In low-dimensional superconductors, the interplay between quantum confinement and interfacial hybridization effects can reshape Cooper-pair wavefunctions and give rise to unconventional superconducting states. Here we use plasma-free confinement epitaxy assisted by a carbon buffer layer to synthesize a gallium trilayer sandwiched between graphene and a 6H-SiC(0001) substrate. Within this confined gallium layer, we demonstrate interfacial Ising-type superconductivity driven by atomic orbital hybridization. Electrical transport measurements reveal that the in-plane upper critical magnetic field reaches ~21.98 T at T = 400 mK, approximately 3.38 times the Pauli paramagnetic limit. Angle-resolved photoemission spectroscopy measurements, combined with theoretical calculations, confirm the presence of split Fermi surfaces with Ising-type spin textures at the K and K' valleys of the confined gallium layer, originating from strong hybridization with the SiC substrate. This work establishes a strategy for realizing unconventional pairing wavefunctions through the synergistic combination of quantum confinement and interfacial hybridization effects.

Spin-orbit torque (SOT) enables efficient electrical control of magnetization, offering a pathway toward low-power spintronic devices. Magnetic topological insulators (TIs), with spin-momentum-locked surface states and intrinsic ferromagnetism, provide a unique platform for switching the edge-current chirality in quantum anomalous Hall (QAH) insulators. Here, we employ molecular beam epitaxy to synthesize a series of magnetic TI trilayers with controlled layer thicknesses on heat-treated SrTiO3(111) substrates. Electrical transport measurements reveal that SOT-driven magnetization reversal and the associated switching of QAH edge current chirality are governed by a SrTiO3(111) substrate-induced charging effect, which generates a chemical potential asymmetry between the top and bottom magnetic TI layers. The switching polarity and efficiency are further tuned through heterostructure design, gate voltage, and an in-plane magnetic field. These findings identify chemical-potential asymmetry as the key mechanism for achieving a large SOT switching ratio and establish a route toward electrical control of edge current and QAH-based logic and memory devices.

Interface-induced superconductivity has recently been achieved by stacking a magnetic topological insulator layer on an antiferromagnetic FeTe layer. However, the mechanism driving this emergent superconductivity remains unclear. Here, we employ molecular beam epitaxy to grow a 1T-CrTe2 layer, a 2D ferromagnet with a Curie temperature up to room temperature, on a FeTe layer. These 1T-CrTe2/FeTe heterostructures show superconductivity with a critical temperature of ∼12 K. Through magnetic force microscopy measurements, we observe the Meissner effect on the surface of the 1T-CrTe2 layer. Our electrical transport measurements reveal that the 1T-CrTe2/FeTe heterostructures exhibit nonreciprocal charge transport behavior, characterized by a large magneto-chiral anisotropy coefficient. The enhanced nonreciprocal charge transport in 1T-CrTe2/FeTe heterostructures provides a promising platform for exploring the magnetically controllable superconducting diode effect.

Altermagnets with pronounced spin-splitting band structure, unconventional magnetic and crystal symmetries, and exotic magneto-transport properties have received immense interest in cutting-edge spintronics, materials science, and condensed matter physics research. Microscopic imaging of spontaneous magnetic domains and phases in altermagnets constitutes an important step for investigating their underlying material properties, mechanisms, and spin behaviors. Taking advantage of scanning-probe quantum microscopy, here we report nanoscale quantum sensing of a prototypical altermagnet candidate α-MnTe. We visualize evanescent magnetization and the associated magnetic domains in epitaxial MnTe films, which allows external magnetic fields to control the intrinsic altermagnetic order and configurations. By evaluating a series of MnTe films with different thicknesses down to the atomic scale, we further present evidence for the interfacial origin of the observed weak magnetization and show its correlation with the anomalous Hall effect in MnTe film. Our results advance the current understanding of emergent altermagnetism, providing insights into future material design of altermagnet-integrated spintronic devices.

