Disclaimer Text and Data Mining. Any automated analytical technique aimed at analysing text and data in digital form in order to generate information including - but not limited to - patterns, trends and correlations (so-called Text and Data Mining) may only be applied if it is done by a research organisation or cultural heritage institution solely for the purpose of (non-commercial) scientific research as mentioned in Clause 3 of Directive (EU) 2019/790 (the Digital Single Market Directive) and Clause 15n of the Dutch Copyright Act [Auteurswet]. Text and Data Mining for commercial purposes is not allowed; all rights in this respect are reserved pursuant to Clause 4 paragraph 3 of the Digital Single Market Directive and Clause 15o paragraph 1 of the Dutch Copyright Act.

Abstract Emplacement of submarine landslides, or mass‐transport deposits, can radically reshape the physiography of continental margins, and strongly influence subsequent sedimentary processes and dispersal patterns. Typically, progressive healing of the complicated relief generated by the submarine landslide occurs prior to progradation of sedimentary systems. However, subsurface and seabed examples show that submarine channels can incise directly into submarine landslides. Here, the evolution of a unique exhumed example of two adjacent, and partially contemporaneous, submarine channel‐fills is documented. The channels show deep incision (>75 m), and steep lateral margins (up to 70°), cut into a >200 m thick submarine landslide. The stepped basal erosion surface, and multiple terrace surfaces, are mantled by clasts (gravels to cobbles) reflecting periods of bedload‐derived sedimentation, punctuated by phases of downcutting and sediment bypass. The formation of multiple terrace surfaces in a low aspect ratio confinement is consistent with the episodic migration of knickpoints during entrenchment on the dip slope of the underlying submarine landslide. Overlying sandstone‐rich channel‐fills mark a change to aggradation. Laterally stacked channel bodies coincide with steps in the original large‐scale erosion surface, recording widening of the conduit; this is followed by tabular, highly aggradational fill. The upper fill, above a younger erosional surface, shows an abrupt change to partially confined tabular sandstones with normally graded caps, interpreted as lobe fringe deposits, which formed due to down‐dip confinement, followed by prograding lobe deposits. Overlying this, an up‐dip avulsion induced lobe switching and back‐stepping, and subsequent failure of a sandstone body up‐dip led to emplacement of a sandstone‐rich submarine landslide within the conduit. Collectively, this outcrop represents episodic knickpoint‐generated incision, and later infill, of a slope adjusting to equilibrium. The depositional signature of knickpoints is very different from existing models, but is probably reflective of other highly erosional settings undergoing large‐scale slope adjustment.

Scours, and scour fields, are common features on the modern seafloor of deep-marine systems, particularly downstream of submarine channels, and in channel-lobe-transition-zones. High-resolution images of the seafloor have improved the documentation of the large scale, coalescence, and distribution of these scours in deep-marine systems. However, their scale and high aspect ratio mean they can be challenging to identify in outcrop. Here, we document a large-scale, composite erosion surface from the exhumed deep-marine stratigraphy of Unit 5 from the Permian Karoo Basin succession in South Africa, which is interpreted to be present at the end of a submarine channel. This study utilizes 24 sedimentary logs, 2 cored boreholes, and extensive palaeocurrent and thickness data across a 126 km 2 study area. Sedimentary facies analysis, thickness variations and correlation panels allowed identification of a lower heterolithic-dominated part (up to 70 m thick) and an upper sandstone-dominated part (10–40 m thick) separated by an extensive erosion surface. The lower part comprises heterolithics with abundant current and sinusoidal ripples, which due to palaeocurrents, thickness trends and adjacent depositional environments is interpreted as the aggradational lobe complex fringes. The base of the upper part comprises 2-3 medium-bedded sandstone beds interpreted as precursor lobes cut by a 3–4 km wide, 1–2 km long, and up to 28 m deep, high aspect ratio (1:100) composite scour surface. The abrupt change from heterolithics to thick-bedded sandstones marks the establishment of a new sediment delivery system, which may have been triggered by an updip channel avulsion. The composite scour and subsequent sandstone fill support a change from erosion- and bypass-dominated flows to depositional flows, which might reflect increasingly sand-rich flows as a new sediment route matured. This study provides a unique outcrop example with 3D stratigraphic control of the record of a new sediment conduit, and development and fill of a large-scale composite scour surface at a channel mouth transition zone, providing a rare insight into how scours imaged on seafloor data can be filled and preserved in the rock record.

