Large aperture superconducting solenoid magnets are needed for the production and capture of pions, which decay to create intense muon beams in future experiments to search for direct muon to electron conversion. The COMET experiment in Japan and the Mu2e experiment in the U.S. are jointly conducting research into the design of capture solenoid coils made from aluminum-stabilized NbTi superconductor that is cooled by conduction to a supply of liquid helium. A prototype coil of 1.3-m inner diameter, having four layers of eight turns each, has been wound with pure aluminum interlayer fins for the conduction cooling. The test coil includes two types of welded splices, two film heaters for quench studies, and extensive instrumentation to evaluate strain, temperature profiles, and coil voltages. Details of the cryogenic conduction cooling scheme, test systems design, and test program plans will be discussed.

A superconducting quadrupole magnet with splittable yoke has been designed for use in ILC Main Linac (ML) cryomodules. The splittable yoke allows assembly around the beam pipe, to avoid potential contamination of the superconducting RF cavities. The magnet is cooled by conduction and covers the full range of required ML field gradients. A critical requirement is stability of the magnetic center, at the level of 5 μm, for a 20% variation of the operating field. We report here the results of thermal, quench, and magnetic performance tests of a prototype splittable quadrupole, that were made up to the maximum design operating gradient in a conduction-cooled test cryostat.

With the first test of LQS03, the long quadrupole (LQ) R&D by LARP (the US LHC Accelerator Research Program, a collaboration of BNL, FNAL, LBNL, and SLAC) is approaching conclusion. LQS03 is the third 3.7-m-long quadrupole, with 90mm aperture, using a full new set of Nb3Sn coils. The LQS03 coils were made using 108/127 RRP strand (with 108 Nb3Sn subelements) produced by Oxford Superconducting Technology, whereas both previous models used 54/61 RRP strand (with 54 larger Nb3Sn subelements). In this paper, LQS03 test results are presented and discussed. The test results are also compared with the performances of the previous models. Observations are made for the future use of Nb3Sn in accelerator magnets.