Altermagnets have recently emerged as a new class of magnetic materials that combine compensated magnetic order with spin-split electronic band structures. In this work, we employ molecular beam epitaxy to grow MnTe thin films with controlled thickness on InP(111)A substrates. By performing angle-resolved photoemission spectroscopy measurements, we observe a large spin splitting of 230 meV for bulk bands well below the Fermi level and identify surface states that cross the Fermi level. Electrical transport measurements reveal that a robust anomalous Hall (AH) effect persists down to 2 K and an AH sign reversal occurs near 175 K. By systematically tuning film thickness, growth conditions, and interfacial structure, we demonstrate that the AH response in MnTe films originates from the Berry curvature of surface states rather than from bulk bands. Our first-principles calculations reveal that this surface-state-driven AH effect is imprinted by the bulk altermagnetic order and remains unchanged for terminations with opposite Mn magnetic orientations. Our results establish a unique surface transport probe of bulk altermagnetism, demonstrate interface engineering as an effective route to generate and control the AH effect in altermagnets, and provide a unified understanding of the AH response in altermagentic MnTe films.

Nonlinear transport provides a powerful probe of the quantum geometry of electronic wavefunctions in topological materials. While nonlinear responses from bulk quantum geometry and band topology are well understood, the role of boundary modes remains largely unexplored. In this work, we demonstrate boundary-bulk interplay in nonlinear transport, including second-harmonic Hall and nonreciprocal longitudinal responses, in molecular beam epitaxy-grown magnetic topological insulator heterostructures. We find that the nonlinear transport is maximized when the sample is tuned slightly away from well-quantized quantum anomalous Hall and axion insulator states. The sign and amplitude of the nonlinear responses depend on electrode configuration, magnetic order, and carrier type. Supported by symmetry analysis and nonlinear Landauer-Büttiker formalism, our findings demonstrate that nonlinear transport is governed by the interplay between boundary and bulk states. Our work highlights the critical role of electrodes in nonlinear transport and establishes boundary modes as a key origin of the giant nonlinear response in nearly bulk-insulating topological materials.

Interlayer exchange coupling (IEC) between two magnetic layers sandwiched by a nonmagnetic spacer layer plays a critical role in shaping the magnetic properties of such heterostructures. The quantum anomalous Hall (QAH) effect has been realized in a structure composed of two magnetically doped topological insulator (TI) layers separated by an undoped TI layer. In this work, we employ molecular beam epitaxy to synthesize a series of magnetic TI sandwiches with varying thicknesses of the middle TI spacer layer. The well-quantized QAH effect is observed in all these samples, and the IEC modulates its critical behavior between the top and bottom magnetic TI layers. Near the plateau phase transition (PPT), thinner QAH samples exhibit a two-dimensional critical metal behavior with nearly temperature-independent longitudinal resistance. In contrast, thicker QAH samples behave as a three-dimensional insulator with reduced longitudinal resistance at higher temperatures. We employ a magnetic TI Hamiltonian with random magnetic domains to understand the IEC-induced critical-metal-to-insulator transition observed near QAH PPT.

A quantum phase transition arises from competition between different ground states and is typically accessed by varying a single physical parameter near absolute zero temperature. The quantum anomalous Hall (QAH) effect with high Chern number C has recently been achieved in magnetic topological insulator (TI) multilayers. In this work, we employ molecular beam epitaxy to synthesize a series of magnetic TI penta-layers by varying the thickness of the middle magnetic TI layer, designated as m quintuple layers. Electrical transport measurements demonstrate a quantum phase transition between C = 1 and C = 2 QAH states. For m 1 and m 2, the sample exhibits the well-quantized C = 1 and C = 2 QAH states, respectively. For 1 m 2, we observe a monotonic decrease in Hall resistance from h/e2 to h/2e2 with increasing m, accompanied by a peak in the longitudinal resistance. The quantum phase transition between C = 1 and C = 2 QAH states is attributed to the weakening of the interlayer coupling between the top and the bottom C = 1 QAH layers. Our findings provide a scalable strategy for engineering QAH devices with a tunable Chern number. This approach enables precise control and enhanced functionality in chiral edge current-based electronic devices.

