Mineralising avian tendon is a widely used experimental model for studying collagen-guided mineralisation. Yet, the three-dimensional organisation and topology of its internal canal system have never been quantitatively characterised. We combined high-resolution micro-computed tomography (micro-CT) and scanning electron microscopy (SEM) to provide the first morphometric and topological analysis of the canalicular network in mineralised turkey gastrocnemius tendon. micro-CT revealed that unmineralised canals occupy approximately 34.6% of the mineralised tissue volume and form a single continuously connected network (99.8% of void volume), with a connectivity density of ~1.3 × 102 mm−3, a fractal dimension of 2.58, a degree of anisotropy DA = 0.87 [BoneJ convention, range 0–1], and a closed-loop topology. SEM revealed marked ultrastructural heterogeneity of the mineral phase across fascicle cross-sections, consistent with graded intrafibrillar-to-interfibrillar deposition. These findings establish the first quantitative morphometric framework for physiologically mineralising collagen tissue and support the use of turkey gastrocnemius tendon as a tractable model for studying mineralisation dynamics, enthesis biology, and the design of biomimetic scaffolds with controlled porosity and anisotropy.

Traditional orthodontic diagnostics rely significantly on lateral cephalometric radiographs, posing health risks due to ionising radiation, particularly in paediatric patients. Artificial intelligence (AI) represents a promising alternative by enabling predictions of cephalometric parameters from non-radiographic clinical data. This study evaluates the accuracy and clinical utility of CEPHCLINIC, an open-source AI software designed to predict conventional cephalometric measurements using clinical photographs and intraoral 3D scans, thus adhering to radiation protection principles. The dataset comprised 1255 subjects from the American Association of Orthodontists Foundation (AAOF) craniofacial collection, encompassing demographic and clinical variables (age, gender, overbite, overjet, facial dimensions). This dataset was randomly divided into training (80

In the Chondrichthyes Raja asterias and Myliobatis aquila and in the Teleost Sparus aurata, the appendicular skeleton of the pectoral fins (including the calcified structures of the mouth in M. aquila) was investigated to find out how the specific skeletal segments were formed and stiffened over the course of evolution, not only with regard to the adaptation of the ontogenesis of the cartilage “anlagen” to the mechanical requirements of locomotion in the water column, but also to the specific feeding habits (durophagy) of M. aquila. The morphology of the pectoral fins of the three species showed a different layout, characterized by the geometry of the basic units (aligned tesserae and calcified radial columns), which provide varied flexibility of the pectoral fins, suggesting an adaptation to the “pelagic” and “benthic” locomotion patterns in the environment where the species live. The morphology of the calcified structures in the mouth of M. aquila showed the presence of two different masticatory systems: the first (external) with the rows of teeth resting on the maxillary and mandibular arches, and the second (internal, in the oral cavity) with the symphyseal plates specialized for durophagy. Chemical–physical analyses revealed that the calcified cartilage matrix of the Chondrichthyes fin rays, teeth and durophagy plates is stiffened by the same Ca3(PO4)2 mineral phase deposed in the organic matrix of the Teleost S. aurata fins (with the characteristic SEM morphological texture of calcified bone matrix). The hitherto unknown presence of two different chewing systems in M. aquila documents an evolutionary adaptation to nutritional requirements that can be explained by two hypotheses: the coexistence of two functioning systems in current specimens, allowing for the ingestion of harder and softer prey (or plant food), or the persistence of a rudimentary dentition that is no longer used (vestigial dentition). Furthermore, the texture of the calcified matrix in teleost fishes, as observed by scanning electron microscopy, may indicate a bone-like organic matrix substrate, similar to that found in endochondral ossification.

