Quantum error correction works effectively only if the error rate of gate operations is sufficiently low. However, some rare physical mechanisms can cause a temporary increase in the error rate that affects many qubits; examples include ionizing radiation in superconducting hardware and large deviations in the global control of atomic systems. We refer to such rare transient spikes in the gate error rate as error bursts. In this work, we investigate the resilience of the rotated surface code to generic error bursts. We assume that, after appropriate mitigation strategies, the spike in the error rate lasts for only a single syndrome-extraction cycle; we also assume that the enhanced error rate is uniform across the code block. Under these assumptions, and for a circuit-level depolarizing noise model, we perform Monte Carlo simulations to determine the regime in burst error rate and background error rate for which the memory time becomes arbitrarily long as the code block size grows. Our results indicate that suitable hardware mitigation methods combined with standard decoding methods may suffice to protect against transient error bursts in the rotated surface code.

Disorder in quantum many-body systems can drive transitions between ergodic and non-ergodic phases, yet the nature–and even the existence–of these transitions remains intensely debated. Using a two-dimensional array of superconducting qubits, we study an interacting spin model at finite temperature in a disordered landscape, tracking dynamics both in real space and in Hilbert space. Over a broad disorder range, we observe an intermediate non-ergodic regime with glass-like characteristics: physical observables become broadly distributed and some, but not all, degrees of freedom are effectively frozen. The Hilbert-space return probability shows slow power-law decay, consistent with finite-temperature quantum glassiness. In the same regime, we detect the onset of a finite Edwards-Anderson order parameter and the disappearance of spin diffusion. By contrast, at lower disorder, spin transport persists with a nonzero diffusion coefficient. Our results show that there is a transition out of the ergodic phase in two-dimensional systems.

One of the roadblocks towards the implementation of a fault-tolerant superconducting quantum processor is impacts of ionizing radiation with the qubit substrate. Such impacts temporarily elevate the density of quasiparticles (QPs) across the device, leading to correlated qubit error bursts. The most damaging errors, $T_1$ errors, stem from QP tunneling across the qubit Josephson junctions (JJs). Recently, we demonstrated that this type of error can be strongly suppressed by engineering the profile of superconducting gap at the JJs in a way that prevents QP tunneling. In this work, we identify a new type of impact-induced correlated error that persists in the presence of gap engineering. We observe that impacts shift the frequencies of the affected qubits, and thus lead to correlated phase errors. The frequency shifts are systematically negative, reach values up to $3\,{\rm MHz}$, and last for $\sim 1\,{\rm ms}$. We provide evidence that the shifts originate from QP-qubit interactions in the JJ region. Further, we demonstrate that the shift-induced phase errors can be detrimental to the performance of quantum error correction protocols.

Disorder-induced phenomena in quantum many-body systems pose significant challenges for analytical methods and numerical simulations at relevant time and system scales. To reduce the cost of disorder-sampling, we investigate quantum circuits initialized in states tunable to superpositions over all disorder configurations. In a translationally-invariant lattice gauge theory (LGT), these states can be interpreted as a superposition over gauge sectors. We observe localization in this LGT in the absence of disorder in one and two dimensions: perturbations fail to diffuse despite fully disorder-free evolution and initial states. However, Rényi entropy measurements reveal that superposition-prepared states fundamentally differ from those obtained by direct disorder sampling. Leveraging superposition, we propose an algorithm with a polynomial speedup in sampling disorder configurations, a longstanding challenge in many-body localization studies.

Quantum error correction (QEC) is the primary strategy for protecting a quantum computer from the environment1,2. The prerequisite of QEC is that errors must remain sufficiently rare, which requires perpetually adapting the control parameters of the computer to the drifting environmental conditions. The current solution to this problem is to terminate the entire quantum computation for recalibration, but it is incompatible with the long runtimes of future quantum algorithms3,4. Here we address this challenge by unifying calibration with computation. We grant the QEC process5-11 a dual role: its error-detection events are not only used to correct the logical quantum state but are also repurposed as a learning signal, teaching a reinforcement learning agent12-16 to continuously steer the control parameters and stabilize the quantum system during computation. We experimentally demonstrate this framework on a Willow superconducting processor, improving the logical stability of the surface code 3.5-fold against injected drift. By synthesizing our full suite of technological advances, we achieve record performance of the surface and colour codes, with average logical error per cycle of 7.72(9) × 10-4 and 8.19(14) × 10-3, respectively. Numerical simulations of large codes with tens of thousands of control parameters confirm the scalability of our RL framework, revealing an optimization speed that is independent of system size. This work thus enables a new paradigm: a quantum computer that learns from its errors and never stops computing.