Thick shallow-marine successions associated with long-term transgressions are less well known than their thin, well-sorted counterparts, widely studied due to their potential to form good reservoirs. In these successions, particularly in storm-dominated examples, bioturbation can obliterate primary sedimentary characteristics, making stacking patterns and sequences difficult to define, and challenging our understanding of the main controls in their resulting depositional architecture. This study presents an example from the Jurassic of the Neuquén Basin (Argentina), with the aim to: a) refine the depositional model of a thick, shallow-marine succession associated with a long-term, early post-rift transgression, b) constrain multi-scale controls on stratigraphic architecture and lateral facies variability, and c) discuss their preservation and response to post-depositional processes. To do this, a <300 m-thick succession has been studied along a >10 km continuous exposure, with mapping, sedimentary logging and correlation of stratigraphic units, integrated with subsurface, biostratigraphic and ichnological data. The succession shows an overall retrogradational-aggradational-retrogradational stacking pattern, with several higher frequency regressive units (parasequences and parasequence sets, PSS). The lower part (PSS I) comprises laterally-discontinuous (10's of m) mouth-bars and distributary channel fills, dominated by several m-thick coarsening- and fining-up sandstone packages and m-scale erosive conglomeratic lenses. Above these, the succession (PSS II-IV) is composed by laterally-continuous (>100's of m) storm-dominated lower-shoreface to upper-offshore deposits, dominated by <1m-thick fine-grained and highly bioturbated tabular muddy sandstones and sandy mudstones, with rarely-preserved HCS and bioclastic-rich limestones; their internal characteristics and bed boundaries are diffuse due to pervasive bioturbation, suggesting overall low sedimentation rates and recurrent periods of colonization. The coarse-grained nature and lithology of the mouth bars and channel fills in the lower succession (PSS I) are consistent with a proximal sediment source, associated with erosion of intra-basinal highs. Its variable thickness, lateral distribution and onlap against underlying syn-rift deposits demonstrates partial infill of localized higher-accommodation areas. The well-sorted and finer-grained nature of the shoreface-offshore strata the middle and upper succession (PSS II-IV) indicates a more mature, distal source, with sediment redistributed by longshore currents, and then intensely bioturbated. These deposits display well-defined parasequences internally composed of laterally-continuous bedsets (<5 m-thick). They extend along the entire study area, but show a significant vertical thickness variability. The integration of outcrop and subsurface data mapping (well and seismic) reveals this variability records the stratigraphic response of transgression over a complex, regional-scale ramp-step and underfilled rift topography, which controlled the location of main thickness and facies changes, and promoted areas of favored biogenic reworking. This study offers new insights in how to interpret thick transgressive successions based on primary depositional mechanisms and postdepositional processes, and provides useful tools to understand and predict the nature and potential preservation of these deposits in limited subsurface datasets.