This study investigates the growth and calcification of the appendicular skeleton in Raja asterias (Delaroche, 1809), a member of the Batoidea, to explore the relationship between histomorphology and the mechanics of batoid locomotion within the water column. Although much prior research has focused on the "tessellated pattern" in these fishes, the variable structure of the appendicular skeleton provides fresh insights into the understudied interplay between skeletal histomorphology and the mechanical functions of Batoidea fins. The shape and initial growth of fin cartilage are influenced by the orientation of chondrocyte mitoses prior to mineral deposition, with subsequent calcification playing a pivotal role in shaping skeletal architecture. This study documents two distinct growth patterns: "crustal" and "catenated." The crustal pattern is predominantly observed in larger skeletal elements, such as the central body structures (skull, rostrum, and jaws), girdles, pterygia, and compound radials, whereas fin radials follow the catenated growth pattern. Notably, early-stage chondrichthyan cartilage shares similarities with mammalian metaphyseal growth plate cartilage, though in chondrichthyans, the calcified matrix is not resorbed or replaced by bone. Additionally, a previously unrecognized calcification pattern is identified in the pelvic-fin radials of R. asterias, indicating that the mechanical demands of locomotion in the water column may have driven the evolution of variable fin flexibility in Batoidea. This flexibility is achieved through joint mobility (diarthroses and amphiarthroses), specialized fin structures, and the distinct calcification patterns of the pectoral and pelvic fins.

The calcified tissues of vertebrates are essentially represented by bone, cartilage, dentin and calcified tendons. In all these tissues a major hallmark of mineralization is the deposition of the inorganic phase on a pre-existing collagen template, but evident differences exist among these materials and the molecular details of the process are still incompletely understood. In this study, the ultrastructural aspects of the mineral phase of these tissues were investigated by means of high-resolution scanning electron microscopy (HR-SEM) after low-temperature thermal deproteination, a technique allowing a direct, unrestricted visualization of the mineral component. Each tissue showed distinctive features. In most cases, calcification proceeds in a discontinuous way through the formation of clumps or clusters of mineralized tissue; in all cases, except cartilage, the mineral phase shows an evident relationship with the layout and/or the D-period of the collagen fibrils. Our results highlight the peculiar aspect of the mineralization process in the cartilage with respect to the other tissues, all of them containing collagen type I instead of type II, and suggest that a different molecular mechanism may be at work. It is still unclear whether and how this may be related to the content, exclusive of cartilage, of collagen type II. The identification of the tissue-specific features exhibited by cartilage versus those shared by all the other three tissues, although from different species, requires further research on physiological calcification.

This study aimed to investigate the remineralization processes of dental enamel via scanning electron microscopy and observe the changes induced in the microstructure by oral hygiene products. More specifically, the effectiveness of Mentadent Professional Resilience was analyzed for its ability to demineralize erosion-affected enamel surfaces. This involved the sectioning of some teeth to preserve enamel integrity, followed by dehydration and preparation for SEM analysis. SEM observations were made at various magnifications to detect differences in enamel morphology after treatment with the product. These observations provide valuable insights into the mechanisms of action of dental care products and their potential to protect enamel. The study makes a contribution to our understanding of remineralization processes and describes the importance of microscopic analysis for evaluating and developing effective dental products.

The science of dental tissue grafting is evolving, with an increased understanding of factors influencing graft behavior. Despite the widespread clinical use of soft tissue grafts, the histological characteristics of different gingival harvesting sites are still underexplored. This study aimed to fill this gap by analyzing 50 tissue samples harvested from 25 patients across three sites: the hard palate, maxillary tuberosity, and palatal rugae. Each sample underwent thorough histological and histomorphometric analysis. Conventional statistical analysis was performed using SPSS, while predictive modeling was conducted with RapidMiner Studio. The study identified significant histological differences among the graft sites, with notable variations in total graft height, epithelial height, and interdigitation perimeter. These findings underscore the importance of donor site selection in influencing graft success. Pair plots and principal component analysis (PCA) further highlighted the distinct histological features of each tissue type. The random forest classifier identified total graft height, epithelial height, and perimeter as the most influential factors in predicting graft site behavior. This study offers valuable insights into the histological characteristics of soft tissue grafts, potentially leading to more predictable clinical outcomes.