Understanding how interacting particles approach thermal equilibrium is a major challenge of quantum simulators1,2. Unlocking the full potential of such systems towards this goal requires flexible initial state preparation, precise time evolution and extensive probes for final state characterization. Here we present a quantum simulator comprising 69 superconducting qubits that supports both universal quantum gates and high-fidelity analogue evolution, with performance beyond the reach of classical simulation in cross-entropy benchmarking experiments. This hybrid platform features more versatile measurement capabilities compared with analogue-only simulators, which we leverage here to reveal a coarsening-induced breakdown of Kibble-Zurek scaling predictions3 in the XY model, as well as signatures of the classical Kosterlitz-Thouless phase transition4. Moreover, the digital gates enable precise energy control, allowing us to study the effects of the eigenstate thermalization hypothesis5-7 in targeted parts of the eigenspectrum. We also demonstrate digital preparation of pairwise-entangled dimer states, and image the transport of energy and vorticity during subsequent thermalization in analogue evolution. These results establish the efficacy of superconducting analogue-digital quantum processors for preparing states across many-body spectra and unveiling their thermalization dynamics.

The prevailing view is that quantum phenomena can be harnessed to tackle certain problems beyond the reach of classical approaches. Quantifying this capability as a quantum-classical separation and demonstrating it on current quantum processors has remained elusive. Using a superconducting qubit processor, we show that quantum contextuality enables certain tasks to be performed with success probabilities beyond classical limits. With a few qubits, we illustrate quantum contextuality with the magic square game, as well as quantify it through a Kochen–Specker–Bell inequality violation. To examine many-body contextuality, we implement the N-player GHZ game and separately solve a 2D hidden linear function problem, exceeding classical success rate in both. Our work proposes novel ways to benchmark quantum processors using contextuality-based algorithms.

Recently, usage of detecting regions facilitated the discovery of new circuits for fault-tolerantly implementing the surface code. Building on these ideas, we present LUCI, a framework for constructing fault-tolerant circuits flexible enough to construct aperiodic and anisotropic circuits, making it a clear step towards quantum error correction beyond static codes. We show that LUCI can be used to adapt surface code circuits to lattices with imperfect qubit and coupler yield, a key challenge for fault-tolerant quantum computers using solid-state architectures. These circuits preserve spacelike distance for isolated broken couplers or isolated broken measure qubits in exchange for halving timelike distance, substantially reducing the penalty for dropout compared to the state of the art and creating opportunities in device architecture design. For qubit and coupler dropout rates of 1% and a patch diameter of 15, LUCI achieves an average spacelike distance of 13.1, compared to 9.1 for the best method in the literature. For a SI1000(0.001) circuit noise model, this translates to a 36x improvement in median logical error rate per round, a factor which increases with device performance. At these dropout and error rates, LUCI requires roughly 25% fewer physical qubits to reach algorithmically relevant one-in-a-trillion logical codeblock error rates.

We present two new types of syndrome extraction circuits for the color code. Our first construction, which after [M. McEwen, D. Bacon, and C. Gidney, Quantum 7, 1172 (2023)] we call the semi-wiggling color code, promises to mitigate leakage errors by periodically interchanging the roles of bulk data and measurement qubits. The second construction reduces circuit depth relative to [C. Gidney and C. Jones, arXiv:2312.08813 (2023)] by employing the CXSWAP gate instead of CNOT. This optimization leads to ∼ 10% improvement in teraquop footprint under the uniform error model with the physical error rate p=0.1%.

Quantum observables in the form of few-point correlators are the key to characterizing the dynamics of quantum many-body systems. In dynamics with fast entanglement generation, quantum observables generally become insensitive to the details of the underlying dynamics at long times due to the effects of scrambling. In experimental systems, repeated time-reversal protocols have been successfully implemented to restore sensitivities of quantum observables. Using a 103-qubit superconducting quantum processor, we characterize ergodic dynamics using the second-order out-of-time-order correlators, OTOC^(2). In contrast to dynamics without time reversal, OTOC^(2) are observed to remain sensitive to the underlying dynamics at long time scales. Furthermore, by inserting Pauli operators during quantum evolution and randomizing the phases of Pauli strings in the Heisenberg picture, we observe substantial changes in OTOC^(2) values. This indicates that OTOC^(2) is dominated by constructive interference between Pauli strings that form large loops in configuration space. The observed interference mechanism endows OTOC^(2) with a high degree of classical simulation complexity, which culminates in a set of large-scale OTOC^(2) measurements exceeding the simulation capacity of known classical algorithms. Further supported by an example of Hamiltonian learning through OTOC^(2), our results indicate a viable path to practical quantum advantage.

