated by the X-ray structures of other GH43 β-xylosidases. The K i values for d-glucose (83.3–357 mM) and d-xylose (15.6–70.0 mM) of the four enzymes are moderately high. The four enzymes display good temperature (K t 0.5 ∼ 45 °C) and pH stabilities (>4.6 to <10.3). At pH 6.0 and 25 °C, the enzyme from L. brevis ATCC 367 displays the highest reported k cat and k cat/K m on natural substrates xylobiose (407 s−1, 138 s−1 mM−1), xylotriose (235 s−1, 80.8 s−1 mM−1), and xylotetraose (146 s−1, 32.6 s−1 mM−1).

Depolymerization of xylan, a major fraction of lignocellulosic biomass, releases xylose which can be converted into transportation fuels and chemical feedstocks. A requisite enzyme for the breakdown of xylan is β-xylosidase. A gene encoding the 324-amino acid β-xylosidase, RS223-BX, was cloned from an anaerobic mixed microbial culture. This glycoside hydrolase belongs to family 43. Unlike other GH43 enzymes, RS223-BX can be strongly activated by exogenously supplied Ca(2+), Co(2+), Fe(2+), Mg(2+), Mn(2+) and Ni(2+) (e.g., 28-fold by Mg(2+)) and it is inhibited by Cu(2+) or Zn(2+). Sedimentation equilibrium centrifugation experiments indicated that the divalent metal cations mediate multimerization of the enzyme from a dimeric to a tetrameric state, which have equal catalytic activity on an active-site basis. Compared to the determined active sites of other GH43 β-xylosidases, the predicted active site of RS223-BX contains two additional amino acids with carboxylated side chains that provide potential sites for divalent metal cations to reside. Thus, the divalent metal cations likely occupy the active site and participate in the catalytic mechanism. RS223-BX accepts as substrate xylobiose, arabinobiose, 4-nitrophenyl-β-D-xylopyranoside, and 4-nitrophenyl-α-L-arabinofuranoside. Additionally, the enzyme has good pH and temperature stabilities and a large K(i) for D-glucose (1.3 M), favorable properties for performance in saccharification reactors.