BACKGROUNDDespite their known negative effects on ecosystems and human health, synthetic pesticides are still largely used to control crop insect pests. Currently, the biopesticide market for insect biocontrol mainly relies on the entomopathogenic bacterium Bacillus thuringiensis (Bt). New biocontrol tools for crop protection might derive from fungi, in particular from Trichoderma spp., which are known producers of chitinases and other bioactive compounds able to negatively affect insect survival. RESULTSIn this study, we first developed an environmentally sustainable production process for obtaining chitinases from Trichoderma asperellum ICC012. Then, we investigated the biological effects of this chitinase preparation - alone or in combination with a Bt-based product - when orally administered to two lepidopteran species. Our results demonstrate that T. asperellum efficiently produces a multi-enzymatic cocktail able to alter the chitin microfibril network of the insect peritrophic matrix, resulting in delayed development and larval death. The co-administration of T. asperellum chitinases and sublethal concentrations of Bt toxins increased larval mortality. This synergistic effect was likely due to the higher amount of Bt toxins that passed the damaged peritrophic matrix and reached the target receptors on the midgut cells of chitinase-treated insects. CONCLUSIONOur findings may contribute to the development of an integrated pest management technology based on fungal chitinases that increase the efficacy of Bt-based products, mitigating the risk of Bt-resistance development. (c) 2024 Society of Chemical Industry.

Invasive alien plant species (IAPS) are a global problem, representing a threat to ecosystem functioning, biodiversity, and human health. Legislation requires the management and eradication of IAPS populations; yet, management practices are costly, require several interventions, and produce large amounts of waste biomass. However, the biomass of eradicated IAPS can become a resource by being used as feedstock for biochar production and, at the same time, implementing the management of IAPS. Here we carried out an in-depth characterization of biochar produced at 550 degrees C derived from 10 (five woody and five herbaceous) widespread IAPS in the central-southern Alps region to determine their potential applications for soil amendment, soil remediation, and carbon storage. Biochar was produced at a laboratory scale, where its physicochemical characteristics, micromorphological features, and lead adsorption from aqueous solutions were measured. To investigate any possible trade-offs among the potential biochar applications, a principal component analysis was performed. IAPS-derived biochars exhibited relevant properties in different fields of application, suggesting that IAPS biomass can be exploited in a circular economy framework. We found coordinated variation and trade-offs from biochars with high stability to biochars with high soil amendment potential (PC1), while the biochar soil remediation potential represents an independent axis of variation (PC2). Specifically, IAPS-derived biochar had species-specific characteristics, with differences between the woody and herbaceous IAPS, the latter being more suitable for soil amendment due to their greater pH, macronutrient content, and macropore area. Biochar derived from woody IAPS showed a greater surface area, smaller pores, and had higher lead adsorption potentials from aqueous solutions, hinting at their higher potential for heavy metal pollution remediation. Moreover, biochar derived from woody IAPS had a higher fixed carbon content, indicating higher carbon stability, and suggesting that their biochar is preferable for carbon sequestration in the view of climate change mitigation. Invasive alien plant species (IAPS) threaten ecosystem functioning, biodiversity, and human health. Their eradication produces large amounts of waste biomass that can become a resource as feedstock for biochar production, falling within the circular economy framework. The potential applications of IAPS-derived biochars for soil amendment, remediation, and carbon storage were determined by producing biochars from five woody and five herbaceous species and carrying out an in-depth characterization. Results indicate that biochars obtained from woody IAPS are suitable for soil remediation and carbon sequestration, and those obtained from herbaceous IAPS are suitable for soil amendment.image