Recent work has shown that a hexagonal grid qubit layout, with only three couplers per qubit, is sufficient to implement the surface code with performance comparable to that of a traditional four-coupler layout [McEwen et al., 2023]. In this work we propose a method for handling broken qubits and couplers even in hex-grid surface code architectures, using an extension of the LUCI framework [Debroy et al., 2024]. We show that for isolated broken qubits, the circuit distance drops by one, while for isolated broken couplers, the distance drops by one in one or both bases. By providing a viable dropout strategy, we have removed a critical roadblock to the implementation of hexagonal qubit grids in hardware for large-scale quantum error correction.

The promise of fault-tolerant quantum computing is challenged by environmental drift that relentlessly degrades the quality of quantum operations. The contemporary solution, halting the entire quantum computation for recalibration, is unsustainable for the long runtimes of the future algorithms. We address this challenge by unifying calibration with computation, granting the quantum error correction process a dual role: its error detection events are not only used to correct the logical quantum state, but are also repurposed as a learning signal, teaching a reinforcement learning (RL) agent to continuously steer the physical control parameters and stabilize the quantum system during the computation. We experimentally demonstrate this framework on a Willow superconducting processor, improving the logical stability of the surface code 3.5-fold against injected drift. By synthesizing our full suite of technological advances, including RL fine-tuning of the entire system and near-optimal decoding, we achieve record performance of the surface and color codes, with average logical error per cycle of ε_L=7.72(9)×10^-4 and ε_L=8.19(14)×10^-3 respectively. Simulations of surface codes up to distance-15 with tens of thousands control parameters confirm the scalability of our RL framework, revealing an optimization speed that is independent of the system size. This work thus enables a new paradigm: a quantum computer that learns from its errors and never stops computing.

A remarkable characteristic of quantum computing is the potential for reliable computation despite faulty qubits. This can be achieved through quantum error correction, which is typically implemented by repeatedly applying static syndrome checks, permitting correction of logical information. Recently, the development of time-dynamic approaches to error correction has uncovered new codes and new code implementations. In this work, we experimentally demonstrate three time-dynamic implementations of the surface code, each offering a unique solution to hardware design challenges and introducing flexibility in surface code realization. First, we embed the surface code on a hexagonal lattice, reducing the necessary couplings per qubit from four to three. Second, we walk a surface code, swapping the role of data and measure qubits each round, achieving error correction with built-in removal of accumulated non-computational errors. Finally, we realize the surface code using iSWAP gates instead of the traditional CNOT, extending the set of viable gates for error correction without additional overhead. We measure the error suppression factor when scaling from distance-3 to distance-5 codes of Λ_35,hex = 2.15(2), Λ_35,walk = 1.69(6), and Λ_35,iSWAP = 1.56(2), achieving state-of-the-art error suppression for each. With detailed error budgeting, we explore their performance trade-offs and implications for hardware design. This work demonstrates that dynamic circuit approaches satisfy the demands for fault-tolerance and opens new alternative avenues for scalable hardware design.

The emergence of states with long-range correlations in a disordered landscape is rare, as disorder typically suppresses the particle mobility required for long-range coherence. But when more than two energy levels are available per site, disorder can induce resonances that locally enhance mobility. Here we explore phases arising from the interplay between disorder, kinetic energy, and interactions on a superconducting processor with qutrit readout and control. Compressibility measurements distinguish an incompressible Mott insulator from surrounding compressible phases and reveal signatures of glassiness, reflected in non-ergodic behavior. Spatially-resolved two-point correlator measurements identify regions of the phase diagram with a non-vanishing condensate fraction. We also visualize the spectrum by measuring the dynamical structure factor. A linearly-dispersing phonon mode materializes in the superfluid, appearing even when disorder is introduced to the clean Mott insulator. Our results provide strong experimental evidence for disorder-induced superfluidity.

A remarkable characteristic of quantum computing is the potential for reliable computation despite faulty qubits. This can be achieved through quantum error correction, which is typically implemented by repeatedly applying static syndrome checks, permitting correction of logical information. Recently, the development of time-dynamic approaches to error correction has enabled different codes and implementations that do not rely on static syndrome measurements. Here we experimentally demonstrate three time-dynamic implementations of the surface code, each offering a distinct solution to hardware design challenges faced by surface code realizations. First, we embed the surface code on a hexagonal lattice, reducing the necessary couplings per qubit from four to three. Second, we walk a surface code, swapping the role of data and measure qubits each round, achieving error correction with built-in removal of accumulated non-computational errors. Finally, we realize the surface code using iSWAP gates instead of the traditional CNOT, extending the set of viable gates for error correction without additional overhead. We measure the error suppression factor when scaling from distance-3 to distance-5 codes of Lambda 35,hex = 2.15(2), Lambda 35,walk = 1.69(6) and Lambda 35,iSWAP = 1.56(2), achieving state-of-the-art error suppression for each. Our work demonstrates that dynamic circuit approaches meet the demands for fault tolerance and enable alternative strategies for scalable hardware design.