Thick (>100 m-thick), highly bioturbated storm-influenced shallow-marine deposits are not frequent in the stratigraphic record, but they tend to be common in aggradational to retrogradational successions. Individual storm-event beds have typically low preservation potential in these successions, yet depositional settings are characterized on the basis of storms processes. Here we present a sedimentological study of a thick, bioturbated exhumed succession deposited during the early post-rift stage of the Neuquen Basin (Argentina) and compare its stratigraphic record with examples worldwide, in order to discuss the potential factors controlling the total overprint of storm-event beds during several million years. The Bardas Blancas Formation being 170-220 m thick in the study area is dominated by muddy sandstones and sandy mudstones, and it also includes subordinate proportions of clean sandstones and pure mudstones, collectively representing different environments of a storm-influenced shoreface-offshore system. The offshore transition and proximal offshore strata invariably comprise intensely bioturbated deposits, with only a few preserved HCS-sandstone beds. The unit shows for most of its thickness a long-term aggradational pattern spanning 7-10 Myr and is associated with low riverine influence. By combining the observations and interpretations of the Bardas Blancas Formation with other subsurface and exhumed intensely bioturbated, shallow-marine successions, we dispute the general assumption that these are associated with low frequency or low magnitude of storms. Alternatively, we argue that the long-lived efficiency of benthic fauna on overprinting most if not all the storm-event beds that reached the offshore-transition sector, results from the combination of several factors: deposition in relatively confined marine depocentres, persistent low riverine influence, and long-term aggradational stacking pattern. As these conditions can develop in a variety of basin styles, such as rift, early post-rift, and foreland settings, the recognition of thick, bioturbated successions as the ones discussed here can be used to infer more realistic constrains for depositional models and better predict facies distribution in such storm-influenced systems.

Degradation of basin-margin clinothems around the shelf-edge rollover zone may lead to the generation of conduits through which gravity flows transport sediment downslope. Many studies from seismic-reflection data sets show these features, but they lack small-scale (centimetre to metre) sedimentary and stratigraphic observations on process interactions. Exhumed basin-margin clinothems in the Tanqua depocentre (Karoo Basin) provide seismic-reflection-scale geometries and internal details of architecture with depositional dip and strike control. At the Geelhoek locality, clinothem parasequences comprise siltstone-rich offshore deposits overlain by heterolithic prodelta facies and sandstone-dominated deformed mouth bars. Three of these parasequences are truncated by a steep (6 to 22 degrees), 100m deep and 15km wide asymmetrical composite erosion surface that delineates a shelf-incised canyon. The fill, from base to top comprises: (i) thick-bedded sandstone with intrabasinal clasts and multiple erosion surfaces; (ii) scour-based interbedded sandstone and siltstone with tractional structures; and (iii) inverse-graded to normal-graded siltstone beds. An overlying 55m thick coarsening-upward parasequence fills the upper section of the canyon and extends across its interfluves. Younger parasequences display progressively shallower gradients during progradation and healing of the local accommodation. The incision surface resulted from initial oversteepening and high sediment supply triggering deformation and collapse at the shelf edge, enhanced by a relative sea-level fall that did not result in subaerial exposure of the shelf edge. Previous work identified an underlying highly incised, sandstone-rich shelf-edge rollover zone across-margin strike, suggesting that there was migration in the zone of shelf edge to upper-slope incision over time. This study provides an unusual example of clinothem degradation and readjustment with three-dimensional control in an exhumed basin-margin succession. The work demonstrates that large-scale erosion surfaces can develop and migrate due to a combination of factors at the shelf-edge rollover zone and proposes additional criteria to predict clinothem incision and differential sediment bypass in consistently progradational systems.

Abstract The position and process regime of paralic systems relative to the shelf edge rollover is a major control on sediment transfer into deep water. The depositional strike and dip variability of an exhumed Permian shelf edge succession has been studied in the Paardeberg Ridge, Karoo Basin. Siltstone-rich slope turbidites are overlain by 25–75 m-thick prodelta parasequences. These are truncated by a 30 m-thick sandstone-prone unit of tabular or convex-topped sandstones, interpreted as wave-modified mouth bars, cut by multiple irregular concave-upwards erosive surfaces overlain by sandstones, interpreted as distributary channels. The stratigraphic context, lithofacies and architecture are consistent with a mixed-influence shelf edge delta; the erosional base to the unit marks a basinwards shift in facies, consistent with a sequence boundary. Channels become thicker, wider, more erosive and incise into deeper-water facies downdip and correlate with sandstone-rich upper slope turbidites, all of which support the bypass of sand across the rollover. The overall progradational stacking pattern results in a stratigraphic decrease in channel dimensions. The results of this study suggest a predictable relationship between channel geometry, facies and position on the shelf-to-slope profile under a mixed wave and fluvial process regime.