Abstract AIM: This study explores dental enamel remineralization, employing Scanning Electron Microscopy (SEM) to unveil the microstructural changes induced by various dental care products. Focusing on Mentadent Professional Resilience, the research investigates its impact on enamel surfaces at a microscopic level. MATERIALS AND METHODS: The experimental approach involved precise tooth sectioning to preserve enamel integrity, followed by dehydration and SEM preparation. SEM analysis was conducted at multiple magnifications, revealing significant enamel texture and structure post-treatment variations. RESULTS: The findings demonstrate distinct differences in enamel surfaces, ranging from rough and rugged textures indicative of demineralization to smooth, intact surfaces suggesting effective remineralization. These observations provide crucial insights into the mechanisms of action of dental care products and their potential to promote enamel health. CONCLUSIONS: This study contributes to a deeper understanding of enamel remineralization processes and underscores the importance of microscopic analysis in evaluating and developing oral care products. The implications of these findings are significant for both dental research and clinical practice, offering a new perspective on the selection and efficacy of dental care products in enamel protection and caries prevention. CLINICAL RELEVANCE: The current investigations suggest that Mentadent Professional Resilience could be beneficial as a remineralizing agent.

Electron microscopy is essential for examining materials and biological samples at microscopic levels, providing detailed insights. Achieving high-quality imaging is often challenged by the potential damage high-energy beams can cause to sensitive samples. This study compares scanning electron microscopy (SEM) and transmission electron microscopy (TEM) to evaluate image quality, noise levels, and the ability to preserve delicate specimens. We used a modified SEM system with a transmitted electrons conversion accessory, allowing it to operate like a TEM but at lower voltages, thereby reducing sample damage. Our analysis included quantitative assessments of noise levels and texture characteristics such as entropy, contrast, dissimilarity, homogeneity, energy, and correlation. This comprehensive evaluation directly compared traditional TEM and the adapted SEM system across various images. The results showed that TEM provided images with higher clarity and significantly lower noise levels, reinforcing its status as the preferred method for detailed studies. However, the modified SEM system also produced high-quality images at very low acceleration voltages, which is crucial for imaging samples sensitive to high-energy exposure. The texture metrics analysis highlighted the strengths and limitations of each method, with TEM images exhibiting lower entropy and higher homogeneity, indicating smoother and more uniform textures. This study emphasizes the importance of selecting the appropriate electron microscopy method based on research needs, such as sample sensitivity and required detail level. With its conversion accessory, the modified SEM system is a versatile and valuable tool, offering a practical alternative to TEM for various applications. This research enhances our understanding of the capabilities and limitations of SEM and TEM. It paves the way for further innovations in electron microscopy techniques, improving their applicability for studying sensitive materials.

Before calcification begins, the early embryonic and fetal skeletal development of both mammalian Homo sapiens and the chondrichthyan fish Raja asterias consists exclusively of cartilage. This cartilage is formed and shaped through processes involving tissue segmentation and the frequency, distribution, and orientation of chondrocyte mitoses. In the subsequent developmental phase, mineral deposition in the cartilage matrix conditions the development further. The stiffness and structural layout of the mineralized cartilage have a significant impact on the shape of the anlagen (early formative structure of a tissue, a scaffold on which the new bone is formed) and the mechanical properties of the skeletal segments. The fundamental difference between the two studied species lies in how calcified cartilage serves as a scaffold for osteoblasts to deposit bone matrix, which is then remodeled. In contrast, chondrichthyans retain the calcified cartilage as the definitive skeletal structure. This study documents the distinct mineral deposition pattern in the cartilage of the chondrichthyan R. asterias, in which calcification progresses with the formation of focal calcification nuclei or “tesserae”. These are arranged on the flat surface of the endo-skeleton (crustal pattern) or aligned in columns (catenated pattern) in the radials of the appendicular skeleton. This anatomical structure is well adapted to meet the mechanical requirements of locomotion in the water column. Conversely, in terrestrial mammals, endochondral ossification (associated with the remodeling of the calcified matrix) provides limb bones with the necessary stiffness to withstand the strong bending and twisting stresses of terrestrial locomotion. In this study, radiographs of marine mammals (reproduced from previously published studies) document how the endochondral ossification in dolphin flippers adapts to the mechanical demands of aquatic locomotion. This adaptation includes the reduction in the length of the stylopodium and zeugopodium and an increase in the number of elements in the autopodium’s central rays.