Lattice gauge theories (LGTs)1-4 can be used to understand a wide range of phenomena, from elementary particle scattering in high-energy physics to effective descriptions of many-body interactions in materials5-7. Studying dynamical properties of emergent phases can be challenging, as it requires solving many-body problems that are generally beyond perturbative limits8-10. Here we investigate the dynamics of local excitations in a Z 2 LGT using a two-dimensional lattice of superconducting qubits. We first construct a simple variational circuit that prepares low-energy states that have a large overlap with the ground state; then we create charge excitations with local gates and simulate their quantum dynamics by means of a discretized time evolution. As the electric field coupling constant is increased, our measurements show signatures of transitioning from deconfined to confined dynamics. For confined excitations, the electric field induces a tension in the string connecting them. Our method allows us to experimentally image string dynamics in a (2+1)D LGT, from which we uncover two distinct regimes inside the confining phase: for weak confinement, the string fluctuates strongly in the transverse direction, whereas for strong confinement, transverse fluctuations are effectively frozen11,12. We also demonstrate a resonance condition at which dynamical string breaking is facilitated. Our LGT implementation on a quantum processor presents a new set of techniques for investigating emergent excitations and string dynamics.

Fault-tolerant quantum computing requires a universal gate set, but the necessary non-Clifford gates represent a significant resource cost for most quantum error correction architectures. Magic state cultivation offers an efficient alternative to resource-intensive distillation protocols; however, testing the proposal's assumptions represents a challenging departure from quantum memory experiments. We present an experimental study of magic state cultivation on a superconducting quantum processor. We implement cultivation, including code-switching into a surface code, and develop a fault-tolerant measurement protocol to bound the magic state fidelity. Cultivation reduces the error by a factor of 40, with a state fidelity of 0.9999(1) (retaining 8

Quantum error correction1-4 is essential for bridging the gap between the error rates of physical devices and the extremely low error rates required for quantum algorithms. Recent error-correction demonstrations on superconducting processors5-8 have focused primarily on the surface code9, which offers a high error threshold but poses limitations for logical operations. The colour code10 enables more efficient logic, but it requires more complex stabilizer measurements and decoding. Measuring these stabilizers in planar architectures such as superconducting qubits is challenging, and realizations of colour codes11-19 have not addressed performance scaling with code size on any platform. Here we present a comprehensive demonstration of the colour code on a superconducting processor8. Scaling the code distance from three to five suppresses logical errors by a factor of Λ3/5 = 1.56(4). Simulations indicate this performance is below the threshold of the colour code, and the colour code may become more efficient than the surface code following modest device improvements. We test transversal Clifford gates with logical randomized benchmarking20 and inject magic states21, a key resource for universal computation, achieving fidelities exceeding 99% with post-selection. Finally, we teleport logical states between colour codes using lattice surgery22. This work establishes the colour code as a compelling research direction to realize fault-tolerant quantum computation on superconducting processors in the near future.

Quantum error correction (QEC) provides a practical path to fault-tolerant quantum computing through scaling to large qubit numbers, assuming that physical errors are sufficiently uncorrelated in time and space. In superconducting qubit arrays, high-energy impact events can produce correlated errors, violating this key assumption. Following such an event, phonons with energy above the superconducting gap propagate throughout the device substrate, which in turn generate a temporary surge in quasiparticle (QP) density throughout the array. When these QPs tunnel across the qubits' Josephson junctions, they induce correlated errors. Engineering different superconducting gaps across the qubit's Josephson junctions provides a method to resist this form of QP tunneling. By fabricating all-aluminum transmon qubits with both strong and weak gap engineering on the same substrate, we observe starkly different responses during high-energy impact events. Strongly gap engineered qubits do not show any degradation in T_{1} during impact events, while weakly gap engineered qubits show events of correlated degradation in T_{1}. We also show that strongly gap engineered qubits are robust to QP poisoning from increasing optical illumination intensity, whereas weakly gap engineered qubits display rapid degradation in coherence. Based on these results, gap engineering mitigates the threat of high-energy impacts to QEC in superconducting qubit arrays.

Engineered dissipative reservoirs have the potential to steer many-body quantum systems toward correlated steady states useful for quantum simulation of high-temperature superconductivity or quantum magnetism. Using up to 49 superconducting qubits, we prepared low-energy states of the transverse-field Ising model through coupling to dissipative auxiliary qubits. In one dimension, we observed long-range quantum correlations and a ground-state fidelity of 0.86 for 18 qubits at the critical point. In two dimensions, we found mutual information that extends beyond nearest neighbors. Lastly, by coupling the system to auxiliaries emulating reservoirs with different chemical potentials, we explored transport in the quantum Heisenberg model. Our results establish engineered dissipation as a scalable alternative to unitary evolution for preparing entangled many-body states on noisy quantum processors.