Dirac surface states in a topological insulator (TI) with proximity-induced superconductivity offer a promising platform for realizing Majorana physics. In this work, we demonstrate gate-tunable ambipolar Josephson current in lateral Josephson junction (JJ) devices based on bulk-insulating (Bi,Sb)2Te3 thin films grown by molecular beam epitaxy (MBE). For thinner films, the supercurrent exhibits pronounced gate-tunable ambipolar behavior and is significantly suppressed as the chemical potential approaches the Dirac point yet persists across it. In contrast, thicker films exhibit a much weaker ambipolar response. Moreover, we find that the supercurrent becomes significantly less resilient to external magnetic fields when the chemical potential is tuned near the Dirac point. By performing numerical simulations, we attribute the asymmetric supercurrent observed in thicker TI films to the coexistence of Dirac surface states and bulk conduction channels. The demonstration of gate-tunable ambipolar Josephson transport establishes a foundation for the future exploration of electrically tunable Majorana modes.

Nonlinear transport has emerged as a powerful approach to probe the quantum geometry of electronic wavefunctions, such as Berry curvature and quantum metric, in topological materials. While nonlinear responses governed by bulk quantum geometry and band topology are well understood, the role of boundary modes (e.g., edge, surface, and hinge states) in nonlinear transport of topological materials remains largely unexplored. In this work, we demonstrate boundary-bulk interplay in nonlinear transport, including second-harmonic Hall and nonreciprocal longitudinal responses, in molecular beam epitaxy-grown magnetic topological insulator heterostructures. We find that the nonlinear transport is maximized when the sample is tuned slightly away from the well-quantized states, including the quantum anomalous Hall and axion insulator states. The sign and amplitude of the nonlinear transport depend on electrode configuration, magnetic order, and carrier type, establishing boundary mode transport as the dominant contributor. These findings, supported by symmetry analysis and nonlinear Landauer-Büttiker formalism, demonstrate that nonlinear transport in topological materials is governed by the interplay between boundary and bulk states. We further derive a universal relation between different lead voltages from electrode geometry symmetry, which allows us to distinguish nonlinear boundary transport from bulk contributions. Our work highlights the critical role of electrodes in nonlinear transport, which is absent in nonlinear optics, and establishes boundary modes as a key origin of the giant nonlinear response in nearly bulk-insulating topological materials. This insight opens new opportunities for engineering nonlinear transport through boundary-bulk interplay in future device applications of topological materials.

The interface between two different materials can show unexpected quantum phenomena. In this study, we used molecular beam epitaxy to synthesize heterostructures formed by stacking together two magnetic materials, a ferromagnetic topological insulator (TI) and an antiferromagnetic iron chalcogenide (FeTe). We observed emergent interface-induced superconductivity in these heterostructures and demonstrated the co-occurrence of superconductivity, ferromagnetism, and topological band structure in the magnetic TI layer-the three essential ingredients of chiral topological superconductivity (TSC). The unusual coexistence of ferromagnetism and superconductivity is accompanied by a high upper critical magnetic field that exceeds the Pauli paramagnetic limit for conventional superconductors at low temperatures. These magnetic TI/FeTe heterostructures with robust superconductivity and atomically sharp interfaces provide an ideal wafer-scale platform for the exploration of chiral TSC and Majorana physics.

The plateau phase transition in quantum anomalous Hall (QAH) insulators corresponds to a quantum state wherein a single magnetic domain gives way to multiple magnetic domains and then re-converges back to a single magnetic domain. The layer structure of the sample provides an external knob for adjusting the Chern number C of the QAH insulators. Here, we employ molecular beam epitaxy (MBE) to grow magnetic topological insulator (TI) multilayers with an asymmetric layer structure and realize the magnetic field-driven plateau phase transition between two QAH states with odd Chern number change {\Delta}C. In multilayer structures with C=+-1 and C=+-2 QAH states, we find two characteristic power-law behaviors between temperature and the scaling variables on the magnetic field at transition points. The critical exponents extracted for the plateau phase transitions with {\Delta}C=1 and {\Delta}C=3 in QAH insulators are found to be nearly identical, specifically, k1~0.390+-0.021 and k2~0.388+-0.015, respectively. We construct a four-layer Chalker-Coddington network model to understand the consistent critical exponents for the plateau phase transitions with {\Delta}C=1 and {\Delta}C=3. This work will motivate further investigations into the critical behaviors of plateau phase transitions with different {\Delta}C in QAH insulators and provide new opportunities for the development of QAH chiral edge current-based electronic and spintronic devices.