Background Artificial Intelligence (AI) in dental diagnostics is evolving, offering innovative approaches for conducting cephalometric analysis with less manual input and overcoming the limitations of traditional imaging methods. To enhance the diagnostic processes in dentistry, an open-source software that utilises AI to improve the extraction of cephalometric values from limited field of view (FOV) images was created. Material and Methods Reduced FOV images lack several vital cephalometric landmarks, prompting the creation of predictive models to estimate missing values. The GridSearchCV algorithm and other algorithms were used to construct predictive models using software and to select the best models. The software was validated by comparing the predicted values with the actual measurements and calculating the mean squared error using Excel. Further validation involved a randomly selected cohort of 25 untreated orthodontic cases. Results Evaluation of the software showed that it was effective in accurately predicting key cephalometric measurements, suggesting that it could be a reliable tool for clinical use. However, some variations were noted in its predictive accuracy across different measurements, indicating areas that could benefit from further development. The software could align closely with the actual cephalometric measurements through detailed statistical analysis. Conclusions The integration of AI into cephalometric analysis with the software could represent progress, potentially leading to more efficient dental diagnostics and a reduction in the need for additional X-rays. This study aimed to advance the integration and refinement of AI in healthcare, focusing on minimising bias and understanding its impact on clinical decisions. In future studies, the application of AI in dental practice should be expanded to address these challenges. Clinical Significance Statement This software integrates AI into clinical practice to enhance the diagnostic and therapeutic phases for patient benefit. It enables precise and comprehensive cephalometric analyses using data previously considered insufficient, thereby reducing the need for X-rays and improving patient care.

Scanning electron microscopy (SEM) is a precious tool in materials science and morphology sciences, enabling detailed examination of materials at the nanoscale. However, precise and accurate sample repositioning during different observation sessions remains a significant challenge, impacting the quality and repeatability of SEM analyses. This study aimed to develop and evaluate a LEGO®-based sample positioning system for SEM analysis. The system was designed to consistently identify and align features across multiple repositioning cycles, maintain accurate positioning along the z-axis, minimize distortion, and provide repeatable and reliable results. The results indicated a high degree of precision and accuracy in the repositioning process, as evidenced by the minimal displacements, deviations in scaling and shearing, and the highly significant results (p < 0.001) obtained from the analysis of absolute translations and rotations. Moreover, the analyses were consistently replicated across six repetitions, underscoring the reliability of the observed results. While the findings suggest that the LEGO-based sample positioning system is promising for enhancing SEM analyses' quality and repeatability, further studies are needed to optimize the system's design and evaluate its performance in different SEM applications. Ultimately, this study contributes to the ongoing efforts to develop cost-effective, customizable, and accurate solutions for sample positioning in SEM, contributing to the advancement of materials science research and all SEM analysis requiring overtime observations of the same sample. RESEARCH HIGHLIGHTS: This study focused on the development and evaluation of a novel LEGO-based sample positioning system specifically designed for SEM analysis. One of the standout features of this system is its ability to consistently identify and align features across multiple repositioning cycles, showcasing its precision and reliability. To further understand the mechanical aspects of the SEM stage, we employed the Rambold Kontroll comparator, which provided a baseline understanding of its mechanical tolerance. The registration process results were particularly noteworthy, as they revealed high accuracy with minimal displacements. Furthermore, the consistent outcomes observed across multiple repetitions emphasize the reliability and robustness of the methods we employed in this research.

