Longitudinal electron-beam diagnostics play a critical role in the operation and control of x-ray free-electron lasers, which rely on parameters such as the current profile, the longitudinal phase space, or the slice emittance of the particle distribution. On the one hand, the femtosecond-scale electron bunches produced at these facilities impose stringent requirements on the resolution achievable with the diagnostics. On the other, research and development of novel accelerator technologies such as beam-driven plasma-wakefield accelerators (PWFA) demand unprecedented capabilities to resolve the centroid offsets in the full transverse plane along the longitudinal bunch coordinate. We present the beam-based commissioning of an advanced X-band transverse-deflection rf structure (TDS) system with the new feature of providing variable polarization of the deflecting force: the PolariX-TDS. By means of a comprehensive campaign of measurements conducted with the prototype, key parameters of the rf performance of the system are validated and a phase-space characterization of an electron bunch is accomplished with a time resolution of 3.3 fs. Furthermore, an analysis of second-order effects induced on the bunch from its passage through the PolariX-TDS is presented.

The PolariX TDS (Polarizable X-Band Transverse Deflection Structure) is an innovative TDS-design operating in the X-band frequency-range. The design gives full control of the streaking plane, which can be tuned in order to characterize the projections of the beam distribution onto arbitrary transverse axes. This novel feature opens up new opportunities for detailed characterization of the electron beam. In this paper we present first measurements of the Polarix TDS at the FLASHForward beamline at DESY, including three-dimensional reconstruction of the charge-density distribution of the bunch and slice emittance measurements in both transverse directions. The experimental results open the path toward novel and more extensive beam characterization in the direction of multi-dimensional-beam-phase-space reconstruction.

Important progress has been achieved since the last PRC meeting towards establishing the necessary boundary conditions for enabling the realization of the first axion dark matter experiment with the necessary sensitivity to detect post-inflationary dark matter axions in the mass range around 100μeV. The project strategy has been refined, especially with respect to magnet development and procurement. Some important technological progress has been achieved in terms of development of the prototype booster. Given the necessary support from DESY and the other Madmax institutes, we believe a dark matter axion search experiment with starting date late 2025 is feasible. An important milestone in the timely realization of the project is the completion and operation of the prototype. We hereby ask the PRC to acknowledge the necessity and urgency of the fast implementation of the Madmax prototype. The Madmax collaboration very much appreciates the letter from the DESY Directorate expressing the interest of DESY to host and provide infrastructure and technical support for the iMadmax and Madmax experiments in addition to the current engagement of the group FH-ALPS. We ask the PRC to back this support and encourage DESY to explore options to further exploit DESYs’ expertise for Madmax:

A collaboration between DESY, PSI and CERN has developed and built an advanced modular X-band transverse deflection structure (TDS) system with the new feature of providing variable polarization of the deflecting force. The prototype of the novel X-band TDS, the polarizable X-band (PolariX) TDS, was fabricated at PSI following the high-precision tuning-free production process developed for the C-band Linac of the SwissFEL project. Bead-pull rf measurements were also performed at PSI to verify, in particular, that the polarization of the dipole fields does not have any rotation along the structure. The high-power test was performed at CERN and now the TDS is at DESY and has been installed in the FLASHForward beamline, where the first streaking experience with beam has been accomplished. We summarize in this paper the rf design of the TDS and its key components, such as the X-band pulse compressor, E-rotator, and phase shifter, the results of the bead-pull measurements and the high power test and finally the rf setup at DESY.

This Letter of Intent describes LUXE (Laser Und XFEL Experiment), an experiment that aims to use the high-quality and high-energy electron beam of the European XFEL and a powerful laser. The scientific objective of the experiment is to study quantum electrodynamics processes in the regime of strong fields. High-energy electrons, accelerated by the European XFEL linear accelerator, and high-energy photons, produced via Bremsstrahlung of those beam electrons, colliding with a laser beam shall experience an electric field up to three times larger than the Schwinger critical field (the field at which the vacuum itself is expected to become unstable and spark with spontaneous creation of electron-positron pairs) and access a new regime of quantum physics. The processes to be investigated, which include nonlinear Compton scattering and nonlinear Breit-Wheeler pair production, are relevant to a variety of phenomena in Nature, e.g. in the areas of astrophysics and collider physics and complement recent results in atomic physics. The setup requires in particular the extraction of a minute fraction of the electron bunches from the European XFEL accelerator, the installation of a powerful laser with sophisticated diagnostics, and an array of precision detectors optimised to measure electrons, positrons and photons. Physics sensitivity projections based on simulations are also provided.

High brightness electron sources for linac based free-electron lasers (FELs) are being developed at the Photo Injector Test facility at DESY, Zeuthen site (PITZ). Production of electron bunches with extremely small transverse emittance is the focus of the PITZ scientific program. The photoinjector optimization in 2008-2009 for a bunch charge of 1, 0.5, 0.25, and 0.1 nC resulted in measured emittance values which are beyond the requirements of the European XFEL [S. Rimjaem et al., Nucl. Instrum. Methods Phys. Res., Sect. A 671, 62 (2012)]. Several essential modifications were commissioned in 2010-2011 at PITZ, resulting in further improvement of the photoinjector performance. Significant improvement of the rf gun phase stability is a major contribution in the reduction of the measured transverse emittance. The old TESLA prototype booster was replaced by a new cut disk structure cavity. This allows acceleration of the electron beam to higher energies and supports much higher flexibility for stable booster operation as well as for longer rf pulses which is of vital importance especially for the emittance optimization of low charge bunches. The transverse phase space of the electron beam was optimized at PITZ for bunch charges in the range between 0.02 and 2 nC, where the quality of the beam measurements was preserved by utilizing long pulse train operation. The experimental optimization yielded worldwide unprecedented low normalized emittance beams in the whole charge range studied.