A quantum anomalous Hall (QAH) insulator is a topological phase in which the interior is insulating but electrical current flows along the edges of the sample in either a clockwise or counterclockwise direction, as dictated by the spontaneous magnetization orientation. Such a chiral edge current eliminates any backscattering, giving rise to quantized Hall resistance and zero longitudinal resistance. Here we fabricate mesoscopic QAH sandwich Hall bar devices and succeed in switching the edge current chirality through thermally assisted spin-orbit torque (SOT). The well-quantized QAH states before and after SOT switching with opposite edge current chiralities are demonstrated through four- and three-terminal measurements. We show that the SOT responsible for magnetization switching can be generated by both surface and bulk carriers. Our results further our understanding of the interplay between magnetism and topological states and usher in an easy and instantaneous method to manipulate the QAH state.

The nitrogen vacancy (NV) center in diamond is an increasingly popular quantum sensor for microscopy of electrical current, magnetization, and spins. However, efficient NV-sample integration with a robust, high-quality interface remains an outstanding challenge to realize scalable, high-throughput microscopy. In this work, we characterize a diamond micro-chip (DMC) containing a (111)-oriented NV ensemble; and demonstrate its utility for high-resolution quantum microscopy. We perform strain imaging of the DMC and find minimal detrimental strain variation across a field-of-view of tens of micrometer. We find good ensemble NV spin coherence and optical properties in the DMC, suitable for sensitive magnetometry. We then use the DMC to demonstrate wide-field microscopy of electrical current, and show that diffraction-limited quantum microscopy can be achieved. We also demonstrate the deterministic transfer of DMCs with multiple materials of interest for next-generation electronics and spintronics. Lastly, we develop a polymer-based technique for DMC placement. This work establishes the DMC's potential to expand the application of NV quantum microscopy in materials, device, geological, biomedical, and chemical sciences.

The interface of two materials can harbor unexpected emergent phenomena. One example is interface-induced superconductivity. In this work, we employ molecular beam epitaxy to grow a series of heterostructures formed by stacking together two nonsuperconducting antiferromagnetic materials, an intrinsic antiferromagnetic topological insulator MnBi2Te4 and an antiferromagnetic iron chalcogenide FeTe. Our electrical transport measurements reveal interface-induced superconductivity in these heterostructures. By performing scanning tunneling microscopy and spectroscopy measurements, we observe a proximity-induced superconducting gap on the top surface of the MnBi2Te4 layer, confirming the coexistence of superconductivity and antiferromagnetism in the MnBi2Te4 layer. Our findings will advance the fundamental inquiries into the topological superconducting phase in hybrid devices and provide a promising platform for the exploration of chiral Majorana physics in MnBi2Te4-based heterostructures.

To date, the quantum anomalous Hall effect has been realized in chromium (Cr)- and/or vanadium(V)-doped topological insulator (Bi,Sb)2Te3 thin films. In this work, we use molecular beam epitaxy to synthesize both V- and Cr-doped Bi2Te3 thin films with controlled dopant concentration. By performing magneto-transport measurements, we find that both systems show an unusual yet similar ferromagnetic response with respect to magnetic dopant concentration; specifically the Curie temperature does not increase monotonically but shows a local maximum at a critical dopant concentration. We attribute this unusual ferromagnetic response observed in Cr/V-doped Bi2Te3 thin films to the dopant-concentration-induced magnetic exchange interaction, which displays evolution from van Vleck-type ferromagnetism in a nontrivial magnetic topological insulator to Ruderman-Kittel-Kasuya-Yosida (RKKY)-type ferromagnetism in a trivial diluted magnetic semiconductor. Our work provides insights into the ferromagnetic properties of magnetically doped topological insulator thin films and facilitates the pursuit of high-temperature quantum anomalous Hall effect.