This study presents a scanning electron microscopy analysis of a failed PEEK retainer in an orthodontic patient. After 15 months of use, the patient reported a gap opening between teeth 41 and 42. The PEEK retainer was removed and sent for electron microscope analysis. To investigate the failure, scanning electron microscopy was employed to assess the microstructure and composition of the retainer at various magnifications. These findings suggest that the failure of the PEEK retainer was multifaceted, implicating factors such as material defects, manufacturing flaws, inadequate design, environmental factors, and patient-related factors. In conclusion, this scanning electron microscopy analysis offers valuable insights into the failure mechanisms of PEEK retainers in orthodontic applications. Further research is necessary to explore preventive strategies and optimize the design and fabrication of PEEK retainers, minimizing the occurrence of failures in orthodontic practice.

In the synovial joints the transition between the soft articular cartilage and the subchondral bone is mediated by a layer of calcified cartilage of structural and mechanical characteristics closer to those of bone. This layer, buried in the depth of articular cartilage, is not directly accessible and is mostly visualized in histological sections of decalcified tissue, where it appears as a darker strip in contact with the subchondral bone. In this study conventional histology and scanning electron microscopy (SEM) with secondary electron imaging (SE) or backscattered electron imaging (BSE) were used to discriminate the calcified and the uncalcified cartilage in high resolution on native, untreated tissue as well as in deproteinated or demineralized tissue. This approach evidenced a high heterogeneity of the calcified layer of articular cartilage. High resolution pictures revealed that the mineralization process originates by progressive accretion and confluence of individual, small mineral clusters, in a very different way from other hard tissues such as bone, dentin and mineralized tendons. Finally, selective removal of the soft matrix by thermal treatment allowed for the first time a face-on, unrestricted 3D view of the mineralization front.

We investigated the interfaces of the epiphyseal plate with over- and underlying bone segments using an integrated approach of histochemistry, microtomography and scanning electron microscopy (SEM) to overcome the inherent limitations of sections-based techniques. Microtomography was able to provide an unobstructed, frontal view of large expanses of the two bone surfaces facing the growth plate, while SEM observation after removal of the soft matrix granted an equally unhindered access with a higher resolution. The two interfaces appeared widely dissimilar. On the diaphyseal side the hypertrophic chondrocytes were arranged in tall columns packed in a sort of compact palisade; the interposed extracellular matrix was actively calcifying into a thick mineralized crust growing towards the epiphysis. Behind the mineralization front, histochemical data revealed a number of surviving cartilage islets which were being slowly remodelled into bone. In contrast, the epiphyseal side of the cartilage consisted of a relatively quiescent reserve zone whose mineralization was marginal in amount and discontinuous in extension; the epiphyseal bone consisted of a loose trabecular meshwork, with ample vascular spaces opening directly into the non-mineralized cartilage. On both sides the calcification process took place through the formation of spheroidal bodies 1-2 μm wide which gradually grew by apposition and coalesced into a solid mass, in a way distinctly different from that of bone and other calcified tissues.

In the last few years, considerable attention has been focused on the plastic-degrading capability of insects and their gut microbiota in order to develop novel, effective, and green strategies for plastic waste management. Although many analyses based on 16S rRNA gene sequencing are available, an in-depth analysis of the insect gut microbiome to identify genes with plastic-degrading potential is still lacking. In the present work, we aim to fill this gap using Black Soldier Fly (BSF) as insect model. BSF larvae have proven capability to efficiently bioconvert a wide variety of organic wastes but, surprisingly, have never been considered for plastic degradation. BSF larvae were reared on two widely used plastic polymers and shotgun metagenomics was exploited to evaluate if and how plastic-containing diets affect composition and functions of the gut microbial community. The high-definition picture of the BSF gut microbiome gave access for the first time to the genomes of culturable and unculturable microorganisms in the gut of insects reared on plastics and revealed that (i) plastics significantly shaped bacterial composition at species and strain level, and (ii) functions that trigger the degradation of the polymer chains, i.e., DyP-type peroxidases, multicopper oxidases, and alkane monooxygenases, were highly enriched in the metagenomes upon exposure to plastics, consistently with the evidences obtained by scanning electron microscopy and 1H nuclear magnetic resonance analyses on plastics. In addition to highlighting that the astonishing plasticity of the microbiota composition of BSF larvae is associated with functional shifts in the insect microbiome, the present work sets the stage for exploiting BSF larvae as “bioincubators” to isolate microbial strains and enzymes for the development of innovative plastic biodegradation strategies. However, most importantly, the larvae constitute a source of enzymes to be evolved and valorized by pioneering synthetic biology approaches.

Investigating morphological and molecular mechanisms that plants adopt in response to artificial biophilic lighting is crucial for implementing biophilic approaches in indoor environments. Also, studying the essential oils (EOs) composition in aromatic plants can help unveil the light influence on plant metabolism and open new investigative routes devoted to producing valuable molecules for human health and commercial applications. We assessed the growth performance and the EOs composition of Mentha x piperita and Ocimum basilicum grown under an innovative artificial biophilic lighting system (CoeLux®), that enables the simulation of natural sunlight with a realistic sun perception, and compared it to high-pressure sodium lamps (control) We found that plants grown under the CoeLux® light type experienced a general suppression of both above and belowground biomass, a high leaf area, and a lower leaf thickness, which might be related to the shade avoidance syndrome. The secondary metabolites composition in the plants' essential oils was scarcely affected by both light intensity and spectral composition of the CoeLux® light type, as similarities above 80% were observed with respect to the control light treatments and within both plant species. The major differences were detected with respect to the EOs extracted from plants grown under natural sunlight (52% similarity in M. piperita and 75% in O. basilicum). Overall, it can be speculated that the growth of these two aromatic plants under the CoeLux® lighting systems is a feasible strategy to improve biophilic approaches in closed environments that include both plants and artificial sunlight. Among the two plant species analyzed, O. basilicum showed an overall better performance in terms of both morphological traits and essential oil composition. To increase biomass production and enhance the EOs quality (e.g., higher menthol concentrations), further studies should focus on technical solutions to raise the light intensity irradiating plants during their growth under the CoeLux® lighting systems.

The macroscopic and microscopic morphology of the appendicular skeleton was studied in the two species Raja asterias (order Rajiformes) and Torpedo marmorata (Order Torpediniformes), comparing the organization and structural layout of pectoral, pelvic, and tail fin systems. The shape, surface area and portance of the T. marmorata pectoral fin system (hydrodynamic lift) were conditioned by the presence of the two electric organs in the disk central part, which reduced the pectoral fin surface area, suggesting a lower efficiency of the "flapping effectors" than those of R. asterias. Otherwise, radials' rays alignment, morphology and calcification pattern showed in both species the same structural layout characterized in the fin medial zone by stiffly paired columns of calcified tiles in the perpendicular plane to the flat batoid body, then revolving and in the horizontal plane to continue as separate mono-columnar rays in the fin lateral zone with a morphology suggesting fin stiffness variance between medial/lateral zone. Pelvic fins morphology was alike in the two species, however with different calcified tiles patterns of the 1st compound radial and pterygia in respect to the fin-rays articulating perpendicularly to the latter, whose tile rows lay-out was also different from that of the pectoral fins radials. The T. marmorata tail-caudal fin showed a muscular and connective scaffold capable of a significant oscillatory forward thrust. On the contrary, the R. asterias dorsal tail fins were stiffened by a scaffold of radials-like calcified segments. Histomorphology, heat-deproteination technique and morphometry provided new data on the wing-fins structural layout which can be correlated to the mechanics of the Batoid swimming behavior and suggested a cartilage-calcification process combining interstitial cartilage growth (as that of all vertebrates anlagen) and a mineral deposition with accretion of individual centers (the tiles). The resulting layout showed scattered zones of un-mineralized matrix within the calcified mass and a less compact texture of the matrix calcified fibers suggesting a possible way of fluid diffusion throughout the mineralized tissue. These observations could explain the survival of the embedded chondrocytes in absence of a canalicular system as that of the cortical bone.