In quantum anomalous Hall (QAH) insulators, the interior is insulating but electrons can travel with zero resistance along one-dimensional (1D) conducting paths known as chiral edge channels (CECs). These CECs have been predicted to be confined to the 1D edges and exponentially decay in the two-dimensional (2D) bulk. In this Letter, we present the results of a systematic study of QAH devices fashioned in a Hall bar geometry of different widths under gate voltages. At the charge neutral point, the QAH effect persists in a Hall bar device with a width of only ∼72  nm, implying the intrinsic decaying length of CECs is less than ∼36  nm. In the electron-doped regime, we find that the Hall resistance deviates quickly from the quantized value when the sample width is less than 1  μm. Our theoretical calculations suggest that the wave function of CEC first decays exponentially and then shows a long tail due to disorder-induced bulk states. Therefore, the deviation from the quantized Hall resistance in narrow QAH samples originates from the interaction between two opposite CECs mediated by disorder-induced bulk states in QAH insulators, consistent with our experimental observations.

One-dimensional chiral interface channels can be created at the boundary of two quantum anomalous Hall (QAH) insulators with different Chern numbers. Such a QAH junction may function as a chiral edge current distributer at zero magnetic field, but its realization remains challenging. Here, by employing an in-situ mechanical mask, we use molecular beam epitaxy to synthesize QAH insulator junctions, in which two QAH insulators with different Chern numbers are connected along a one-dimensional junction. For the junction between Chern numbers of 1 and -1, we observe quantized transport and demonstrate the appearance of the two parallel propagating chiral interface channels along the magnetic domain wall at zero magnetic field. For the junction between Chern numbers of 1 and 2, our quantized transport shows that a single chiral interface channel appears at the interface. Our work lays the foundation for the development of QAH insulator-based electronic and spintronic devices and topological chiral networks.

An axion insulator is a three-dimensional (3D) topological insulator (TI), in which the bulk maintains the time-reversal symmetry or inversion symmetry but the surface states are gapped by surface magnetization. The axion insulator state has been observed in molecular beam epitaxy (MBE)-grown magnetically doped TI sandwiches and exfoliated intrinsic magnetic TI MnBi2Te4 flakes with an even number layer. All these samples have a thickness of ~ 10 nm, near the 2D-to-3D boundary. The coupling between the top and bottom surface states in thin samples may hinder the observation of quantized topological magnetoelectric response. Here, we employ MBE to synthesize magnetic TI sandwich heterostructures and find that the axion insulator state persists in a 3D sample with a thickness of ~ 106 nm. Our transport results show that the axion insulator state starts to emerge when the thickness of the middle undoped TI layer is greater than ~ 3 nm. The 3D hundred-nanometer-thick axion insulator provides a promising platform for the exploration of the topological magnetoelectric effect and other emergent magnetic topological states, such as the high-order TI phase.

The quantum anomalous Hall (QAH) insulator carries dissipation-free chiral edge current and thus provides a unique opportunity to develop energy-efficient transformative information technology. Despite promising advances, the QAH insulator has thus far eluded any practical applications. In addition to its low working temperature, the QAH state in magnetically doped topological insulators usually deteriorates with time in ambient conditions. In this work, we store three QAH devices with similar initial properties in different environments. The QAH device without a protection layer in air shows clear degradation and becomes hole-doped. The QAH device kept in an argon glovebox without a protection layer shows no measurable degradation after 560 h, and the device protected by a 3 nm AlOx protection layer in air shows minimal degradation with stable QAH properties. Our work shows a route to preserve the dissipation-free chiral edge state in QAH devices for potential applications in quantum information technology.